JumpXfun 6270 9155409 User manual

1
Assembly Dos and Don’ts:
Please read this dos and don’ts guide and then start to assemble the trampoline by
following the details in the owners manual.
Incorrect assembly process will cause damage to the trampoline frame.
1. Please make sure the trampoline is placed on level ground. Erecting on uneven
ground may cause the trampoline frame to warp.
2. Please make sure that all the nuts and bolts holding the frame joints are completely
tightened before installing the springs. Failure to do this properly will cause frame to
warp.

2
3. When loading the springs DO NOT use your leg to push against the trampoline frame
to gain leverage as this will cause the trampoline to warp.
4. Please DO NOT load the springs onto the frame on only one side of the trampoline.
The tension created by the springs when unevenly distributed will cause the frame to
warp.
5. If the trampoline frame warps up, do not be alarmed as the joint system is designed
to be flexible. Simply push down on the part of frame that has warped with two
persons as shown. The frame should level out.