JONATHAN Y JYL9068A User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Model# JYL9068A
Product Dimensions: L28.5"*W15.75"*H62.5"
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
1X
PIECE DESCRIPTION PICTURE QUANTITY
Shade w/ tube
AD1X
PIECE DESCRIPTION PICTURE QUANTITY
Base
Srew
B4X E1X
Bulb
CTube 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE IS 1 X 4W LED BULB IN THE BOX.
Estimated Assembly Time: 6 minutes.
1
2
1
2
E
A
B
C
B
D
Step 1 Step 2
Make sure all parts could be aligned before assemble. Insert the bulb(E) into the socket.
Do not rotate lamp body too hard avoid base screw broken. Put the light on a level surface to check if everything is stable.
D
Do not rotate lamp body too hard avoid base screw broken. Put the light on a level surface to check if everything is stable.
Insert the Tube(C) into the Base(D) and tighten it with Screws(B),be sure to align
the holes in the Base(D) together with the holes in Tube (C).
Insert the Shade w/ tube(A) into the Tube(C) and tighten it with Screws(B), be sure
to align the holes in the Shade w/ tube(A) together with the holes in Tube (C).
to align the holes in the Shade w/ tube(A) together with the holes in Tube (C).
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP