JVC KD-S717 User manual

GET0014-001A
[EE]
INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
ENGLISH
РУССКИЙ
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
COMPACT
DIGITAL AUDIO
For installation and
connections, refer to the
separate manual.
Указания по установке и
выполнению соединений
приводятся в отдельной
инструкции.
В соответствии с Законом Российской Федерации “О защите
прав потребителей” срок службы (годности) данного товара “по
истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или
окружающей среде” составляет семь (7) лет со дня производства.
Этот срок является временем, в течение которого потребитель
данного товара может безопасно им пользоваться при условии
соблюдения инструкции по эксплуатации данного товара, проводя
необходимое обслуживание, включающее замену расходных
материалов и/или соответствующее ремонтное обеспечение в
специализированном сервисном центре.
Дополнительные косметические материалы к данному товару,
поставляемые вместе с ним, могут храниться в течение двух (2) лет
со дня его производства.
Срок службы (годности), кроме срока хранения дополнительных
косметических материалов, упомянутых в предыдущих двух пунктах,
не затрагивает никаких других прав потребителя, в частности,
гарантийного свидетельства JVC, которое он может получить в
соответствии с законом о правах потребителя или других законов,
связанных с ним.
KD-S717
KD-S717 COVER [RUS] 18.10.00, 12:153

2
РУССКИЙ
DANGER: Invisible laser
radiationwhenopen and
interlock failedordefeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e)
ADVARSEL:Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydereerude
af funktion. Undgåudsæt-
telse for stråling. (d)
VARNING:Osynliglaser-
strålning när dennadel
är öppnadochspärren
är
urkopplad. Betrakta
ej
strålen. (s)
VARO: Avattaessa jasuo-
jalukitus ohitettaessa olet
alttiina näkymättömälle
lasersäteilylle. Älä katso
säteeseen. (f)
Caution:
This product contains a laser component
of higher laser class than Class 1.
ИНФОРМАЦИЯ О ЛАЗЕРНЫХ УСТРОЙСТВАХ
Предостережения:
1. ЛАЗЕРНОЕ УСТРОЙСТВО КЛАССА 1
2.ОПАСНОСЬ: В случае открытия и удаления кожу-
ха существует опасность невидимого лазерного
излучения. Избегайте непосредственного
воздействия луча.
3.ПРЕДОСТЕРЕЖЕНИЕ: Не открывайте верхний
кожух. Внутри устройства нет деталей, обслужи-
ваемых пользователем. Пользуйтесь услугами
квалифицированного персонала.
4.ПРЕДОСТЕРЕЖЕНИЕ: Этот проигрыватель
компакт-дисков использует невидимое лазерное
излучение и оснащен переключателями безопас-
ности, устраняющими излучение при удалении
компакт-дисков. Устранять переключатели
безопасности опасно.
5.ПРЕДОСТЕРЕЖЕНИЕ: Использование средств
управления, настроек, или выполнение процедур,
отличных от указанных ниже, может подвергнуть
Вас опасному воздействию излучения.
Предостережение:
Это устройство оснащено лазерным
компонентом, превышающим
ограничения для лазерных устройств
класса 1.
Position And Reproduction Of Labels / Расположение и внешний вид маркировок
IMPORTANT FOR LASER PRODUCTS
Precautions:
1. CLASS 1 LASER PRODUCT
2.DANGER: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3.CAUTION : Do not open the top cover. There are no
user-serviceable parts inside. Leave all servicing to
qualified service personnel.
4.CAUTION : This CD player uses invisible laser
radiation and is equipped with safety switches to
prevent radiation emission when unloading CDs. It is
dangerous to defeat the safety switches.
5.CAUTION : Use of controls, adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Name/Rating plate
Название/Классификационная табличка
Bottom panel of the main unit
Дно основного устройства
ENGLISH
EN02-04.KD-S717 [RUS] 18.10.00, 14:062

3
РУССКИЙ
How to reset your unit / Перезагрузка Вашего устройства
Press and hold both the SEL (select) and (standby/on/attenuator) buttons at the same
time for several seconds.
This will reset the built-in microcomputer.
Одновременно нажмите кнопки SEL (выбор) и (ожидание/включено/приглушение)
и удерживайте нажатыми в течение нескольких секунд.
Это приведет к перезагрузке встроенного микрокомпьютера.
Notes:
• Your preset adjustments — such as preset channels or sound adjustments — will also be erased.
• If a CD is in the unit, it will eject when you reset the unit. Pay attention not to drop the CD.
Примечания:
• Выполненные Вами настройки — например, запрограммированные каналы или настройки звучания
— также будут удалены.
• Если в устройстве остался компакт-диск, при перезагрузке он будет выдвинут. Следите за тем,
чтобы компакт-диск не упал.
(Standby (ожидание)/On (включено)/Attenuator (приглушение))
SEL (Select/Выбор)
ENGLISH
EN02-04.KD-S717 [RUS] 18.10.00, 14:063

