JVC LT-42R10BU User manual

ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ITALIANO
SUOMI
DANSK
SVENSKA
LT-32R10BU
LT-42R10BU
WIDE LCD PANEL TV
16:9 LCD TV
TELEVISEUR A ECRAN LCD PANORAMIQUE
BREEDBEELD LCD TV
TELEVISOR CON PANEL LCD PANORÁMICO
TV LCD WIDESCREEN
NESTEKIDENÄYTÖLLÄ VARUSTETTU LAAJAKUVATELEVISIO
WIDE-SCREEN LCD-TV
BREDBILDS LCD-TV
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJIZING
MANUAL DE INSTRUCCIONES
ISTRUZIONI
KÄYTTÖOHJE
INSTRUKTIONSBOG
BRUKSANVISNING
GGT0298-001A-L
LT-42R10BU_EN.book Page 0 Thursday, December 11, 2008 10:14 AM

LT-42R10BU_EN.book Page 0 Thursday, December 11, 2008 10:14 AM

ENGLISH 1
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
I
n
f
Information for Users on Disposal of Old
Equipment and Batteries
Notice:
Products
Battery
The sign Pb below
the symbol for
batteries indicates
that this battery
contains lead.
[European Union]
These symbols indicate that the electrical and electronic equipment
and the battery with this symbol should not be disposed of as
general household waste at its end-of-life. Instead, the products
should be handed over to the applicable collection points for the
recycling of electrical and electronic equipment as well as batteries
for proper treatment, recovery and recycling in accordance with your
national legislation and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve
natural resources and will help to prevent potential negative effects
on the environment and human health which could otherwise be
caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these
products, please contact your local municipal office, your household
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page
www.jvc-europe.com to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment and batteries.
ENGLISH Dear Customer,
This apparatus is in conformance with the valid European directives and standards
regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
LT-42R10BU_EN.book Page 1 Thursday, December 11, 2008 10:14 AM

2
Warning Please follow all the guidelines below
Follow this manual regarding
setup!
zConnect only to a 220 - 240 V,
50 Hz AC outlet.
Unplug the power cord when
going out!
zThe power buttons
on the remote
control and the TV
unit cannot
completely turn off
the TV. (Make
appropriate arrangements for
bedridden people.)
Make enough room for inserting
and removing the power plug!
Place the TV as close to the
outlet as possible!
zEven if the TV’s power lamp
is unlit, the main power
supply is not cut off
unless the power cord is
unplugged. The main
power supply for this TV is
controlled by inserting or
removing the power plug.
Never cut or damage the
power cord!
zIf the power plug is
not the right shape, or
the power cord is not
long enough, use an
appropriate plug
adapter or extension
cable. (Consult your retailer.)
Never try to repair the TV
yourself!
gIf the problem cannot be
solved in
“Troubleshooting” (P. 30),
unplug the power cord and
contact your retailer.
For more details on installation, usage and safety gConsult your retailer
When attaching the TV to the
wall, use the optional JVC
wall mounting unit!
zConsult a qualified technician.
zSee the included manual on
mounting procedures.
zJVC assumes no responsibility
for damage due to improper
mounting.
Do not allow the TV to fall!
zDo not rest your elbows on, or allow
children to hang from the TV. There
is a risk that the TV will fall and
cause injuries.
If the TV is damaged or
behaving strangely, stop
using it at once!
gUnplug the power cord
and contact your retailer.
Take care when handling the
glossy finish!
zFor more details, see P. 7.
Handle LCD panel with care!
zUse a soft, dry cloth when
cleaning.
Never dismantle the rear panel!
zIt may cause an electric shock.
Never place anything on the
TV!
Never expose to rain or
moisture!
Never insert objects into the
cabinet openings!
zIt may cause a fatal
electric shock. Take
care when children
are near.
Never obstruct the ventilation
holes!
zIt may cause overheating or a
fire.
zPlacing liquids,
naked flames,
cloths, paper, etc. on
the TV may cause a
fire.
zTo prevent fire or
electric shock, never
allow liquids to enter
the unit.
Never listen to headphones at
high volume!
zIt may damage your hearing.
Hold the TV so as not to scratch
the screen!
zDo not touch the screen when
carrying the TV.
Do not carry the TV on
your own!
zIn order to prevent
accidents, ensure that
the TV is carried by
two or more people.
On disposal of the TV!
zFollow the
instruction in
“Information for
Users on Disposal
of Old Equipment
and Batteries”
(P. 1).
LT-42R10BU_EN.book Page 2 Thursday, December 11, 2008 10:14 AM

