Jule Amps monique User manual

Monique
The finest bass preamplifier in the world
Monique gives you the tone and playing characteristics of the greatest all tube bass amps in a
package that won't break your back. Whether it is through the recording console, the house
P or any other power amplifier, Monique is going to give you sound and playing
characteristics you will adore.
She is an absolute tone monster.
Step 1. First, plug an IEC C power cable into the receptacle on the back of Monique.
Monique comes to you ready for the C power in your country, no matter where you live.
Cable up your bass and plug it into the input on the right front of Monique.
Step 2. To turn her up for the first time, connect any amplifier with a speaker to Monique.
Connect the “Line Out” of Monique to the “Input” of your mplifier. “Line Out” is on the back of
Monique. ny good 1/4” instrument cable will work for this. Before you turn your amplifier on,
make sure the Line Level of Monique is all the way off.
lternatively, Monique can be connected directly to the “ mp Input” of any amplifier out there.
Sometimes this is labeled “Power mp In.” Doing this bypasses the EQ stages of the
mplifier and can deliver a more precise (less muddy) playing experience. You can also
connect Monique directly to the Effects Return of many amplifiers.
Step 3. To start out, It is a good idea to “zero out” the Baxandall EQ by putting all three knobs
straight up at noon. When these three knobs are straight up, you are running the EQ
completely flat.
Step 4. Now, with Monique connected to the Input of your amplifier, you can turn your
amplifier ON. Give the amplifier a bit of volume.
Step 5. Turn up the volume on your bass and then slowly turn up Monique's Line Out Knob
(CW) until you can hear yourself playing.
That's it for all the instructions you really have to know. From here on out it is all a matter of
what you want to create with this tone monster.
Jule mps
343 Soquel venue #304, Santa Cruz C US 95062 www.juleamps.com 661 428 9394

Monique has three significant functions. We'll talk about each separately, but they are
completely interactive.
1. n all tube bass preamplifier.
2. three stage baxandall tube equalizer.
3. dual drive (DI and Line Level) output section with capabilities for the studio and for
the stage.
1. The Preamplifier
The “Sensitivity” control may be the easiest single place on Monique to control the tone and
playing characteristics with one knob. The farther you adjust to the right (CW) the more drive
you will hear from Monique. This Sensitivity control gives you tones from pristine clean to rich
harmonics that you may have never experienced before.
When we speak of playing characteristics we are talking about how sensitive Monique is to
your string attack pressure (among other things). Some of our customers describe it as
control over the “feel” of your bass. The Sensitivity control has a lot to do with the playing
characteristics of Monique, as well as the match-up to your bass whether it has active or a
passive pickups.
The Sensitivity knob is a push/pull knob. The push/pull function was originally designed to
accommodate the lightest wound passive bass guitars pickups (pulled out) and very high
output active pickups (pushed in) with one knob. When that Sensitivity knob is pulled out, you
are adding 4db to the overall headroom of the front end of Monique
Monique was designed to work with active pickups with the Sensitivity knob pushed in. The
truth is she can work well in both positions for both types of pickups. ll that matters is what
you prefer. Remember the tone monster idea.
Jule mps
343 Soquel venue #304, Santa Cruz C US 95062 www.juleamps.com 661 428 9394

2. The Equalizer
The baxandall equalizer of Monique may be one of the finest all tube equalizers ever made
for bass. It is an equalizer that is not interactive. This means that each of the three knobs
(Treble, Mid, Bass) can be adjusted without forcing you to have to tweak the others to find the
tone you want.
Each of the three knobs of the Monique equalizer gives you approximately +20db on the right
side of the knob, and -20db on the left side of the knob.
By itself, the baxandall equalizer of Monique is a very powerful tone creation tool. In the 12
o'clock position the tone is entirely flat, unaffected by the equalizer. From that 12 o'clock
position you have a whole world of capabilities.
By example, if you turn all three equalizer knobs full right, you have added about 60db of gain
to the picture. Monster.
3. The Output Section
s to what comes out of Monique, you have already used one half of her outputs.
The Line Out jack you are already using works well connected to a combo amp on stage.
That way you have full control over your personal monitor. The Line Out control knob is on the
front of Monique – to give you control over your sound on stage.
The same Line Out jack also works very well connected up to a Class D solid state bass amp.
She will drive any amp with a sensitivity no greater than 1.44 volts to maximum volume (.775
volts with the Line Out knob pushed in. See below).
Monique has a built in option to increase the the Line Out level from the original maximum
output level of 0db (.775 volts) to more than +4db (1.44 volts). To add the additional 4db to
both the Line Output and the Balanced XLR Output just pull out the Line Out knob. Pushed in,
Monique is exactly at the original 0db (.775 volt) levels.
Many customers will never pull the Line Out knob. The Push/Pull Line Out feature is there to
increase the opportunities to work with more Class D amplifiers.
Since you are adding a lot of level when you pull the Line Out Knob out, make sure you do
not pull the Line Out Knob out toward you unless it is turned fully off (CCW). If you pull it out
when it is turned up it will “pop” and disrupt the mix or the performance.
Jule mps
343 Soquel venue #304, Santa Cruz C US 95062 www.juleamps.com 661 428 9394

With the Line Output knob pulled out (+10db), and the extra +4db added when the Sensitivity
knob is pulled out, it will be possible to overload some amps, and even some consoles. With
this in mind, start out with both the Line Out Level and the Balanced Out Level on Monique
turned to zero (CCW). Then turn up to dial in your sweet spot.
The DI Output of Monique is a (Cinemag) transformer driven balanced XLR output. This 600
ohm output was originally intended to drive a microphone cable on stage going directly to the
sound engineer, or for the studio. It can drive hundreds of feet of microphone cable with no
hum and no signal loss.
The level control for the Balanced XLR output is on the back of Monique in the Dove Cage
and the Bamboo Moniques and on the front for the Rack Mount Monique and the Tardis
Monique.
The Line Out and the Balanced XLR Out of Monique are completely separate outputs. They
are Post EQ. You can use them together or individually. Monique doesn't care.
Monique is entirely hand wired and assembled right here in Santa Cruz California, US .
Every component in Monique is individually selected and individually tested. Yes, she is
pretty, but she is entirely road worthy.
Customers have noticed that the tubes will move a bit. The tubes are rubber mounted by
design. In the years of very high end High Fidelity tube audio (yes, Jule is that old), all tubes
were rubber mounted. This is good for rough wear, but it is more important as a way to isolate
low end vibration from the tubes that will affect the tone.
The relationship Jule mps has with customers is one that allows us the privilege of making
music around the world. That is extremely important.
For the above reason, if Monique ever does something that you do not understand or you do
not like, please let us know. On the other side of the picture, remember us when you hit the
big time.
We have gear around the world, on tour and in studios, with tubes that have not been
changed in more than 10 years of very active service. Tubes are supposed to eventually wear
out. For the first year you own your Monique, we will repair or replace any failed component.
fter that, please give us a call and we'll do what we can. We are proud to be a part of your
music.
Jule mps
343 Soquel venue #304, Santa Cruz C US 95062 www.juleamps.com 661 428 9394

Jule mps
343 Soquel venue #304, Santa Cruz C US 95062 www.juleamps.com 661 428 9394