4
ENGLISH
BEFORE USE
* For safety....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
How to reset your unit............................... 3
LOCATION OF THE BUTTONS ............ 5
Control panel ............................................ 5
BASIC OPERATIONS ...................... 6
Turning on the power................................ 6
RADIO BASIC OPERATIONS ............. 7
Listening to the radio ................................ 7
Storing stations in memory ....................... 8
Tuning into a preset station ...................... 9
CD OPERATIONS .......................... 10
Playing a CD............................................ 10
Locating a track or a particular portion
on a CD ................................................. 11
Selecting CD playback modes ................. 11
Prohibiting CD ejection ............................. 11
SOUND ADJUSTMENTS .................. 12
Turning on/off the loudness function ........ 12
Adjusting the sound ................................. 12
Using the Sound Control Memory ............ 12
Storing your own sound adjustments ....... 13
OTHER MAIN FUNCTIONS ............... 14
Setting the clock ...................................... 14
Changing the general settings (PSM) ...... 14
Detaching the control panel...................... 16
TROUBLESHOOTING...................... 17
MAINTENANCE ............................ 18
Handling CDs .......................................... 18
SPECIFICATIONS .......................... 19
* Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
CONTENTS
EN02-04.KD-S717[EE]2 00.11.23, 5:55 PM4

ENGLISH
5
Control panel
1(standby/on/attenuator) button
2Control dial
3LOUD button
4AM button
5CD button
6FM button
70(eject) button
84/¢buttons
• Also functions as SSM buttons when pressed
together.
9SEL (select) button
pDISP (display) button
qNumber buttons
wSCAN
RPT (repeat) button
eMO (monaural)
RND (random) button
rSCM (sound control memory) button
t(control panel release) button
ewq
Display window
yVolume (or audio) level indicator
Equalization Pattern indicator
uTuner reception indicators
MO, ST
iRND (random) indicator
oRPT (repeat) indicator
;“SCM” indicator
aLOUD indicator
sSound mode indicators
SOFT, BEAT, POP
dCD indicator
fBand indicators
FM1, FM2, FM3, AM
gMain display
hCD IN indicator
9rt
p
32671854
fgd
Display window
yoi
u;as
h
LOCATION OF THE BUTTONS
EN05-05.KD-S717[EE]2 00.11.23, 5:55 PM5

6
ENGLISH
BASIC OPERATIONS
4 Adjust the sound as you want
(see page 13.)
To drop the volume in a moment
Press briefly while listening to any
source.“ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you rotate the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold for more than 1 second.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 15.
CAUTION on Volume Setting
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the tuner,
for example, the speakers may be damaged by the
sudden increase in the output level. Therefore, lower
the volume before playing a disc and adjust it as
required during playback.
Turning on the power
1 Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on.You do not have
to press this button to turn on the power.
2 Select the source.
To operate the tuner (AM or FM),
see pages 7 – 9.
To operate the CD player,
see pages 10 – 12.
3 Adjust the volume.
To decrease the volume.
To increase the volume.
Volume level appears.
Volume level indicator
EN06-06.KD-S717[EE]2 00.11.23, 5:56 PM6

7
ENGLISH
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1 Select the band (AM, FM1 – 3).
Note:
This receiver has three FM bands (FM1, FM2,
FM3).You can use any one of them to listen to an
FM broadcast.
2 Press and hold ¢or 4
until “M”(manual) starts flashing on
the display.
Press ¢to search
stations of higher frequencies.
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1 Select the band (AM, FM1 – 3).
Note:
This receiver has three FM bands (FM1, FM2,
FM3).You can use any one of them to listen to
an FM broadcast.
2 Start searching a station.
When a station is received, searching stops.
FM1
AM
FM2 FM3
Selected band appears.
FM1
AM
FM2 FM3
Press 4to search
stations of lower frequencies.
Audio (see page 17) or volume level indicator
Selected band (or clock time: see page 17)
appears.
FM1 and FM2: 87.5 MHz – 108 MHz
FM3: 65 MHz – 74 MHz
RADIO BASIC OPERATIONS
CONTINUED ON THE NEXT PAGE
EN07-09.KD-S717[EE]2 00.12.12, 10:38 AM7

