Ⅴ.Routing:
Ⅰ.SAFETY INSTRUCTIONS:
Don't apply excessive force to the switches or controls.
Clean only with a clean dry cloth. Don't use inflammable substances such as
benzene, thinner, detergent and so on.
Do not place it in humid areas, so as to avoid damage to the internal circuits.
The operating voltage is DC9V, don't exceed it, otherwise the product will
malfunction.
The power adapter is not included in the packing list, please buy it separately.
Please make sure the polarity of your power adapter is the same with what is
printed on its outer housing, any error on power polarity would cause damage
to the product.
Please turn on your amplifier after this product is powered on.
Don't dump this product with household garbage. Proper treatment can
reduce pollution and health hazards. Please contact your local dealer for
correct approaches.
A B
*Disclaimer: any specification's update won't be amended in this manual
Modulation
Thank you for purchasing this product!
In order to use this product properly and safely, please read this owner's manual
carefully before operating this product, and keep it for future reference.
Ⅱ.FEATURES:
2 independent MODE modules contain 18 modulation effects.
Both MODE A and MODE B have its own independent adjustable parameters.
2 different connections ensure various tone combinations.
Independent TAP speed setting function.
Features stereo output.
1 2 345678 9
11 13
15
14 16 17 18
20
10 12
19
1.SPEED knob: adjusting the modulation
speed of MODE A.
2.TYPE A knob: 9 modulation effects of MODE A for your choice.
3.CONTROL knob: adjusting MODE A’s MODE effects characteristics.
4.DEPTH/MIX knob: adjusting MODE A’s MODE effects depth and mix
percentage.
5.TOGGLE SWITCH: choose MODE A and MODE B’s connection.(Please refer
to the detailed routing method)
6.DEPTH/MIX knob: adjusting MODE B’s MODE effects depth and mix
percentage.
7.RATE knob: adjusting the modulation speed of MODE B.
8.TYPE B knob: 9 modulation effects of MODE B for your choice.
9.CONTROL knob: adjusting MODE B’s MODE effects characteristics.
10.MODE A’s working status indicator: the indicator is in blue when MODE A
is on, once the TAP TAMPO is activated, the indicator is in blue and start
flickering, indicating the current tempo rate.
11.MODE A’s footswitch:
①It’s the switch controlling MODE A’s effects.
②Press the footswitch and hold to activate TAP TEMPO mode, then tap the
footswitch twice to set the speed of MODE effects.
12. MODE B’s working indicator: when MODE B is turned on, the indicator is
in blue, after the TAP TAMPO is activated, the indicator is in blue and start
flickering, indicating the current tempo rate.
13. MODE B footswitch:
①It's the switch controlling MODE B's effects.
②Press the footswitch and hold to activate TAP TEMPO mode, then tap the
footswitch twice to set the speed of MODE effects.
14. INPUT L Jack: please connect to this when it’s mono mode, and please
refer to the connection diagram for details.
15. INPUT R Jack
16. DC IN Jack: Power Jack(DC9V center minus)
17. OUTPUT L Jack: 1/4” L channel(mono track) output jack, used for
connecting to output signal or amp.
18. OUTPUT R Jack: 1/4” R channel output jack, used for connecting to output
signal or amp.
19. Ambience light: Please refer to number 20 to set up ambience light mode.
20. Ambience control switch
SYNC mode—the ambience light is blue light when the footswitch is turned on,
the ambience light goes off when the footswitch is turned off.
ALWAYS mode—the ambience light is blue.
OFF mode—the ambience light is off.
1.Mono connection
Guitar Power supply
Guitar amp
2.Stereo connection
Guitar
Power supply
Guitar amp 1
Guitar amp 2
3.Stereo output effects pedals’ connection
Guitar
Stereo output effects pedal
Power supply
Ⅲ.Parts names & functions:
Ⅳ.Connections:
Guitar amp 1
Guitar amp 2
There are 2 ways to connect MODE A and MODE B:
1 Series connection 2 Parallel connection
Turn on MODE A and MODE B simultaneously,
it means AB is in parallel connection:
Turn off MODE A, while turn on MODE B,
dry sound is in parallel connection with B:
Turn on MODE A, turn off MODE B,
the dry sound is in parallel connection with A:
Input: 1/4” mono audio interface x2( impedance )
Output: 1/4” mono audio interface x2( impedance100 Ohms)
Sample rate: 44.1K
Sampling accuracy: 24bit
Power supply: DC 9V(center minus)
Current: 170mA
Dimensions: 130*110*50mm
Weight: 425g
1M Ohms
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao'an, Shenzhen, 518101 China.
www.joyo-amps.com Email:info@joyoaudio.com Tel: 0086-755-29765381
JOYO Technology is committed to guarantee the highest quality standards. All Technical
Parameters or pictures are only for your information, subject to the actual products.
Ⅵ.Specifications:
