JK Audio Daptor One User manual

Product Overview
Remote Broadcasting gone wireless! Connect Daptor One between the RJ-11 jack on your JK Audio
RemoteMix unit and the earpiece / headset jack of your wireless telephone for remote broadcasting
over a cell phone.
The Daptor One converts the 2.5 mm headset jack on your cell phone to a modular jack. This RJ-11
jack connects directly to most JK Audio RemoteMix series mixers. You will continue to use your
wireless phone to dial or answer the call, but you will use the microphones and headphones plugged
into your RemoteMix for sending and receiving audio.
Daptor One’s mini-hybrid circuit converts the earpiece and microphone signals into a balanced RJ-11
phone line signal. Mic signals from the RemoteMix are sent into the wireless phone, while the
earpiece signals from the wireless phone are sent into the RemoteMix headphones.
*Works with all wireless phones that accept generic third party earpiece / headsets
*Hybrid circuit minimizes crosstalk
*No battery or AC adapter needed
*Durable diecast aluminum construction
JK Audio
Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com
Wireless Telephone Adapter
Daptor One
Daptor One

Phone Line: RJ-11 modular phone line jack
Interface Jack: 1/4”TRS
includes 1/4” to 2.5 mm cable, tip and ring reversed
Size: 3.6” x 1.6” x 1.3” (9.2 x 4.1 x 3.3cm)
Weight: 6 ounces
Specifications:
JK Audio
Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com
Wireless Telephone Adapter
Daptor One
Daptor One
JK Audio, Inc.
Daptor One
Block Diagram
2/6/01 - WR
1/4“ TRS
Wireless
Jack
Dual
Transformer
Hybrid RJ-11
Modular
Jack
Daptor One was designed for use with JK Audio products only. It does not supply the necessary ring
voltage or talk battery which may be required by modems or other manufacturers remote consoles.
Daptor One is compatible with the following JK Audio products:
RemoteMix C+
RemoteMix 3
RemoteMix 3.m
RemoteMix Sport
RemoteMix 3x4
Innkeeper 1 and 1x Digital Hybrids