USE SETTING
TROUBLE?
PREPARE
IMPORTANT
3
ENGLISH
ENGLISH
Please read “Getting started” (P. 8 - 15).
The main descriptions are in the following pages.
Contents
Connecting the
external devices
and aerial
Choosing a video
connection
Initial settings
Editing channels
9
PAGE 12 PAGE
10
PAGE
Suomi
Română
Türkçe
Language
Svenska
Norsk
Dansk
Nederlands
Castellano
Italiano
Deutsch
Français
English
Català
Português
Magyar
Polski
13
PAGE
14
PAGE
First things first! zWarning..............................................2
Getting started zRemote control...................................4
zNames and functions of parts ............6
zGetting started ...................................8
Let’s try it out
Try the advanced features
zEnjoy your new TV!..........................16
zWatching TV.....................................17
zViewing teletext................................18
zWatching videos / DVDs ..................19
zUseful functions ...............................20
Just the way you like it zConfiguring your remote control.......22
zCustomising your TV........................24
Picture.............................................24
Features (sub menu).......................25
Sound..............................................26
Features..........................................27
Set Up .............................................28
When you have trouble zTroubleshooting ...............................30
zTechnical information .......................32
z“CH/CC” list......................................33
zSpecifications ...................................34
To set up your TV
LT-42R10BU_EN.book Page 3 Thursday, December 11, 2008 10:14 AM

4
The functions of the remote control buttons are explained as
follows.
This remote control can be configured to operate up to four
different devices simply by changing the remote code.
“Configuring your remote control” (P. 22)
Mute.
Turn on / off (standby) the TV.
Enter channel / page number.
Channel information. “Watching TV” (P. 17)
Watch video etc. “Watching videos / DVDs” (P. 19)
Colour buttons:
Select a page when viewing teletext.
Operate functions in menus.
Switch between “TV / STB / DVD / AUDIO”.
(P. 22)
STB
AUD IO
Return to TV.
Display on-screen menu. “Customising your TV” (P. 24)
Select and confirm settings in menus.
Change channel / page.
Volume control.
View teletext. “Viewing teletext” (P. 18)
To the previous channel.
Hold the current page when viewing teletext. (P. 19)
Display your favourite list when viewing teletext. (P. 18)
Remote control
TV
LCD
STB
AUDIO
F. T / L
TOP MENU
GUIDE
LT-42R10BU_EN.book Page 4 Thursday, December 11, 2008 10:14 AM

ENGLISH 5
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
zFor buttons that can be used to operate other devices, refer to
“Configuring your remote control” (P. 22).
Display hidden information when viewing teletext. (P. 19)
Enlarge the text when viewing teletext. (P. 19)
Choose a favourite channel. (P. 17)
Display sub-pages when viewing teletext. (P. 18)
Save your favourite page when viewing teletext. (P. 18)
Switch briefly from teletext to TV when viewing teletext. (P. 19)
Display the index page when viewing teletext. (P. 19)
Change the aspect ratio. (P. 20)
Turn on “3D Cinema Sound”. (P. 20)
Change the sound mode or language. (P. 21)
Set the sleep timer. (P. 21)
Note
LT-42R10BU_EN.book Page 5 Thursday, December 11, 2008 10:14 AM

6
Power lamp zPeel off the protection films pasted on the glossy finish of the TV after the
TV has been placed properly. (P. 7)
Remote control sensor
Turn on / off (standby) the TV.
Headphone jack (stereo mini jack R3.5 mm)
Change channel / EXT terminal.
To switch to an external input, press P repeatedly.
Volume
Eco Sensor
g“What is “Eco Sensor”?” (P. 32)
ON: Lit
OFF: Unlit
zWhen “Power Lamp” is set to “Off”, the Power lamp will not light up.
g“Power Lamp” (P. 27)
Note
Names and functions of parts
LT-42R10BU_EN.book Page 6 Thursday, December 11, 2008 10:14 AM

ENGLISH 7
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
Be careful when handling the glossy finish of the TV
The glossy finish of the TV scratches easily.
zProtection films have been pasted onto the glossy finish of the TV to
prevent scratches. Peel off the films after the TV has been placed properly.
zIf the glossy finish gets dirty, clear the dust off the glossy finish first. Then
wipe softly with the cleaning cloth provided. If you do not clear the dust
first, or you wipe the glossy finish too hard, or a cleaning cloth other than
the one provided is used, the glossy finish may be scratched.
Change the direction of TV
Handling the glossy finish of the TV
Glossy finish
Attach the stand to the TV (LT-32R10BU only)
1
2
LT-42R10BU_EN.book Page 7 Thursday, December 11, 2008 10:14 AM

