Joyusing CS16 User manual

SZ:143*210MM K
材质：封（面底）250G铜版纸
内页80G书纸
装订：骑马钉
Speakerphone
൐Ⴈඪૼ඀
User Manual

Installaon and self-inspecon of Speakerphone
3
Interface and display instrucons
Speakerphone self-inspecon
How to use Speakerphone
Geng to know your phone
2
2
2
2
Content
Speakerphone
Parts list
Oponal Accessories
Packing Contents
5
5
4
3
Standard Speakerphone Keypad
LED Status Indicator
Wireless Speakerphone Keypad
LED Status Indicator
Bluetooth Speakerphone
LED Status Indicator
6
7
8
9
10
11
Connecon Steps for USB 11
Installaon and use of oponal Hub 13
Installaon and Use of Oponal Extension Microphone 13
Technical Specificaons 14
One-year Limited Warranty 15
11
Connecng PC via Wireless(Wireless Speakerphone apply)
12
Bluetooth pairing(Bluetooth Speakerphone apply)
12
IN/OUT Connecon
Hub(Oponal) 4

2
Packing Contents
Speakerphone
User manual
4P4C Cable x 3pcs
USB Cable Wireless adapter
(Wireless Speakerphone apply)
Power adapter (Wireless\
Bluetooth Speakerphoneapply)
Parts list
Oponal Accessories
5m DIN6 Cable
Power adapter 4-Strand 3.5MM Cable
Extension Microphone
(up to 2pcs)
Hub
If any items are missing or damaged, contact your place of purchase immediately.
Do not use damaged products!

3
To ensure normal the use of a speakerphone, please do not install the speakerphone
at the following locaons:
Installaon steps:
If you need to talk over a USB cable, connect one end of the USB cable to the USB
port of the device and the other end to the USB port of the speakerphone.
Installaon and self-inspecon of Speakerphone
1.
Where there is high noise, the speakerphone may pick up the noise, and when you
talking, it will prevent the speakerphone to enter the receiving mode.
1.
The surface of the speakerphone will be scratched by vibraon.
2.
Do not place items within 60 cm of the speakerphone.
3.
Please use the power adapter provided by the product to avoid accidents.
4.
If you need a LINE IN/LINE OUT to call,please connect one end of the 3.5mm analog
audio LINE to the LINE IN/LINE out port of the video conferencing terminal and the
other end connect to the IN/OUT port of the speakerphone.
2.
When choosing to install two extension microphones, use the extension microphone
connector to connect the speakerphone EXT1, EXT2 port.
3.
When need longer cables and power supply, you need to purchase a Hub.When using
the Hub, please connect one end of the DIN6 cable to speakerphone, the other end
connected to the Hub DIN6 port, when you need to use the USB port, please connect
one end of the USB cable to the Hub, the other end connected to the PC, video
terminals. Then connect one end of the power adapter to the Hub DC12V IN port,
and put the other end into 100-240 AC power socket.Make sure the connecon is
correct,turn on the power, at this point, the speakerphone is enter standby mode.
4.
Speakerphone self-inspecon
Once the speakerphone is energizing again, it will start the automac detecon program.
At this me, the working status indicator will flash red, blue and green three mes in
sequence.

LED Status indicator
Line in/out port
USB port(power supply)
DIN6 Cable port
(connect to Hub)
4
5
4
3
2
1
1、DIN6 Cable port
2、USB port
3、 Power port
4、Turn on/off
5、 Status indicator
Interface and display instrucons
expansion microphone
port 2
Hub（oponal）
expansion microphone
port 1

Standard Speakerphone Keypad
5
Geng to know your phone
Volume buon
Speaker Mute
Answer/End calls
Mute Microphone
PC Mode
Mobile Mode
Eco cancellaon
Mode
Press the Volume down/up buon, The Status
LED shows the current volume
Short press turn on/off Speaker Mute buon
Press the Answer/End calls buon
Turn on/off Mute Microphone buon
Press the volume up buon and microphone
mute buon at the same me for 4 seconds to
enter PC mode and the working status light will
flash green three mes
Press the answer/end calls buon and
microphone mute buon at the same me for
4 seconds to enter/exit echo cancellaon mode,
enter the echo cancellaon mode the blue light
of the working status lamp will flash blue three
mes and exit flashes two mes
Press the volume down buon and microphone
mute buon at the same me for 4 seconds to
enter the mobile mode and the working status
light will flash green two mes
+
+
+

6
Microphone Status
indicator
Volume Status indicator
LED Status indicator
Red light on
Red light on
Green light on
Microphone mute status
Speaker mute status
Current Volume status
Microphone mute status
Blue light on USB connecon
Red light on
Green light on Exit Microphone mute status
Microphone Status indicator
Volume Status
indicator
LED Status Indicator
Speaker mute
indicator
Speaker mute indicator
LED Status indicator

