JUGS Sports JUGS BP2 User manual

OWNER'S MANUAL
Operating Instructions
for the JUGS®BP®2
Cricket Bowling Machine
SAVE THIS MANUAL

ATTENTION: Coaches and operators of this cricket machine.
This manual must be kept with the cricket machine at all times.
Each coach and/or operator must read and understand this manual
before using the JUGS BP®2 Cricket Bowling Machine.
Call 1-800-547-6843 or 503-692-1635 for additional copies
of this manual if necessary.

1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Safety Signs and Labels . . . . . . . . . . . 3
Rules for Safe Operation. . . . . . . . . . . . . . . . 5–7
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . 8–9
Terminology . . . . . . . . . . . . . . . . . . . . . . . .10
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . .11
Set Up . . . . . . . . . . . . . . . . . . . . . . . . . 11–12
Transporting . . . . . . . . . . . . . . . . . . . . . . . .12
Operation . . . . . . . . . . . . . . . . . . . . . . . 14–23
Bowling to Batters. . . . . . . . . . . . . . 15–16
Bowling Different Deliveries . . . . . . . . . .18
• Fast/Medium Pace . . . . . . . . . . . . . . . .19
• Leg Break/Advanced InSwing. . . . . . . . . .20
• InSwing/OutSwing . . . . . . . . . . . . . . . .21
• Off Break/Advanced OutSwing . . . . . . . . . 22
BP®2 Product Specifications . . . . . . . . . . . . . .24
Maintenance . . . . . . . . . . . . . . . . . . . . . . . .25
Operator Notes . . . . . . . . . . . . . . . . . . . . . . 26
Warranty Information . . . . . . . . . . . . . . . . . . 27
Table of Contents

2
Introduction
Your new JUGS BP®2 Cricket Bowling Machine has been checked for quality
and craftsmanship. Its innovative design is backed by four decades of research,
development and manufacturing experience. It has many features designed to
make your practices more efficient and enjoyable. Safety, performance and
dependability have been given top priority in the design of all JUGS machines,
making them easy to operate and maintain. With proper care, your JUGS
cricket machine will give you many years of enjoyable service.
At JUGS Sports, we are committed to providing our customers with safe,
dependable products. Your comments are always welcome and they help us
to continue to be the #1 producer of ball-throwing machines in the world.
Please call 1-800-547-6843, email to [email protected], or write to JUGS
with your comments.

▲
▲
▲
Product Safety Signs and Labels:
The purpose of product safety signs and labels is to attract your attention to
possible dangers. The safety symbols, signal words and the explanations with
them, deserve your careful attention and understanding. The safety warnings
do not by themselves eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention measures.
!DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal
word is to be limited to the most extreme situations.
!WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices.
Safety Alert Symbols
Safety Alert Symbols indicate danger, warning or caution. These symbols may
be used in conjunction with other symbols or pictographs. Failure to obey a
safety warning will result in serious injury to yourself or to others. Always
follow the safety precautions to reduce the risk of electric shock and personal
injury.
Product Safety Signs & Labels
3

Figure 1
4
Carefully read all safety sign decals affixed to machine before operating your
JUGS cricket machine. See examples below.
Safety Signs and Labels
▲
!DANGER
-MECHANICAL HAZARD- READ ALL OPERATING
AND SAFETY INSTRUCTIONS BEFORE USING THIS MACHINE.
ONLY INSTRUCTED PERSONNEL SHALL OPERATE THIS
MACHINE.
CJC-1
▲
!DANGER
-IMPACT HAZARD- MAKE SURE PATH OF BALL IS CLEAR
TO THE BATTER BEFORE FEEDING THE BALL.
CJC-4
▲
!DANGER
-SHOCK HAZARD- ALWAYS UNPLUG MACHINE
BEFORE CHANGING FUSES.
CJC-5a
▲
!DANGER
-SHOCK HAZARD- THIS MACHINE SHALL BE USED
AND STORED IN DRY LOCATIONS ONLY.
CJC-2
▲
▲
!WARNING
-PINCH POINT HAZARD- DO NOT PLACE HANDS OR
OTHER BODY PARTS INTO AREA NEAR MOVING TIRE(S).
CJC-3
!WARNING
-MECHANICAL HAZARD- ALL TIRE LUG BOLTS MUST BE
CHECKED FOR TIGHTNESS BEFORE EACH USE.
CJC-9

