JS Automation AIO-3310 User manual

AIO-3310/1/2
ANALOG INPUT AND
MULTI-FUNCTION DIGITAL I/O CARD
USER'S MANUAL (V1.0)
健昇科技股份有限公司
JS AUTOMATION CORP.
台北縣汐止市㆗興路 100 號6樓
6F,NO.100,CHUNG-SHIN RD.
SHI-TSU,TAIPEI,TAIWAN,R.O.C.
TEL
：886-2-2647-6936
FAX
：886-2-2647-6940
http://www.automation.com.tw
E-mail：[e-mail]
[e-mail]
Export: [e-mail]

1
Contents
1. FORWARD ...................................................................................................................................2
2. PACKING LIST...........................................................................................................................2
3. FEATURES...................................................................................................................................3
3.1 MAIN CARD.........................................................................................................................3
3.2. DIN RAIL MOUNTED WIRING BOARD...........................................................................3
4. SPECIFICATIONS......................................................................................................................4
4.1. AIO-3310 MAIN CARD........................................................................................................4
4.2. AIO-3310 WIRING BOARD.................................................................................................4
5. LAYOUT AND DIMENSIONS...................................................................................................5
5.1. AIO3310/1/2 MAIN CARD LAYOUT..................................................................................5
6. PIN DEFINITIONS......................................................................................................................6
6.1. PIN DEFINITIONS FOR ON CARD 37P CONNECTOR ...................................................6
6.2. PIN DEFINITIONS FOR EXTENSION 37P CONNECTOR...............................................7
7. HARDWARE DESCRIPTIONS.................................................................................................8
7.1. CARD ID SETTING..............................................................................................................8
7.2. DIGITAL I/O..........................................................................................................................8
7.3. TIMER/COUNTER
................................................................................................................8
7.4. ANALOG INPUT
...................................................................................................................8
8. APPLICATIONS..........................................................................................................................9
9. ORDER INFORMATION.........................................................................................................10

2
1. FORWARD
Thank you for your selection of our PCI bus AIO-3310/1/2 a multi-channel analog input, and
multi-function digital i/o and timer/counter card.
An analog input card maybe as simply as just signal conversion, and the calibration job will be
the burden of the users. AIO-3310 provides a new approach that each channel has been calibrated
with our precision instruments and all the records kept in the on-card eeprom to give the users a
transparent environment of accurate result at low card price.
Except for the calibration features, 2 byte-wide programmable TTL i/o ports also give users more
flexible functions to integrate the whole system.
Two 32bit Timer/counter ports also provide you versatile functions such as: programmable
one-shot, rate generator, square wave generator, software/hardware triggered strobe, event
timer/counter, triggered timer/counter, PWM generator, ….
Wish you would enjoy this card!
Other analog i/o
card:
AIO-9201 ISA bus, 8 differential /16 single end 12bit analog input, 2 12bit analog output card
AIO-3310 PCI bus, 8 single/differential 12 bit analog input, 16 TTL i/o card
AIO-3311 PCI bus, 16 single/differential 12 bit analog input, 16 TTL i/o card
AIO-3312 PCI bus, 24 single/differential 12 bit analog input, 16 TTL i/o card
Any comment is welcome,
please visit our website:
www.automation.com.tw
for the up to date information.
2. PACKING LIST
2.1 AIO-3310 MAIN CARD 1
2.2 MANUAL CD 1
2.3 DIN RAIL MOUNTED WIRING BOARD 1
(1 wiring board for AIO-3310, and 2 wiring boards for AIO-3311,3312)
2.4 D-TYPE 37 PIN CABLE(1.5m) 1
(1 cable for AIO-3310, and 2 cables for AIO-3311,3312)
2.5 Extension kit 1
(for AIO-3311,3312 only)

3
3. FEATURES
3.1 MAIN CARD
General:
3.1.1 PCI plug and play function
with card ID for 16 identical cards
3.1.2 Security password blocks illegal copy of software
Analog function:
3.1.3. 8/16/24 channel 12bit analog inputs (standard:8 channels)
3.1.4. Software selectable input range:
-10V~ +10V, -5V~ +5V , 0~10V, 0~5V
3.1.5. Factory pre-calibrated analog conversion accuracy
Digital I/O function:
3.1.6. 2 byte-wide programmable TTL i/o
3.1.7. IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of timer/counter
function
Timer/Counter function:
3.1.8. 2 32bit multifunction counters up to 33MHz
3.1.9. multi-function:
- programmable one-shot
- square wave generator
- event counter
- PWM generator
3.2. DIN RAIL MOUNTED WIRING BOARD
3.2.1. 37 pin D-type connector to wiring terminals

