JLab Audio REWIND User manual

REWIND WIRELESS HEADPHONES
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
S
A
T
I
S
F
A
C
T
I
O
N
G
U
A
R
A
N
T
E
E
30
DAY
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
Learn more at jlabaudio.com/guarantee
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected] or visit jlabaudio.com/contact
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
Select “JLab Rewind” in your device settings to connect.
Light will slow blink blue when Bluetooth is paired.
Bluetooth
JLab Rewind
Settings
3
Press and hold button for
10 seconds. Release.
Light will blink red and blue
near the foam ear pad to
indicate pairing mode.
2
Turn on the Bluetooth
in your device settings.
Bluetooth
Settings
1
FIRST TIME SETUP: BLUETOOTH PAIRING
Notes:
•Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
•Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
PAIRING NEW / ADDITIONAL DEVICES:
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.

JLABAUDIO.COM
CHARGING
Note: Headphones will not turn on while charging.
Allow about 3 hours to fully charge.
Connect the Rewind Headphone to a computer or
USB 5V output device with the provided charging cable.
Red light will indicate charging and blue light will
indicate a full charge.
ACCESSORIES
MICRO USB
CABLE
2 SETS OF FOAM
EAR CUSHIONS
BLUETOOTH PAIRING:
(Follow First Time Setup instructions).
POWER ON: Press & hold 2 seconds.
POWER OFF: Press & hold 4 seconds.
(slow blinking blue light indicates power is on)
PLAY /PAUSE /ANSWER /HANG UP:
1 click.
ACTIVATE SIRI (iOS) OR
“OK GOOGLE” (ANDROID):
2 click.
TRACK FORWARD:
Press & hold 2 seconds.
OR
CHARGING
FULLY
CHARGED
BUTTON FUNCTIONS
EQUALIZER MODES
TOGGLE EQ CHANGE
3 click. (Rewind will cycle 3 EQ settings)
BASS BOOST
(Three Beeps)
Amplified bass
and sub-bass
BALANCED
(Two Beeps)
Even sound with no
additional sound
enhancements
JLab SIGNATURE
(One Beep)
JLab C3™ signature
sound with amplified
vocals and bass
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by
rapid pulling or extreme force, or bending the cable at a sharp
angle.
• Wax may build up in headphone cups, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume
or discontinuing use temporarily.
• If you experience regular discomfort while using this product,
discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice
pair of sunglasses and keep them in safe location when not in use.
WARM-UP YOUR HEADPHONES
Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at: jlabaudio.com/burnin