▲
▲
▲
! WARNING: JUGS cricket machines are intended for use by operators
who are at least 18 years of age and who have been
instructed in their use.
! WARNING: Do not attempt to operate this machine until you have read
thoroughly and understand completely all instructions,
safety rules, machine labels, etc., contained in this manual.
Failure to comply can result in accidents involving electric
shock or serious personal injury. Save this Owners Manual
and review frequently for continuing safe operation, and
for instructing others who may use this machine.
! WARNING: Do not connect your cricket machine to a power source
until you have assembled and adjusted the machine as
described in this manual and have read and understood all
precautions and operating instructions in the manual and
printed on the machine.
Rules For Safe Operation
Read this Manual
• Know Your Cricket Machine. Read the Owner's Manual carefully. Learn the
machine's capabilities, features and limitations as well as the specific
potential hazards related to this machine.
• Guard against electrical shock by preventing body contact with
grounded surfaces. For example: radiators, pipes, fences, or other
enclosures.
• Keep the operator's area free of clutter. Pick up all loose balls around the
machine and keep ball supply in a pail, bucket or other suitable container.
Cluttered operating areas invite accidents.
• Do not allow children to operate the cricket machine. You must be at
least 18 years of age or older and instructed in the proper operation,
maintenance, care, and storage of this machine before operating it. Close
supervision is necessary when this machine is used near children.
• Use the right ball. Use only JUGS Dimpled-Style Cricket balls, or regulation
size cricket balls in this machine
5

6
• Inspect extension cords periodically and replace if damaged.
• Use the proper extension cord. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough
to carry the current your machine will draw. An undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. A wire
gauge size (AWG) of at least 16 is recommended for an extension cord 25
feet or less in length. If in doubt, use the next heavier gauge. The smaller
the gauge number, the heavier the cord.
• Do not abuse the cord. Never yank cord to disconnect it from receptacle.
Keep cord away from heat, oil, and sharp edges. Stay constantly aware of
cord location and keep it well away from the rotating tires.
• Dress properly. Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewelry. They can get caught and draw you into the
moving parts. Long hair should be tied up and tucked under hats and
helmets. Severe physical harm may result if loose clothing, jewelry or hair
is caught in rotating tires.
• Always wear safety glasses and batting helmets while the wheels are
rotating. Debris on the tires can fly off and cause physical harm. Everyday
eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
• Never touch rotating tires. Do not put hands or fingers into ball feed
chute. Hands and fingers should only go to the edge of the chute.
• Inspect machine before every use. If damaged, have repaired by a
qualified JUGS service technician.
• Inspect tires before every use. Be sure tires are free of grit and debris
before turning on machine. Check tire pressure.
• Do not use machine if ON/OFF switch does not work. In the unlikely
event that the switch becomes defective, have it replaced by a qualified
JUGS service technician.
• Keep machine clean, and free of grit and dirt. With the machine
unplugged, use only a clean damp cloth for cleaning. Never use brake
fluids, gasoline, petroleum-based products, or any solvents to clean
machine.
Rules For Safe Operation

7
• To protect the operator, a protective screen must be placed in front of
the cricket machine.
• Only operate and store this cricket machine in a clean, dry location. Do
not use outdoors if it is raining. If machine becomes wet, do not use. A
potential shock hazard exists if this machine is used while or after it has
been exposed to water. Hand dry surface water from machine with a clean
cloth and allow the machine to completely air dry before its next use.
• Avoid awkward operations and hand positions where a sudden slip
could cause your hand to move into the rotating tires. ALWAYS make
sure you have good footing and balance.
• Replacement parts. All repairs, whether electrical or mechanical, should
be made by a qualified JUGS service technician. When servicing, use only
JUGS replacement parts.
• Do not operate this machine under the influence of drugs, alcohol, or
any medication.
• Stay alert and exercise control. Watch what you are doing and use
common sense. Do not operate this machine when you are tired. Do not
rush.
• Avoid accidental starting when reconnecting to a power supply. Always
turn off machine before disconnecting it from power source. Never leave
machine running unattended. Turn the power off. Do not leave machine
until tires come to a complete stop.
SAVE THIS MANUAL: Refer to it often and use it to instruct other users.
Do not loan your cricket machine to anyone who has not been instructed in its
use. If you do loan your machine, be sure this manual goes with it.
▲
! WARNING: Do not allow your familiarity with the machine to cause
you to be careless. Remember that a careless fraction of a
second is enough time to inflict severe injury to yourself
or others.
Rules For Safe Operation

