Johnson Controls S1-TTSCC01 Guide

Johnson Controls Unitary Products 542937-UUM-B-0212
USER’S INFORMATION
MANUAL
PREMIUM HIGH DEFINITION TOUCH
SCREEN COMMUNICATING CONTROL
MODELS: S1-TTSCC01 Energy Saver
Table of Contents
ABOUT YOUR COMMUNICATING
CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . 2
QUICK REFERENCE . . . . . . . . . . . . . . . 3
PROGRAMMING & OPERATION . . . . . . . . 5
DATE & TIME SETTINGS . . . . . . . . . . . 5
SYSTEM SETTINGS . . . . . . . . . . . . . . . 6
FAN SETTINGS . . . . . . . . . . . . . . . . . . . 6
HUMIDITY SETTINGS . . . . . . . . . . . . . . 7
SMART RECOVERY . . . . . . . . . . . . . . . 8
ENERGY SAVER SETTINGS . . . . . . . . 8
USING PROGRAM SCHEDULES . . . . . 8
TEMPERATURE OVERRIDE . . . . . . . . 13
SCHEDULE OVERRIDE . . . . . . . . . . . . 14
SPECIAL FEATURES . . . . . . . . . . . . . . 15
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . 20
LIMITED WARRANTY . . . . . . . . . . . . . . . . 20
Need Assistance?
For assistance with this product please visit http://www.yorkupg.com
Read and Save This Manual
All manuals and user guides at all-guides.com
all-guides.com

542937-UUM-B-0212
2 Johnson Controls Unitary Products
ABOUT YOUR COMMUNICATING CONTROL
Features
•Large, Clear Display with Backlighting – current temperature and temperature setpoint are
easy-to-read and are displayed on the home screen.
•Intuitive Programming – guides you through the scheduling process .
•Ability to Copy Multiple Days – allows you to easily customize the Communicating Control for
your unique schedule.
•Real-Time Clock – keeps time during power failure; automatically updates for daylight savings.
•Precise Temperature Control (+/- 1°F) (+/- .5°C) – reliable, consistent comfort.
•Multiple Schedule Hold/Override options – allow you to modify schedule indefinitely or for a
specific time.
•Change Reminders – reminds you to replace and maintain air filters, humidifier pad, UV bulbs,
and/or Electronic Air Cleaner filters.
•Outdoor Temperature Indication – shows current outdoor temperature on the display to help
you plan outdoor activities.
Never use sharp instruments, such as a pencil or pen, to press touch screen keys. To pre-
vent damage to the thermostat, always press keys with your fingertip.
Your brightness default settings are preset
to maximize the life of your Communicating
Control. Increasing the brightness levels
could potentially decrease the life of the
product. Brightness default settings for
your Communicating Control are set: Active
Mode Brightness 80% and Sleep Mode
Brightness 25%.
The Home and Menu screen may differ slightly, depending on your heating and/or cooling
system and the Communicating Control’s display settings.
OK
Cancel
Active Brightness:
50% 100%
Sleep Brightness:
Settings / Backlight
1%
80%
25%
80%
NOTICE
All manuals and user guides at all-guides.com

542937-UUM-B-0212
Johnson Controls Unitary Products 3
QUICK REFERENCE
Your new Communicating Control is preset to Non-Programmable View/Mode.
To change the View Mode:
The quick reference guide for each View/Mode is detailed in Figures 1-3.
FIGURE 1: Non-Programmable Mode
1. Press Menu in the bottom right corner of your
screen.
2. Press Settings icon.
3. Press View/Mode icon.
4. Select Non-Programmable, Programmable or
Advanced Programmable.
Select a mode for the Thermostat:
Select a sleep screen:
Cancel OK
Settings / View Mode
Non-
Programmable Programmable Advanced
Programmable
Home Temp Only
72
Menu
Auto
ON
71
°
30%Humidity
M
e
3
3
3
3
3
0
0
0
0
0
0
0
%
%
%
%
%
%
H
u
m
i
di
ty
ty
y
y
72°
11:07AM Thu 21 Jul
55°
Alert: Change Filter
Current Outdoor Temperature
(if communicating outdoor
equipment is installed)
Current Indoor
Temperature
Current
Date & Time
Temperature
Setpoint
Temperature
Adjustment
Quick
Help
Screen
Lock
System
Popup Alerts
Cool
Mode
Heat
Mode Menu
Current Indoor
Humidity (if display
setting is enabled)
Fan Setting
(if display setting
is enabled)
Humidity Setting
(if display
setting is enabled)
All manuals and user guides at all-guides.com

