JVC AV29BF10EES User manual

ENGLISH - 1 -
Contents
Safety Precautions ................................................... 1
Remote Control Buttons .......................................... 2
Control Panel Buttons.............................................. 3
Antenna Connections ...............................................3
Preparation ................................................................4
Features .......................................................................... 4
Before Switching on your T .................................. 4
Power connection............................................................. 4
Aerial Connections ........................................................... 4
How to connect the external equipments .......................... 4
Inserting batteries in the remote control handset .............. 4
Switching the T ON/OFF ........................................4
o switch the V on .......................................................... 4
o switch the V off .......................................................... 4
Initial Settings ........................................................... 4
Operating with the onset buttons ...................................... 5
Operating with Remote Control ......................................... 5
Menu System ............................................................. 5
Sound Menu ..................................................................... 5
Picture Menu ................................................................... 6
Feature Menu ................................................................... 6
Installation Menu .............................................................. 7
Other Features .......................................................... 9
Sound Mute ..................................................................... 9
Stereo / Bilingual .............................................................. 9
Information on Screen ...................................................... 9
VCR / DVD Control Buttons and VCR / / DVD Switch 9
Teletext ...................................................................... 9
o operate eletext ........................................................... 9
o select a page of eletext ............................................. 10
o Select Index Page ......................................................10
Searching for a Channel while watching V .....................10
o Select Double Height ext ..........................................10
o Reveal concealed Information ...................................10
o Stop Automatic Page Change ..................................... 10
o Select a Subcode Page ..............................................10
o exit eletext ................................................................10
Fastext and optext ........................................................10
Connect the External Equipments ........................ 11
Via the Euroconnector.....................................................12
EX 2 S Mode .................................................................12
Via the RCA jacks ...........................................................12
Via the AN (aerial) socket .............................................. 12
V and Video Recoder (VCR) .......................................... 12
N SC Playback .............................................................. 12
Copy Facility ................................................................... 12
Connecting Headphones ................................................. 12
Tips ........................................................................... 12
Specifications .......................................................... 13
Safety Precautions
1. Power Source
he receiver should be operated only from a 220-240V AC,
50 Hz. outlet. Ensure you select the correct voltage setting
for your convenience.
2. Power Cord
he power supply cord should be placed so that they are not
likely to be walked on or pinched by items placed upon them
or against them. Pay particular attention to cord where they
enter the plug, power outlet, and the point where they exit
from the receiver.
3. Moisture and Water
Do not use this equipment in a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the washing
machine). Do not expose this equipment to rain or water and
do not place objects filled with liquids on it as this may be
dangerous.
4. Cleaning
Before cleaning, unplug the receiver from the main supply
outlet. Do not use liquid or aerosol cleaners. Use with soft
and dry cloth.
5. Ventilation
he slots and openings on the receiver are intended for venti-
lation and to ensure reliable operation. o prevent overheating,
these openings must not be blocked or covered in anyway.
6. Lightning
In case of storm and lightning or when going on holiday, dis-
connect the power cord from the wall outlet.
7. eplacement Part
When replacement parts are required, be sure the service
technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in fire,
electrical shock, or other hazards.
8. Servicing
Please refer all servicing to qualified personnel. Do not re-
move cover as this may result in electric shock.
9. Flame sources
Do not place naked flame sources on the apparatus.
10. Stand-By
Do not leave your V stand-by or operating condition when you
leave your house.
Warning!
Any intervention contrary to regulations, in particular, any
modification of high voltage or a replacement of the picture
tube may lead to an increased concentration of x-rays. Any
television modified in this way no longer complies with license
and must not be operated.
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should
principally be recycled. Packaging materials, such as foil
bag, must be kept away from children.

ENGLISH - 2 -
= Stand By / Power
0 - 9 = Direct Program
Colour Buttons
Standard Button
( ) = Programme Up (Cursor Up)
MENU = Menu Button
( ) = Cursor Right / Volume +
eletext / VCR /DVD Control Buttons
= VCR / / DVD Switch
= Stereo / Bilingual Button
= Information Button
( ) = Programme Down (Cursor Down)
( ) = Cursor Left / Volume -
AV = AV Button
= eletext Button
= Mute
Remote Control Buttons
:'6

(:(




4
%: 1)29
4

78%2(%6(
8:












 


CAUTION
RISK OF ELECTRIC SHOCK
he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock of persons.
he exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.

ENGLISH - 3 -
Control Panel Buttons
Antenna Connections

ENGLISH - 4 -
Preparation
Place V on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. o prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Features
 It is a remote controlled color television.
 100 programmes from VHF, UHF bands or cable channels
can be preset.
 It can tune cable channels.
 Controlling the V is very easy by its menu driven system.
 It has two Euroconnector sockets for external devices (such
as video recorder, video games, audio set, etc.)
 Front AV Input available.
 Stereo sound systems (German+Nicam) are available.
 Full function eletext (Fastext, optext).
 It is possible to connect headphone.
 Direct channel access.
 APS (Automatic Programming System).
 All programmes can be named.
 Forward or backward automatic tuning.
 Sleep timer.
 Child lock.
 Automatic sound mute when no transmission.
 5 minutes after the broadcasting (closedown), the V
switches itself automatically to stand-by mode.
Before Switching on your TV
Power connection
Impor an : he V set is designed to operate on 220-240 V
AC, 50 Hz.
 After unpacking, allow the V set to reach the ambient room
temperature before you connect the set to the mains.
Aerial Connections
 Connect the aerial plug to the aerial input socket located at
the back of the V.
How to connect the external equipments
See Connec he Ex ernal Equipmen s on page 11.
 See the instruction manuals provided with the external de-
vices too.
Inserting batteries in the remote control handset
 Remove the battery cover located on the back of the hand-
set by gently pulling upwards from the indicated part.
 Insert two AAA (R03) or equivalent type batteries inside.
 Replace the battery cover.
NOTE: Remove batteries from remote control handset when it is
not to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
Switching the TV ON OFF
You can operate your TV either using the remote control
handset or directly using the TV onset buttons.
To switch the TV on
Your V will switch on in two steps:
1- Press the power button located on the front of the V. hen
the V switches itself to standby mode and the RED LED
located below the V turns on.
2- o switch on the V from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
or,
Press Standby / Power Button or Programme Up and Down
buttons on the front of the V or on the remote control re-
spectively, so the V will switch on and the RED Led will turn
GREEN.
To switch the TV off
 Press the stand-by button on the remote control, so the V
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
 Press the power button located on the front of the V.
Initial Settings
he message "Please check an enna cable Au o. Pro-
gramming Sys em" will be displayed when you turn on your
V for the first time.
1- Select LANGUAGE with the   or   button, then
press the   or   button to select a menu language.
2- Select COUNTRY with the   or   button, then
press the   or   button to select the country you are
now located.
3- Select START with the   or   button, then press
the   button to start APS.
APS (Automatic Programming System) automatically pro-
grammes the received channels in your Vs programme
numbers. During APS, "A. P. S. IS RUNNING PLEASE
WAIT" will be displayed. After APS is finalized, the PRO-
GRAM. menu appears.
o cancel APS, press "STANDARD" button.
You can delete a channel, insert a channel into a programme
number, or re-start APS with the PROGRAM. menu.
For details, see PROGRAM. (Programming) Menu on
page 8.
4- Press the "STANDARD" button to complete the initial set-
tings.
After the initial settings are complete, you can change a pro-
gramme number or to name a programme number or to pro-
gramme new channel manually. For details, see
TUNING Menu on page 7.
If the message "Please check an enna cable Au o. Pro-
gramming Sys em" does not appear, follow the description
TV CONFIG. (configra ion) Menu on page 8 to select a
menu language and the country where you are now located,
then follow the description PROGRAM. (Programming)
Menu on page 8 to use AUTOSTORE.