4
4. SPECIFICATIONS
4.1. AIO-3310 MAIN CARD
General:
4.1.1. PCI data width ―32 Bits
4.1.2. Card ID
―4 bits
4.1.3. Security password
―10 bytes, user configurable
4.1.4. Interrupt
―software disable/enable
4.1.5. Dimension
―150(W)*106(H)mm
Analog block:
4.1.6. input channels
―8/16/24 channel single end or differential
(standard:8channels)
4.1.7. resolution
―12bit
4.1.8. input range
―-10V~ +10V, -5V~ +5V , 0~10V, 0~5V
4.1.9. range selection
―software selectable per chip
4.1.10. conversion speed
―6us per chip (8 channel per chip)
4.1.11. accuracy
―full range within 5mV (after calibration)
Digital I/O block:
4.1.12. i/o channels
―16 TTL (port0,port1)
4.1.13. configuration
―byte input /output
Timer/Counter block:
4.1.14. channels
―2
4.1.15. data length
―32 bit
4.1.16. specific input
―trigger in/ counter in via digital i/o port0
4.1.17. specific output
―trigger out / counter out via digital i/o port 1
4.1.18. time base
―PCI system clock (33/66Mh)
4.1.19. functions
―
- programmable one-shot
- square wave generator
- event counter
- PWM generator
4.2. AIO-3310 WIRING BOARD
4.2.1. Connection cable
―D-type 37P cable to connect main and wiring board
4.2.2. Dimension
―113(W)*85(H)mm

5
5. LAYOUT AND DIMENSIONS
5.1. AIO3310/1/2 MAIN CARD LAYOUT
Card ID

6
6. PIN DEFINITIONS
6.1. PIN DEFINITIONS FOR ON CARD 37P CONNECTOR
PIN
DESCRIPTIONS
PIN
DESCRIPTIONS
1 IO00: dio port0 bit0
trigger in of counter0 20 IO01: dio port0 bit1 trigger in of counter1
2 IO02: dio port0 bit2 21 IO03: dio port0 bit3
3 IO04: dio port0 bit4 22 IO05: dio port0 bit5
4 IO06: dio port0 bit6 23 IO07: dio port0 bit7
5 IO10: dio port1 bit0
trigger out of
counter0/timer0
24 IO11: dio port1 bit1
trigger out of
counter1/timer1
6 IO12: dio port1 bit2 25 IO13: dio port1 bit3
7 IO14: dio port1 bit4 26 IO15: dio port1 bit5
8 IO16: dio port1 bit6 27 IO17: dio port1 bit7
9 AI0+: analog in0+ 28 AI0-: analog in0-
10 AI1+: analog in1+ 29 AI1-: analog in1-
11 AI2+: analog in2+ 30 AI2-: analog in2-
12 AI3+: analog in3+ 31 AI3-: analog in3-
13 AI4+: analog in4+ 32 AI4-: analog in4-
14 AI5+: analog in5+ 33 AI5-: analog in5-
15 AI6+: analog in6+ 34 AI6-: analog in6-
16 AI7+: analog in7+ 35 AI7-: analog in7-
17 +5V (out) 36 GND
18 GND 37 -15V (out)
19 +15V (out)
Note:AI0~AI7 is on chip 1.
AI0+
AI1+
AI2+
AI3+
AI4+
AI5+
AI6+
AI7+
AI0-
AI1-
AI2-
AI3-
AI4-
AI5-
AI6-
AI7-
DIO00 DIO01
DIO02 DIO03
DIO04 DIO05
DIO06 DIO07
DIO10 DIO11
DIO12 DIO13
DIO14 DIO15
DIO16 DIO17
+5V
GND GND
-15Ve
+15Ve
120
221
322
423
524
625
726
827
928
10 29
11 30
12 31
13 32
14 33
15 34
16 35
17 36
18 37
19