8
ENGLISH
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM
(Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
Youcanpreset 6local FMstationsin eachFM band
(FM1, FM2 and FM3).
1 Select the FM band (FM1 – 3) you
want to store FM stations into.
• Each time you press the button, the FM
band changes as follows:
2 Press and hold both buttons for more
than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3.)
These stations are preset in the number buttons —
No.1(lowest frequency)to No.6(highestfrequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
3 Tune into a station you want while“M”
is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals
(87.5 MHz - 108 MHz), in 30 kHz intervals
(65 MHz - 74 MHz) for FM and 9 kHz
intervals for AM — MW/LW) until you
release the button.
When an FM stereo broadcast is hard to
receive:
Press MO RND (monaural/random) while
listening to an FM stereo broadcast.
• Each time you press the button, the MO
indicator lights up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
Press ¢to search
stations of higher frequencies.
Press 4to search
stations of lower frequencies.
Lights up when receiving an FM broadcast in stereo.
“SSM” appears, then disappears when automatic
preset is over.
FM1 FM2 FM3
EN07-09.KD-S717[EE]2 00.11.23, 5:57 PM8

9
ENGLISH
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 8.
1 Select the band (AM, FM1 – 3).
2 Select the number (1 – 6) for the
preset station you want.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3 and AM) manually.
Ex: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1 Select the FM band (FM1 – 3) you
want to store FM stations into
(in this example, FM1).
• Each time you press the button, the FM
band changes as follows:
2 Tune into a station of 88.3 MHz.
3 Press and hold the number button
(in this example, 1) for more than
2 seconds.
4 Repeat the above procedure to
store other stations into other
preset numbers.
Press ¢to tune in
stations of higher
frequencies.
Press 4to tune in
stations of lower
frequencies.
8 9 10 11 127
FM1
AM
FM2 FM3
“P1” flashes for a few seconds.
FM1 FM2 FM3
EN07-09.KD-S717[EE]2 00.11.23, 5:58 PM9

10
ENGLISH
CD OPERATIONS
Notes:
• When a CD is inserted upside down, the CD
automatically ejects.
To stop play and eject the CD
Press 0.
CDplaystopsand theCD automaticallyejectsfrom
the loading slot.
If you change the source to FM or AM, the CD play
also stops (without ejecting the CD this time).
Notes:
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust. (CD
play will not start this time.)
• You can eject the CD even when the unit is turned off.
Playing a CD
1 Insert a disc into the loading slot.
The unit turns on,
draws a CD and starts
playback automatically.
Total track number of
the inserted disc
Elapsed playing time
Total playing time of the
inserted disc
The CD IN indicator lights up.
Current track
EN10-11.KD-S717[EE]2 00.11.23, 5:58 PM10

11
ENGLISH
Locating a track or a particular
portion on a CD
To fast-forward or reverse the track
To go to the next tracks or the previous
tracks
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
Press and hold ¢, while
playing a CD, to fast-forward the
track.
Press and hold 4, while
playing a CD, to reverse the
track.
Press ¢briefly, while
playing a CD, to go ahead to the
beginning of the next track. Each
time you press the button
consecutively, the beginning of
the next tracks is located and
playedback.
Press 4briefly, while
playing a CD, to go back to the
beginning of the current track.
Each time you press the button
consecutively, the beginning of
the previous tracks is located
and played back.
Selecting CD playback modes
To play back tracks at random (Random Play)
You can play back all tracks on the CD at random.
Each time you press MO RND (monaural/random)
while playing a CD, CD random play mode turns
on and off alternately.
When the random mode is turned on, the RND
indicator lights up on the display and a track
randomly selected starts playing.
8 9 10 11 127
The RND indicator
Prohibiting CD ejection
You can prohibit CD ejection and can lock a CD
in the loading slot.
While pressing CD, press and hold 0for
more than 2 seconds.
To cancel the prohibition and unlock the CD,
press 0again for more than 2 seconds, while
pressing CD. “EJECT” appears on the display,
and the CD ejects from the loading slot.
“EJECT” flashes on the display for about
5 seconds, and the CD is locked and
cannot be ejected.
EN10-11.KD-S717[EE]2 00.12.1, 7:16 PM11

