JRC FF60 User manual

JFC-600
Fish finder FF60
6.5” high visibility LCD screen
Dual frequency 50 & 200kHz
600W RMS transmitting power
Automatic mode selection
Multiple display modes & alarms available
– a new colour LCD sh nder from JRC clearly distinguishes the type of sh, realising a protable catch
since 1915

JFC-600 Fish nder
– performance features
JFC-600 Fish finder – the best catch for yo
Single frequency with
bottom discrimination
mode
Single frequency with
auto zoom mode
Dual frequency with
A-scope mode
Dual frequency
mixed mode
Navigation mode -
graphic display
Dual frequency mode
(night mode)
The JFC-600 sh nder continues the tradition
of high performance, operating in dual
frequency as standard, resulting in a highly
accurate and reliable read-out.
Unique features
The JFC-600 incorporates three sh nding alarms, a‘sh, shallow and deep’ alarm. In
addition, the sh nder integrates three water temperature and four navigation data alarms,
and a function to turn the alarm buzzer on or o. These alarms will contribute to safer
navigation and more ecient sh nding.
Alarms
JRC’s new sh nder incorporates a 6.5”high denition
colour LCD display. The innovative display modes (eleven
available) allow you to select and view eortlessly the
information you require. The operating status indicates gain,
noise suppression and interference. The numerical data, such
as speed, position, depth and temperature are conveniently
displayed and reappear in each display mode.
Display modes
The JFC-600 includes a “dual frequency mixed mode”,
enabling you to overlay 2 dierent frequencies, a unique
feature normally only available on high-end sh nders.
Generally the lower frequency is more suitable for bottom
discrimination, while the high frequency is more useful for
shallow water detection.
The unique “mix mode” of the JFC-600 enables you to see the
dierences of the two frequencies more clearly, giving you
better potential for a more protable catch.
Dual frequency mixed mode

JFC-600 Fish nder
– system exibility
Dimension drawings - Display
JFC-600
Weight 3,5 kg
200 mm
200 mm
ur catch
238 mm 135 mm
220 mm
Cursor operation
User and
display control
Power and dim
operation
cutout for panel mount
height 176 mm, width 192 mm, depth 220 mm
The JFC-600 also known as the FF60 integrates a highly reliable interfacing eld. The
transducer is the heart of the operation, receiving speed, depth and temperature
information, sending ultrasonic signals which determine seabed conditions and the
presence of life underwater.
You also have the opportunity to connect a (D)GPS sensor and the JFC-600 has as well an
NMEA 0183 input and output, enabling you to display navigation information.
Flexible interfacing
The compact design of JRC’s sh nder incorporates a new style of Man-Machine-Interface,
providing enhanced ergonomics and user-friendliness. The large LCD screen accompanied
by JRC’s customary menu structure ensures logical, accurate and convenient operation.
Easy operation
If situations arise where automatic scaling is essential, the JFC-600 easily adapts to the mode
selection, providing an optimised view. As you navigate to your next catch and you need
a certain waypoint (up to 400 possible), depth or area, the automatic mode selection will
simply adapt to the mode and displays what is required at that point.
Automatic mode selection

JFC-600 Fish nder
– specications
All specications are subject to change without notication.
Model JFC-600
Display
Model JFC-600
Display 6.5” colour LCD - 640x480dot
Presentation 8 colour gradation with 4 patterns
Brightness control 10 levels
Range auto or manual: 5 to 1500m, 10 to 5000ft, 3 to 600fm
Shift auto or manual: 0 to 1000m, 0 to 3000ft, 0 to 600fm
Frequency 200kHz/50kHz (dual frequency)
Power output 600W RMS (4800W P-P)
Gain (sensitivity) 100 steps
Depth unit meter, feet, fathom, SP (0.3000 to 1.9999m)
Speed unit knots, mile/h, km/h
Noise suppression level 0 to 7
Interference rejection o, IR1, IR2
STC short, mid, long
Water temperature 0º to 40ºC (32.0º to 100.0ºF)
Speed 0 to 70 knots
Trip log 0 to 999NM (only at STD/navigation type 1 or 2)
NMEA input APA, APB, BWC, BWR, GGA, HDG, HDT, MTW, RMC, VTG, VHW
NMEA output SDDBT, SDDPT, SDMTW, SDAPB, SDBWC, GPGGA, GPRMC
Alarm shing sh, shallow, deep
Alarm temperature upper, lower, rate
Alarm navigation arrival, anchor, o course, DGPS
Waypoints up to 400 (10 plans, 40 waypoint per route)
Input voltage DC 12-24V
Power consumption 25W (approx)
Water resistance IPX5
Ambient conditions -15ºC to +55ºC
Optional items
Triducer 200/50kHz dual freq - transom CFT-2501TFA
Triducer 200/50kHz dual freq - thru hull CFT-2501HFB
Transducer 200/50kHz dual freq - thru hull CFT-2501HCA
Transducer 1kW, 200/50kHz CFT-2511
Control connector (GPS/NMEA) 3-282-8SG-3DC (CONXALL)
12 channel GPS receiver (with SBAS) JLR-4340
Power cable (extra/spare) CFQ-5484
Copyright © 2007 JRC Amsterdam branch -07.12/21/1
JRC Amsterdam branch
Cessnalaan 40-42
1119NL Schiphol-Rijk, The Netherlands
Telephone:
Fax:
E-mail:
Web:
[phone]
[phone]
[email protected]
www.jreurope.com
For further information please contact:
What’s standard in the box?
1. Fish nder
2. Spare parts
3. Power cable (length 1.5 m)
4. Sun cover
5. Manual (English)
JRC one-call™
One number to call
With JRC you can go anywhere and
if you need our support, simply call us
at [phone], anytime.