JOBO CRYSTAL 15 User manual

Photo Display
CRYSTAL 15
User Manual

Content
Introduction ............................................................................................................3
1.1. Main Features ....................................................................................................3
1.2. Specifications ....................................................................................................3
1.3. Getting Started – Set up the unit .........................................................................4
1.4. Control buttons and Slots ....................................................................................4
1.5. Using your Remote Control ..................................................................................5
2. Operating the unit ................................................................................................5
2.1. Main menu ........................................................................................................5
2.2. Viewing Photos ..................................................................................................6
2.3. Watching video files ...........................................................................................7
2.4. Listening to Music ..............................................................................................8
2.5. Playing slideshows with background music .............................................................8
2.6. Copying and Deleting Files ...................................................................................9
3. Connecting to a PC .............................................................................................. 10
4. Using the SETUP option ....................................................................................... 10
5. Calendar/Clock Display ......................................................................................... 11
6. Troubleshooting .................................................................................................. 11
7. Maintenance and Precaution ................................................................................. 12
8. Warranty conditions ............................................................................................ 12
9. Service .............................................................................................................. 13

1. Introduction
Congratulations on your purchase of the JOBO Photo Display CRYSTAL 15! Before operating the unit,
please read this manual thoroughly and retain it for future reference. Save the original box and all
packing material for future shipping needs.
This Photo Display lets you view digital pictures directly from your camera's memory cards. You will
be able to create a slideshow using multiple transition effects or display one picture at a time. No
computer, digital camera or Internet connection is required.
1.1. Main Features
Digital multimedia photo frame for photo, music and video playback*
Slide show with multiple transition effects, thumbnail view and still image
Combo mode for slideshow with background music
Easy operation with included remote control or buttons
Image Zoom and rotate function
Copy and delete function for all file formats
Clock and calendar
Auto power ON/OFF and Auto start selection (images, videos or music)
1.2. Specifications
Display: 15 inch (38.1 cm) colour TFT LCD
Resolution: 1024 x 768 pixels
Contrast ratio: 350:1
Brightness: 350 cd/m2
Aspect ratio: 4:3
Card slots for CF, SD, MMC, MS, xD; USB Flash drive
Supported photo formats: JPEG, BMP
Supported audio format: MP3
Supported video formats: MPEG1, MPEG2, MPEG4
Power supply: DC In 12 V, 3A
Working temperature: -20 to +65 degrees
Dimensions: 405 x 322 x 49 mm

1.3. Getting Started – Set up the unit
Open the package and remove the protective foam.
Remove the protective sleeve from the unit.
Install the stand of the frame at the back of the unit.
Plug in the AC adapter into the power outlet. Plug the other end into the unit.
After having stored the files on the target flash media (memory card or USB flash drive),
insert the media into the according slot.
1.4. Control buttons and Slots
DC Power
1 SM/XD
2
3
4
5
MS/SD/MMC CF/MD
1. AUTO/Exit 2. MENU/Play Pause 3. PREVIOUS / UP
4. NEXT / DOWN 5. POWER

1.5. Using your Remote Control
The following table briefly describes the functions of the remote control
2. Operating the unit
2.1. Main menu
Turning on the Photo Display , you will enter the “MENU” screen. Use the left/right arrow to go to
“Set up”. Press “Auto/PLAY” button to enter the options screen. Use the Up / down arrows to
choose your auto start option. Press the “Card selection” button to open the following menu:
Button Description
On/Off Switch on/off the frame
Card selection choose a memory card
VOL - Decrease volume
VOL + Increase Volume
Music go to and display music files
Photo go to and display photo files
Rotate Rotate the current picture
Slideshow Start the slideshow
Mute instantly mute volume
Zoom Zoom the current picture
Play/Pause and display OSD menu
Setup open menu for changing settings
Arrows Navigate on screen
Stop

Note: In all menus, pressing the “Card selection” button will bring you back to the main menu.
Function Description
Nand Play files from internal memory
Calendar Display calendar, clock, alarm
Setup Set system menu
SD/MMC/MS/XD Play files from SD/MMC/MS/XD memory card
CF Play files from CF memory card
USB Play files from USB flash drive
NOTE: Icons of above mentioned functions shall appear automatically on the MENU screen when a
memory card is inserted. Icons shall disappear when correspondent card is removed from the card
slot.
2.2. Viewing Photos
Make sure you have at least one picture on your memory card or your USB flash drive. After that:
Select the desired flash media from the main menu. (SD/XD/CF/MS/USB/NAND-Internal
Memory)
Select the “PHOTO” option from the menu and press “AUTO/PLAY”
A Photo thumbnail will appear. Using UP/DOWN/LEFT/RIGHT arrows you can move the
highlight. If the highlighted item is a folder, press “AUTO/PLAY” to enter the folder.
Press “AUTO/PLAY” to enter the slideshow mode.
Once a slideshow is playing or a picture is being shown, press the “AUTO/PLAY” button. The
following menu will appear:

