JVC Network Pack SA-DV6000 User manual

SA-DV6000
LST0154-001C
NETWORK PACK
User’s Guide

2
Contents
Introduction ...................................................................................................................................................... 3
Basic
Inserting/removing CF memory card/LAN card ............................................................................................................................... 4
Using LAN terminal .......................................................................................................................................................................... 5
LCD screen ...................................................................................................................................................................................... 6
Menu Settings
Menu screen structure ..................................................................................................................................................................... 7
NETWORK PACK menu screen items .............................................................................................................................................. 8
Setting the NETWORK PACK menu screen ................................................................................................................................... 10
Setting network parameters ........................................................................................................................................................... 11
NETWORK settings menu screen item........................................................................................................................................... 12
Setting user names and passwords ............................................................................................................................................... 14
Inputting character data for network settings ................................................................................................................................ 15
Restoring factory default ................................................................................................................................................................ 16
Encording
About video/audio encoding .......................................................................................................................................................... 17
Encoding parameter settings ......................................................................................................................................................... 18
LAN connection
About LAN Connection .................................................................................................................................................................. 19
Wired LAN ...................................................................................................................................................................................... 20
Wired Connection, single VTR to single Client PC .................................................................................................................... 20
Wired Connection, Multiple VTR to single Client PC ................................................................................................................. 21
Wired Connection, Multiple Client PC to a single VTR .............................................................................................................. 22
Wireless LAN .................................................................................................................................................................................. 23
Wireless Connection, single VTR to single Client PC ................................................................................................................ 24
Wireless Connection, Multiple VTR to single Client PC ............................................................................................................. 25
Wireless Connection, Multiple Client PC to a single VTR .......................................................................................................... 26
Proxy Settings................................................................................................................................................................................. 27
Using LAN card/LAN terminal
Streaming and capturing Video ..................................................................................................................................................... 28
Recording to DV tape and Client PC Simultaneously .................................................................................................................... 29
Recording to DV tape and Client PC Independently ..................................................................................................................... 30
Streaming and capturing from a Pre-Recorded DV tape ............................................................................................................... 31
Recording on a CF card
Preparing for CF card recording .................................................................................................................................................... 32
Recording to DV tape and CF card Simultaneously ...................................................................................................................... 33
Recording to DV tape and CF card Independently ....................................................................................................................... 34
Recording from a Pre-Recorded DV tape to a CF card ................................................................................................................. 35
Specifying the range of a DV tape and recording to CF memory card ......................................................................................... 36
Deleting all clip files on a CF memory card ................................................................................................................................... 37
Movie Clip
Selecting playback mode of movie clip ......................................................................................................................................... 38
Playing back a CF memory card .................................................................................................................................................... 39
Selecting another clip while playing a clip ..................................................................................................................................... 41
Protecting a clip file on a CF memory card .................................................................................................................................... 42
Delecting a clip file on a CF memory card ..................................................................................................................................... 43
Playing back CF memory card clips on your PC ........................................................................................................................... 44
Transferring a clip on a CF memory to a server ............................................................................................................................. 45
Transferring multiple clips on a CF memory card to a server ........................................................................................................ 46
Network remote control
Controlling the BR-DV6000/SA-DV6000 via a network................................................................................................................... 47
NETWORK SETUP page ................................................................................................................................................................ 49
FTP client setup ......................................................................................................................................................................... 50
FTP Server Account / ESS-ID / WEP key / LEAP Server Account Setup ................................................................................... 51
PORT SETUP page......................................................................................................................................................................... 52
VTR control ..................................................................................................................................................................................... 53
ENCODE PARAMETERS ................................................................................................................................................................ 54
STREAMCAPTURE(Playing back Video / audio using a PC and saving to file)............................................................................. 56
Transferring clips on a CF memory card to a server ...................................................................................................................... 60
Others
TOP PAGE can be customized ...................................................................................................................................................... 61
Connecting Windows Media Player ............................................................................................................................................... 62
Connecting QuickTime Player ........................................................................................................................................................ 63
About updating the network pack .................................................................................................................................................. 64
Troubleshooting .............................................................................................................................................................................. 65
Checking communication / connection .......................................................................................................................................... 67
Terminology .................................................................................................................................................................................... 68
About IP address/proxy server ....................................................................................................................................................... 70

3
Introduction
The SA-DV6000 Network Pack is designed to enhance and complement the BR-DV6000 DV Video Cassette Recorder functionality.
By adding networking capabilities to the BR-DV6000, the SA-DV6000 allows users to connect to and stream video and audio from the
VTR in real-time, from anywhere in the world.
Viewers can connect using Windows Media Player, Quick Time Player, or the application software provided with SA-DV6000.
All while recording the highest quality video to DV tape.
It is also possible to operate the BR-DV6000 (PLAY, STOP, REC, etc.) via a network.
The SA-DV6000 allows real-time streaming of video from BR-DV6000’s Video inputs as well as from pre-recorded DV and miniDV
tapes.
With bit rates ranging from 56 to 512kb/s, the SA-DV6000 supports many connection types, from MODEMS and ISDN to broadband.
When using the trigger mode function of this unit, video can be recorded to a client PC on a network.
The SA-DV6000 even allows the BR-DV6000 VTR to become a publishing point for a media server.
When used with a CompactFlash memory card, the SA-DV6000 features can enhance productivity of any studio.
At the same time as recording to a DV tape, scene file (streaming data) and clip list (CSV file) that contains information such as the
starting and ending points, time code, etc. are automatically recorded to the Compact Flash Memory.
This log file is readable by database, spreadsheet, and text editing programs, and can be use with non-linear editing systems.
The log and scene files are small enough to send anywhere, instantly through email.
Using the provided application (CFViewer), you can view thumbnail images of all recorded scenes, and even perform basic assemble
editing for review.
In addition, the CF card prevents SA-DV6000 obsolescence.
As improvements are made, just download the files from our Web Site onto a CF card, and update your SA-DV6000.
Characters and symbols used in this instruction book
Caution Cautionary notes concering operation of the unit
Memo Reference such as restrictions of features, etc.
☞Reference page or item
* In general, the names of products manufactured by other companies and mentioned in these instructions are trademarks or regis-
tered trademarks of these companies.
Symbols like ™, ©, ®, etc., are not used in these instructions.