12
ENGLISH
2 Adjust the level.
Note:
Normally the control dial works for volume
adjustment. So you do not have to select “VOL”
to adjust the volume level.
Using the Sound Control
Memory
You can select and store a preset sound
adjustment suitable for each playback source.
(Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the
display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3,AM and CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the
sources, see “To cancel Advanced SCM – SCM
LINK” on page 15.
Select the sound mode you want.
Each time you press the button, the
sound mode changes as follows:
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these
frequencies to produce a well-balanced sound at
low volume levels.
Each time you press LOUD, the loudness
function turns on/off alternatively.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1 Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
VOL Adjust the volume. 00 (min.)
|
50 (max.)
*If you are using a two-speaker system, set the fader
To increase the level.
To decrease the level.
Equalization pattern changes as you adjust the
bass or treble.
BEAT SOFT POP SCM OFF
VOL
(volume)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
SOUND ADJUSTMENTS
EN12-13.KD-S717[EE]2 00.12.19, 6:10 PM12

13
ENGLISH
• When “SCM LINK” is set to “LINK ON”, the
selected sound mode can be stored in memory
for the current source and the effect applies
only to the current source. Each time you
change the playback source, the SCM indicator
flashes on the display.
• When “SCM LINK” is set to “LINK OFF”, the
selected sound mode effect applies to any
source.
Indication For: Preset values
BAS TRE LOUD
BEAT Rock or disco +02 00 ON
music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
SCM OFF (Flat sound) 00 00 ON
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,”
Select the source.
The sound mode stored in memory for the
selected source is recalled.
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on the right column.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
page 12. (Your adjustments will be canceled if
another source is selected.)
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1 Call up the sound mode you want to
adjust.
• See the left column for details.
2 Select “BAS (Bass),” “TRE (Treble)”
or “LOUD (Loudness).”
3 Adjust the bass or treble level or
turn the loudness function ON/OFF.
• See page 12 for details.
4 Repeat steps 2 and 3 to adjust the
other items.
5 Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the selected
sound mode is stored in memory.
6 Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeatthe sameprocedure andreassign thepreset
values listed in the table on the left column.
EN12-13.KD-S717[EE]2 00.12.19, 6:10 PM13

14
ENGLISH
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 15.)
2 Select the PSM item you want to
adjust. (See page 15.)
3 Adjust the PSM item selected above.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the setting.
OTHER MAIN FUNCTIONS
12
Setting the clock
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 15.)
2 Set the hour.
1Select “CLOCK H” if not shown on the
display.
2Adjust the hour.
3 Set the minute.
1Select “CLOCK M.”
2Adjust the minute.
4 Finish the setting.
To check the current clock time while the
unit is turned off, press DISP (display).
The power turns on, the clock time is shown
for 5 seconds, then the power turns off.
12
EN14-16.KD-S717[EE]2 00.12.19, 6:13 PM14

15
ENGLISH
Preferred Setting Mode (PSM) items
LINK ON
See
page
Factory-
preset
settings
Select.
2
13
Set.
Hold.
Back
Back Advance
Advance
LINK ON
0:00 14
Clockwise
Counter-
clockwise
OFF
AUDIO 1
AUDIO 2
OFF
MUTING 1 MUTING 2
LINK OFF
OFF
15
AUDIO 2
15
CLOCK H Hour adjustment
CLOCK M Minute adjustment
SCM LINK Sound control
memory linkage
LEVEL Level display
TEL Telephone muting
• Press SEL (select) to finish the setting.
To cancel Advanced SCM – SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources)
• LINK OFF: Conventional SCM (one sound
mode for all sources)
To select the level meter – LEVEL
You can select the level display according to
your preference.
When shipped from the factory, “AUDIO 2” is
selected.
• AUDIO 1: Level meter illuminates from
bottom to top.
• AUDIO 2: Alternates level meter (moves from
bottom to top) and illumination
display.
• OFF: Erases the audio level indicator.
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
selecteither “MUTING1” or“MUTING 2,”whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• MUTING 1: Select this if this setting can mute
the sounds.
• MUTING 2: Select this if this setting can mute
the sounds.
• OFF: Cancels the telephone muting.
12,13,
15
EN14-16.KD-S717[EE]2 00.12.12, 10:22 AM15

16
ENGLISH
Detaching the control panel
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1 Unlock the control panel.
2 Pull the control panel out of the unit.
3 Put the detached control panel into
the provided case.
Attaching the control panel
1 Insert the left side of the control
panel into the groove on the panel
holder.
2 Press the right side of the control
panel to fix it to the panel holder.
Connectors
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
EN14-16.KD-S717[EE]2 00.11.23, 6:01 PM16