Previous Play previous picture in the picture list
Play or Pause Play or pause the current slideshow
Next Play next picture in the picture list
Rotate Use the rotate function to change the picture
Orientation to either portrait or landscape format
Stop Stop slideshow and return to photo thumbnail
Zoom Increase the size of the picture by 2 /4 /8 or 16 times.
2.3. Watching video files
The Photo Display supports the following video formats:
Motion JPEG (.AVI): video format used by most digital cameras MPEG-I
MPEG-2
MPEG 4
Make sure you have at least one video on your memory card or your USB flash drive. When this is
done:
Select the desired flash media from the main menu (SD/XD/CF/MS/USB/NAND-Internal
Memory)
Select the “MOVIE” option from the menu and press “AUTO/PLAY”
Once a movie is playing, press the “AUTO/PLAY” button on the remote control. The following
menu will appear:

Previous Play previous movie in the play list
Fast Forward Play forward the movie by 2 /3 /4 times speed
Play or Pause Play or Pause the movie
Fast Backward Play backward the movie by 2 /3 /4 times speed
Next Play next movie in the play list
Stop Stop the movie and return to the play list
Zoom Increase the size of the picture by 2 /3 or 4 times.
2.4. Listening to Music
Make sure you have at least one MP3 file on your memory card or your USB flash drive. When this is
done:
Select the desired flash media from the main menu (SD/XD/CF/MS/USB/NAND-Internal
Memory)
Select the “MUSIC” option from the menu and press “AUTO/PLAY”
Press “VOL+” to increase the volume or “VOL-“ to decrease the volume on the remote control
Press “AUTO/PLAY ” button on the remote control to play or pause the music file
Press “STOP” button on the remote control to return to the card menu
2.5. Playing slideshows with background music
Ensure you have at least one picture on your memory card or your USB flash drive. Additionally, you
must have one MP3 file saved on the selected memory card/USB/Internal Memory. When this is
done:
Select the desired flash media from the main menu (SD/XD/CF/MS/USB/NAND-Internal
Memory)
Select the “FILE” option from the menu and press “Auto/PLAY”

Press “Slideshow” button on the remote control, an audio slideshow will begin
automatically.Once an audio slideshow is playing, press the “Auto/PLAY” button. The
following menu will appear:
Previous Play previous picture in the picture list
Play or Pause Play or pause the current slideshow
Next Play next picture in the picture list
Rotate Use the rotate function to change the picture
Orientation to either portrait or landscape format
Stop Stop the slideshow and return to photo thumbnail
Zoom Increase the size of the picture by 2 /4 /8 or 16 times
VOL Press VOL+ or VOL- on remote control to increase or
decrease the volume
2.6. Copying and Deleting Files
For copying and deleting files on your memory card, USB drive or internal memory (if applicable):
Select the desired flash media from the main menu (SD/XD/CF/MS/USB/NAND-Internal
Memory)
Select the “FILE” option from the menu and press “Auto/PLAY”
Press the “right arrow” to highlight the desired file. Repeat for all files that you want to
copy
Press the “SETUP” button to display the Copy and Delete menu. Select Copy function and
Press “PLAY” button to display the C:/ and D:/ menu .

Use “Up/Down” arrows to select the file destination folder. Press “Right” button to confirm.
Press “Auto/PLAY” to start copying the file.
Pressing “STOP” button will bring you back to the Copy and Delete menu.
Delete
Press the “right arrow” to highlight the desired file. Repeat for all files that you want to
copy
Press the “SETUP“ button to display the Copy and Delete menu. Select Delete function and
press “PLAY”. File will be deleted.
Press “STOP” button will bring you back to the Copy and Delete menu.
3. Connecting to a PC
The Photo Display has a USB port for connection to a PC (USB Slave) and a second USB port for
connection to other devices such as a Flash Drive, USB card reader (USB Host). When connected to
the PC you can drag-and-drop content from the PC to the internal memory (if applicable) or memory
card. You can also delete content from the internal memory.
NOTE: USB Slave and USB Host can not be used at the same time.
4. Using the SETUP option
Turning on the Photo Display , you will enter the MENU screen. Press the “SETUP” button on the
remote control to display the Setup menu. The following options can be changed by using the
“SETUP” option from the main menu:
Function Description
Language English, French, Spanish, German, Italian, Portuguese
Slideshow time Slideshow duration: 3s/5s/15s/1mins/15mins/1hr
Slideshow mode Off, Random, Fading, Expand to Top, Expand to Bottom, Expand to
Middle, Bottom to top, Top to bottom, Left to right, Right to left,
Door close, Door open, Horizontal Cross, Vertical Cross
Music Repeat Mode Repeat one, Repeat all, Repeat off
Movie Repeat Mode Repeat one, Repeat all, Repeat off
Display mode Normal, Wide
Time Year / Month / Date / Time setup
Alarm Alarm Time / Alarm Music / Alarm On/off setup
Brightness 0-16
Contrast 0-16
Saturation 0-16
Auto Power On Automatic start-up
Auto Power Off Automatic shut down
Auto Play Picture / Combo / Movie / Music / Calendar / Main Menu
Default Recover the factory default setup
NOTE: When entering the “setup” menu, you can only use the remote control for operation.
When setting the system function, the OSD buttons can’t be used for operation.