ENGLISH - 5 -
Operating with the onset buttons
Volume setting and programme selection can be made using
the buttons on the front panel.
Volume Se ing
 Press -Volume button to decrease volume or Volume+
button to increase volume, so a volume level scale will be
displayed on the screen.
Programme Selec ing
 Press Programme Up button to select next programme
or Programme Down button to select the previous pro-
gramme.
En ering Main Menu
 Press MENU button to enter main menu. In the main
menu select submenu using Programme+ or Program-
me- button and enter the submenu using Volume+ or -
Volume button. o learn the usage of the menus, refer to
the Menu Sys em section of this manual.
Operating with emote Control
he remote control handset of your V is designed to control
all the functions of the model you selected. he functions will
be described in accordance with the menu system of your
V.
Functions which you can use out of menu system are de-
scribed below.
Volume Se ing
Press  button to increase volume.
Press   button to decrease volume.
Programme Selec ing
(Previous or nex programme)
 Press   button to select the previous programme.
 Press   button to select the next programme.
Programme Selec ing (direc access):
Press digit buttons on the remote control handset to select
programmes between 0 and 9. V will switch to the selected
program after a short delay.
When you press first digit, second digit will be displayed with
- symbol for 2 seconds. o select programmes between 10
and 99 press corresponding digit buttons consecutively be-
fore - symbol on the second digit disappears. (e.g. for pro-
gramme 27, first press 2 and then 7 while program number
displayed as 2- )
Menu System
Your V has been designed with a menu system. Display
MENU (main menu) and enter one of four menus (SOUND,
PICTURE, FEATURE and INSTALL).
1- Press MENU button to display MENU (main menu).
he menu tiltles will be displayed in the main menu.
2- Press   or   button to select a menu title, then
press   or   button to enter the menu.
 o exit a menu, press STANDARD button.
 o go to the previous menu, press MENU button.
 o display   menu that explains how to operate the
menu, press the   button while the menu which you
want to operate is displayed.
Sound Menu
To change sound settings
 Press MENU button, now you are in main menu. In the
main menu, select SOUND using   or   button,
then enter the sound menu pressing   or   button.
or,
 Enter the Sound Menu directly, pressing the RED button.
Setting olume:
As you enter the sound menu, Volume will be the first select-
ed option.
 Press   button to increase volume.
 Press   button to decrease volume.
Setting Bass Level:
 Using   or   button select Bass.
 Press   button to increase bass level.
 Press   button to decrease bass level.
Setting Treble Level:
 Using   or   button select reble.
 Press   button to increase treble level.
 Press   button to decrease treble level.

ENGLISH - 6 -
Setting Balance:
 Using   or   button select Balance.
 Press   button to change balance rightward.
 Press   button to change balance leftward.
Setting Effect:
You can use this feature to switch on and off sound effect.
Pressing   or   button will turn on and off this feature. If
the current sound system is MONO and the sound effect is
set ON, then the sound will be heard as if it is STEREO. If
the current sound system is STEREO, switching this effect
on will make the sound deeper. Switching it off will make no
change in MONO and STEREO.
Picture Menu
To change picture settings:
 Press MENU button, now you are in main menu. In the
main menu, select PICTURE using   or   button,
then enter the picture menu pressing   or   button.
or,
 Enter the Picture Menu directly, pressing the GREEN but-
ton.
Setting Brightness:
 As you enter the picture menu, BRIGH NESS will be the
first selected option.
 Press   button to increase BRIGH NESS.
 Press   button to decrease BRIGH NESS.
Setting Colour:
 Using   or   button select COLOUR.
 Press   button to increase COLOUR level.
 Press   button to decrease COLOUR level.
Setting Contrast:
 Using   or   button select CON RAS .
 Press   button to increase CON RAS level.
 Press   button to decrease CON RAS level.
Setting Sharpness:
 Using   or   button select SHARPNESS.
 Press   button to increase SHARPNESS level.
 Press   button to decrease SHARPNESS level.
Setting Hue (In A mode only) :
 Using   or   button select HUE.
 Press   button to increase HUE level.
 Press   button to decrease HUE level.
HUE adjust is functional only when N SC 3.58/4.43 is ap-
plied in AV mode. It has no effect when other color systems
used.
Picture Mode :
his option is used to change the picture size according to
the coming transmission.
 If auto function is selected, then the picture size will be au-
tomatically changed according to the transmission.
 Selecting 4 : 3 mode forces picture ratio size to 4 : 3.
 Selecting 16 : 9 mode forces picture ratio size to 16 : 9.
Every program has its own picture mode setting. When you
store the picture mode for a program other programs keep
their picture mode setting unaffected.
Feature Menu
 Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using   or   button.
hen enter the feature menu pressing   or   button.
or,

