Joyonway P29B70 User manual

V2.0
P29B70
Simplified operation
instruction
English

1
English
operation instruction
I
1. Load connection
Properly connect the speakers according to the
speaker specification displayed in the diagram.
2. Power supply connection
Make power supply connection according to
the power supply specification displayed in
the diagram.
Shenzhen Joyonway Electronics & Technology CO.,LTD.
ADD : 4F,Section C,Building B6,China Merchants G uangming Science Park,
Guanguang Road 3009,Guangming New District,Shenzhen, China
BLUETOOTH AUDIO AMP
Input
: 100-240V~ 1.0A Frequency response: 20Hz – 20kHz
Output : sound channel 2.0 (2 * 15W/4Ω) Waterproof : IPX5
P29B70 Bluetooth 4.2
+
-
Power Input
100-240V~
1.0A
WIRING DIAGRAM
L N
Red
Black
Brown
-
Orange
+
All connecting lines for
the speakers : UL 2464
22AWG.
ADVI SE
Only serviced by qualified
personnel !
WARNING
4Ω/15W
Speaker1
4Ω/15W
Speaker2
POWER SPEAKER
Diagram
+
-
Red
Black
Brown
-
Orange
+
4Ω/15W
Speaker1
4Ω/15W
Speaker2
SPEAKER
Power Input
100-240V~
1.0A
L N
POWER
3. Music play operation
When the Bluetooth audio amplifier is powered on, search the Bluetooth named
“JOYONWAY” with your smart phone or ipad and make the connection. Then
music play can be realized with your smart phone or ipad.
II Equipment parameters
Power voltage input: 100-240V ~ 50-60Hz 1.0A
Power output：channel 2.0（2*15W/4Ω）
Bluetooth version：V4.2
Frequency：20Hz-20Khz
Water proof standard：IPX5

English
Matters need attention
III
2
The list of all paired phones will be wiped out when the Bluetooth audio amplifier is re-
powered on after powered off for two minutes.
Bluetooth pass word: 2288
Common trouble shooting
IV
Please ensure that user's phone/ipad is within the 10 m
effective communication range with the Bluetooth audio
amplifier
Please check if the Bluetooth is already connected by
another phone/ipad. If so, please disconnect the other
phone/ipad first and re-search the Bluetooth signal with
user's phone/ipad. If it is unable to find out whether the
Bluetooth audio amplifier is occupied by another
phone/ipad, please power off the Bluetooth amplifier for 2
minutes and then repower it on. Then search again with
user's phone/ipad.
Please check if the Bluetooth audio amplifier is
properly powered on
1.
2.
3.
Solution
Bluetooth signal can
not be found or
connection can
not be made
1.
2.
3.
1.
2.
3.
Music is stuttering
Please forget/ignore this Bluetooth name on user
phone/ipad and then search again for its Bluetooth signal
and make the connection.
Please check the music player's playing state on user's
phone/ipad.
If the user's phone/ipad is at the same time
connecting to other Bluetooth amplifiers, please
disconnect it from other Bluetooth amplifiers first
and then try to play music on this Bluetooth.
Please re-start user's phone/ipad.
Please make sure that user's phone/ipad is within the
10m effective communication range with the Bluetooth
audio amplifier.
If the music is played via internet, please make sure
that the internet is smooth and stable.
Please ignore/forget this Bluetooth name on user
phone/ipad and re-search the Bluetooth and make
connection.
4.
If the problems remain after above measures, please
contact the distributor or manufacturer for technical
assistance.
Bluetooth connection
is made but no sound
coming from the
speakers
Other
Trouble

＠