Jumpflex PROJAM Hero Series User manual

PROJAM™ Hero Series
Assembly
Manual
Version PJ1.0

Warning: Read all assembly, installation, care
maintenance and usage instructions in the manual
prior to assembling and using the Jumpex®
product.
These products are for personal use only by one
person aged 6 years and older.
These products are for outdoor use only.
Warning: For domestic use only. Adult assembly
required.
Risk Warning: The use of this product involves a
signicant risk of participants suffering personal
injury, including the possibility of serious injuries,
permanent disability or death. All participants who
engage in activities with the product do so at their
own risk.
PROJAM™ Hero Series
Assembly Manual
2

Contents
PROJAM™ Parts List 4
Setup Options 5
PROJAM™ Hero Series
Assembly Manual 3
High Mount Assembly Instructions 6
Low Mount Assembly Instructions 17

# Part Description Quantity
1Backboard and Hoop 1
2Fibreglass Rod Connector 4
3Fibreglass Rod End 4
4High Mount Cross Bracket 1
5Low Mount Cross Bracket 1
6Low Mount Net Connector 2
7Low Mount Pole Strap 2
8Basketball 1
9Ball Pump 1
PROJAM™ Parts List
PROJAM™ Hero Series
Assembly Manual
4

PROJAM™ Hero Series
Assembly Manual 5
Setup Options
High Mount
Low Mount
High mount option, ideal for big jumpers and big air slam dunks! Please follow
assembly instructions on page 6.
Low mount option, compatible with SMARTSHADE™ sun cover and great for little
jumpers. Please follow assembly instructions on page 17.

Lay the Backboard and Hoop (1) face down.
PROJAM™ Hero Series
Assembly Manual
6
01
High Mount Assembly Instructions

Join together 4x Fibreglass Rod Connectors (2)
and 4 x Fibreglass Rod Ends (3).
PROJAM™ Hero Series
Assembly Manual 7
02

03
Thread one connected breglass rod
assembly through the webbing loop
on the backboard and into the bottom
corner pocket.
PROJAM™ Hero Series
Assembly Manual
8

Repeat step 03 on the other side.
PROJAM™ Hero Series
Assembly Manual 9
04

Insert each end of the breglass rods into the High
Mount Cross Bracket (4) as shown.
PROJAM™ Hero Series
Assembly Manual
10
05

Thread another breglass rod assembly into
the High Mount Cross Bracket (4) and insert
the other end into the corner pocket.
PROJAM™ Hero Series
Assembly Manual 11
06

Repeat step 6 on the other side.
PROJAM™ Hero Series
Assembly Manual
12
07
Pull the corner of the backboard away
from the center and pre-bend the
breglass rod to create enough space
to insert the rod into the corner pocket.

Select any of the enclosure
net poles on your Jumpex®
Hero Series Trampoline where
you would like to position the
PROJAM™. Remove the top
screw cap on the selected net
pole, place the assembled High
Mount Cross Bracket (5) over
the thread and re-screw the top
screw cap in place.
PROJAM™ Hero Series
Assembly Manual 13
08
Attaching to your Jumpex® Trampoline

Clip the backboard carabiners through the safety net to
secure the bottom corners in place.
PROJAM™ Hero Series
Assembly Manual
14
09

Adjust the hoop straps to ensure the hoop is sitting horizontally.
PROJAM™ Hero Series
Assembly Manual 15
10

PROJAM™ Hero Series
Assembly Manual
16
11
Use the provided Ball Pump (9) to inate the Basketball (8).

PROJAM™ Hero Series
Assembly Manual 17
01
Low Mount Assembly Instructions
Lay the Backboard and Hoop (1) face down.

PROJAM™ Hero Series
Assembly Manual
18
02
Join together 4x Fibreglass Rod Connectors (2)
and 4 x Fibreglass Rod Ends (3).

PROJAM™ Hero Series
Assembly Manual 19
03
Thread one connected breglass rod
assembly through the webbing loop
on the backboard and into the bottom
corner pocket.

PROJAM™ Hero Series
Assembly Manual
20
04
Repeat step 03 on the other side.