4
Caution
●Make sure the power of BR-DV6000 is off when inserting/
removing a CF memory card/LAN card. Inserting/removing
a card with the unit power on may damage the data storage
section of the CF memory card or the card itself.
●Do not remove the power cable with the power of the BR-
DV6000 on. Recorded section on the CF Memory Card or
the CF Memory Card itself may be damaged as a result.
●Do not use the wireless LAN card continuously for more
than 48 hours.
LCD screen
Card status display
: Flashes during
initialization
: LAN card or built-
in LAN enabled
: CF memory card
Inserting card
1. Turn off the BR-DV6000 power.
2. Insert a card into the SA-DV6000 card slot.
3. Turn on the BR-DV6000 power.
●Card status according to the inserted card type is displayed on
the LCD screen. (☞page 6)
●The card status is displayed when setting the LCD screen to the
Enlarged display mode.
Memo
When turning the power on, the card status
display shown on left will flash during initial-
ization.
Basic Inserting/removing CF memory card/LAN card
●TheSA-DV6000 accepts the following cards for which operation has
been confirmed: (As of June 2003)
Operating voltage 3.3 V / 5 V
Current consumption Max. 250 mA
●Wired LAN-card
US: EA2900-117 (Revision C) (Name of manufacturer: Socket
Communications, Inc)*1
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket
Communications, Inc)*1
Asia: EA2906-194 (Revision C) (Name of manufacturer: Socket
Communications, Inc)*1
* Revision indicated on the upper right of package production label.
●Wireless LAN-card
TEW-201PC
TEW-202CF
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
TRENDware)
WCF11 (Name of manufacturer: LINKSYS)*2
AIR-PCM350
(Name of manufacture: Cisco Systems)
FCCID: LDK102040
●CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1
*1: Use PCMCIA card TYPE 1or TYPE 2adapter
*2: Use PCMCIA card TYPE 2adapter
For the latest operational check card, visit the website
below or contact your JVC dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/
Removing card
1. Turn off the BR-DV6000 power.
2. Press the EJECT button of SA-DV6000 and remove the card.
EJECT button
SA-DV6000
Card slot
CF memory card or
LAN card
CH1
NDF
12H34M34S10F
FREE
CH2
PLAY
SP222 min
01/02/03
01:23:45 INS
AM
OVER
48k
T
C
L
dB010203040
OVER
W
Y/C
VA
SYNC
‰
e
CF
e
CF
Surface

5
Other than the use of a LAN card, this unit is also equipped with a LAN terminal for LAN connection.
Basic Using LAN terminal
LAN cable types
●When connecting directly to a PC, use a 10/100 BASE-T cross cable.
●When connecting to a network hub, use a 10/100 BASE-T straight cable.
Connecting to the LAN terminal
Completely insert the connector of the LAN cable.
Caution
●Do not remove the LAN cable when the Link LED is on. For a short time, menus cannot be opened.
●Do not connect/disconnect the LAN cable when recording to a CF memory card.
●Do not mount a LAN card when the Link LED is on.
Link LED
The Link LED will light when connected to a network using the LAN terminal.
When mounted with a LAN card, the Link LED will not light.
When using both LAN card and LAN terminal
When mounted with a LAN card, the LAN card will be given priority for LAN connection. In this case, communication via the LAN
terminal is not possible.
Memo
When mounted with a CF memory card, the following can be performed:
●Transferring of a clip recorded on a CF memory card to a server via the LAN terminal.
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV
IN/OUT
IN OUT OFF
AUDIO
REMOTE2
IN
B-YR-Y
SYNC IN TIME CODE
IN OUT
Y
COMPONENT
OUT CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE
SIGNAL
GND
Y/C
LAN
Link LED
LAN terminal
LAN cable

6
Basic LCD screen
Information from Network Pack SA-DV6000 is displayed on the BR-DV6000 LCD screen.
Card status and warnings will be displayed when setting the LCD screen to the Enlarged display mode.
\Card status displays
Display
(White display)
(Red display)
(White display)
(Red display)
Flashing display
Description
Flashing display during initialization (after
power on).
LAN card is inserted in the Network Pack, or
built-in LAN is enabled.
Video/audio data is being sent via LAN card.
CF memory card is inserted in Network Pack.
CF memory card is being recorded with data.
Card is inserted in Network Pack but trans-
mission is not available.
There is possibility of unit malfunction.
Contact your nearest JVC dealer.
e
e
CF
CF
X
\CF Memory card warning display
Displays CF memory card status and system errors.
* For details concerning warning displays, see page 65.
When inputting the 44.1kHz sampling audio signal
This unit is not compatible with audio sampling frequency of
44.1kHz. When playing back a tape recorded with audio of
44.1kHz on BR-DV6000 or when inputting audio in the 44.1kHz
mode into the DV terminal, the audio will be processed as
muted sound. However,the video will be processed as nor-
mal.
Receiving Level Indicator of Wireless LAN
If you are using wireless LAN card that can detect receiving
level, receiving level indicator is shown next to the card status
information on LCD of the BR-DV6000. The indicator shows
value from 5 to 0, 5 means maximum level and 0 means mini-
mum level. (The indicator is for reference. The value does not
guarantee communication.)
Some cards may not be able to accurately display the strength
of the signals of the wireless LAN if communication is abruptly
interrupted.
CH1
NDF
12H34M34S10F
FREE
CH2
PLAY
SP222 min
01/02/03
01:23:45 INS
AM
OVER
48k
T
C
L
dB010203040
OVER
W
Y/C
VA
SYNC
‰
e
CF
Card status display
About restrictions of BR-DV6000
Only BR-DV6000 marked with (A) at the end of the model
name on the Rating Label is compatible with this unit (SA-
DV6000).
If a line appears between the time code and level meter on
the LCD screen (Enlarged display mode) while SA-DV6000 is
mounted on BR-DV6000, the BR-DV6000 in use is not com-
patible with SA-DV6000 and requires an upgrade.
For details, consult your JVC dealer.