ENGLISH - 7 -
 Enter the Feature Menu directly, pressing the YELLOW
button.
Sleep Timer:
 As you enter the feature menu, Sleep imer will be the first
selected option.
 Use   or   button to change the value of the sleep timer
between Off, 0:15, 0:30, 0:45, 1:00, 1:15, 1:30, 1:45, 2:00
hours. Your V will get into standby mode when the period
you selected passes after you make the selection.
Child Lock:
In Feature Menu, press   or   button to select Child
Lock. Using   or   button turn Child Lock On or Off.
When Off is selected, there will be no difference in the opera-
tion of your V. When On is selected, the V can only be
controlled by the remote control handset. In this case, the
front panel buttons (except the Switch On/Off button) will not
work.
Installation Menu
his menu consists of uning, Program. (Programming) and
TV Config. (Configuration) sub-menus.
 Press MENU button, now you are in main menu. In the
main menu, select INSTALL. using   or   button,
then enter the Installation menu pressing   or   button.
or
 Enter the Installation Menu directly, pressing the BLUE but-
ton.
,167$//
781,1*
352*5$0
79&21),*
Tuning Menu
TUNING menu is used to programme a channel in a Vs
programme number manually or to modify the current pro-
gramme numbers settings.
 In the INSTALL menu, select TUNING. hen press   or  
button to enter the TUNING menu.
To programme a channel in a TVs programme
number manually:
1. Programme will be the first selected item as you enter the
TUNING menu. Pressing   or   button select the pro-
gramme number where you want to the tuned channel to
be stored. (You may also type the programme number us-
ing the digit buttons.)
2. Press   or   button to select Band. Using   or
 button to select the band in which you want to search a
channel.
3. Press   or  button to select Search.Press   or
 button to start searching. (Press   button to search
forward.Press   button to search backwards.)
If the found channel is not the desired one, press   or  
button to start searching again.
o stop searching before a channel is found, press the re-
verse direction button. For example, when the V is search-
ing forward with   button, press   button to stop searching.
If you know the channel number which you want to find, you
can find the channel directly.
Press   or   button to select Channel, then press
 or   button to select the channel number, or enter the
number with the digit buttons.
(Follow the step 5 to select the correct standard before you
select a channel number.)
4. If you want to name the new channel, press   or
 button to select Name.
Press   or   button to select the position and press  
or   button to select a letter.
5. If the sound or picture is abnormal, change the standard
(broadcasting system) of new channel.
Press   or   button to select Standard, then press
 or   button to change the correct one.
he indicated channel number will be changed when you
change the standard.
B/G : C02-C73 / S01-S41 / S75-S79
D/K : C01-C69 / S01-S41
K1 : C04-C09
6. If the channel reception is poor, fine-tune the channel.
Press   or   button to select Fine uning,then
press   or   to fine-tune the channel.
7. After the all settings are completed, store the new
channels setting to the programme number which you se-
lected. Press   or   button to select Store, then
press   or   to store it.
If you want to modify the current programme numbers
setting (for e ample, changing name, etc.) :
1. Select the programme number you want to modify the
settings while no menu appears.
2. Display the uning menu.
3. Follow  o programme a channel in a Vs programme
number manually: section and change the settings of
the current programme number.
Note:
Do not use Program item in the Tuning menu to select the
programme number. f you select the programme number
with Program item and store the settings, the selected pro-
gramme numbers current settings are cancelled.

ENGLISH - 8 -
Program. (Programming) Menu
Program. (Programming) menu is used to display the pro-
gramme names and numbers. You can use this menu to de-
lete a channel, to insert a channel and to autostore the pro-
grammes.
Select the PROGRAM. menu pressing   or   but-
ton and open it pressing   or   button. When you enter the
programme menu, all the programme numbers and names
will be displayed on the screen. he programme number and
name of the tuned channel will be shown by the red colour.
All the other channel numbers will be black and at first the
programme number 01 will be flashing. You can move the
flashing number using   or   or   or   button. As
you pass through the programme numbers this way, to reach
the programme number you want, the channels correspond-
ing to the programme numbers you pass through will not be
tuned.
Pressing the RED button will tune the channel on the flashing
programme number. Now the colour of the flashing program-
me number will be red. Again you can use   or   or
 or   button to move the flashing number.
352*5$0
$5'  
=')  
:5  
6$7  
57/  
57/  
352  
%5  
70  
   
6(/(&7 '(/(7(
,16(57 $8726725(
To delete a channel from a programme number:
 Move the flashing onto the channel you want to delete.
 Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
To insert a channel into a programme number:
 Move the flashing onto the selected channel.
 Press the RED button, so that channel will be displayed on
the screen.
 Move the flashing onto the selected programme number.
Now pressing the GREEN button will insert the channel on
screen displayed into that programme number. If a channel
is moved to a lower programme number, channels between
the previous and current position of the selected channel will
be moved one programme number up and if a channel is
moved to a upper programme number, channels between
the previous and current position of the selected channel
will be moved one programme number down.
AUTOSTORE
If you enter the AUTOSTORE menu, you can automatically
programme the received channels in your Vs programmes
with APS ( Automatic programme system ).
1. After displaying the PROGRAM. menu, press the BLUE
button to enter the AUTOSTORE menu. he message
ALL PRESTORED PROGRAMMES WILL BE ERASED 
will appears.
2. If you want to start programming, press   button. he
message  A.P.S. IS RUNNING PLEASE WAIT  appears
and APS automatically programmes the received channels
in your Vs programme numbers. Afrer APS is finalized,
the PROGRAM. menu appears again.
o cancel APS, press STANDARD button.
T Config. (Configration) Menu
his menu is used to select the Menu language, the Country
where you are now located and to select the source of EXT 2
OUTPUT.
 In the Installation menu, Press   or   button to se-
lect TV Config. hen press   or   button to enter the
TV Config. menu.
Selecting Menu Language
 In the TV Config. menu select Language and change the
language to the one you desire, using   or   button. As
soon as you change the language, the menu items will be
displayed in the selected language.
Selecting Country
 In the TV Config. menu select Coun ry using   or
 button. Change the country pressing   or   button.
Setting E ternal Source Output
 You can use this menu to select the internal or external
source that will be output at EXT 2 terminal.
 In the TV Config. menu select EXT 2 OUTPUT using
 or   button. hen select the source you want to
be output at EXT 2 pressing   or   button (one of the
sources: TV, EXT 1 or F AV (Fron AV).

