Joby SeaPal User manual

Instruction manual
SeaPal Bluetooth® Shutter Grip

Thank you for purchasing this SeaPal Bluetooth® Shutter
Grip.
Overview:
The SeaPal Bluetooth® Shutter Grip adds superior control
over your phone so you never miss a shot.
The SeaPal Bluetooth® Shutter Grip is simple to connect to
your phone and has a battery life that will allow years of use
before needing to be changed.
Please read the following instructions and care tips before
using your SeaPal Bluetooth® Shutter Grip for the rst time.
Whats in the box
• JOBY Bluetooth Shutter® Grip
• Instructions
• Mounting Hardware
Table of Contents
• Whats in the box
• Nomenclature
• Initial setup
• Using the JOBY Bluetooth Shutter®Grip underwater
• Safety information
• Maintenance
• Limit of liability
• Warranty
• Servicing

Nomenclature
Mounting Thread
Round Shutter Button
Constructed from High
Strength Polyurethane

Activating your Bluetooth Shutter Grip
• Unscrew the Back Knob
• Remove the Yellow Tab that is blocking the battery
connection
• Screw the Knob Back on hand tight
Connect the Bluetooth Shutter to your Phone
• Settings
• Turn on Bluetooth
• Hold down the red Shutter Button for about 3 seconds
• You will see the green light ash
• Connect to JOBY Shutter Grip
• Hit pair
Connect the Bluetooth Shutter to your JOBY SeaPal
Waterproof Case
• Use a at head screwdriver to screw the Bluetooth Shutter
to your JOBY SeaPal Waterproof Case
Safety information
• Do not exceed depths of 10m/33ft.
• Do not leave your gear in temperatures greater than 50 C
(125 F)
Maintenance
After each use, rinse it thoroughly in fresh water. Dry it before
storing. Store in a dry, cool area.
Warranty info, limit of liability
Thank you for purchasing a JOBY product.
JOBY products are warranted to be t for the purpose for
which they have been designed, and to be free from defects
in materials and workmanship.
This guarantee does not cover the product against
subsequent damage or misuse. As JOBY SeaPal products
are often used in extreme and volatile environments, we
are unable to cover for loss or damage of equipment. Loss
of income, reputation or other nancial expenses, such as
personal injury are also not covered by this warranty.
The period of validity of the Standard Limited Warranty is
dened by the law in force in the country, state or region
where the product is sold. Please retain your receipt as proof
of purchase.
How to get service?
After sales service:
www.joby.com
Videndum Media Solutions Spa
Via Valsugana 100 - 36022 Cassola (VI) - Italy
© 2023 Videndum Media Solutions Spa
JOBY is a registered trademark of Videndum Media
Solutions Spa

Compliance
FCC
FCC ID: XXXXXXXXXX <-
This device complies with
Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modications not expressly
approved by the parts responsible for compliance could void
the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CE
(EN) Hereby, Videndum Media Solutions Spa declares that
the SeaPal Bluetooth Shutter Grip radio equipment is in
compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
address: joby.com/certication.
(ES) Por la presente Videndum Media Solutions Spa declara
que el equipo de radio SeaPal Bluetooth Shutter Grip
cumple con la directiva 2014/53/UE. EI texto completo de la
declaración de conformidad de la UE está disponible en la
siguiente dirección de Internet: joby.com/certication.
(FR) Par la présente, Videndum Media Solutions Spa déclare
que l’équipement radio SeaPal Bluetooth Shutter Grip est
conforme à la directive 2014/53/UE. Le texte integral de la
déclaration de conformité de l’UE est disponible à ‘adresse
Internet suivante: joby.com/certication.

(PT) Por este meio, Videndum Media Salutions Spa declara
que o equipamento de radio SeaPal Bluetooth Shutter
Grip está em conformidade com a diretriz 20.14/53/UE O
texto completo da declaração de conformidade da UE está
disponível no seguinte endereço de internet: joby.com/
certication.
(IT) Videndum Media Solutions Spa dichiara che
l’apparecchiatura radio SeaPal Bluetooth Shutter Grip è
conforme alla direttiva 2014/53/UE. II testo integrale della
dichiarazione di conformità dell’UE è disponibile sul seguente
indirizzo internet: joby.com/certication.
(DE) Hiermit erklärt Videndum Media Solutions Spa, dass das
Funkgerät SeaPal Bluetooth Shutter Grip in Übereinstimmung
mit der Richtlinie 2014/53/EU steht. Der vollständige
Wortlaut der EU-Konformitätserklärung steht unter folgender
Internetadresse zur Verfügung: joby.com/certication.
IC
IC ID: XXXXXXXXXXX <-
(EN) Notice to Canadian users
This device complies with Industry
Canada license exempt RSS standard(s). Operation is subject
to the following two conditions:
• This device may not cause interference, and
• This device must accept any interference, including
interference that may cause undesired operation of the
device.
This device complies with RSS 247 of Industry Canada.
Operation is subject to the condition that this device does
not cause harmful interference.
This Class B digital apparatus complies with Canadian ICES
003.
(FR) Avis aux utilisateurs Canadiens
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Cet appareil numérique de la Classe B conforme à la norme
NMB 003 du Canada.