8
Please read P. 9 - 15 of this manual to set up your TV.
zStand and screws are also included. For details, refer to page 7.
(LT-32R10BU only)
䡵Power requirements
zConnect the power cord only to a 220 - 240 V, 50 Hz AC outlet.
䡵When attaching the TV to the wall, use the optional JVC wall mounting unit
zConsult a qualified technician.
zSee the included manual on mounting procedures.
zJVC assumes no responsibility for damage due to improper mounting.
zMounting holes for wall mounting unit:
LT-32R10BU:
M5 x 4, 200 mm x 200 mm
Depth of screw hole is 7 mm from the surface of the TV.
LT-42R10BU:
M5 x 4, 400 mm x 200 mm
Depth of screw hole is 13 mm from the surface of the TV.
䡵Installation requirements
zPlace the TV on a flat and stable location.
zTo avoid overheating, ensure the unit has ample room.
Use two “AAA/R03” dry cell batteries. Insert the batteries from the -end,
making sure the +and -polarities are correct.
Check accessories
Install your TV
Remote control
RM-C1932 “AAA/R03” Batteries
(For confirming the TV
works)
Cleaning cloth
(For details on using the
cleaning cloth, see P. 7.)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Insert the batteries
200 mm
150 mm 50 mm 150 mm 50 mm
Getting started
LT-42R10BU_EN.book Page 8 Thursday, December 11, 2008 10:14 AM

ENGLISH 9
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
Make sure all the devices and the TV are turned off.
The names of the devices shown in the following illustration are examples.
The alphabets A, B, C, D, E and F indicate the type of connections. Refer to
P. 10 - 11 to find the best connections that are possible with your devices.
zPlease read the user manuals of each device before setting up.
zConnecting cables are not supplied with this TV.
Connecting your external devices
Note
Audio system
Satellite broadcast tuner
VCR / DVD recorder
EXT-1 AUDIO OUT
EXT-4*
(HDMI 1)
EXT-5*
(HDMI 2)
EXT-6*
(HDMI 3)
HD Video camera
Digital Satellite broadcast tuner
DVD player
Video camera
Game consoles
Not available.
(For service adjustments)
DVD player
D
D
C/E A/B
AA
F
EXT-2 EXT-3
* EXT-4, EXT-5 and EXT-6 are HDMITM Connector.
LT-42R10BU_EN.book Page 9 Thursday, December 11, 2008 10:14 AM

10
Choose your best connection
You can connect your TV to other devices in different ways. Check your
devices and choose the best connection. In addition, please read “Notes”
before using.
Please do not change any of the menu settings before completing the “Initial
settings” (P. 13). Otherwise, the “Initial settings” will not start automatically.
Picture
quality Other devices Connecting cables Connect to your TV Available signals Notes
Best
A
HDMI HDMI cable
EXT-4
EXT-5
EXT-6
Input
zHDMI (digital)
SD: 576i (625i), 480i (525i)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i),
1080p (1125p) / 24Hz,
1080p (1125p) / 50Hz,
1080p (1125p) / 60Hz, 720p (750p)
Audio L / R
If there is no sound,
change the “HDMI-1
Audio Setting” (P. 28).
Please use a High
Speed HDMITM Cable.
High Speed HDMITM
Cables are tested to
carry an HD signal up to
1080p and higher.
BDVI
Audio DVI-HDMI cable,
Audio cable
EXT-4
EXT-3: L and R jacks
Input
zDVI (digital)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i),
1080p (1125p) / 24Hz,
1080p (1125p) / 50Hz,
1080p (1125p) / 60Hz, 720p (750p)
zAudio L / R (analogue)
If there is no sound,
change the “HDMI-1
Audio Setting” (P. 28).
Better
C
Component
video and Audio
Component video cable,
Audio cable
EXT-3
Input
zComponent (analogue)
SD: 576i (625i), 480i (525i)
ED: 576p (625p), 480p (525p)
HD: 1080i (1125i), 720p (750p)
zAudio L / R (analogue)
Change the EXT-3
setting from “ ”
(composite) to “ ”
(component). (P. 29)
Getting started
LT-42R10BU_EN.book Page 10 Thursday, December 11, 2008 10:14 AM