8
Grounding Instructions
This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be
connected to an appropriate GFCI outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have the proper
outlet installed by a qualified electrician. Improper connection of the
equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair or replacement
of the electric cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to whether the
pitching machine is properly grounded.
Extension Cords
Use only 3-wire 16 AWG or larger grounding type extension cords that have
3-prong grounding plugs and 3-pole receptacles that accept the machine's
plug. When using the machine at a considerable distance from a power source,
use an extension cord heavy enough to carry the current that the machine will
draw. An undersized extension cord will cause a drop in line voltage, resulting
in a loss of power and causing the motor to overheat. Only round jacketed
cords listed by Underwriter's Laboratories (UL) should be used.
When working with the machine outdoors, use an extension cord designed for
outside use. This is indicated by the letters “WA” on the cord's jacket. Before
using the extension cord, inspect it for loose or exposed wires and cut or worn
insulation.
Electrical

9
▲
!WARNING: Keep the cord away from the rotating tire area. Repair or
replace a damaged or worn cord immediately.
Electrical Connection:
Your JUGS BP™2 Cricket Bowling Machine is powered by two 90 volt motors
(180 for 220V.) Do not operate this machine on direct current (DC). A substantial
voltage drop will cause a loss of power and the motor will overheat. If the
machine does not operate when plugged into an outlet, double check the
power supply. Your pitching machine will operate under a standard 110/220
voltage AC outlet. Do not use an adapter with this product.
This machine is intended for use on a circuit that has an outlet like the one
shown in Figure 2. It also has a grounding pin like the one shown.
GROUNDED GFCI
OUTLET BOX
GROUNDING PIN
Electrical
Figure 2

10
Terminology
TIRE
MOTOR
SHIELD
GOOSE NECK
TIRE
VERTICAL MICRO-
ADJUSTMENT KNOB
SELECT-A-PITCH™
KNOB
SPEED DIAL
TIRE POSITION
KNOB
UPPER GRIP
HANDLE
TIRE/MOTOR
ASSEMBLY
TIRE/MOTOR
ASSEMBLY
BASE
BALL CHUTE
BALL CHUTE
CONTROL BOX
HORIZONTAL MICRO-
ADJUSTMENT KNOB
VERTICAL MICRO-
ADJUSTMENT KNOB
HORIZONTAL MICRO-
ADJUSTMENT KNOB
LEG PINS
MOTOR
SHIELD
SHIELD
MOTOR CORD
GRIP HANDLE
CURLY CORD
INNER LEGS
OUTER LEGS
WIRE GUARD
MOTOR CORD
Figure 3
JUGS BP®2 Cricket Bowling Machine

▲
11
• Carefully lift machine from carton and place on level surface.
• Make sure you have all the parts (See Figure 3). If any parts are missing, do
not operate the machine until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
• Do not discard the packing materials until you have carefully inspected
the machine, identified all the parts, and satisfactorily operated the
machine.
NOTE: If any parts are damaged or missing, do not attempt to plug in the power
cord and turn on switch until the damaged or missing parts are obtained and are
installed correctly.
! WARNING: To prevent accidental starting or electrical shock that could
cause possible serious injury, assemble all parts to your machine
before connecting it to the power supply. The bowling machine
should never be connected to a power supply when you are
assembling parts, making adjustments, cleaning, servicing, or
when not in use.
Unpacking
Set Up
I ncludes the followng:
• Three, sturdy, 46" steel hollow
inner legs
• Three, sturdy, 47" steel hollow
outer legs
• Three 1/2" -13 x 2 1/4" hex bolts
• Three 1/2" -13 hex nuts
• Three 1/2" -13 x 3/4" hex flange
bolts
• Three crutch tips for indoor use
Features:
• Three height adjustments for
different levels of play
• Retractable design for easy trans-
portation
• Dual bolts for a safe and sturdy
leg base
JUGS Adjustable Cricket-Bowling-Machine Legs