ENGLISH - 9 -
Other Features
Sound Mute
o cut off the sound of the V press   button. he sound
will be cut off. o cancel mute, press   or   or   but-
ton. he volume level will be the same as the level before
mute if you cancel mute pressing   button again.
Stereo / Bilingual
 If the V channel you are watching broadcasts in two lan-
guages (e.g. Eurosport), you can select the dubbed or the
original language, pressing the   button.
 When the stereo broadcast is received poorly, you can
change from stereo to mono sound so that you can hear the
broadcast more clearly and easily.
Information on Screen
First pressing the   button displays the current status
Programme number, S a ion name and Sound s a-
us.
Pressing this button again displays the current time.
Pressing this button once more remove the on-screen dis-
play.
To Display the Time
 While watching a V programme with eletext transmission
press   button twice. he current time information, cap-
tured from eletext will be displayed at the upper right cor-
ner of the screen.
 If the programme being watched does not have eletext
transmission, only a blue box will be displayed at the same
location.
 he time information will disappear after pressing   but-
ton again.
Standard
You can re-set the current PICTURE menu settings (except
Picture Mode setting) to the default settings.
 Press STANDARD button when no menu appears.
VC / DVD Control Buttons and VC / / DVD
Switch
he buttons can be used to operate a JVC brand VCR or
DVD player. Pressing the button having the same appearance
as the original remote control button of a device makes the
function work in the same way as the original remote control.
1. Set the VCR / / DVD Switch to the VCR or DVD posi-
tion.
VCR:
When you are operating the VCR, set the switch to the VCR
position.
DVD:
When you are operating the DVD player, set the switch to the
DVD position.
(Tex ):
When you are viewing eletext programmes, set the switch to
the ( ext) position.
2. Press the VCR / DVD Control Button to control your VCR
or DVD player.
No e:
 If your device is not made by JVC, these buttons cannot be
used.
 Even if your device is made by JVC, some of these buttons
or any one of the buttons may not work, depending on the
device.
 You can use the / buttons to choose a V channel
which the VCR will receive or choose the chapter which the
DVD player plays back.
 Some DVD player models use the / buttons for operat-
ing of Fast forward/backward functions and choosing the
chapter. In this case, the / the buttons do not
work.
Teletext
eletext is an information system that displays text on your
V screen. Using the eletext information system you can
view a page of information on a subject that is available in the
list of contents (index).
No on screen display will be available in text mode.
No contrast, brightness or colour control, but volume control
is available in text mode.
To operate Teletext
 Select a V station on which eletext is being transmitted.
 Press ( ELE EX )   button. Usually the list of contents
(index) is displayed on the screen.
 Set the VCR / / DVD switch to the ( ext) position.

ENGLISH - 10 -
To select a page of Teletext
 Press the appropriate digit buttons for the required eletext
page number.
he selected page number is displayed at the top left corner
of the screen. he eletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
 Press   button to move the eletext screen forward
one page at a time.
 Press   button to move the eletext screen backward
one page at a time.
To Select Index Page
 o select the page number of the index (generally page
100), press   button.
Searching for a Channel while watching TV
 In the eletext mode pressing   button will switch the
screen to the V mode. In the V mode enter a page num-
ber using digit keys. As you enter last digit of page number,
 sign will replace the page number and flash until the
entered page number is found. hen the page number will
replace   sign again. Now you can display this teletext
page pressing   button.
To Select Double Height Text
 Press   button for the top half of the information page to
be displayed in double height text.
 Press   button again for the bottom half of the informa-
tion page to be displayed in double height text.
 Press   button once more for the full page of normal
height text.
To eveal concealed Information
 Pressing   button once will reveal answers on a quiz or
games page.
 Pressing   button again will conceal the revealed an-
swers.
To Stop Automatic Page Change
he teletext page you have selected may contain more infor-
mation than what is on the screen; the rest of the information
will be displayed after a period of time.
 Press   button to stop the automatic page change.
 Press   button again to allow the next page to be dis-
played.
To Select a Subcode Page
Subcode pages are subsections of long eletext pages that
can only be displayed on the screen one section at a time.
 Select the required eletext page.
 Press   button.
 Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
 If the selected subcode page is not displayed in a short
time, press   button. V programme will be displayed on
the screen.
 eletext page number will be displayed on the upper left cor-
ner of the screen when the selected page is found.
 Press   button to display the selected eletext page.
To exit Teletext
 Press   button. he screen will switch to V mode.
Fastext and Toptext
eletext mode will be selected according to transmission au-
tomatically.
Your C V supports the 8 page eletext system. When the
page number of any of the 8 pages in memory is entered, the
system will not search for the requested page; instead it will
display the page automatically.
 Press   button to move the eletext screen forward
one page at a time.
 Press   button to move the eletext screen backward
one page at a time.
For Fastext and Toptext
he subject-heading for the information may have a particular
colour or can be in a form located in a coloured box.
 Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
For TOPTEXT
If optext transmission is present, colour coded buttons will
appear in status row.
If optext transmission is not present, status row will not ap-
pear.
In optext mode the   or   commands will request
the next or previous page respectively. If optext transmission
is not available, in case of operation of these commands,
wraparound occurs. For example page 100 appears to be one
greater than page 199.

ENGLISH - 11 -
Connect the External Equipments
Before connecting anything
 Switch off all equipments including the V.
 Read the manuals provided with the equipments.
To selec an AV mode
Pressing AV button on the remote control selects one of AV modes (EXT 1, EXT 2, EXT 2 S and F AV).
 o return to the TV mode, repeatedly press AV button.
EXT 1 erminal: Euroconnector (21-pin, SCAR )
 Video input, Audio L/R inputs and RGB inputs are available.
 V broadcast outputs (Video and Audio L/R) are available.
EXT 2 erminal: Euroconnector (21-pin, SCAR )
 Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
 Video and Audio L/R outputs are available. (see Se ing Ex ernal Source Ou pu  on page 8.)
F AV (Fron AV) erminal: RCA connectors x 3
 Video input and Audio L/R inputs are available.
29 FRONT AV