7
6.2. PIN DEFINITIONS FOR EXTENSION 37P CONNECTOR
PIN
DESCRIPTIONS
PIN
DESCRIPTIONS
1 AI8+: analog in8+ 20 AI8-: analog in8-
2 AI9+: analog in9+ 21 AI9-: analog in9-
3 AI10+: analog in10+ 22 AI10-: analog in10-
4 AI11+: analog in11+ 23 AI11-: analog in11-
5 AI12+: analog in12+ 24 AI12-: analog in12-
6 AI13+: analog in13+ 25 AI13-: analog in13-
7 AI14+: analog in14+ 26 AI14-: analog in14-
8 AI15+: analog in15+ 27 AI15-: analog in15-
9 AI16+: analog in16+ 28 AI16-: analog in16-
10 AI17+: analog in17+ 29 AI17-: analog in17-
11 AI18+: analog in18+ 30 AI18-: analog in18-
12 AI19+: analog in19+ 31 AI19-: analog in19-
13 AI20+: analog in20+ 32 AI20-: analog in20-
14 AI21+: analog in21+ 33 AI21-: analog in21-
15 AI22+: analog in22+ 34 AI22-: analog in22-
16 AI23+: analog in23+ 35 AI23-: analog in23-
17 +5V (out) 36 GND
18 GND 37 -15V (out)
19 +15V (out)
AI8+
AI9+
AI10+
AI11+
AI12+
AI13+
AI14+
AI15+
AI16+
AI17+
AI18+
AI19+
AI20+
AI21+
AI22+
AI23+
+5V
GND
+15Ve
AI8-
GND
-15Ve
AI9-
AI10-
AI11-
AI12-
AI13-
AI14-
AI15-
AI16-
AI17-
AI18-
AI19-
AI20-
AI21-
AI22-
AI23-
120
221
322
423
524
625
726
827
928
10 29
11 30
12 31
13 32
14 33
15 34
16 35
17 36
18 37
19
DB37PF

8
7. HARDWARE DESCRIPTIONS
7.1. CARD ID SETTING
Since PCI cards have plug and play function, the card ID is required for programmer
to identify which card he/she will control without knowing the physical address
assigned by the Windows (OS). A 16 position rotary switch for extinguishing the 16
identical card.
7.2. DIGITAL I/O
The 2 byte programmable TTL I/O can be used as input or output depend on your
configuration. But when you use the timer / counter trigger output mode the port1 is must
configure as output and bit0 is timer0/counter0 trigger out, bit1 is timer1/counter1 trigger
out.
If you use trigger input mode of counter the port0 must configure as input port and bit0
as counter0 input ,bit1 as counter1 input.
7.3. TIMER/COUNTER
There 2 timer/counter’s on board. Each one has 32 bit register length, if you program as
PWM mode, the register is divided as 2 16 bit width, the upper 16 bit work as the pulse
high width and the lower 16 bit work as PWM frequency register . The card also provide
end of count interrupt function of both the timer/counters.
7.4. ANALOG INPUT
There are maximum 24 channels of analog input on card, which are divided in 3 A/D
chips. Depends on your selection, 8/16/24 channels are available. The hardware may
accept 0-5V, 0-10V,-5V-+5V, -10V - +10V range on per chip basis.

9
8. APPLICATIONS
8.1. Analog section:
For measurement of analog signal such as:
- temperature
- voltage
- current
- flow
- light
- ....
Note: The analog signal should be pre-processed to the acceptable range of the card.
8.2. Digital section:
For the control of digital i/o:
- switch input
- relay control
- trigger output
- ...
Note: The digital signal should be pre-processed to the TTL level
.
8.3. Counter/Timer section
- event counting
- periodic interrupt source
- PWM generator (can work as D/A with external low pass filter)
- counter/timer with trigger out
- duration counter

10
9. ORDER INFORMATION
PRODUCT DESCRIPTIONS
AIO-3310 8 channels analog input ,16 TTL i/o and multi function timer/counter card
AIO-3311 16 channels analog input ,16 TTL i/o and multi function timer/counter card
AIO-3312 24 channels analog input ,16 TTL i/o and multi function timer/counter card
M270337X0 D-type 37 pin 1.5M cable
JD50026 D-type 37P DIN rail wiring board
SM23403 Extension kit (for 3311/3312 only)