542937-UUM-B-0212
4 Johnson Controls Unitary Products
FIGURE 2: Programmable Mode
FIGURE 3: Advanced Programmable
74°
Menu
Alert: Change Filter
Auto
ON
72
°
30%Humidity
M
A
l
er
t
: C
ha
ha
ng
ng
e
e
Fi
Fi
l
l
t
t
e
r
3
3
3
3
3
3
0
0
0
0
0
0
0
0
0
%
%
%
%
%
%
%
%
H
u
m
i
d
i
ty
ty
y
y
78° 72°
CANCEL
74° to
10:00pm
11:07AM Thu 21 Jul
55°
Current Outdoor Temperature
(if communicating outdoor
equipment is installed)
Current Indoor
Temperature
Current
Date & Time
Temperature
Setpoint
Temperature
Adjustment
Quick
Help
Screen
Lock
System
Popup Alerts
Cool
Mode
Heat
Mode Menu
Current Indoor
Humidity (if display
setting is enabled)
Fan Setting
(if display setting
is enabled)
Humidity Setting
(if display
setting is enabled)
Program Override
Timer (if an override
is active)
Menu
Alert: Change Filter
Auto
ON
70°
30%Humidity
CANCEL
75° to
10:00pm
11:07AM Thu 21 Jul
M
A
l
er
t
: C
ha
ha
ng
ng
e
e
i
Fi
Fi
l
l
l
t
t
e
e
r
r
3
3
3
3
3
3
0
0
0
0
0
0
0
0
0
%
%
%
%
%
%
%
%
%
%
H
u
m
i
di
i
ty
ty
ty
y
C
AN
C
E
L
75
°
t
o
10
10
10
:0
:0
0p
m
72°
62°
78°
Current Outdoor Temperature
(if communicating outdoor
equipment is installed)
Current Indoor
Temperature
Current
Date & Time
Return to
Home Screen
Temperature
Override
Quick
Help
Screen
Lock
System
Popup Alerts
Cool
Mode
Heat
Mode Menu
Current Indoor
Humidity (if display
setting is enabled)
Fan Setting
(if display setting
is enabled)
Humidity Setting
(if display
setting is enabled)
Schedule
Override
Program Override
Timer (if an override
is active)
All manuals and user guides at all-guides.com

542937-UUM-B-0212
Johnson Controls Unitary Products 5
PROGRAMMING & OPERATION
DATE & TIME SETTINGS
1. Press Menu in the bottom right corner of your
screen.
2. Press Settings icon.
3. Press Date/Time icon.
4. Select Date - current month, day and year.
5. Select Clock - current hour, minutes and AM or
PM.
6. Select Clock Format (12hr or 24hr).
7. Select Daylight Saving Time (Yes or No).
NOTE: 2007 and beyond, for areas that use the
new 2007 DST calendar.
8. Press OK when you are done.
72°
Menu
Auto
ON
71
°
30%Humidity
3
3
3
3
0
0
0
0
0
%
%
%
%
%
di
t
y
y
72°
11:07AM Thu 21 Jul
55°
Alert: Change Filter
Schedule
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Date/Time Security Backlight Language
SoundTemp °F/°CView/Mode Maintenance
¿ ; ç
Settings
OK
OK
Cancel
Yes No
Observe Daylight
Date
Clock
08 May
00 AM
2009
:
Settings / Date/Time
Savings Time
24 hr
12 hr
Clock Format
OK
:
12
All manuals and user guides at all-guides.com

542937-UUM-B-0212
6 Johnson Controls Unitary Products
SYSTEM SETTINGS
Your Communicating Control is preset to OFF mode (neither heating or cooling modes are
selected).
In Non-Programmable mode, Auto mode cannot be activated. If Auto mode is desired, change the
View/Mode to either Programmable or Advanced Programmable (see page 5 for details).
FAN SETTINGS
In non-programmable mode, the fan setting defaults to the schedule currently active in the calendar.
In programmable mode, the fan setting defaults to schedule mode.
1. Press Menu at the bottom right side of your screen.
•Off mode: Neither Heating or Cooling icons are
illuminated.
•Heat mode: Heating icon is illuminated
(red glow ring indicates heat equipment opera-
tion).
•Cool mode: Cooling icon is illuminated
(blue glow ring indicates cool equipment opera-
tion).
•Auto mode: Both Heating and Cooling icons
are illuminated (red/blue glow ring indicates
heat/cool equipment operation).
•Emergency Heat: Emergency Heat button is
selected via the Menu screen
(only for heat pumps with electric heat strips or
heat pumps with furnace).
Or press the quick access Fan icon on the right side of your screen.
72°
Menu
Auto
ON
71
°
30%Humidity
3
3
3
3
0
0
0
0
0
%
%
%
%
%
di
t
y
y
72°
11:07AM Thu 21 Jul
55°
Alert: Change Filter
Schedule
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
NOTICE
All manuals and user guides at all-guides.com
all-guides.com

542937-UUM-B-0212
Johnson Controls Unitary Products 7
HUMIDITY SETTINGS
In non-programmable mode, your Communicating Control humidity setting defaults to auto mode.
In programmable mode, the humidity setting defaults to schedule mode.
1. Press Menu.
NOTE: Or press the quick access Humidity icon on
the right side of your screen.
2. Press Humidity icon.
3. Select the Humidity mode.
a. Humidification – Select the Heat mode sym-
bol.
b. Dehumidification – Select the Cool mode
symbol.
4. Select Humidity function.
a. Auto – Automatically sets the humidity set-
point based on indoor temperature.
NOTE: Auto mode requires an outdoor sensor.
b. Manual – Manually set the humidity setpoint.
i. Select your desired indoor humidity
percentage level.
NOTE: If you start seeing condensation building up
on your windows, lower the humidity setpoint or
switch to auto mode.
c. Schedule – Follows program schedule humidity settings (See Page 9 for more information).
NOTE: Schedule option is only available in programmable modes.
5. Select check box to display humidity information on home screen.
6. Press OK when you are done.
2. Press Fan icon.
3. Select the Fan function.
a. Auto – runs only with equipment.
b. Manual – runs intermittently to circulate air.
NOTE: Manual mode is not available for all sys-
tems. i. Adjust the speed of your fan motor.
NOTE: The lower the speed the less electricity con-
sumed.ii. Select the fan run time. Choices are 15,
30, and 45 minutes per hour or Always.
c. Schedule – follows program schedule fan
settings (see Page 9 for more information).
NOTE: Schedule option is only available in pro-
grammable modes.
4. Select check box to display fan icon on home
screen.
5. Press OK when you are done.
Schedule
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Emergency
Heat
Close
Alert: Change Filter
StatusHumidityFan Settings
Dealer Tools Clean
Per Hour
xx% 100%
OK
Cancel
Fan Adjust
30 minutes
Run fan
Auto ManualFunction:
45%
Show Fan on
Home
Schedule
Cancel
Show Humidity
Level on Home
When Heating...
Humidity Adjust
Auto Manual
22%
OK
Function:
Mode:
Schedule
35% 100%
Cancel
Humidity Adjust
OK
Show Humidity
Level on Home
When Heating...
Auto Manual
22%
45%
Function:
Mode:
Schedule
All manuals and user guides at all-guides.com

542937-UUM-B-0212
8 Johnson Controls Unitary Products
SMART RECOVERY
Your Communicating Control comes with a feature called Smart Recovery, which eliminates all
guesswork when setting your program schedule.
How long does it take the furnace to warm your house in the morning before you get out of bed or
how long does it take the air conditioner to cool your house in the afternoon before you return from
work? The Communicating Control determines the equipment start time to satisfy your desired tem-
perature setpoint.
Simply set your program schedule to the time you want the house to be at your comfort tempera-
ture. The Communicating Control then turns on the heating or cooling at just the right time to have
your home reach your comfort temperature at your scheduled time.
For example: you get out of bed at 6:00 AM and want the temperature to be 70°F. Set the Awake
period for 6:00 AM and 70°F. The Communicating Control will turn on the heat before 6:00 AM to
raise the temperature to 70°F by 6:00 AM.
ENERGY SAVER SETTINGS
Energy Saver feature allows you to program your system for maximum energy savings. You can
chose from two, three or four time periods each day, with different settings for each day.
This Communicating Control is preset to use Energy Saver program settings. These settings would
help reduce your heating/cooling expenses.
USING PROGRAM SCHEDULES
In a Non-Programmable mode, adjusting program schedule cannot be done.
Setpoints Fan Setting Setpoints
Heat Cool Hum Dehum
Awake (6:00 AM) 70° 78° Auto
Auto Auto
Day (8:00 AM) 62° 85° Auto
Return (5:00 PM) 70° 78° Auto
Sleep (10:00 PM) 62° 82° Auto
In order to edit or run a program schedule, change the View/Mode to either Programmable
or Advanced Programmable (see page 3 for details).
1. Press Menu.
2. Press Schedule icon.
NOTICE
Cancel Save
Assign to
Calendar
New Viewer
Edit
Copy
Delete
Import/
Export
Schedule
Energy Saver
Schedule 1
Schedule 2
Schedule 3
Create or edit schedules
All manuals and user guides at all-guides.com