ENGLISH 11
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
D
SCART
(Euroconnector)
SCART cable
EXT-1
Input
zComposite video (analogue)
zRGB input (analogue)
zAudio L / R (analogue)
Output
zAnalogue TV out (composite video and
audio L/R) (analogue)
EXT-2
Input
zComposite video (analogue)
zS-Video (analogue)
zAudio L / R (analogue)
Output
zDubbing out (composite video and audio
L/R) (analogue)
If you want to input the
S-Video signal, change
the “Ext Setting”. (P. 29)
Select the dubbing
source in “Ext Setting”.
(P. 29)
Good
E
Video and audio
Video and audio cable EXT-3: V, L, R jacks
Input
zComposite video (analogue)
zAudio L / R (analogue)
Change the EXT-3
setting from “ ”
(component) to “ ”
(composite). (P. 29)
Audio system Connecting cables Connect to your TV Available signals Notes
F
Audio input Audio cable AUDIO OUT
Output
zAudio L / R (analogue)
You cannot listen to the sound from a
device with connection A and B.
LT-42R10BU_EN.book Page 11 Thursday, December 11, 2008 10:14 AM

12
Connecting the aerial
AERIAL
zAfter all the connections
have been made, insert the
plug into an AC outlet.
Connect the aerial
AERIAL
Connect a VCR / DVD recorder
zAfter all the
connections have
been made, insert
the plug into an AC
outlet.
VCR / DVD recorder
EXT-2
EXT-1
Getting started
LT-42R10BU_EN.book Page 12 Thursday, December 11, 2008 10:14 AM

ENGLISH 13
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
I
n
i
The initial settings will begin automatically when the TV is turned
on for the very first time. Follow the on-screen instructions to
perform the settings.
Initial settings
1Turn on
zIf the remote control doesn’t work,
confirm that the mode is set to “TV”.
2Start initial settings
zIf the JVC logo does not appear, refer to “To perform initial
settings again”.
3Select a language
䡵To the previous screen g
䡵Exit g
䡵To perform initial settings again
Take note that performing initial settings again will cause all
channel related settings to be lost. Press the “MENU” button to
display the menu, then press and hold the number button “1”
for more than 3 seconds to start initial settings.
䡵If you wish to make changes later
g“Language” and “Auto Program” (P. 28)
Suomi
Română
Türkçe
Language
Svenska
Norsk
Dansk
Nederlands
Castellano
Italiano
Deutsch
Français
English
Català
Português
Magyar
Polski
Bset
Aselect
4Select the country of installation
zIf the country you want to select is not available, press the
yellow button to check the next page.
5Automatically register channels
zIf “ACI Start” appears, start ACI. The cable channels will be
registered quickly. For details, refer to “What is “ACI”
(Automatic Channel Installation)?” (P. 32).
6Check what was registered
䡵To edit channels
g“Editing channels” (P. 14)
7Finish
select
Belgium
Nederland
Italia
España
France
Deutschland
United Kingdom
Country
Norge
Suomi
Sverige
Österreich
Danmark
Switzerland
Ireland
Auto Program
(blue)
Auto Program
CH 02
0%
select a channel
ARD
_ _ _ _ _ _
AV
PR ID
Edit
CH/CC
01 CH
02 CH
03 CH
04
05
06
07
CH
CH
CC
CC
02
03
04
05
06
01
02
LCD
LT-42R10BU_EN.book Page 13 Thursday, December 11, 2008 10:14 AM

14
You can edit the channel list.
Editing channels
1Display the “Edit” menu
2Edit channels
䡵To the previous menu
g
䡵Exit
g
3Finish
Aselect
Bnext Bnext
Aselect
Select “Set Up” Select “Edit/Manual” Display the menu bar
ARD
_ _ _ _ _ _
AV
PR ID
Edit
CH/CC
01 02CH
02 03CH
03 04CH
04
05
06
07
05CH
06CH
01CC
02CC
select a
channel
Select channel Select edit function
ID
Insert Delete
Manual
Move Next
Move Move a channel’s position (PR)
ID Edit a channel name (ID)
Insert Insert a new channel directly by entering the
CH/CC number
Delete Delete a channel
zPressing the button deletes the channel.
set
select
䡵When selecting a preset name from the “ID List”
Bset
Aselect character
Bmove position
Cset
Aselect
enter the first
character (blue)
䡵N
am
i
ng a c
h
anne
l
z“CH/CC” list g(P. 33)
Select a “CH/CC”
zReceives the
broadcast signal.
Enter a number
Getting started
LT-42R10BU_EN.book Page 14 Thursday, December 11, 2008 10:14 AM

