Jumpflex PROJAM UK FLEX Series User manual

PROJAM™ UK FLEX Series
Assembly
Manual
Version PJ1.0

Warning: Read all assembly, installation, care
maintenance and usage instructions in the manual
prior to assembling and using the Jumpex®
product.
These products are for personal use only by one
person aged 6 years and older.
These products are for outdoor use only.
Warning: For domestic use only. Adult assembly
required.
Risk Warning: The use of this product involves a
signicant risk of participants suffering personal
injury, including the possibility of serious injuries,
permanent disability or death. All participants who
engage in activities with the product do so at their
own risk.
PROJAM™ Hero Series
Assembly Manual
2

Contents
PROJAM™ Parts List 4
Setup 5
PROJAM™ Hero Series
Assembly Manual 3
Assembly Instructions 6

# Part Description Quantity
1Backboard and Hoop 1
2Fibreglass Rod Connector 4
3Fibreglass Rod End 4
4High Mount Cross Bracket 1
5Basketball 1
6Ball Pump 1
7PROJAM™ Adapter 1
PROJAM™ Parts List
PROJAM™ UK FLEX Series
Assembly Manual
4

PROJAM™ UK FLEX Series
Assembly Manual 5
Setup
High Mount
Ideal for big jumpers and big air slam dunks!

Lay the Backboard and Hoop (1) face down.
PROJAM™ UK FLEX Series
Assembly Manual
6
01
High Mount Assembly Instructions

Join together 4x Fibreglass Rod Connectors (2)
and 4 x Fibreglass Rod Ends (3).
PROJAM™ UK FLEX Series
Assembly Manual 7
02

03
Thread one connected breglass rod
assembly through the webbing loop
on the backboard and into the bottom
corner pocket.
PROJAM™ UK FLEX Series
Assembly Manual
8

Repeat step 03 on the other side.
PROJAM™ UK FLEX Series
Assembly Manual 9
04

Insert each end of the breglass rods into the High
Mount Cross Bracket (4) as shown.
PROJAM™ UK FLEX Series
Assembly Manual
10
05