7
Menu settings Menu screen structure
When attaching Network Pack SA-DV6000 to BR-DV6000 DV Video cassette recorder, NETWORK PACK CONFIG menu and MOVIE
CLIP menu are added to the BR-DV6000 TOP MENU screen.
(These menus will not appear during initialization when the unit is first turned on.)
ENCODE .
MP EG .REC .........
MENU .RESET
PAGE .BACK ...
TRIG.
.CANCEL
..
NETWORKSETUP.
SETUP . .
MOVIE CLIP .SETUP
NETWORKPACKCONFIG
MA I N
(WMPundr8)
e(CFView r) e
.
SYSTEM ..
MENU
REMOTE ..
AUD I O . .
VIDEO. .
TC / UB / CL OCK . .
DISPLAY SET . . ..
E
MO V I C L IP. .
NETWORKPACKCONFIG
EXIT
NET WORKNSETUP. .
SETUP. .
PORT.
WIRELESS.LAN.SETUP. .
SETUP. .
SERVER.S
PAGE.BACK. . NNN
WOETNRK
MA I N
.ENCODE.SETUP .
FRAME.SIZE NNNNNNNN320x240.
BIT.RAT E. NNNNNNNNNN3 8 4 kb/s ..
MAX .F RAME.RAT ENNNNNMIDNNNNN
ST REAM. NNNNNNNNfor WM P NN
PRE LTE NNNNNNNNNAD1 NNNNN
.MOV I E .CL I P SETUP
DELETE .ALLNNNNNNNNNNNCANCEL
CANCEL
FORMA T . . . NNNNNNNNN . . .
REPEAT PLAY ..........REPEAT
CAPTURE . . ..................
FILE.SEND ............
PAGE .BACK ..................
TYPE
FRI
PAG.BAC NNNNNNNNNNNNNNNNNNEK
00 1 . 0asf WR/
IEOVMCIP
L
10 25/02/09 0 0:00:
00 2 . 0asf WR/
10 25/02/09 3 0:25:
00 3 . 0asf WR/
10 25/02/10 1 0:55:
00 4 . 0asf WR/
10 25/02/11 0 0:00:
AGE BACK
mc
mc
mc
mc
P
.NETWORK .SETUP .
HOS T .NAME . . ....
.......
NNNNNNNNNNNN
DHCP . NNNNN NOFFNNN
IP.ADDRESS . . ........
ASK . . .
NNNNNNN
SUBNET .MNNNNNNNNNNNNN
GATEWAY . . .N
.N
NAME .SERVER .
NNNNNNNNNNNNNNN
FTPECl i ent..
.N
PAGE .BACK ..N
NNNNNNNNNNNNNNN
HTTP.for WEB Browser
HTTP.for Media player
... .
RTSP.for Streamproducer
...
..
PAGE BACK.....NNNNN. .. NNNN
N
ST G. BACKNNNNNNNNNNNfor WMP N
N
PAG. BACK. NNNNNNNNNNNNNNNNN
N
SETUP.WI RELESS .LAN .
SETUP
AD .HOC .MOD E NNNNNNNNOFF
10C
CEL
CANCEL
Primary ESS .ID.
Secondary ESS I D
.NNNN . . .
.......REPEAT
Country ESS ID.......USAEAT
CH ... ................ H.
2CHWE P .KEY .............. ..
OFFLEAP ................. ..
2CHPAGE .BACK ............ ..
.
.SERVERN
SETUP .ON .WEB ........OFF ....
LEAP .USER .NAME . . . . . . 115200 .
LEAP .PASS .WO R D . . . . . . 1152
HTTP .PASS .WO R D . . . . . . 1152
00 .
HTTP .USER .NAME . . . . . . 11520
FTP .USER .NAME . . . . . .11520
FTP .PASS .WO R D . ....
PAGE .BACK ...
. 11520
0.
FTP C
MA C I N E N A ME ..
USER
H
NAME. .
PASSWORD . .
DIRECTORY. .
PASS IVE DE ONMO
LIENT SETU P
RTSP.for QuickTime
..
.. ..
..
TORPET
SUP
PAGE.BACK
TC 00:00: 000 . 0
TC 00:00: 000 . 0
TC 00:00: 000 . 0
TC 00:00: 000 . 0
TC 00:00: 000.0
TC 00:00: 000.0
TC 00:00: 000.0
TC 00:00: 000.0TC 00:00: 000.0
*1
*2
TOP MENU screen
NETWORK MAIN
menu screen
* Example of display when there are
clip files in the CF memory card
NETWORK PACK CONFIG
menu screen
MOVIE CLIP list screen
(☞page 39)
NETWORK SETUP
menu screen
PORT SETUP menu screen
WIRELESS LAN SETUP
menu screen
MOVIE CLIP SETUP
menu screen
SERVER SETUP
menu screen
FTP CLIENT SETUP
menu screen
ENCODE SETUP
menu screen
*1 Indicates the currently compatible version of Windows Media
Player.
*2 When (CFViewer) is displayed, a clip list (CSV file) that can be used
with CFViewer (provided application) is created. (During the TRIG
mode)

