JONATHAN Y JYL9050A User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Model# JYL9050A
Product Dimensions: Ø11.5 X 20.5"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock this plug will fit in a polarized outlet only one way if the plug does not fit fully in
the
risk
of
electric
shock
.
this
plug
will
fit
in
a
polarized
outlet
only
one
way
.
if
the
plug
does
not
fit
fully
in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A1X
Socket Ring Frame
PIECE DESCRIPTION PICTURE QUANTITY
1X
C
Lamp Body Bulb
1X 1X
BD

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE IS 1 X 4W LED BULB IN THE BOX.
Estimated
Assembly
Time:
6
minutes
.
1
2
3
2
A
C
A
B
CD
A
B
CD
Step 1 Step 2 Step 3
Unscrew the Socket Ring(A) from the Lamp Body(B). Insert the bulb(D) into the socket. Put the light on a level surface to check
A
B
CD
Place the Frame(C) onto the socket of the Lamp Body(B). if everything is stable.
Fix the Frame(C) in place by turning the Socket Ring(A)
clockwise till tight.
A
B
CD
ENJOY YOUR LAMP
A
B
CD