542937-UUM-B-0212
Johnson Controls Unitary Products 9
Program Schedule Options
3. Press:
a. The New, Edit or Copy icons to create a new or edit an existing schedule. Refer Page 9.
b. The Delete icon to delete an existing schedule. Refer Page 12.
c. The Viewer icon to view existing schedule summaries. Refer Page 12.
d. The import/export icon to import or export a program schedule. Refer to Page 12.
e. The Assign to Calendar icon to assign an existing schedule to the calendar. Refer Page 12.
A. Creating New or Editing/Copying an Existing Schedule
Name
Day
Time
Step 1 - Press Edit icon.
a. Use the keyboard to name the schedule.
b. Press OK.
Step 2 - Press Next.
Step 3 - Select Day to set schedule.
Step 4 - Press Next.
NOTE: Each program schedule is identified by a
color. Color shades represent unique pro-
gram schedule settings.
Step 5 - Select Number of Events (2, 3or 4events
per day).
Step 6 - Select Event to set start time.
Step 7 - Adjust time that corresponds to the event.
Step 8 - Repeat steps 6-7 to select start time for
other events.
Step 9 - Press Next.
NextCancel
NAME DAY TIME TEMPERATURE FAN HUMIDITY
Please name this schedule...
Edit
Schedule 3
Schedule
Next
Schedule
NAME DAY TIME TEMPERATURE FAN HUMIDITY
Cancel
Default settings based on Energy Saver
Mo Tu Th Fr Sa SuWe
Schedule 3
Select day
to edit:
Save + Quit Previous
Next
Schedule
Cancel
NAME DAY TIME TEMPERATURE FAN HUMIDITY
Save + Quit Previous
23 4
Awake
6:00 am
Day
9:00 am
Return
6:00 pm
Sleep
10:00 pm
6:00 am
Wed
+ 15 min - 15 min
Number
of Events:
Select Event
to edit:
All manuals and user guides at all-guides.com

542937-UUM-B-0212
10 Johnson Controls Unitary Products
Temperature
Fan
Step 10 - Select Event to edit temperature set-
points.
Step 11 - Adjust your Heating and Cooling set-
points.
Step 12 - Select OK.
Step 13 - Repeat steps 10-12 to program tempera-
ture for other events.
Step 14 - Press Next.
Step 15 - Select Event to edit fan settings.
Step 16 - Select the Fan function.
a. Auto
b. Manual
NOTE: Manual mode is not available for all
systems. i. Adjust the speed of your fan motor.
NOTE: The lower the speed the less electricity
consumed. ii. Select the fan run time. Choices are
15, 30, and 45 minutes per hour or
Always.
Step 17 - Select OK.
Step 18 - Repeat steps 15-17 to select fan mode for
other events.
Step 19 - Press Next.
NAME DAY TIME TEMPERATURE FAN HUMIDITY
Awake Day Return Sleep
Wed
73° 70° 73° 70° 73° 70° 73° 70°
Schedule
Select Event
to edit:
NextCancel Save + Quit Previous
Schedule / Temperature Adjust
Adjust temperatures for Return
Cancel OK
50% 100%
85°50°
65°
75°
NAME DAY TIME TEMPERATURE FAN HUMIDITY
Schedule
NextCancel Previous
Awake
Auto
Day
85%
Return
Auto
Sleep
75%
Wed
Select Event
to edit:
Cancel OK
Schedule / Fan Adjust
Awake:
Auto Manual
Run fan
xx% 100%
Always
Function
45%
All manuals and user guides at all-guides.com