8
Menu settings NETWORK PACK menu screen items
䢇indicates default factory setting.
✩indicates items that can also be set from a PC. (☞page 54)
Item
NETWORK MAIN SETUP
ENCODE SETUP
FRAME SIZE
BIT RATE
MAX FRAME
RATE
STREAM TYPE
PRE FILTER
PAGE BACK
Setting
䢇320 ×240
160 ×120
56K
128K
256K
䢇384K
512K
MAX
䢇MID
MIN
䢇for WMP
for QT
䢇AD1
AD2
→OVER
FRAME SIZE
BIT RATE 320 ×240 160 ×120
MAX MID MIN MAX MID MIN
512K 15 10 7.5 30 15 10
384K 15 10 7.5 30 15 10
256K 15 7.5 5 30 15 7.5
128K 7.5 5 3 15 10 7.5
56K 3 1 1 10 7.5 5
FRAME SIZE
BIT RATE 320 ×240 160 ×120
MAX MID MIN MAX MID MIN
512K 12.5 5 5 25 12.5 12.5
384K 12.5 5 5 25 12.5 5
256K 12.5 5 5 25 12.5 5
128K 5 5 1 12.5 12.5 5
56K 1 1 1 12.5 5 5
Memo
•No sound will be heard when playing back using QuickTime while in the WMP mode.
•No sound will be heard when playing back using Media Player while in the QT mode.
•Set to WMP mode when recording to CF memory card.
✩
✩
✩
✩
Description
Displays menu screen for network related settings. (☞page 11)
Displays menu screen for setting video and audio compressions.
Sets the video compression size.
320 ×240: Sets the image size to 320 ×240 pixels.
160 ×120: Sets the image size to 160 ×120 pixels.
* The input image for a 160x120 pixel image is 160x120 pixels. However, they
will be 160x128 pixels when compressed.
Sets streaming speed (bps).
56K: MPEG4 24 kbps (G726 16 kbps for WMP) (µlaw 64kbps for QT)
128K: MPEG4 104 kbps (G726 16 kbps for WMP) (µlaw 64kbps for QT)
256K: MPEG4 224 kbps (G726 32 kbps for WMP) (µlaw 64kbps for QT)
384K: MPEG4 352 kbps (G726 32 kbps for WMP) (µlaw 64kbps for QT)
512K: MPEG4 472 kbps (G726 40 kbps for WMP) (µlaw 64kbps for QT)
Sets the frame rate per second. The maximum tranmitted frames per second varies
depending on the FRAME SIZE and BIT RATE settings as shown below:
\NTSC signal
\PAL signal
* The frame rates shown in the table are not guaranteed values.
Sets the player for stream playback.
for WMP : Media Player, Provided application
for QT : Quick Time
AD1 is effective for video with many still images and AD2 is effective for video with
motion.
Pressing the SET button or SEARCH–button returns to the NETWORK PACK CONFIG
menu screen.

9
Memo
When setting MPEG REC to SPLIT, the following will appear in the NETWORK PACK CONFIG menu screen.
CF REC: PUSH ‘SET’
Item
MPEG REC
MOVIE CLIP SETUP
DELETE ALL
FORMAT
PLAY MODE
CAPTURE
FILE SEND
PAGE BACK
MENU RESET
PAGE BACK
Description
Selects the operation method for recording video data to a CF memory card or sending
data to a Client PC from a LAN card/LAN terminal.
TRIG: Operation will start when pressing the REC and PLAY buttons of BD-DV6000 at
the same time. Use this setting when simultaneously recording to a DV tape.
SPLIT: Use this setting when recording or transferring with CF memory card or LAN
card/LAN terminal only. Operation starts when pressing the SET button of BR-
DV6000.
OFF: Recording will not be made to the CF Memory Card. Transmission of streaming
data to a PC from the LAN card/LAN terminal is possible.
Displays the menu screen for CF memory card related settings such as formatting or
deleting all recorded clip files.
Selecting EXECUTE and pressing the SET button deletes all clip files on the CF memory
card.
Protected clip files are not deleted.
Selecting EXECUTE and pressing the SET button starts formatting the card.
All recorded clips are erased.
Caution: All protected clip files and other files will also be erased.
Playback is performed from the specified clip file to the latest clip file and pauses at the
specified clip file.
Specified clip file is played backed 3 times.
Playback is performed 3 times from the specified clip file to the latest clip file.
When pressing the SET button, the FILE CAPTURE screen appears.
Recording can be made to the CF memory card by specifying the range of the DV
cassette tape in the FILE CAPTURE screen settings. (☞page 36)
When pressing the SET button, the clip file specified from a CF memory card can be
transferred to a specified server via FTP.
Transfer will be performed via the LAN terminal. (☞page 46)
Pressing the SET button returns to the NETWORK PACK CONFIG menu screen.
Selecting EXECUTE and pressing the SET button returns NETWORK PACK CONFIG
menu screen settings to the original factory settings.
Pressing the SET button SEARCH–button returns to the TOP MENU screen.
Menu settings NETWORK PACK menu screen items
Setting
䢇TRIG
SPLIT
OFF
䢇CANCEL
EXECUTE
䢇CANCEL
EXECUTE
OFF
REPEAT 1
䢇REPEAT
䢇CANCEL
EXECUTE