ENGLISH - 12 -
Via the Euroconnector
Your V set has two Euroconnector sockets. If you want to
connect equipments (e.g. video recorder, decoder, etc.) which
have Euroconnectors, to your V, use the EXT 1 or EXT 2
terminals.
EXT 2 S Mode
If the equipment connected to your V set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT 2 S mode and connecting your
equipment to the EXT 2 terminal of V. See your equipment's
booklet to check if your equipment has such feature.
Via the CA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the F AV (Fron AV) terminal
with the video and audio cables.
 If the epuipment has the mono audio jack, connect it to the
AUDIO-L jack.
Via the ANT (aerial) socket
If your equipment does not have a Euroconnecter or RCA
jacks, connect it to the V with an aerial cable. For details,
see the manual provided with the equipment.
 o store the test signal that comes from the epuipment, see
TUNING Menu on page 7 and store it to the programme
number 0 or between 55 and 99. You can watch images
from that equipment to select the programme number which
you stored the test signal.
TV and Video ecoder (VC )
 Connect the Video Recorder to the AN (antenna input)
socket of the V with the aerial cable.
 Connect the Video Recorder to the EXT 1 or EXT 2 terminal
with the SCAR cable, or connect it to the F AV terminal
with the audio and video cables.
NTSC Playback
Connect a N SC video recorder to a terminal. hen press
AV button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.
Copy Facility
You can output the video and audio signals which inputs from
TV, EXT 1 or F AV (Fron -AV) terminal to the video recorder
connected to the EXT 2 terminal.
 o select the output source, see Se ing Ex ernal Source
Ou pu  on page 8.
Connecting Headphones
Use the stereo headphone socket of your V, to connect
headphones.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not use
abrasive solvents as they may damage the V screen coating
layer.
Poor Picture:
Have you selected the correct V system? Is your V set or
house aerial located too close to the loudspeakers, non-
earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures or
ghost images. Sometimes you can improve the picture quali-
ty by changing the direction of the aerial.
he picture quality may degrade when two peripherals are
connected to the V at the same time. In such a case, dis-
connect one of the peripherals.
No Picture:
Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
No Pic ure means that your V is not receiving any trans-
mission. Have you pressed the correct keys on the remote
control? ry once more.
Sound:
Sound is coming from only one of the speakers. Is the bal-
ance set to one direction extreme? See SOUND menu.
emote Control:
Your V no longer responds to the remote control. Press the
STANDARD button on the remote control once more. Per-
haps the batteries are exhausted. If so you can still use the
local buttons at the front of your V.
Have you selected the wrong menu? Press STANDARD but-
ton to return to V mode or press MENU button to return to
the previous menu.
No solution:
Switch your V set off and on. If this does not work, call the
service personnel; never attempt to repair it yourself.

ENGLISH - 13 -
Specifications
V BROADCAS ING .................................. PAL SECAM B/G D/K K1
RECEIVING CHANNELS ............................. VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
CABLE V (B/G : S01-S41 / S75-S79 ; D/K: S01-S41)
NUMBER OF PRESE CHANNELS ........... 100
CHANNEL INDICA OR ................................ On Screen Display
RF AERIAL INPU ...................................... 75 Ohm (unbalanced)
OPERA ING VOL AGE .............................. 220-240V AC, 50 Hz.
SOUND-MUL IPLEX SYS EMS .................. Nicam + German Stereo
PIC URE UBE .......................................... For 29
AUDIO OU PU POWER
(WRMS.) (%10 HD) .......................... 2 x 12
POWER CONSUMP ION (W) (max.) .......... 150
DIMENSIONS (mm) AV29BF10EES
D................................................................. 493
L ................................................................. 784
H................................................................. 582
Weight (Kg.) ................................................ 46,2

POLSKI - 14 -
Spis treci
rodki ostro¿noci .................................................14
Przyciski pilota ........................................................15
Przyciski panelu sterowania ..................................16
Antena ......................................................................16
Przygotowanie.........................................................17
Charakterystyka odbiornika .............................................17
Zani w³¹czysz telewizor .......................................17
Pod³¹czanie zasilania .....................................................17
Pod³¹czanie anteny do telewizora ...................................17
Pod³¹czanie urz¹dzeñ zewnêtrznych ..............................17
Wk³adanie baterii do ilota ..............................................17
W³¹czanie i wy³¹czanie telewizora ........................17
W³¹czanie telewizora ......................................................17
Wy³¹czanie telewizora ....................................................17
Ustawienia pocz¹tkowe ..........................................17
Obs³uga za omoc¹ rzycisków anelu sterowania .........18
Obs³uga za omoc¹ ilota ...............................................18
Syste enu ........................................................... 18
Menu Dwiêk ..................................................................18
Menu Obraz ....................................................................19
Menu Wy osa¿enie ........................................................20
Menu Instalacja ...............................................................20
Inne funkcje .............................................................22
Wy³¹czanie dwiêku .......................................................22
Stereo / Dwujêzyczny .....................................................22
Informacje na ekranie ......................................................22
Przyciski obs³ugi VCR / DVD i rze³¹cznik
VCR / / DVD ..............................................................23
Teletekst .................................................................. 23
Obs³uga teletekstu ..........................................................23
Wybór strony teletekstu ..................................................23
Wybór strony indeksowej ................................................24
Wyszukiwanie kana³u odczas ogl¹dania telewizji ..........24
Wybór tekstu o odwójnej wysokoci..............................24
Wywietlanie ukrytych informacji ....................................24
Wy³¹czanie automatycznego rzewijania stron ...............24
Wybór strony subkodu ....................................................24
Wyjcie z teletekstu ....................................................... 24
Fastext i To text .............................................................24
Pod³¹czanie urz¹dzeñ zewnêtrznych ................... 25
Euroz³¹cze ......................................................................26
Tryb EXT 2 S ................................................................... 26
Gniazda RCA ..................................................................26
Gniazdo ANT (antena) .....................................................26
Telewizor i magnetowid ...................................................26
Odtwarzanie w systemie NTSC .......................................26
Ko iowanie .....................................................................26
Pod³¹czanie s³uchawek ...................................................26
Wskazówki ...............................................................26
Dane techniczne .....................................................27
rodki ostro¿noci
1. ród³o zasilania
Odbiornik owinien byæ zasilany tylko r¹dem zmiennym o
napiêciu 220-240 V i czêstotliwoci 50 Hz.. Nale¿y
amiêtaæ o wyborze gniazda sieciowego o od owiednim
na iêciu.
2. Przewód zasilania
Przewód zasilania nale¿y u³o¿yæ tak, aby nie mo¿na by³o o
nim chodziæ oraz ¿eby nie uleg³ uszkodzeniu rzez
rzedmioty ustawione na nim lub obok niego. Nale¿y
zwracaæ szczególn¹ uwagê na wejcie rzewodu do wtyczki,
od³¹czenie do gniazda sieciowego oraz wyjcie rzewodu z
odbiornika.
3. Wilgoæ i woda
Nie u¿ywaj odbiornika w wilgotnych lub mokrych miejscach
(nie ustawiaj telewizora w ³azience, blisko zlewu w kuchni lub
obok ralki). Nie wystawiaj odbiornika na dzia³anie deszczu
lub wody i nie umieszczaj na nim ¿adnych rzedmiotów
wy e³nionych cieczami, oniewa¿ mo¿e to byæ
niebez ieczne.
4. Czyszczenie
Przed czyszczeniem wyjmij wtyczkê odbiornika z gniazda
sieciowego. Nie u¿ywaj rodków czyszcz¹cych w ³ynie lub
w aerozolu. U¿ywaj suchej i miêkkiej szmatki.
5. Wentylacja
Szczeliny i otwory w obudowie odbiornika s³u¿¹ do wentylacji
i za ewniaj¹ o rawne dzia³anie urz¹dzenia. Aby za obiec
rzegrzaniu, nie wolno w ¿aden s osób blokowaæ ani
zakrywaæ otworów w obudowie.
6. Wy³adowania at osferyczne
W rzy adku burzy i wy³adowañ atmosferycznych lub
wyjazdu na d³u¿szy czas nale¿y wy³¹czyæ rzewód zasilania
z gniazda sieciowego.
7. Czêci za ienne
Jeli zachodzi otrzeba wymiany czêci, do ilnuj, aby
racownik serwisu u¿y³ czêci zamiennych okrelonych
rzez roducenta lub osiadaj¹cych takie same arametry
jak czêci oryginalne. U¿ycie innych czêci mo¿e
s owodowaæ o¿ar, ora¿enie r¹dem lub inne zagro¿enia.
8. Serwis
Wszelkie na rawy i czynnoci konserwacyjne nale¿y zlecaæ
wykwalifikowanym racownikom serwisu. Nie zdejmuj
okrywy, oniewa¿ grozi to ora¿eniem r¹dem.
9. ród³a ognia
Nie umieszczaj ods³oniêtych róde³ ognia na odbiorniku.
10. Tryb oczekiwania
Nie ozostawiaj telewizora w³¹czonego lub w trybie oczekiwania,
kiedy wychodzisz z domu.
Ostrze¿enie!
Wszelkie ingerencje sprzeczne z przepisami, a w
szczególnoci jakakolwiek zmiana wysokiego napiêcia lub
wymiana kineskopu mog¹ prowadziæ do zwiêkszenia
natê¿enia promieni X Odbiornik telewizyjny zmodyfikowany
w ten sposób jest niezgodny ze specyfikacjami producenta i
nie mo¿e byæ u¿ytkowany
Wskazówki odnonie utylizacji odpadów:
O akowanie i materia³y omocnicze s¹ surowcem wtórnym i
owinny byæ oddane recyklingowi. Materia³y o akowaniowe,
n . worek foliowy, owinny byæ rzechowywane z dala od
dzieci.

