JRC NCR-333 - Parts list manual

The following figure is message list 1 screen. Other screens display the same marks.
Message text screen : After equipment starts, the following screen appears.
Explanation of keys
MENU key
Displays the “Main Menu”.
USER key
Displays the screen assigned to this key.
DISP key
Changes the display screen.
Up, Down, Left, Right key
Moves the cursor, scrolls the display screen, and selects the item.
CLR key
Clears input errors and cancel operations.
Turns off the buzzer sound.
ENT key
Determines selection of an item and decides a setup.
＊
key
Displays the small window (the sub screen).
DIM key
Adjusts the back light brightness of the LCD.
PWR/CONT key
Turns the power ON. Adjusts the contrast of the LCD when power is ON.
GPS position data
External GPS position data is inputted.
If E,M,N, or S is displayed next to “ “, it indicates that
the external GPS position information is invalid.
N
N
C
C
R
R
-
-
3
3
3
3
3
3
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
C
C
a
a
r
r
d
d
－ iv －
－ i －
MENU
USER
DISP
PWR
CONT
DIM
CLR
ENT
*
Unread message
Unread message is stored.
Alarm message
When an alarm message (MSG TYP: A,B,L)
is received, it is
displayed with the buzzer sounds.
NAVTEX Alarm
NAVTEX alarm was detected.
Unread message
At least one unread message exists.
Receiving message
The channel while receiving a message is indicated
: 518kHz : 490kHz : 4209.5kHz
SAR message
When a search and rescue (SAR)
message is received, it is
displayed with the buzzer sounds.
Save message
This message is saved.
Check mark
The check marks are putt
ed when saving
(printing or outputting)
each message at the
same time.
Display title
The title of screen that is currently open is displayed.
SORT
Displays the sorting order of the message list.
/Station selection mode
: Indicates t
he selection method of a coast station is
the "auto mode."
: Indicates t
he selection method of a coast station is
the "manual mode."
ⅤⅢ NAVAREA No.
The NAVAREA number is displa
yed when
position data is inputted.
MSG LIST SORT:MSG TYPE ⅤⅢ
ID FREQ LINES DATE TIME
IA01 4209.5 15 04/06/09 12:34
STATION : YOKOHAMA
MSG TYPE: NAVIGATIONAL WARNINGS
KA04 518 10 04/06/09 10:34
STATION : KUSIRO
MSG TYPE: NAVIGATIONAL WARNINGS
IA07 490 20 04/06/09 09:34
STATION : YOKOHAMA
MSG TYPE: NAVIGATIONAL WARNINGS
KC10 490 12 04/06/09 05:34
STATION : KUSIRO
MSG TYPE: ICE REPORTS
KH13 518 5 04/06/09 05:34
STATION : KUSIRO
MSG TYPE: LORAN MESSAGE
KP16 518 9 04/06/09 01:34
STATION : KUSIRO
DATA:321/342
/Arrow mark
‘▲’ ‘▼’mark is displayed on the top/ bottom line
when the display screen is able to scroll upward
/downward.
Status bar
Displays alarm, received message
type and other status
7ZPJD0306B
MENU
USER
DISP
PWR
CONT
DIM
ENT
CLR
*

CLR
MENU
MENU
DISP
MENU
－
ii
－
－
iii
－
Save the message:
50 messages can be saved in each channel. In addition, the message that is not saved (the stored message) is
automatically erased from the data memory about 70 hours after receiving.
1) Save the message in the message text screen
The display of each screen:
To display each screen, press each key as follows. Moreover, in the following case, BAM ALERT/ NAVTEX ALARM and Message
text screen are displayed automatically.
Message text screen
Message list 1 screen
Message list 2 screen
Select message list screen
POS/TIME screen
- After starting this equipment
- After receiving the message
DISP
DISP
DISP
DISP
DISP
BAM setting: OFF
- When NAVTEX ALARM has occurred
When BAM ALERT/ NAVTEX ALARM
has occurred
MAIN MENU
BAM ALERT screen
( Select ‘SAVE MSG’
）
*
Display the text screen
of the message to save.
ENT
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT
*SAVE MSG*
ARE YOU SURE?
[OK] [CANCEL]
(Select ‘OK’ )
ENT
Saving a message
is started.
2) Save the message in the message list screen
(Select ‘SAVE MENU’)
*
Move cursor onto the
message to save.
ENT
*SAVE MSG*
ARE YOU SURE?
[OK] [CANCEL]
(Select ‘OK’ )
ENT
* SET UP *
LIST
[CHECK]
SAVE MENU
UNSAVE MENU
PRINT MENU
*SAVE MENU*
[SELECT MSG]
[CHECK MENU]
[RESET CHECK]
[CANCEL]
ENT
Unsave the message:
The saved messages can be unsaved from the message list screen. In addition, when the message stored
for 70 hours is deleted, the message is deleted also from the message list.
*UNSAVE MENU*
ARE YOU SURE?
[OK] [CANCEL]
Unsaving a message is started.
(Select ‘UNSAVE MENU’)
*
Move cursor onto the
message to unsave.
ENT
(Select ‘OK’ )
ENT
* SET UP *
LIST
[CHECK]
SAVE MENU
UNSAVE MENU
PRINT MENU
*UNSAVE MENU*
[SELECT MSG]
[CHECK MENU]
[RESET CHECK]
[CANCEL]
ENT
or
Receiving station (Message type) selection:
Select the receiving station and the message type of each channel. To Select the receiving station, select
“1.RX STATION” from MAIN MENU screen.
To select the Message type, select "2.MESSAGE TYPE" in MAIN MENU screen.
STATION(MANUAL)
FREQUENCY
:RX1(518K)
SELECT ALL
A:JAYAPURA N
B:AMBON O
C:SINGAPORE P
D:MAKASSAR Q
E:JAKARTA R
The example below shows the procedures to select receiving stations in the “MANUAL MODE
SETTING”.
STATION(MANUAL)
FREQUENCY:RX1(518K)
SELECT ALL
A:JAYAPURA N
B:AMBON O
C:SINGAPORE P
D:MAKASSAR Q
E:JAKARTA R
STATION(MANUAL)
FREQUENCY:RX1(518K)
SELECT ALL
A:JAYAPURA N
B:AMBON O
C:SINGAPORE P
D:MAKASSAR Q
E:JAKARTA R
*STNS(MANUAL) SET*
SAVE CHANGES TO
THIS SETTING?
[CLEAR]
[ALL CLEAR]
[OK] [CANCEL]
STATION(MANUAL)
FREQUENCY
:RX1(518K)
SELECT ALL
A:JAYAPURA N
B:AMBON O
C:SINGAPORE P
D:MAKASSAR Q
E:JAKARTA R
ENT
ENT
ENT
*
ENT
Saving settings are started.
4. MANUAL MODE SETTING
ENT
NAVTEX ALARM screen
BAM setting: ON
- When BAM ALERT has occurred
(Select ‘SELECT MSG’)
(Select ‘SELECT MSG’)