10
Menu settings Setting the NETWORK PACK menu screen
Menu screen settings can be made regardless of whether a card is inserted. Settings will be stored in the SA-DV6000 memory even
when turning the power off.
\Settings are made by viewing the LCD screen or video monitor.
1. Turn on the BR-DV6000 power.
2. Press the MENU button. The TOP MENU screen appears.
3. Press the DISP (6) or the BLANK (7) button, move the cursor (t) to NETWORK
PACK CONFIG and press the SET button or SEARCH+ (t) button.
●The NETWORK PACK CONFIG menu screen appears.
4. Select the item to set.
Press the DISP (6) or the BLANK (7) button, move the cursor to the desired item
to set and press the SET button.
●The selected menu screen appears.
●When selecting MPEG REC or MENU RESET, the setting area flashes and the
setting can be changed. Set the item according to step 6.
●When selecting NETWORK MAIN SETUP, the network related setting screen
appears. (☞page 11)
5. Select an item within the menu screen.
Press the DISP (6) or the BLANK (7) button, move the cursor (t) to the desired
item to set and press the SET button.
●The setting area flashes and the setting can be changed.
6. Change the setting.
Press the DISP (6) or the BLANK (7) button to change the setting and press the
SET button.
●Flashing of the setting area stops and the new setting is confirmed.
\When changing multiple settings, repeat steps 5 and 6 above.
7. Return to the TOP MENU screen.
Press the DISP (6) or the BLANK (7), move the cursor (t) to PAGE BACK and
press the SET button or SEARCH–(8) button.
8. When quitting menu screen setting and returning to the normal screen, perform
one of the following operations.
●Press the MENU button.
●Move the cursor (t) to EXIT in the TOP MENU screen and press the SET
button.
●The NETWORK PACK CONFIG menu
screen will not appear during card initial-
ization (flashing display).
The NETWORK PACK CONFIG menu set-
tings cannot be changed when recording
to a CF Memory Card or transmitting data
via LAN.
TOP MENU screen
NETWORK MAIN SETUP menu screen
(☞page 11)
NETWORK PACK CONFIG
menu screen
Cursor
Setting
NE T WOR K T U P . .SE
ORTWENKACK
PON CIG F
ENCODE
MPE G R EC TRGI
MOV I E CLIP
MEN U R E S E T C AN C E L
PAGE BACK
TUP. .SE
TUP. .SE
MANI
(WMP under 8 CFVi ewer)()
TC 00 : 0 0 : 000 . 0
ODNCEEET
SUP
FRAME SIZE 320x24
BI T RATE 384kb/
MAX F RAME RA T E M I D
STREAM TYPE for WMP
PAGE BACK
0
s
TC 00 : 0 0 : 000 . 0
Setting
SYSTEM . .
MENU
REMOTE . .
AUD I O . .
VIDEO. .
TC / UB / CLOCK . .
DISPLAY SET . . ..
E
MO V I C L I P . .
NETWORKPACKCONFIG
EXIT
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
MENU button
SET button
SEARCH–( ) button
DISP ( ) button
BLANK ( ) button
SEARCH+ ( ) button

11
Menu settings Setting network parameters
When using a LAN card or LAN terminal, network related settings for SA-DV6000 are made using NETWORK MAIN SETUP of the
NETWORK PACK CONFIG menu. Settings will be stored in the SA-DV6000 memory even when turning the power off.
\Settings are made by viewing the LCD screen or video monitor.
Display the NETWORK SETUP menu screen
1. Turn on the BR-DV6000 power.
2. Check to see that the card status display has changed from a flashing to constant
display.
3. Press the MENU button to display the TOP MENU screen.
4. Press the DISP (6) or the BLANK (7) button, move the cursor (t) to NETWORK
PACK CONFIG and press SET button or SEARCH+ (t) button.
●The NETWORK PACK CONFIG menu screen appears.
5. Press the DISP (6) or the BLANK (7) button, move the cursor (t) to NETWORK
MAIN SETUP and press the SET button or SEARCH+ (t) button.
●The NETWORK MAIN menu screen will appear.
The NETWORK MAIN menu screen is structured by four screens.
NETWORK SETUP
PORT SETUP
WIRELESS LAN SETUP
SERVER SETUP
6. Press the DISP (6) or the BLANK (7) button, move the cursor (t) to SETUP and
press the SET button or SEARCH+ (t) button.
●The selected SETUP screen appears.
Items with “..” at the end of the name are set in the INPUT screen.
7. To return to the NETWORK MAIN SETUP menu screen, select PAGE BACK and
press the SET button or, press the SEARCH– (8) button.
8. To return to the normal screen after completing setting, perform one of the follow-
ing operations.
●Press the MENU button
●Select PAGE BACK to return to the TOP MENU screen. Select EXIT in the TOP
MENU screen and press the SET button.
TOP MENU screen
NETWORK PACK CONFIG
menu screen
NETWORK SETUP menu screen
SYSTEM . .
MENU
REMOTE . .
AUD I O . .
VIDEO. .
TC / UB / CLOCK . .
DISPLAY SET . . ..
E
MO V I C L I P . .
NETWORKPACKCONFIG
EXIT
NE T WOR K
TSE P . .U
TSE P . .U
ORTWENKACK
PON CIG F
ENCODE
MPE G R EC TRGI
MOV I E CLIP
IMA N
CACNLE ME NU R E S E T
PAGE BACK
TSE PU..
(WMPundr8)
e(CFView r) e
TC 00 : 0 0 : 000 . 0
NETWORK MAIN menu screen
WI RE
PORT
L
..
ESSN
LA
PAGE BACK
WOETNRK
ET
SP
U
SERVER .. ET
SP
U..
ET
SP U
WOETNR
K
..
ET
SP
U
MA I N
TC 00 : 0 0 : 000 . 0
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
MENU button
SET button
SEARCH–( ) button
DISP ( ) button
BLANK ( ) button
SEARCH+ ( ) button
HOST NAME . .
..
WOETNRKET
SP U
FOF
DHCP
IP ADD
RESS
..
..
R
..GAT EWAY
NAME ERVE
ntFTP Cl
S
ie
PAGE BACK
..NET M SAK
SUB
TC 00 : 00 : 000 . 0

