CONTRAST
BRIGHT
SHARP
COLOUR
PICTURE MODE u
TINT
WHITE BALANCE u
60
30
30
35
0
ON TIMER
PR
OFF TIMER u
02
00 : 15
ON TIMER
PR
OFF TIMER u
02
00 : 15
Sub menu Sub menu
function Setting Description
(Setting / Adjustment)
(PICTURE)
PICTURE
MODE
USER
You can change the
picture setting as you like.
(CONTRAST, BRIGHT,
SHARP, COLOUR, TINT)
VIVID Heightens contrast and
sharpness
SOFT Softens contrast and
sharpness
CONTRAST 0 j 60 Adjust contrast
(Lower j Higher)
BRIGHT 0 j 60 Adjust brightness
(Darker j Brighter)
SHARP 0 j 60 Adjust sharpness
(Softer j Higher)
COLOUR 0 j 60 Adjust colour
(Lighter j Deeper)
TINT -30 j +30
Adjust colour tint in NTSC only.
(Reddish j Greenish)
WHITE
BALANCE
NORMAL
Normal white balance
COOL Bluish white
WARM Reddish white
(SOUND)
AI VOLUME Prevent sudden increase or decrease of
sound when changing channels. (ON /
OFF)
SOUND MODE
DYNAMIC Enhances the level of bass /
treble sound
STANDARD
Standard sound
BALANCE -15 j +15 You can change the speaker
balance. (Left Stronger j
Right Stronger)
(TIMER)
OFF TIMER Turns off the TV to standby mode
ON TIMER Turns on the TV from standby mode
PR Select programme number
(FEATURE)
BLUE BACK Display a blue screen and mute the sound
when the signal is weak or absent.
(ON / OFF)
ECO MODE OFF Cancel the function
ECO-1 Mild contrast
(recommended)
ECO-2 Even contrast
7 Adjust picture contrast according to
room brightness
VIDEO-2
SETTING
Switch between video and component
signal (VIDEO / COMPONENT)
COLOUR
SYSTEM
Select an appropriate colour system
when the picture is not clear or no colour
appears.
(AUTO / PAL/ SECAM / NTSC3.58 /
NTSC4.43)
SOUND
SYSTEM
Select an appropriate sound system when
abnormal sound occurs even when the
picture appears normal. (B/G, I, D/K, M)
(SETUP)
LANGUAGE
Choose your desired on screen display
language
AUTO
PROGRAM
Automatically registers channels
PR
Select programme number
SKIP Skip the channel. You can set undesired
channels to be skipped. (ON / OFF)
FINE You can fine tunning by press / button.
SEARCH Beginning channel manual search by
press / button.
To exit from Menu or
To confirm after setting
3 Set the ON TIMER to your desired period of time. When the ON
TIMER is set to other than 00:00, the ON TIMER is activated. You
can set the period of time to a maximum of 12 hours in 15-minute
intervals.
4 Choose the PR (channel) that you want to watch when the TV turns
on. External input and AV position cannot be chosen for PR.
5 To off the ON TIMER, set the time to 00:00.
Area Country or Region Sound
System
Colour
System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
Thailand, India, etc
B/G
PAL
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Europe
Russia, etc. D/K SECAM
Czech Republic, Poland, etc.
PALGermany, Holland, Belgium, etc. B/G
UK, etc. I
Oceania Australia, New Zealand, etc. B/G PAL
Africa
Republic of South Africa, etc. I PAL
Nigeria, etc. B/G
Egypt, Morocco, etc. SECAM
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
1
2
Operating the menus
Using the TV’s MENU
ON TIMER
Using the timer
OFF TIMER
Note You can select OFF TIMER function by direct key.
Specifications
Troubleshooting
Sound and Colour system in your country or region
1 Display MENU
4 When is show
Display function setting
/ Change setting
5 / Change setting
2 / Select Main Menu function
3 / Select sub menu function
Set or adjust by press / button.
1
2
Set or adjust by press / button.
ON TIMER
OFF TIMER
No picture, no
sound
• Deactivate the BLUE BACK function if it is
turned on.
• Choose the appropriate sound system.
Refer to “SOUND SYSTEM”.
Snowy picture • Check the aerial cable and TV connections.
Stripes appear on
the picture
• Interference caused by devices such as an
amplifier, personal computer, or a hair drier.
Move it away from your TV.
Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use another antenna.
Poor picture • Choose the appropriate colour system.
Refer to “COLOUR SYSTEM”.
• Adjust the COLOUR or BRIGHT setting.
Refer to “PICTURE MODE”.
White and bright
still image look as
if it was coloured
• Inevitable phenomenon due to the nature of
the picture tube. This is not a malfunction.
Top of the image
from software
products or video
tape is distorted
• Due to the condition of the video signal, the
image was not properly recorded.
This is not a malfunction.
Poor sound • Adjust the sound frequency properly.
Refer to “SOUND SYSTEM”.
Cannot operate the
remote control
• The batteries may be exhausted.
Replace with new batteries.
• Ensure that you are operating the remote
control at less than seven meters from the
front of your TV.
Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode
and try operating the menus.
3 You can set the period of time to a maximum of 120 minutes in 10
minutes intervals.
4 When the remaining elapse time is one minute, “GOOD NIGHT!”
appears on the screen.
5 You can display the OFF TIMER screen again to confirm or change
the remaining time.
6 To off the OFF TIMER, select OFF or turn off the TV’s main power.
TV RF systems B, G, I, D, K, M
Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements AC 110 to 240 V, 50 Hz / 60 Hz
External
input
VIDEO-1 VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO-3 VIDEO input, AUDIO L/R input
Design and specifications subject to change without notice.
Colour patches
appear at the
corner of the
screen
• This maybe due to magnetized device such
as a speaker placed near to your TV. Move it
away from your TV. Alternatively, you can also
use the magnetic shielded speaker.
Image takes a
short period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
TV may emit
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling
sound is too frequent, request your service
technician for inspection.
Feel a slight
electric shock
when touching the
TV screen
• This is due to the static electricity of the picture
tube and it will not harm the human body.
This is not a malfunction.
4
3