Wireless Speakerphone Keypad
Volume buon Press the Volume down/up buon, The
Status LED shows the current volume
Speaker Mute Short press to turn on/off Speaker Mute, long
press 3 seconds to turn the power on/off
Answer/End calls Press the Answer/End calls buon
Mute Microphone Turn on/off Mute Microphone buon
PC MODE
Press the volume down buon and microphone
mute buon at the same me for 4 seconds to
enter the mobile mode and the working status
light will flash green two mes
Eco cancellaon
Mode
Press the volume up buon and microphone
mute buon at the same me for 4 seconds to
enter PC mode and the working status light will
flash green three mes
Press the answer/end calls buon and
microphone mute buon at the same me for 4
seconds to enter/exit echo cancellaon mode,
enter the echo cancellaon mode the blue light
of the working status lamp will flash blue three
mes and exit flashes two mes
Mobile Mode
+
7
/
+
+

8
Volume Status indicator
Red light on Speaker mute status
Green light on Current Volume status
Wireless Indicator
Green light off Wireless disconnecon
Baery indicator
Red light on Low baery
Green light flashing The baery is charging
Light off Full baery
LED Status Indicator
Microphone Status indicator
Wireless indicator
Baery indicator
Turn on/off indicator
Green light always on Wireless connecon
Speaker mute indicator
Speaker mute
indicator
Volume Status
indicator
LED Status indicator
Microphone Status
indicator
Red light on Microphone mute status
Green light on Exit Microphone mute
status
LED Status indicator
Blue light on USB connecon
Red light on Microphone mute status

Bluetooth Speakerphone Keypad
Volume buon Press the Volume down/up buon, The Status
LED shows the current volume
9
/
+
+
+
Bluetooth buon
Short press to Turn on/off Bluetooth, long
press 3 seconds to turn the power on/off
Answer/End calls Press the Answer/End calls buon
Mute Microphone Turn on/off Mute Microphone buon
PC Mode
Press the volume up buon and microphone
mute buon at the same me for 4 seconds to
enter PC mode and the working status light
will flash green three mes
Mobile Mode
Press the volume down buon and microphone
mute buon at the same me for 4 seconds to
enter the mobile mode and the working status
light will flash green two mes
Eco cancellaon
Mode
Press the answer/end calls buon and
microphone mute buon at the same me for 4
seconds to enter/exit echo cancellaon mode,
enter the echo cancellaon mode the blue light
of the working status lamp will flash blue three
mes and exit flashes two mes

Volume Status indicator Green light on Current Volume status
Bluetooth Indicator
Green light flashing Bluetooth pairing
Baery indicator
Red light on Low baery
Green light flashing The baery is charging
Light off Full baery
Microphone Status
indicator
Red light on Microphone mute status
Green light on Exit Microphone mute status
Green light always on Bluetooth connecon
10
LED Status Indicator
LED Status indicator
Blue light on USB connecon
Red light on Microphone mute status
Speaker mute indicator Red light on Speaker mute status
Microphone Status indicator
Bluetooth indicator
Baery indicator
Turn on/off indicator
Speaker mute
indicator
Volume Status
indicator
LED Status indicator

׈߅ࠏҠቔ
Turn on the power buon aer the connecon was confirmed correct.And wait for
the speakerphone self-check completed.
Common reference Sengs for PC and video devices with USB talking mode:
׈߅ࠏҠቔ
Connecng PC via Wireless（Wireless Speakerphoneapply）
Insert the wireless adapter to the USB port of the PC.
11
1.
2.
3.
How to use Speakerphone
Connecon Steps for USB
You can connect the power supply equipment with the original power adapter
(Wireless/BluetoothSpeakerphone equip) or connect one end of the USB cable to
the USB port of the PC and video conference system, and connect the other end to
the speakerphone.
You can connect the speakerphone and Hub(oponal) by using the original DIN6
data cable, connect one end of the USB cable to the USB port of the PC or video
conference system and connect the other end to the USB socket of the Hub(oponal),
and connect the power supply equipment with the original power adapter;
It will take a few seconds to install the driver automacally for the first setup.Turn
on the terminal . Third-party conference soware, and select the microphone and
speaker driver to start the audio and video conference with the device.
4.
It will take a few seconds to install the driver automacally for the first setup.Turn
on the terminal . Third-party conference soware, and select the microphone and
speaker driver to start the audio and video conference with the device.
4.
Baery charging instrucons: You can use DIN6 interface or USB interface of the
speakerphone to charge. When the DIN6 interface and USB interface are used at the
same me, the speakerphone is preferred to use DIN6 interface for charging. (Wireless/
BluetoothSpeakerphone is applicable)
1. Please adjust the volume of horns and microphones comprehensively to ensure the
communicaon is clear and smooth.
2. Don't turn on the speaker and microphone automac gain.
3. Give priority to turning off the audio processing funcons of the PC soware/video
soware (such as turning off automac gain, echo cancellaon, noise , reducon etc.)
4. Please use those speeches coding that has a higher sound quality as far as possible.
1.
Turn on the Wireless Speakerphone, aer 5 seconds, the Wireless Indicator will keep
on, and Wireless connecon is set up.
2.
3. Wireless voice calls can now be made.