ENGLISH 15
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
Manual Register a new channel
zPress the red or green button. Auto-search begins, and the nearest
frequency is imported.
gRepeat the previous steps until the desired channel is displayed.
ASearch a channel Fine tune BSet
Select a system
zIf necessary, press Xto
change the broadcasting
system.
g“Receivable broadcast
systems” (P. 32)
AV
PR ID
Manual
CH/CC
01
02 03CH
03 04CH
04
05
06
07
05CH
06CH
01CC
02CC
(B / G)ARD
_ _ _ _ _ _
02CH
LT-42R10BU_EN.book Page 15 Thursday, December 11, 2008 10:14 AM

LCD
16
Enjoy your new TV!
17
PAGE
Watching TV
18
PAGE
20
PAGE
Useful functions
Viewing teletext 24
PAGE
Watching videos / DVDs
Picture
19
PAGE
PR List
09
08
07
06
05
04
03
02
01 ARD
_ _ _ _ _ _
AV
PR ID
䡵Picture settings
(Picture Mode, Features, etc.)
䡵Sound settings
(Stereo/t-u, 3D Cinema Sound,
etc.)
䡵Set Up settings
(Auto Program, Language, etc.)
䡵Features settings
(Sleep Timer / Child Lock, etc.)
Customising your TV
䡵Change the aspect ratio
䡵Change the sound mode or language
䡵3D Cinema Sound
䡵Emphasize the bass sound
䡵Set the sleep timer
LT-42R10BU_EN.book Page 16 Thursday, December 11, 2008 10:14 AM

ENGLISH 17
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
LCD
zSwitch between mono / stereo / bilingual broadcasting
g“Stereo/t-u” (P. 21)
zUsing the TV buttons
g“Names and functions of parts” (P. 6).
zTo soften the picture for daily use, change the setting in
“Picture Mode” g“Picture Mode” (P. 24)
Channel information and clock
Register a channel to a button (Favourite channel)
1Turn on
zIf the remote control doesn’t work,
confirm that the mode is set to “TV”.
zPress again to turn the screen off and
put the TV into standby mode.
zTo completely turn off the TV, unplug the power plug.
2Select a channel
䡵Using PR list
䡵To the previous channel g
The power lamp on the TV lights.
PR List
09
08
07
06
05
04
03
02
01 ARD
_ _ _ _ _ _
AV
PR ID
PR List
zSelect a page gselect
Bview
Aselect
zClose PR List
䡵Press a channel number 䡵Move up or down a channel
E.g.
15 :
1 :
up
down
Note
While the channel is displayed
Press the number to register it on
The following “Picture” and “Sound” menu settings applied to the
channel will be stored in the favourite channel as well.
zPicture Mode / Digital VNR / DigiPure (P. 24 - 25)
zSurround / Bass Boost / MaxxBass (P. 26)
䡵Recall the favourite channel
䡵Check your favourite channels
gPress “ ” and confirm that the channels you have
registered have a beside them.
䡵Delete a favourite channel g“Favourite Setting” (P. 27)
Note
12:00
ARD
1
zPressing the button once displays the “PR List”.
zTime is displayed only when teletext broadcasting can be
received.
(No indication)
Time
Channel information
Set 1-4?
Hold down for 3 seconds
Programmed! Disappears after a
few seconds
Note
Favourite 1-4?
Watching TV
䡵Mute
䡵Volume
Press the number you registered
LT-42R10BU_EN.book Page 17 Thursday, December 11, 2008 10:14 AM

18
This TV can display TV broadcasts and teletext on the same channel in two
windows.
View sub-pages
Display sub-pages
Bookmark your favourite page
F. T / L
(red) (green)
updown
䡵Move up or down a page
䡵Release gPress “ ” again
F.T/L
1Display your favourites list
2Select a coloured button to save your page to
3Enter the number of the page to save
4Save
䡵Recall your favourite page
1 Display your favourites list
2 Press a coloured button
(red) (green) (yellow) (blue)
䡵Exit g
(red) (green) (yellow) (blue)
Viewing teletext
1
2Enter a teletext page
䡵Move up or down a
page
TEXT
TV TEXT
up
down
When watching TV
LT-42R10BU_EN.book Page 18 Thursday, December 11, 2008 10:14 AM