12
Setup
Your JUGS Cricket machine is equipped with three 2-piece adjustable legs
for different levels of play.
Legs Joined (Side View)
Inner Leg Outer Leg
Hole 1 2 3 Outer Leg Hole
Hole 3
Delivery Heights
• Position 1
Total Leg Length: 69.5 inches (176 cm)
For junior-level play, slide inner legs all the way until hole #1 lines up with the
outer leg hole (see illustration above). Insert one 1/2" x 2 1/4" hex bolt through
both legs. Place one 1/2" hex nut on end of bolt and tighten. Tighten the flange
bolt as well (see figure 4).
• Position 2
Total Leg Length: 75 inches (190 cm)
For college-level play, slide inner legs all the way until hole #2 lines up with the
outer leg hole (see illustration above). Insert one 1/2" x 2 1/4" hex bolt through
both legs. Place one 1/2" hex nut on end of bolt and tighten. Tighten the flange
bolt as well (see figure 4).
• Position 3
Total Leg Length: 83.5 inches (212 cm)
For test-level play, slide inner legs all the way until hole #3 lines up with the outer
leg hole (see illustration above). Insert one 1/2" x 2 1/4" hex bolt through both
legs. Place one 1/2" hex nut on end of bolt and tighten. Tighten the flange bolt as
well (see figure 4).
• Total height (surface to top of vertical wheel) is 96 inches (244 cm).
• Set of Cricket legs weighs 43 lbs (19.5 kilos).
• Use a 3/4-inch (19 mm) wrench for hex-head bolts and nuts.
Hole 1
Hole 2
(Drawings are not to scale.)

▲
Setup
13
▲
• To move the BP®2, make sure machine is locked in fast/medium pace
position, slowly tip machine over until tires rest on the ground. Grasp and
lift two legs and roll on wheels to new position as you would a wheelbarrow.
The JUGS BP®2 will fit in the trunk of a car by removing its legs.
• Do not roll tires on surfaces that might damage the tire. If the tire becomes
deformed, flat, or damaged, it must be repaired before using the machine.
(See tire specifications, Page 24 and 25.)
!WARNING: Never leave cricket machine unattended.
Transporting
1. With the machine flat on the ground, attach legs by inserting pinned end
of legs (3 total) into base until pins are completely engaged
2. Place rubber crutch tips on lower end of legs if BP®2 is to be used indoors.
The leg crutch tips are not recommended for outdoor use.
3. Lift the cricket machine upright.
IMPORTANT: Always set up the cricket machine so that the two legs are
positioned in front, facing the pitching screen and batter, and one leg facing
back toward the operator.
4. Check speed dial and make sure that it is in full counter-clockwise position
—pointer at OFF position. (Figure 5.)
5. Plug heavy-duty, No. 18 gauge three-prong, extension cord into 110-volt
GFCI outlet (220-volt for 220V models) and connect to short cord on
pitching machine. Place a pitcher's screen in front of the cricket machine
to protect the operator and the cricket machine from batted balls.
! WARNING: Make sure that the Tire Position Knob is fully engaged before
operating machine.

14
1. Operators of JUGS Cricket Machines must wear safety glasses and batting
helmets at all times.
2. Check speed dial and make sure that it is in full counter-clockwise position
—pointer at OFF position. (See figure 5.)
3. For either 110V or 220V, plug heavy-duty no. 18 gauge three-prong
extension cord into an AC outlet and connect to short cord on cricket
machine. Place the bowler's screen in front of the cricket machine to
protect the operator and the cricket machine from batted balls.
4. Position machine at desired distance from target.
5. Turn Speed Dial to desired speed.
6. Have all batters and observers stand well clear of the target as you deliver
practice balls. To adjust trajectory, use the Vertical Micro-Adjustment
Knob. To adjust in and out (right or left), use the Horizontal
Micro-Adjustment Knob (see figure 4b.) It is normal to feed five or six balls
before arriving at the setting you desire. Always have the batter stand clear
while adjusting your JUGS cricket machine.
7. At the beginning of practice, or after any change in speed, curve, or
trajectory, have the batter stand well clear while at least one test ball is fed
to make sure the ball is delivered at the desired target. If you move the
machine for any reason, repeat this process.
8. Deliver balls at speeds the batter can learn to hit. As the batter's skills
increase you can bowl faster deliveries.
Operation
Figure 4b. Micro-Adjustment Knobs

