05 06
JOUlink AED JOUlink AED
Installation & Preparation
3
3.1 First Check
Check if the package seal and labeling are intact upon receipt. Open
the package and confirm all components listed below are included.
NameNO. Quantity Position
Main Unit
11 In the package
Battery Pack
22 In the main unit
User Manual
33 In the package
3.2 Connect and Activate
JOUlink can be activated by pairing with a Jousing’s iAED-S1 and
connecting to the Internet. Scan the QR code on the AED main unit for
detailed activation steps in the WeChat applet.
Functional Specifications
4
4.2 AED Routine Maintenance
Users can log in to JOUnet by using the account number
and password provided by Jousing Medical to check AED
operating status in real time.
Note: Please close the carrying case promptly after use to prevent unnecessary consumption of the data collector battery.
IssueNO. Possible Causes Recommended Action
1The status indicator is red. The data collector needs repair. Contact Jousing Medical for service.
2The low battery indicator is red. The battery power is low. Replace the battery pack.
3The activation button does not work. 1. No battery pack is installed.
2. The button has been damaged.
1. Install the battery pack.
2. Contact Jousing Medical for service.
4
After the activation button is pressed, the
data collector chirps three times and fails
to connect to the Internet.
Long press the button (hold for
more than 10 seconds).
Press the activation button for 1 second and
stop after the data collector chirps. The data
collector should activate and connect to the
Internet.
5
The status indicator and the AED link
indicator simultaneously flash for 5
seconds, while the data collector chirps
for 5 seconds.
The AED cannot be found.
1. Ensure the data collector is within 1
meter of the AED.
2. Ensure no other AED is switched on
within 5 meter of the data collector.
6
The status indicator and the Internet
connection indicator simultaneously flash
for 5 seconds, while the data collector
chirps for 5 seconds.
The data collector cannot connect
to the Internet.
Ensure your mobile phone signal is strong
(no less than 3 signal bars).
Troubleshooting
5
JOUlink can access and upload data such as the
operating status of the AED regularly (every week by
default). By using the account number and password
provided by Jousing Medical, users can log in to the AED
management system JOUnet (www.jousing.cn) or
WeChat applet “AED First-aid Map” to access information
such as AED location and status and the expiration dates
of its battery and pads.
If the AED malfunctions, please contact Jousing Medical
for service by using the “AED First-aid Map” applet or by
calling 400-820-9952.
The data collector updates location and starts audio recording automatically when it detects that the AED is turned on. The data
collector can also update information such as AED location to JOUnet in real time. Authorized users can monitor AED operation
on the cloud platform.
Once the carrying case is opened, the AED data collector
can monitor AED use in real time. The AED use can also
be reviewed on JOUnet;
4.1 AED Routine Maintenance