POLSKI - 15 -
= Tryb oczekiwania / Zasilanie
0 - 9 = Przyciski numeryczne
Prz ciski kolorowe
Przycisk Standard
( ) = Nastê ny rogram (Kursor w górê)
MENU = Przycisk Menu
( ) = Kursor w rawo / G³onoæ +
Teletekst / Przyciski obs³ugi VCR / DVD
= Prze³¹cznik VCR / / DVD
= Przycisk Stereo / Na isy dwujêzyczne
= Przycisk informacyjny
( ) = Po rzedni rogram (Kursor w dó³)
( ) = Kursor w lewo / G³onoæ -
AV = Przycisk AV
= Przycisk teletekstu
= Wy³¹cznik dwiêku
Przyciski pilota
:'6

(:(




4
%: 1)29
4

78%2(%6(
8:












 


UWAGA
RYZYKO PORA¯ENIA PR¥DEM
Symbol ioruna ze strza³k¹ w równobocznym trójk¹cie ostrzega u¿ytkownika rzed obecnoci¹ w obudowie
odbiornika nie izolowanych czêci od niebez iecznym na iêciem, którego wielkoæ mo¿e byæ wystarczaj¹ca, aby
s owodowaæ ora¿enie r¹dem.
Wykrzyknik w równobocznym trójk¹cie rzy omina o wa¿nych wskazówkach na temat obs³ugi i konserwacji
(serwisu) zawartych w instrukcji do³¹czonej do odbiornika.