17
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Causes
CD is inserted upside down.
You are driving on rough roads.
The disc is scratched.
Connections are incorrect.
Connections are incorrect.
The volume is turned to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is inserted.
CD is locked.
The unit may function
incorrectly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Remedies
Insert the CD correctly.
Stop playing CD while driving
on rough roads.
Change the disc.
Checkthecordsandconnections.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Insert a CD correctly.
Unlock the CD (see page 11).
Press and hold both
and 0at the same time for
several seconds.
Be careful not to drop CD when
it is ejected.
Press and hold both SEL and
at the same time for
several seconds to reset the
unit. (The clock setting and
preset stations stored in
memory are erased.)
(See page 3.)
Symptoms
• CD cannot be played back.
• CD sound is sometimes
interrupted.
• Sound is sometimes
interrupted.
• Sound cannot be heard from
the speakers.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening to
the radio.
• “NO DISC” appears on the
display.
• CD cannot be ejected.
• CD can be neither played
back nor ejected.
• This unit does not work at all.
EN17-19.KD-S717[EE]2 00.12.19, 6:16 PM17

18
ENGLISH
MAINTENANCE
Handling CDs
This unit has been designed only to reproduce
the CDs bearing the following marks.
• Other discs cannot be played back.
How to handle CDs
When removing a CD
from its case, press
down the center holder
of the case and lift the
CD out, holding it by the
edges.
• Always hold the CD by the edges. Do not touch
its recording surface.
When storing a CD into its case, gently insert the
CD around the center holder (with the printed
surface facing up).
• Make sure to store CDs into the cases after
use.
To keep CDs clean
A dirty CD may not play
correctly. If a CD does
become dirty, wipe it with a
soft cloth in a straight line
from center to edge.
To play new CDs
New CDs may have some
rough spots around the
inner and outer edges. If
such a CD is used, this unit
may reject the CD.
To remove these rough
spots, rub the edges with a
pencil or ball-point pen, etc.
About mistracking:
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and the
CD, but will be annoying.
We recommend that you stop CD play while
COMPACT
DIGITAL AUDIO
Center holder
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the CD and leave
the unit turned on for a few hours until the
moisture evaporates.
When playing a CD-R (Recordable)
You can play back your original CD-Rs on this
receiver.
• Before playing back CD-Rs, read their
instructions or cautions carefully.
• Some CD-Rs recorded on CD recorders may
not be played back on this receiver because of
their disc characteristics, and of the following
reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the CD player is dirty.
• Use only “finalized” CD-Rs.
• CD-RWs (Rewritable) cannot be played back
on this receiver.
• Do not use CD-Rs with stickers or sticking
labels on the surface.They may cause
malfunctions.
CAUTIONS:
• Do not insert 8 cm CDs (single CDs) into the
loading slot. (Such CDs cannot be ejected.)
• Do not insert any CD of unusual shape — like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose CDs to direct sunlight or any heat
source or place them in a place subject to high
temperature and humidity. Do not leave them in
a car.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean CDs.
EN17-19.KD-S717[EE]2 00.11.23, 6:02 PM18

19
ENGLISH
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front: 40 W per channel
Rear: 40 W per channel
Continuous Power Output (RMS):
Front: 16 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Rear: 16 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Load Impedance: 4 Ω(4 Ωto 8 Ωallowance)
Tone Control Range:
Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩload (full scale)
Output Impedance: 1 kΩ
TUNER SECTION
Frequency Range:
FM1/FM2: 87.5 MHz to 108.0 MHz
FM3: 65 MHz to 74 MHz
AM: (MW) 522 kHz to 1620 kHz
(LW) 144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
CD PLAYER SECTION
Type: Compact disc player
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
GENERAL
PowerRequirement:
Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W ×H ×D):
Installation Size: 182mm×52mm ×150mm
Panel Size: 188 mm ×58 mm ×14 mm
Mass: 1.3 kg
(excluding accessories)
Design and specifications subject to change without
notice.
EN17-19.KD-S717[EE]2 01.1.10, 7:03 AM19

EN, RU 0101AOMCAPJES
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Затруднения при эксплуатации?
Пожалуйста, перезагрузите Ваше устройство
Для получения информации о перезагрузке Вашего
устройства обратитесь на соответствующую страницу
KD-S717 COVER [RUS] 18.10.00, 12:152