JRC GPS 124 - User manual

GPS RECEIVER
GPS 124


●
Capable of SBAS (WAAS/EGNOS/MSAS) correction

●RAIM function is available
●12-Channel Parallel for simultaneous
reception of 12 satellites.
●IEC61162-1, NMEA0183 Output

For further information, contact:
Since 1915
PrintedinJapan2006.10 2006.10 CAT.No.Y3-141（No.491-1-3）A
Main Office: Nittochi Nishi-Shinjuku bldg.
10-1, Nishi-Shinjuku 6-chome
Shinjuku-ku, Tokyo 160-8328, Japan
Telephone: [phone]
Facsimile: [phone]
Overseas Branches : Seattle, Amsterdam, Athens
Liaison Offices : Taipei, Manila, Jakarta, Singapore,
Hanoi, New York
24EM
ISO9001
，
ISO14001 Certified
URL
■COMPONENTS
■SYSTEM CONFIGURATION
■OUTLINE DRAWING
Name
GPS Receiver
Instruction manual
No.
1
2
Type
JLR-4340
Remarks
includes 10m cable
Q'ty
1
1
●Option :15m Extension Cable CFQ-8773
●Specifications subject to change without notice.
Caution
Before attempting to operate this unit, read the instruction
manual thoroughly to correctly and safely operate the unit.
■FEATURES
Internal SBAS receiver
The GPS124 includes a SBAS (WAAS/EGNOS/MSAS) receiver.
By using SBAS you can achieve precise position.
RAIM function
The accuracy of position fixes is self-tested by the GPS124. (RAIM
function)
This function assures higher reliability to the position fix than
conventional method.
12-Channel Parallel for Receiving 12 Satellites Simultaneously
The GPS 124 is designed to simultaneously receive signals from 12
orbiting satellites, ensuring the most accurate positioning.
IEC61162-1, NMEA0183 Output
Since the output data is changeable between IEC61162-1 (NMEA0183
version 2.3), NMEA version 1.5 and 2.1, you can connect the GPS124 to
various Marine Electronics Equipment such as Marine Radars, Fishfinders,
Plotters, or others.
■SPECIFICATIONS
GPS Specifications
Receiver type: Multichannel (12-CH, SBAS 1-CH) all-in-view
Frequency: 1575.42MHz ±1MHz (C/A code)
Sensitivity: - 135dBm for acquisition, - 138dBm for tracking
Accuracy: 30m 2DRMS (C/A code, HDOP≦4, SA OFF)
7m 2DRMS when SBAS corrected
Time to first fix: Typically 40 seconds (cold start fix)
Typically 33 seconds (warm start fix)
Position update: Normally every 1 second
General
DGPS input: RTCM SC-104 ver. 2.0 type 1, 2, 7, 9 available
Data output: Signal output port, TTL level
IEC61162-1 (NMEA0183 ver. 2.3), NMEA
0183 ver. 1.5 or 2.1 selectable
IEC61162-1
(ver2.3) GGA, RMC, VTG, ZDA, DTM, GBS,
GNS
ver1.5 GGA, RMC, GLL, VTG
ver2.1 GGA, RMC, GLL, VTG, DTM
Geodetic datum: 46 (WGS-84, WGS-72, Japan, America,
Canada / Alaska, Europe, Australia,
England, NAD-83, other 37 selectable)
Input voltage: 12/24 VDC +30%, - 10% (less than 1.5W)
(Power Consumption)
Data cable: 10m
Operating temperature : - 25˚C to 70˚C
Water proof: USCG CFR-46/IEC60945 MOUNTING SCREW :
1INCH 14 UNS-2B
BASE
CABLE
MASS:lessthan0.7kg
CONNECTOR
CABLE LENGTH : 10m
RECEIVER
ø108mm
ø33.5mm
108mm
JLR-4340
6-pin connector
（Option）
JRC Radar
JRC Fish Finder
JRC Plotter
JRC GPS Display
GPS 124
GPS RECEIVER
(JLR-4340)