JT SS125 User manual

SS125
LOUD SPEAKER&SPOTLIGHT
——Manual V1.1(2022.8)

1
CATALOG
1. Disclaimer and Warning......................................2
2. SS125 Part description.......................................3
3. SS125 Installation...............................................4
4. DJI Pilot APP Operation......................................5
5. Micro USB instructions .....................................13
6. Lining mounting instructions.............................15
7. SPEC................................................................16

2
1.Disclaimer and Warning
The content mentioned in this article is related to your safety, legal rights
and responsibilities. Before using this product, please read the text carefully to
ensure that the product has been correctly set. Failure to follow and operate in
accordance with the text may cause harm to you and the people around you,
and damage the product or other surrounding objects. Please visit website of
www.JLIdrone.com for the latest product information.
Warning
SS125 is precision equipment. In case of hardware defects, please
contact after-sales service and return to the factory. Do not to disassemble
and repair it yourself, or you will lose the warranty and repair qualification.
Caution
1. The use of the pager function in close proximity or indoors may cause harm
to human ears! Please use with caution!
2. The illumination of the light outlet is very high, do not look directly at the
light outlet!
3. Do not use the searchlight on the ground or when the drone rotor is
prohibited to prevent the searchlight from triggering overheating protection!
4. If the PSDK menu is incomplete, exit the DJIAPP in the background and
re-enter.

3
2. SS125 Part description
1. Spotlight
5. M3 Cup head screw
2. loud speaker
6. Quick release bracket
3. micro USB port
7. Speaker servo
4. Power supply & communication
cable

4
3.SS125 Installation
3.1 Install the quick release bracket on the DJI M30. Use H2.0 hexagon
screwdriver and M3 ×10 screws, install the quick release bracket on the
M30 aircraft.
3.2 Slide the SS125 onto the quick release rack rail to the end of the rail,
and shake the bottom of the SS125 to ensure it is installed in place. To ensure
clear ground voice during flight, please adjust the speaker to a certain angle
with the aircraft. (See the figure below)

5
3.3 Connect the power & communication cable of SS125 to the PSDK
connection socket on the M30 interface.
4.DJI Pilot APP Operation
4.1 Click DJI Pilot to enter the main interface. The words SS125 PSDK will
be displayed on the right side of the screen, indicating that the load
identification is successful, and the next operation can be carried out. Click to
enter the flight interface.

6
4.2 Enter the flight interface and click the "PSDK" button at the lower right
corner of the screen to display the load function control.
1. Volume control
5. Status information list
2. Light on-off & control
6. Real time broadcast
3. Strobe function
7. TTS function
4. Switch of searchlight synchronous
with main camera
8. Audio file player

7
4.3 Click the status information list to see the audio file track list on the
upper left.
4.4 Click the searchlight button, slide the slider to turn on the searchlight and
adjust the brightness.

8
4.5 Click the volume button to control the volume.
4.6 Click the real-time broadcast button to the function

9
4.7 Click the Speak button to speak, and click to play after speaking.
4.8 Click the TTS button to enter the text to speech function

10
4.9 Enter the content in the text box, and then click Broadcast to play.
4.10 Click the menu option in the upper right corner of the screen to enter
the menu bar.

11
4.11 Click the PSDK button to switch the language, speed and intonation.
4.12 Audio track can be played, paused and switched. The arrow points to
the current playing track.

12
4.13 The searchlight angle can be adjusted up and down.
4.14 Click the SS125 version number button three times to view the product
SN in the upper left corner.

13
5.Micro USB instructions
5.1 Audio file copy
5.1.1 Use the micro USB data cable to connect the SS125 port to the
computer USB port.
5.1.2 After the connection, the computer will display a new USB flash disk
for reserve equipment.
5.1.3 Double click the USB flash drive to enter the interface, and copy the
audio file to the music folder.
5.1.4 After the audio file was copied successfully, the USB flash disk can be
safely exited.

14
5.1.5 The audio files successfully copied can be viewed through the track
directory.
5.2 Firmware updating
5.2.1 Copy the upgraded firmware to the firmware folder.
5.2.2 Firmware copy is successful, exit the USB flash disk safely.
5.2.3 Connect the power supply communication cable of SS125 to the SDK
socket on the longitude latitude M30. Start the drone, and the firmware will be
upgraded automatically.
5.2.4 Firmware upgrade takes about 1 minute. After the upgrade, you need
to shut down the aircraft and restart it again to view the upgraded version
number.

15
6.Lining mounting instructions
6.1 Put the loudspeaker lining mouth upward into the DJI M30 safety box.
6.2 Then put the pager into the lining.

16
7.SPEC
Technical Parameters
Model
SS125
Interface
DJI PSDK
Weight
274g（with bracket）268g（without bracket）
Dimensions
104*124*76mm
Light Power
40W
Speaker Power
20W
Power voltage
13.6V~24V
Luminous flux
2LUX@100m
Lighting FOV
15°
Lighting distance
120m
Spot diameter
56m
Lighting area
986 ㎡
Mechanical Range
Pitch -120°~+45°
Max Sound
pressure
120dB
Speaker Function
Real-time broadcast
Recording playback
Audio file playback
TTS
Audio format
Wav, mp3
Support APP
DJI Pilot /DJI Pilot 2
Operating TEMP
-20℃~+50℃
Supported drones
M30 series