JONATHAN Y JYL2033A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE O
R
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material Avoid the use of chemicals and household cleaners as they may damage the finish
Model# JYL2033A
Product Dimensions: 15"L X 15"W X 59.5"H
th
e ma
t
er
i
a
l
.
A
vo
id
th
e use o
f
c
h
em
i
ca
l
s an
d
h
ouse
h
o
ld
c
l
eaners as
th
ey may
d
amage
th
e
fi
n
i
s
h
.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To red ce the risk of fire electrical shock or inj r to persons or propert please follo the g ideline belo
*
T
o re
d
uce t
h
e r
i
s
k
o
f
fi
re, e
l
ectr
i
ca
l
s
h
oc
k
or
i
n
j
ury to persons or property, p
l
ease
f
o
ll
ow t
h
e gu
id
e
li
ne
b
e
l
ow
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plu
g
(
one blade is wider than the other
)
as a safet
y
feature to reduce
ppppg( )y
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A.B.C.D
.E.F.G Lamp base 1X H Harp 1X
.E.F.G
E NECK 1X J Shade 1X
F Saddle 1X K Finial 1X
G Socket 1X I Bulb 1X
PREPARATION

PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
THERE
IS
LED
9
-
WATT
BULB
IN
THE
BOX
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the Harp (H) into the Saddle (F). Put the light on a level surface to check
Do not rotate lam
p
bod
y
too hard avoid base screw broken Put the shade
(
J
)
on the Har
p(
H
)
, then if ever
y
thin
g
is stable.
Do
not
rotate
lamp
body
too
hard
avoid
base
screw
broken
Put
the
shade(J)
on
the
Harp(H),
then
if
everything
is
stable.
Pull cord through lamp base(A) to tighten stem connections, tighten the Finial (K) into the Harp (H)
Screw the part (B) onto the base (A) Insert the bulb(I) into the socket(G).
Screw the part (C) onto the part (B)
Screw the part (D,E,F,G) onto the tube(C)
ENJOY YOUR LAMP