Jumpflex ANCHORKIT Hero Series User manual

ANCHORKIT™ Hero Series
Assembly
Manual
Version AK1.0

Warning: The Jumpex® ANCHORKIT™ is only
a preventative measure and Jumpex® does not
claim or guarantee the ANCHORKIT™ will prevent
your trampoline and or property from sustaining
damage of any kind.
Warning: Wind conditions can change frequesntly,
please take extra precautions if winds are strong.
ANCHORKIT™ Hero Series
Assembly Manual
2

ANCHORKIT™ Hero Series
Assembly Manual 3
# Part Description Quantity
1Bracket 4
2Peg 8
ANCHORKIT™ Parts List

ANCHORKIT™ Hero Series
Assembly Manual
4
Assembly Instructions
01
02
Place the Bracket (1) in the center of the lower rail between two legs. Ensuring
either side of the Bracket (1) touches the ground.
Insert the Peg (2) through the outer hole on the Bracket (1) at a 45 degree
angle. Push or hammer the Peg (2) into the ground.

ANCHORKIT™ Hero Series
Assembly Manual 5
Insert the Peg (2) through the inner hole on the Bracket (1) at a 45 degree
angle. Push or hammer the Peg (2) into the ground.
Repeat the steps, placing the ANCHORKIT™ assemblies on opposite sides of
the trampoline.
04
03

USA
ph. 1866 305 7238
www.jumpex.com
Canada
ph. 1866 305 7238
www.jumpex.ca
UK
ph. 0330 010 4301
www.jumpex.co.uk
Australia
ph. 1800 586 735
www.jumpex.com.au
New Zealand
ph. 0800 586 735
www.jumpex.co.nz
play for life