POLSKI - 16 -
Przyciski panelu sterowania
Antena

POLSKI - 17 -
Przygotowanie
Ustaw telewizor na stabilnej owierzchni.
Aby za ewniæ od owiedni¹ wentylacjê, ozostaw co najmniej
10 cm wolnej rzestrzeni wokó³ telewizora. Nie wolno
ustawiaæ ¿adnych rzedmiotów na obudowie, aby unikn¹æ
zagro¿eñ i wadliwego dzia³ania telewizora.
Charakterystyka odbiornika
 Kolorowy odbiornik TV obs³ugiwany za omoc¹ ilota.
 Mo¿liwoæ za rogramowania 100 rogramów z asm VHF,
UHF lub kana³ów kablowych.
 Mo¿liwoæ strojenia kana³ów telewizji kablowej.
 £atwa obs³uga dziêki systemowi menu.
 Dwa gniazda na euroz³¹cza do od³¹czenia urz¹dzeñ
zewnêtrznych (n . magnetowidu, gier wideo, zestawu audio
it .).
 Przednie gniazda AV.
 Systemy dwiêku stereo (niemiecki+NICAM).
 Pe³na obs³uga teletekstu (Fastext, To text).
 Mo¿liwoæ od³¹czenia s³uchawek.
 Bez oredni dostê do kana³ów.
 APS (System Automatycznego Programowania).
 Mo¿liwoæ nadania nazw wszystkim rogramom.
 Automatyczne strojenie w górê i w dó³ asma czêstotliwoci.
 Wy³¹cznik czasowy.
 Blokada rzed dzieæmi
 Automatyczne wy³¹czanie dwiêku rzy braku transmisji.
 Automatyczne rzejcie w tryb oczekiwania 5 minut o
zakoñczeniu transmisji.
Zanim w³ czysz telewizor
Pod³¹czanie zasilania
UWAGA: Telewizor rzeznaczony jest do zasilania r¹dem
zmiennym o napiêciu 220-240 V i czêstotliwoci 50 Hz.
 Po roz akowaniu ozostaw odbiornik na chwilê, aby
osi¹gn¹³ tem eraturê otoczenia, zanim od³¹czysz go do
sieci.
Pod³¹czanie anteny do telewizora
 W³¹cz wtyczkê anteny do wejciowego gniazda
antenowego znajduj¹cego siê z ty³u telewizora.
Pod³¹czanie urz¹dzeñ zewnêtrznych
Zobacz unkt Pod³¹czanie urz¹dzeñ zewnêtrzn ch na
stronie 25.
 Za oznaj siê równie¿ z instrukcjami do³¹czonymi do
urz¹dzeñ zewnêtrznych.
Wk³adanie baterii do pilota
 Zdejmij okrywê komory baterii z ty³u ilota, delikatnie
oci¹gaj¹c j¹ do góry we wskazanym miejscu.
 W³ó¿ dwie baterie AAA (R03) lub ich od owiedniki.
 Za³ó¿ z owrotem okrywê.
UWAGA: Jeli ilot nie jest u¿ywany rzez d³u¿szy czas, baterie
nale¿y wyj¹æ z komory. W rzeciwnym wy adku mo¿e dojæ do
uszkodzenia ilota z owodu wycieku elektrolitu z baterii.
W³ czanie i wy³ czanie telewizora
Telewizor mo¿na obs³ugiwa za pomoc¹ pilota lub
bezporednio przy u¿yciu przycisków na obudowie
odbiornika.
W³¹czanie telewizora
Aby w³¹czyæ telewizor, nale¿y wykonaæ dwie czynnoci:
1- Nacinij wy³¹cznik zasilania znajduj¹cy siê z rzodu
telewizora. Odbiornik rzejdzie w tryb oczekiwania i
zawieci siê czerwona lampka u do³u telewizora.
2- Aby w³¹czyæ odbiornik znajduj¹cy siê w trybie
oczekiwania:
Nacinij rzycisk numeryczny na ilocie, ¿eby wybraæ numer
rogramu;
lub,
Nacinij rzycisk trybu oczekiwania / wy³¹cznik zasilania z
rzodu telewizora lub rzycisk Nastê ny rogram albo
Po rzedni rogram na ilocie, ¿eby w³¹czyæ telewizor;
czerwona lam ka zacznie siê wieciæ na zielono.
Wy³¹czanie telewizora
 Nacinij rzycisk trybu oczekiwania na ilocie, ¿eby
w³¹czyæ tryb oczekiwania; zielona lampka zacznie siê
wieciæ na czerwono; lub
 Nacinij wy³¹cznik zasilania z rzodu telewizora.
Ustawienia pocz tkowe
Po ierwszym w³¹czeniu telewizora na ekranie ojawi siê
komunikat Please check antenna cable Auto.
Programming S stem (SPRAWD WEJCIE ANTENOWE
AUTOZACHOWANIE).
1- Wybierz o cjê LANGUAGE (JÊZYK) za omoc¹ rzycisku
 lub  , a nastê nie nacinij rzycisk   lub  ,
aby wybraæ jêzyk menu.
2- Wybierz o cjê COUNTRY (KRAJ) za omoc¹ rzycisku
 lub  , a nastê nie nacinij rzycisk   lub  ,
aby wybraæ swój kraj.
3- Wybierz o cjê START (START) za omoc¹ rzycisku
 lub  , a nastê nie nacinij rzycisk  , aby
w³¹czyæ APS.
APS (System Automatycznego Programowania)
automatycznie zachowuje kana³y odbierane rzez telewizor
od od owiednimi numerami rogramów. W czasie dzia³ania
APS wywietlany jest komunikat A.P.S. SZUKA
PROGRAMÓW PROSZÊ CZEKAÆ. Po zakoñczeniu
dzia³ania APS ojawi siê menu SPIS PROGRAMÓW.
Aby wy³¹czyæ APS, nacinij rzycisk STANDARD.