12
NETWORK SETUP menu screen  indicates default factory setting.
✩indicates items that can also be set from the Web.
Item
HOST NAME
DHCP
IP ADDRESS
SUBNET MASK
GATE WAY
NAME SERVER
FTP Client
MACHINE
NAME
USER NAME
PASSWORD
DIRECTORY
PASSIVE
MODE
PAGE BACK
PAGE BACK
Setting
OFF
ON
OFF
ON
Menu settings NETWORK Settings menu screen item
Description
Displays the host name input setting screen. (4 ~ 64 alphanumerical characters)
[Factory setting: none]
Select whether DHCP server is used.
OFF: Use this setting when using LAN connection rather than DHCP.
When this setting is used, IP ADDRESS and SUBNET MASK, GATEWAY must also be set.
ON: Use this setting when using DHCP connection.
When using this setting, IP ADDRESS and SUBNET MASK , GATEWAY are automatically set.
* When DHCP is set to ON, WLAN ADHOC MODE cannot be set to AHDM or IBSS.
Displays the IP address setting screen.
When using LAN connection with DHCP set to OFF, this setting is required. Set a unique IP address.
IP ADDRESS setting is not available when DHCP is set to ON.
[Factory setting] 192.168.100.101]
Displays the subnet mask input screen.
This setting is required when using LAN connection with DHCP set to OFF.
SUBNET MASK setting is not available if DHCP is set to ON.
[Factory setting: 255.255.255.000]
Displays the gateway address input screen.
GATEWAY setting is not available when DHCP is set to ON.
[Factory setting: 192.168.100.254]
Sets the address of the domain name server. [Factory setting: 0.0.0.0]
Displays the FTP client setting screen.
Displays the host name/IP address input screen of the FTP server. (Max.64 alphanumerical characters)
[Factory setting: none]
Displays the user name input setting screen for logging onto an FTP server. (Max.16 alphanumerical
characters)
In the case of “anonymous”, user name will be inputted automatically. [Factory setting: anonymous]
Displays the password input setting screen for logging onto an FTP server. (Max.8 alphanumerical
characters)
Displays save folder input setting screen of the FTP server. [Factory setting:/home/none]
Selects ON/OFF of the PASSIVE mode.
If data connection cannot be established with the PASSIVE mode set to OFF, set the PASSIVE
mode to ON.
Pressing the SET button or SEARCH–button returns the unit to the NETWORK SETUP screen.
Pressing the SET button or SEARCH–button returns the unit to the NETWORK MAIN SETUP
screen.
→OVER
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩

13
PORT SETUP menu screen  indicates default factory setting.
Item
HTTP for WEB
Browser
HTTP for
Media player
RTSP for
Streamproducer
RTSP for Quick
Time
PAGE BACK
Setting
1
:
80
:
32767
1
:
8080
:
32767
1
:
8554
:
32767
1
:
554
:
32767
Description
The screen for setting RTSP and HTTP port numbers appears.
HTTP for Web Browser can be set with the Web browser HTTP port number and HTTP for Media
Player can be set with the Media Player HTTP port number. RTSP for Streamproducer can be set
with the Streamproducer RTSP port number and RTSP for Quick Time can be set with the Quick
Time RTSP port number.
Normally, the unit can be used without changing the factory settings.
If there are port restrictions for the LAN environment of your PC, consult your network administrator.
* When changing a port number, refer to “5-1. Connecting with Camcorder”of the
“Streamproducer”User’s Guide of the network distribution software to change port set-
tings.
* Do not use the same port numbers for RTSP and HTTP.
* When a port number is changed, switch the power of the BR-DV6000 off once, and then
switch it on again.
Pressing the SET button or SEARCH–button returns to the NETWORK SETUP menu screen.
Menu settings NETWORK Settings menu screen item
WIRELESS LAN SETUP menu screen
Item
AD HOC MODE
Primary ESS ID
Secondary ESS ID
Country
CH
WEP KEY
LEAP
PAGE BACK
Setting
OFF
AHDM
IBSS
NONE
NONE
USA
EU
FRN
SPN
JPN
1CH
:
10CH
:
14CH
ON
OFF
Description
Wireless LAN setting
OFF: Use this setting when performing communication via access point.
AHDM/IBSS: Use this setting when performing communication in AD HOC mode with a PC con-
nected with a wireless LAN card. (☞page 16)
* When this item is set to AHDM or IBSS, DHCP cannot be set to ON.
Displays the wireless LAN ESS-ID input setting screen (Max. 32 alphanumerical characters)
Setting for the country using wireless LAN
USA: USA, EU: Europe, FRN: France
SPN: Spain, JPN: Japan
(Set according to operating environment.)
Wireless LAN channel setting
CH setting changes depending on the Country setting.
USA: 1 ~ 11CH, EU: 1 ~ 13CH, FRN: 10 ~ 13CH, SPN: 10, 11CH, JPN: 1 ~ 14CH
When encrypting data, set the WEP KEY (10 or 26 characters consisting or letters a ~ f and num-
bers). Must be compatible with access point authentication for the use of this item.
Set to ON when connecting a Cisco Systems wireless LAN device and using the LEAP function.
Pressing the SET button or SEARCH–button returns to the NETWORK MAIN SETUP menu screen.
Memo
The LEAP function is exclusive to Cisco Systems wireless LAN devices. For details concerning
the LEAP function, see the instruction manual accompanying the wireless LAN device.
→OVER
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩

14
Menu settings NETWORK Settings menu screen item
SERVER SETUP menu screen  indicates default factory setting.
Item
SETUP ON WEB
LEAP USER
NAME
LEAP
PASSWORD
HTTP USER
NAME
HTTP
PASSWORD
FTP USER NAME
FTP PASSWORD
PAGE BACK
Setting
ON
OFF
Description
Set to ON when changing the USER NAME and PASSWORD from the Web.
Displays the LEAP USER NAME input screen. (4 ~ 32 alphanumerical characters)
Set when using the LEAP function.
[Default setting: leap-user]
Displays the LEAP PASSWORD input screen. (4 ~ 32 alphanumerical characters)
Set when using the LEAP function.
[Default setting: sa-dv-jvc]
Displays the HTTP USER NAME input screen. (3 ~ 8 alphanumerical characters)
Set when connecting from the Web browser.
[Default setting: jvc]
Displays the HTTP PASSWORD input screen. (4 ~ 8 alphanumerical characters)
Set when connecting from the Web browser.
[Default setting: sa-dv6k]
Displays the FTP USER NAME input screen. (3 ~ 8 alphanumerical characters)
Used when uploading USER PAGE.
[Default setting: ftp-user]
Displays the FTP PASSWORD input screen. (4 ~ 8 alphanumerical characters)
Used when uploading USER PAGE.
[Default setting: sa-dv]
Pressing the SET button or SEARCH–button returns to the NETWORK MAIN SETUP menu screen.
Memo
If higher security is desired, set this function to OFF so that changes cannot be made from the
Web.
Setting user names and passwords
\Changing the user name
When changing the HTTP USER NAME or FTP USER NAME, “NEXT STEP SET PASSWORD”will appear on the screen and the
PASSWORD menu screen is displayed.
When input is canceled in the PASSWORD menu screen, the user name will also be canceled.
It is possible to change only the password.
When changing the LEAP USER NAME setting, the PASSWORD menu screen will not appear automatically.
\Setting passwords
Set LEAP, HTTP and FTP PASSWORD using the procedure shown below.
1. First, enter the currently used password when “ENTER OLD PASSWORD”is displayed.
(When setting the password for the first time, enter the factory set value as the OLD PASSWORD.)
2. Next, enter the new password when “ENTER NEW PASSWORD”is displayed.
3. Lastly, enter the new password again when “CONFIRM NEW PASSWORD”is displayed.
Caution
•Do not forget to take a memo of the password. The password cannot be redisplayed.
•Each character input on the PASSWORD menu screen is hidden using asterisks (*).
•In case the password is forgotten, performing MENU RESET will return the unit to its factory settings.
✩
✩
✩
✩

