JK Audio Daptor Two User manual

Product Overview
You can now use your existing audio equipment for remote
broadcasts from any location. Simply plug DaptorTwo into the
2.5mm headset jack of any wireless cell phone that accepts a 3rd
party headset or earpiece. You can now send and receive audio
from your mixer or tape recorder through the cell phone. Your cell phone will recognize Daptor Two as
a headset which will disable the mic and speaker in the cell phone itself. You will need to use a
microphone and headphones connected to your mixer to allow conversation over your cell phone to
continue.
JK Audio
Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com
Wireless Telephone Adapter
Daptor Two
Daptor Two
!Works with all wireless phones that accept generic
third party earpiece / headsets
!No battery or AC adapter needed
!Durable diecast aluminum construction

Inputs: XLR 600 ohms balanced, line level, 0 dBm max input
1/4" mono, unbalanced, line level, 0 dBm max input
Outputs: XLR 600 ohms balanced, mic level, -25 dBm avg output
1/4" mono, unbalanced, mic level, -25 dBm avg output
Interface Jack: 1/4” - 3 conductor - 36" cable provided (1/4" - 3 conductor to 2.5mm - 3 conductor)
Passive, no AC or battery power needed
Size: 4.5" x 3.2" x 1.3"
(11.4 x 8.2 x 3.3 cm)
Weight: 9 ounces
Specifications:
JK Audio
Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com
Wireless Telephone Adapter
Daptor Two
Daptor Two
JK Audio, Inc.
Daptor Two
Block Diagram
12/13/01 - WR
1/4“ TRS
Wireless
Jack
Headset
Emulator
Circuit Transformer
Transformer
Limiter
1/4"
Send Jack
XLR
Send Jack
1/4"
Receive
Jack
XLR
Receive
Jack
(Disconnected
when 1/4" receive
jack is used)
(Disconnected
when 1/4" send
jack is used)