POLSKI - 18 -
Mo¿esz usun¹æ lub wstawiæ kana³ od numer rogramu albo
onownie w³¹czyæ APS za omoc¹ menu SPIS
PROGRAMÓW.
Szczegó³owe informacje znajdziesz w unkcie Menu SPIS
PROGRAMÓW na stronie 21.
4- Nacinij rzycisk STANDARD, aby zachowaæ ustawienia
ocz¹tkowe.
Po w rowadzeniu ustawieñ ocz¹tkowych mo¿esz
manualnie zmieniæ numer rogramu, nadaæ mu nazwê albo
za rogramowaæ nowy kana³. Szczegó³owe informacje znajdz-
iesz w unkcie Menu STROJENIE na stronie 20.
Jeli komunikat Please check antenna cable Auto.
Programming S stem (SPRAWD WEJCIE ANTENOWE
AUTOZACHOWANIE) nie ojawi siê na ekranie, wykonaj
czynnoci o isane w unkcie Menu KONFIGURACJA na
stronie 22, aby wybraæ jêzyk menu i swój kraj, a nastê nie
wykonaj wskazówki odane w unkcie Menu SPIS
PROGRAMÓW na stronie 21, aby u¿yæ funkcji
AUTOZACHOWA..
Obs³uga za po oc¹ przycisków panelu
sterowania
Za omoc¹ rzycisków na rzednim anelu telewizora mo¿na
regulowaæ g³onoæ i wybieraæ rogramy.
Regulacja g³onoci
 Nacinij rzycisk -G³onoæ, aby zmniejszyæ g³onoæ,
lub rzycisk G³onoæ+, aby zwiêkszyæ g³onoæ. Po
naciniêciu jednego z tych rzycisków na ekranie
wywietlana jest skala g³onoci.
W bór programu
 Nacinij rzycisk Program+, aby wybraæ nastê ny
rogram, lub rzycisk Program-, aby wybraæ o rzedni
rogram.
Wejcie do g³ównego menu
 Nacinij rzycisk MENU, aby wejæ do g³ównego menu.
W g³ównym menu wybierz odmenu rzyciskiem
Program+ lub Program- i wejd do odmenu u¿ywaj¹c
rzycisku G³onoæ+ lub -G³onoæ. Aby nauczyæ siê
korzystaæ z menu, za oznaj siê z unktem S stem menu
niniejszej instrukcji.
Obs³uga za po oc¹ pilota
Pilot do³¹czony do telewizora s³u¿y do obs³ugi wszystkich
funkcji danego modelu. Funkcje o isane s¹ w instrukcji
zgodnie z systemem menu telewizora.
Funkcje, które mo¿na obs³ugiwaæ nie korzystaj¹c z systemu
menu, o isane s¹ oni¿ej.
Regulacja g³onoci
Nacinij rzycisk , aby zwiêkszyæ g³onoæ.
Nacinij rzycisk  , aby zmniejszyæ g³onoæ.
W bór programu
(poprzedni lub nastêpn program)
 Nacinij rzycisk  , aby wybraæ o rzedni rogram.
 Nacinij rzycisk  , aby wybraæ nastê ny rogram.
W bór programu (bezporedni):
Nacinij rzycisk numeryczny na ilocie, aby wybraæ jeden z
rogramów od 0 do 9. Po chwili na ekranie ojawi siê
wybrany rogram.
Po naciniêciu ierwszego rzycisku numerycznego w
miejscu drugiej cyfry na dwie sekundy ojawi siê symbol -.
Aby wybraæ rogram o numerze od 10 do 99, nacinij kolejno
od owiednie rzyciski numeryczne, zanim zniknie symbol
- (n . aby wybraæ rogram 27, naj ierw nacinij 2, a nas-
tê nie 7, gdy wywietlany numer rogramu ma ostaæ 2-).
System menu
Telewizor wy osa¿ony jest w system menu. Wywietl
MENU (g³ówne menu) i wejd do jednego z czterech menu
DWIÊK, OBRAZ, WYPOSA¯ENIE i INSTALACJA.
1- Nacinij rzycisk MENU, aby wywietliæ MENU
(g³ówne menu). W g³ównym menu wywietlone zostan¹
nazwy oszczególnych menu.
2- Nacinij rzycisk   lub  , aby wybraæ nazwê
menu, a nastê nie nacinij rzycisk   lub  , aby wejæ
do danego menu.
 Aby wyjæ z menu, nacinij rzycisk STANDARD.
 Aby rzejæ do o rzedniego menu, nacinij rzycisk
MENU.
 Aby wywietliæ menu   wyjaniaj¹ce obs³ugê danego
menu, nacinij rzycisk  , gdy wywietlane jest menu,
które chcesz obs³ugiwaæ.
Menu Dwiêk
Z iana ustawieñ dwiêku
 Nacinij rzycisk MENU, aby wywietliæ g³ówne menu. W
g³ównym menu wybierz DWIÊK za omoc¹ rzycisku
 lub  , a nastê nie wejd do menu Dwiêk,
naciskaj¹c rzycisk   lub  ;
lub,
 Wejd do menu Dwiêk bez orednio, naciskaj¹c
czerwon rzycisk.
Regulacja Si³a G³osu:
Po wejciu do menu dwiêku ierwsz¹ odwietlon¹ o cj¹
jest Si³a G³osu.
 Nacinij rzycisk  , aby zwiêkszyæ si³a g³osu.
 Nacinij rzycisk  , aby zmniejszyæ si³a g³osu.

POLSKI - 19 -
Ustawianie pozio u tonów niskich:
 Za omoc¹ rzycisku   lub   wybierz o cjê
NISKIE TONY.
 Nacinij rzycisk  , aby zwiêkszyæ oziom NISKIE TONY.
 Nacinij rzycisk  , aby zmniejszyæ oziom NISKIE
TONY.
Ustawianie pozio u tonów wysokich:
 Za omoc¹ rzycisku   lub   wybierz o cjê
WYSOKIE TONY.
 Nacinij rzycisk  , aby zwiêkszyæ oziom WYSOKIE
TONY.
 Nacinij rzycisk  , aby zmniejszyæ oziom WYSOKIE
TONY.
Ustawianie równowagi g³oników:
 Za omoc¹ rzycisku   lub   wybierz o cjê
BALANS.
 Nacinij rzycisk  , aby zmieniæ równowagê w rawo.
 Nacinij rzycisk  , aby zmieniæ równowagê w lewo.
Ustawianie funkcji EFEKTY DWIÊKOWE:
Mo¿esz u¿yæ tej funkcji do w³¹czania i wy³¹czania efektu
dwiêkowego. Naciniêcie rzycisku   lub   w³¹cza i
wy³¹cza tê funkcjê. Jeli system dwiêku ustawiony jest na
mono i efekt dwiêkowy jest ustawiony na ZA£, dwiêk
bêdzie s³yszany jak dwiêk stereo. Jeli system dwiêku
ustawiony jest na stereo, w³¹czenie efektu dwiêkowego
nada dwiêkowi wiêksz¹ g³êbiê. Wy³¹czenie efektu
dwiêkowego nie owoduje zmiany ustawienia systemu
dwiêku z mono na stereo lub odwrotnie.
Menu Obraz
Z iana ustawieñ obrazu:
 Nacinij rzycisk MENU, aby wywietliæ g³ówne menu. W
g³ównym menu wybierz OBRAZ za omoc¹ rzycisku
 lub  , a nastê nie wejd do menu Obraz,
naciskaj¹c rzycisk   lub  ;
lub,
 Wejd bez orednio do menu Obraz, naciskaj¹c zielon
rzycisk.
Ustawianie jasnoci:
 Po wejciu do menu obrazu ierwsz¹ odwietlon¹ o cj¹
jest JASNOÆ.
 Nacinij rzycisk  , aby zwiêkszyæ jasnoæ.
 Nacinij rzycisk  , aby zmniejszyæ jasnoæ.
Ustawianie kolorów:
 Za omoc¹ rzycisku   lub   wybierz
NASYCENIE KOLORÓW.
 Nacinij rzycisk  , aby zwiêkszyæ oziom koloru.
 Nacinij rzycisk  , aby zmniejszyæ oziom koloru.
Ustawianie kontrastu:
 Za omoc¹ rzycisku   lub   wybierz
KONTRAST.
 Nacinij rzycisk  , aby zwiêkszyæ oziom kontrastu.
 Nacinij rzycisk  , aby zmniejszyæ oziom kontrastu.
Ustawianie ostroci:
 Za omoc¹ rzycisku   lub   wybierz OSTROÆ.
 Nacinij rzycisk  , aby zwiêkszyæ oziom ostroci.
 Nacinij rzycisk  , aby zmniejszyæ oziom ostroci.