15
Menu settings Inputting character data for network settings
Network related settings are made in the individual input setting screens.
Here, HTTP USER NAME is set as an example. Other settings are also made in the same manner.
Example: Changing HTTP USER NAME from jvc to jvc-1234
\Select HTTP USER NAME in the SERVER SETUP menu screen and press the
SET button.
●The USER NAME input setting screen appears.
1. Characters are selected from the character selection area on the bottom of the
screen.
Press the SEARCH+ (t) or the SEARCH–(8) button to flash “_”in the character
selection area and press the SET button.
●The setting changes to “jvc_”and the following digit of the setting area flashes.
2. Press the SEARCH+ (t) or the SEARCH–(8) button to select “1”in the charac-
ter selection area and press the SET button.
●The setting changes to “jvc_1”and the following digit of the setting area flashes.
3. Repeat the above step to set “jvc_1234”in the setting area.
\To delete or edit set characters, select “BS”within the character selection area and
press the SET button.
The previous character will be deleted. The character on the left will be deleted each
time this operation is repeated.
\When pressing the SEARCH+ (t) or the SEARCH–(8) button while holding down
the STOP button, the cursor will move 5 characters at a time.
\The currently inputted number of characters and the maximum number of characters
are displayed on the upper right of the screen.
\To cancel a setting, select the “6”within the character selection area and press the
SET button.The unit will return to the previous screen (SERVER SETUP menu screen).
4. When completed, select “ ” within the character selection area and press the SET
button.
●When changing the HTTP USER NAME or FTP USER NAME, “NEXT STEP
SET PASSWORD”will appear on the screen and the PASSWORD menu screen
is displayed . Set the password using the procedure shown above.
Memo
When setting is completed for items other than HTTP USER NAME and FTP USER
NAME, the unit will return to the previous screen (NETWORK MAIN SETUP or
SERVER SETUP menu screen).
4/8
RSEUNA
EM
jvc
abcd e f ghi j klmnopqrst uv
wx y z 0 1 2345 67 8 9
_
_
. /@
BSA
¯
TC 00:00: 000.0
5/8
RSEUNA
EM
jvc 1
abcd e f ghi j klmnopqrst uv
wx y z 0 1 2345 67 8 9
_
_
. /@
BSA
¯
TC 00:00: 000 . 0
3/8
RSEU
jvc
abcd e f ghijklmnopqrstuv
wx y z 0 1 2345 67 8 9 _
. /@
BSA
¯
NAMETTPH
TC 00:00: 000.0
8/8
RSEUNA
EM
jvc 1234
abcde f ghi j klmnopqrst uv
wx y z 0 1 2345 6 7 8 9
_
_
. /@
BSA
¯
TC 00:00: 000.0
HTTP USER NAME input setting screen
: The set text is confirmed and
returns to the previous screen.
Currently inputted number of characters/
max.number of characters
Setting area Character
selection area
BS: Backspace ( delete previous character )
A: Alternates between uppercase and
lowercase.
6: The set text is canceled and
returns to the previous screen.
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
MENU button
SET button
SEARCH–( ) button
SEARCH+ ( ) button

16
Menu settings Restoring Factory Defaults
1. Press the MENU button to display the TOP MENU screen.
2. Check to see that the card status display has changed from a flashing to constant
display.
3. Press the DISP (6) or the BLANK (7) button to select NETWORK PACK CONFIG
and press the SET button.
●The NETWORK PACK CONFIG menu screen appears.
4. Press the DISP (6) or the BLANK (7) button to set MENU RESET to “EXECUTE”
and press the SET button.
●When resetting the menu, “MENU RESET..”will appear at the bottom of the
screen for about 5 seconds.
●The NETWORK PACK CONFIG menu screen settings will return to the factory
settings.
Memo
Network related menu settings will not be initialized with the FACTORY SETTING
of BR-DV6000.
NETWORK PACK CONFIG
menu screen
NE T WOR K
..
TSE P . .U
TSE P . .U
TSE P . .U
ORTWENKACK
PON CIG F
ENCODE
MPE G R EC TRGI
MOV I E CLIP
MENU RESET
MEN U R E S E T E X E C U T E
PAGE BACK
(WMPundr8)
e(CFVi ew r)
e
MA I N
TC 00:00: 000.0
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
MENU button
SET button
SEARCH–( ) button
DISP ( ) button
BLANK ( ) button
SEARCH+ ( ) button

17
Encoding About video/audio encoding
Since today’s technology does not permit the economical streaming or capturing (to solid-state memory) of wideband digital video
signals, it is necessary to compress the video and audio signals for these applications.
Encoding is the process of compressing the original signal into a signal small enough to be useful for these applications. The SA-
DV6000 uses ISO MPEG-4, revision 1.04, the most widely accepted variant of the MPEG-4 algorithm, supported by industry leaders,
such as Microsoft. The audio encoder uses the ITU-T G.726 algorithm (for Windows Media Player mode) and µlaw algorithm (for Quick
Time mode).
With MPEG-4 video, the bit rate (amount of data per second), frame rate (number of frames per second) and the image size can be
changed as necessary.
However, these parameters directly influence the picture quality. When lowering the bit rate, for example, the picture quality will de-
crease but will have lesser load on the network and longer recording is also possible.
When lowering the frame rate, smooth video playback will be suffered but the picture quality will increase since the larger data volume
per frame. The same effect can also be observed when reducing the image size.
The selected encoding parameters affect both the streaming capabilities and the amount of video that can be stored on a CF memory
card, but does not affect the VTR’s outputs or the video recorded to tape. Please refer to the table on Page 8 for the encoding values
supported by the SA-DV6000.
Note
The selected encoding parameters are independent of, and do not affect the DV recording or VTR’s outputs.