12
׈߅ࠏҠቔ
Bluetooth pairing（Bluetooth Speakerphone apply）
Once paired with a Bluetooth device, you can use the speakerphone for audio call. To pair
your Bluetooth device with the speakerphone, follow steps below:
1.
Turn on the Bluetooth funcon of the mobile phone and click search.
2.
3.
4.
Press the buon to turn off Bluetooth.“ ”
5.
Note: when Bluetooth fails to match, Bluetooth needs to be restarted.
Use a 3.5mm 4-strand cable to connect your phone or PC device to the "I/O" port of the
speakerphone.
Note:Please set the phone LINE IN/OUT mode to “PC Mode”when the device is PC or
video devices. Or set the phone LINE IN/OUT mode to “Mobile Mode” while connecng
a smartphone.
Connect the microphone port and speaker port of Audio Transfer plug to the IN/OUT
port of the PC or video conferencing system with two 3.5mm 3-strand cable.
When the Bluetooth was set up,the Bluetooth indicator will keep lighng on.Then
you can use the speakerphone for audio call.
Press and hold the “ ” buon unl the Bluetooth Indicator flashes green light. The
speakerphone is under Bluetooth pairing mode.
Search with your Bluetooth device and connect.
If the device connecon port is a 3.5mm 3-strand port, you need a transfer adapter for
connecng.Insert audio transfer plug into the "I/O" port of Speakerphone.
׈߅ࠏҠቔ
In/Out Connecon

13
Please use the Hub when you need a longer connecon and power supply.
Installaon and use of oponal Hub
1. Connect the speakerphone and Hub oponal by using the original DIN6 data cable. ( )
and connect the power supply equipment with the original power adapter;
2.
3. Connect one end of the power adapter to the DC12V IN interface of the Hub, and
plug the other end into a 100-240v AC power port.
4. Turn on the power buon aer the connecon was confirmed correct.And wait for
the speakerphone self-check completed.
Note:
When using a hub, do not connect the USB cable to the USB port of the speakerphone,
avoid damaging the speakerphone.
Installaon and Use of Oponal Extension Microphone
Use an expansion microphone for important and large meengs.
1. Connect one end of a 2.5-meter long 4P4C dedicated wire to the socket of the
expansion microphone and the other end to the speakerphone EXT1.
2. Connect one end of a 2.5-meter long 4P4C dedicated wire to the socket of the
expansion microphone and the other end to the speakerphone EXT2.
3. Due to the host uses a high single point microphone.To achieve the best effect, the
speaker should be facing the microphone directly in front of the microphone. The
direcon of the microphone is the same as that of the nameplate.
4. The expansion microphone has mute switch and status indicator. The indicator is
green when it works normally, and red when mute.
Note:In order to properly use and protect the expansion microphone, it is necessary to
plug and unplug the expansion microphone connecon and install the expansion
microphone without power.
Microphone mute
Microphone
In the case of using the Hub,If you need to use the USB interface,you have to
connect one end of the USB cable to the USB port of the Hub, and connect the
other end to the USB port of the PC and video conference terminal.
When using a hub, you can charge through the hub power supply, do not connect the
speakerphone USB port for charging.

Technical Specificaons
14
Audio
parameters
Dimensions
Speakerphone
2 external microphones oponal for connecon makes the
ound-pickup radius up to 6 meters
180mm×180mm×42mm(L×W×H)
Hub(Oponal)
Model NO.
USB cable
113.6mm×113.6mm×32.6mm(L×W×H)
Interface DIN6 ×2, Power interface × 1, Power switch × 1
USB interface × 1
Model NO.
Voice
technical
parameters
Acousc Echo cancellaon(AEC)>65dB
Echo length cancellaon:≥500ms
Bidireconal noise compression(NC):<25dB
Automac Direcon finding Technology of Intelligent
microphone(EMI)
Automac gain control(AGC)
Microphone frequency response:100Hz-22KHz
Speaker frequency response:100Hz-22KHz
Speaker volume: 90dB at the most
Microphone sound-pickup radius: 4 meters, 360 degrees full
range
Expansion Mic
(oponal)
Power supply Power plug(DC12V)
Adapter input AC110V-AC220V,output DC12V/2A
Connecon
Cable
DIN6 data line × 1
Length: 5m
USB cable,length: 3 meters
Compability
Dimensions
Support Windows, Android, iOS and Linux
Drive-free automac recognion of cameras, microphones and
speakers
Compable with Zoom, Lynch, Vidyo, Skype for business and etc

15
One-year Limited Warranty