15
▲
!WARNING: A protective screen must be used to protect the operator and the
machine from batted balls.
NOTE: We suggest that each operator spend a couple of hours
experimenting with the JUGS cricket machine. Try many different speed
settings. Do not be afraid that any setting you make will harm the cricket
machine; however, you should use a wide backstop when experimenting with
faster speeds.
9. When you increase speed of any delivery, using the Vertical Micro-
Adjustment Knob, you must lower elevation of aim; when you decrease
speed, you must increase the aim elevation. Use the Vertical Micro-
Adjustment Knob to change the elevation up or down.
10. Space all deliveries approximately six seconds apart. Try to get the batter
to regard each delivery as a “separate” ball and not to be an “automatic”
swinger.
11. Always “show” the ball to batter. When you are certain the batter has
acknowledged that he or she is ready, set ball in feed chute and release.
Do not drop the ball into the chute.
12. Do not permit more than one or two persons around the cricket machine
during its operation.
13. Do not permit the cricket machine to fall on its wheels. This could result
in non-warranty damage.
14. Check tightness of all bolts and nuts at regular intervals. If any looseness,
vibration, or rattle is noticed, correct immediately before further use.
15. Always turn speed dial to the full counter-clockwise position—pointer at
OFF position, when throwing is completed or temporarily stopped.
Operation

Bowling to Batters
Follow all safety performance instructions in this manual. The following
feeding instructions should be used to insure accurate and efficient operation
of the JUGS cricket machine.
Important Cricket Machine Feeding Instructions:
• When feeding the machine with official leather cricket balls, hold the ball
the same way every time.
• Have all batters and observers stand well clear of the target as you bowl
test balls to adjust trajectory and aiming point.
• VERY IMPORTANT: Before you place the ball in the feeding chute, you
should look up at the batter and make absolutely sure the batter is
watching you and is ready to receive the delivery. It is extremely important
that you make sure that the immediate area in front of the bowling
machine and the flight path of the ball is clear before you feed the balls
into the bowling machine.
• When the batter has taken his/her stance and indicates he or she is ready
to hit, hold the ball high in the air where the batter can see the ball. Then
bring the ball down to the chute simulating live action so that the batter
can time the ball correctly. Set the ball in the feed chute and release. Do
not drop the ball into the chute. Watch the ball into the wheels, then look
up at the batter. The whole feeding operation should be smooth and
without interruption.
• Every batter, after taking his/her stance, as well as between deliveries,
goes through a personal readiness routine. The ball feeder should adjust
the delivery spacing to each batters' habits accordingly. This will assure
that the batter is ready to receive the delivery and will also help to simulate
live action. The batter can then regard each delivery as a separate ball and
avoid becoming an “automatic swinger”. Generally speaking, deliveries
can be spaced between 6 and 10 seconds apart.
16
Operation

Figure 5. Control Panel
• Out-of-round, soft, mushy, or wet balls will affect accuracy of deliveries
and must not be used. Mixing different types of balls (leather, rubber,
JUGS, etc.) will affect consistency of deliveries. For best accuracy, feed only
one type of ball at a time.
• Use only JUGS Dimpled-Style Cricket balls, or regulation size cricket balls.
• Do not permit more than one or two persons around the cricket machine
during its operation.
BATTING HELMETS MUST BE WORN AT ALL TIMES.
• Operators of JUGS Cricket Machines must wear safety glasses and batting
helmets at all times.
17
Operation

▲
18
Figure 6b. Tire Positions
Bowling Different Deliveries: Tire Position Adjustment
When your machine arrives it is in the fast/medium pace tire position. Changing
from one delivery to another is done by simply following these three steps.
1. With one hand firmly hold the Top Handle
2. While holding the Top Handle, using your free hand, pull the Tire Position
Knob out, disengaging it from the Tire/Motor Assembly. (figure 6.)
3. Using the Tire Position diagram located on the face of the Feed Chute,
rotate the Tire/Motor Assembly to the desired position and reengage the
Tire Position Knob by pushing it in all the way. The Tire/Motor Assembly
should now be locked in the tire position for the desired delivery.
There are six wheel positions to choose from (figure 6b.)
! WARNING: When disengaging the Tire Position Knob, the Tire/Motor
Assembly will want to swing freely. To avoid injury, a solid grip is
required before disengaging the Tire/Motor Assembly and must
be maintained until the Tire/Motor Assembly is reengaged with
the Tire Position Knob fully inserted. (figure 6a.)
Figure 6.
Figure 6a.
Operation