18
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
MENU button
SET button
SEARCH–( ) button
DISP ( ) button
BLANK ( ) button
SEARCH+ ( ) button
Encoding Encoding parameter settings
NE T WOR K
ORTWENKACK
PON
CIG
F
ENCODE
MPE G R EC TRGI
MOV I E CLI P
MEN U R E S E T
PAGEB
ACK
TSE .
.
TSE .
.
T. .SE
NCELCA
(WMPundr8)
e(CFView r) e
TC 00:00: 000.0
.ENCODE.SET .
FRAME.SIZE NNNNNNN320x240.
BIT.RAT E. NNNNNNNNNN384K
AD1
..
MAX.F RAME.RATENNNNN MIDNNNN
PRE F I L NNNNNNNN NN
TER
ST REAM. NNNNNNNNfor WM P N
TYPE
PAG.BAC NNNNNNNNNNNNNNNNNNEK
TC 0 0 : 0 0 : 000 . 0
Setting
1. With the BR-DV6000 power ON, check to see that the network pack has initialized
and the card status display has stopped flashing.
2. Press MENU button until the TOP MENU screen appears in the video monitor or
LCD display.
3. Press the DISP (6) or BLANK (7) button to move the cursor (t) to NETWORK
PACK CONFIG and press the SET button. The NETWORK PACK CONFIG menu
is displayed.
4. Press the DISP (6) or BLANK (7) button to move the cursor (t) to ENCODE
SET and press the SET button.
●The ENCODE SET menu appears. From this menu you can adjust the frame
size (FRAME SIZE), bit rate (BIT RATE) and frame rate (MAX FRAME RATE).
5. Press the DISP (6) or BLANK (7) button to the desired parameter and select the
parameter to change by pressing the SET button.
●The max frame rate is set as MAX, MID, and MIN. The actual frame rates asso-
ciated with these values are determined by the current bit rate and frame size
settings, as shown below (for NTSC)1.
1Frame rates for PAL models are shown on Page 8.
FRAME SIZE
BIT RATE 320 ×240 160 ×120
MAX MID MIN MAX MID MIN
512K 15 10 7.5 30 15 10
384K 15 10 7.5 30 15 10
256K 15 7.5 5 30 15 7.5
128K 7.5 5 3 15 10 7.5
56K 3 1 1 10 7.5 5
Audio bit rates are described in BIT RATE of page 8.
Memo
Bit rates are to be used only as a guide. There will be a slight difference depending
on the video recorded.

19
LAN connections About LAN connection
The SA-DV6000 supports both wired and wireless LAN cards for connection directly to a Client PC, to a local Intranet or to the Internet.
Other than the use of a LAN card, the SA-DV6000 is also equipped with a LAN terminal for LAN connection. When using a LAN card,
however, the LAN terminal will be disabled. Up to 10 clients can access the VTR simultaneously, all viewing the video stream. If the
client is a media server or equivalent, numerous clients will be able to view streaming data via the server. (The number of client
connections allowed differs depending on the server.)
A list of the currently supported network interface cards can be found on Page 4. The SA-DV6000 supports:
●Both static and dynamic (DHCP) IP addressing
●User selectable user name and password
●HTTP and RTSP port setting
●Connections via Windows Media Player, Quick Time Player, Internet Explorer, or JVC’s Streamproducer
●WLAN Ad Hoc mode setting
●WEP with 128 bit encryption
NOTES
●Operation is only guaranteed for Windows 2000 (Professional or Server) and Windows XP (Home or Professional)
●Only Internet Explorer 5.0 or later is supported
●Only Windows Media Player 7.1 or later is supported (Not compatible with WM9.)
●If a mouse is clicked while streaming data is being played using an application such as Streamproducer, the audio may be
affected by noise.
If the noise becomes irritating, open the “Sound & Multimedia”property from the Windows Control Panel and set the sound of
“Windows Explorer Start Navigation”of “Sound Events”to off.
* For setting details, see Windows’Help.
Examples of configurations are described in the following pages. In order to construct a system with more flexibility than a conventional
system, the configurations shown on the following pages will be used.

20
LAN connections Wired LAN
10/100 BASE-T cross cable
Set a unique number to avoid doubling
Set the same domain
DHCP OFF
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
PROXY SERVER NO USE
DHCP SERVER NO USE
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
BR-DV6000
PROFESSIONAL
MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
* For the PC settings when using a LAN card,
refer to the instruction manual included with
the LAN card.
* Up to 10 clients can access at the same
time.
The SA-DV6000 supports wired LAN connections to client computers either locally, through an intranet or over the internet. Connecting
multiple VTR to a Client PC, or multiple Client PC to a VTR is supported. In addition, it is possible for a client to remotely control the VTR
as well.
A list of LAN card currently supported by the SA-DV6000 is shown on Page 4. Any compatible LAN card can be used in the Client PC.
For LAN card settings on the Client PC side, see the instruction manual of the Client PC or LAN card.
\Wired Connections, Single VTR to Single Client PC
NOTE:
Refer to the appropriate manual for setting the LAN card or Client PC
Perform the following settings for the above configuration.
●DHCP should be OFF2
●VTR and Client PC are set the same domain and different IP addresses.
●The Netmask of both the VTR and computer must be the same
●A CAT-5 cross cable is used between the VTR and computer
●Set the network connection of the Client PC to use no proxy server. Please refer to Page 27 for information regarding this setting if
troubles are encountered.
2In case the connecting Client PC is not a server equipped with a DHCP feature.