JVC AV-36D503/Y User manual

No.51948
May 2002
AV-36D503
AV-36D303
AV-36D203
1COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
AV-36D503/Y /R /M
AV-36D303/Y /R /M
AV-36D203/Y /R /M
CONTENTS
!SPECIFICATIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････････････
･･････････････････････････････････････････････････････････
･････････････････････････････ 2
!SAFETY PRECAUT IONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 3
!FEATURES････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････
･･････
･･･ 4
!FUNCTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･････････････････････････････････
････
･･ 4
!MAIN DIFFERENCE LIST ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 6
!HOW TO INDENTIFY MODELS････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････
･･････････････････････････････････････
･･･････････････････ 7
!SPECIFIC SERVICE INSTRUCTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････
･･････････････････････････
･････････････ 8
!SERVICE ADJUSTMENTS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････
･･････････････････････････････････････････
･････････････････････ 13
!PARTSLIST････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････
･･
･35
★
STANDAR D CIRCUIT DIAGRAM ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････
････････････････････････････････
････････････････2- 1
SERVICE MANUAL
COLOR TELEVISION
BASIC CHASSIS
GE
[RM-C251]
AV-36D503
[RM-C252]
AV-36D303, 203

No.51948
A
V-36D503
A
V-36D303
A
V-36D203
2
SPECIFICATIONS
ITEMS CONTE NTS
Dimensions (W×
××
×H×
××
×D) 37 - 7/8 ”×30 -1/2 ” ×24- 1/2 ” ( 962 mm×77 3m m×62 1mm)
Mass 14 9.6 Ibs / 68 .0kg
TV System and Color system
TV RF S
y
ste m CCIR(M)
Color S
y
stem NTSC-M
Sound S
y
stem BTS C ( Mul ti Ch annel S ound )
TV Receiving Channels and Frequency
VL Band (02～06 ) 5 4M Hz～88 MHz
VH Band (07～13 ) 1 74M Hz～21 6MHz
UH F Ba n d (14～69 ) 4 70M Hz～80 6MHz
CATV Re cei vin
g
Channels and Fre
q
uenc
y
Low Band (02～06 , A- 8) by ( 02～06 &01 )
Hi
g
h Band (07～13 ) b y ( 07～13 )
Mid Band (A～1) by ( 14 ～22 )
Su
p
er Band (J～W) by (23～36 )
H
yp
er Band (W+1～W +28) by ( 37 ～64 )
Ul tra Ba n d (W+29～W + 84) by ( 65 ～12 5)
Sub Mid Band (A8, A4～A1)by(01, 96～99 )
TV/CATV Total Channel 18 0 C han nels
Intermediate Frequency
VideoIF Carrier 45 .75 MHz
Sound IF Carrier 41 .25 MHz (4 .5M Hz)
Color Sub Carrier 3.5 8 M Hz
Power Input 12 0V A C, 60H z
13 3W [A V- 36D50 3]
Power Consumption 13 0W [AV -36 D303 , AV-36 D2 03]
Picture Tube 36 ” ( 90cm ) measur ed di agonally, Fu ll S quar e
Hi gh V ol ta ge 31 kV ±1.3 kV (at zer o beam curr ent)
Spea ker 2”×4- 3/4 ” ( 5×12 cm) Oval type ×2
Audio Power Output 5W+5W
Input terminals
INPUT1 Video 1V p- p, 75 Ω, RCA pin
S-Video Mini din 4 pin
Y : 1V p- p, ne gati ve syn c pr ovide d w hen t ermin ated with 7 5Ω
C : 0.2 86V p-p, b urst signal when terminated with 75 Ω
Audio L/R 50 0mV rm s( -4d Bs), hi gh imped ance, RC A pi n
INPUT2 Video 1V p- p, 75 Ω, RCA pin
Com
p
onent
(
Y
,
Pb
,
Pr
)
RCA pin
Y : 1V p- p, ne gati ve syn c pr ovide d w hen t ermin ated with 7 5Ω
Pb/Pr : 0.7Vp-p, 75Ω
Audio L/R 50 0mV rms( -4d Bs), hi gh imped ance, RC A pin
INPUT3 Video 1V p- p, 75 Ω, RCA pin
Audio L/R 50 0mV rms( -4d Bs), hi gh imped ance, RC A pi n
Audio Output 50 0mV rms(-4 dBs) , low Imp edanc e, 1kH z wh en m odulated 100 %, RCA pi n
AV Compu linkⅢ
ⅢⅢ
Ⅲinterf ace 3.5 mm mini j ack
Antenna terminal 75 Ω(V HF/U HF) Term in al, F-Type Con nector
RM-C251 (A A/R6/UM -3 battery×2) [A V-3 6D503 ]
Remote Control Unit RM-C252 (A A/R6/UM -3 battery×2) [A V-3 6D303 , AV -3 6D203 ]
Design & specifications are subject to change without notice.
(54MHz～80 4MHz)

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
3
SAFETY PRECAUTIONS
1. The d esign of t hi s p ro du ct c ont ai ns spec ial h ar dwar e, m an y
ci rcu it s a nd co mp on ent s s pecially for saf ety pur p oses. F or
continued protection, no changes should be made to the
or igi na l des ig n u nless a uth or ized in wr iti ng by t he m an uf actu re r.
Rep lacem en t parts m ust be id ent ic al t o t hos e u sed in th e
or igi na l circuit s. S er vic e sho uld be per f or me d b y qu al ifi ed
p ers onn el o nl y.
2. Al te r ation s of th e desig n o r circu i tr y of th e p r odu cts s hou ld n ot
b e mad e. A ny de si gn alte ra ti ons o r ad diti o ns wil l vo id th e
manufacturer's warranty and will further relieve the
m anu fact ur er of resp ons ib ilit y f or pe rs ona l i n ju ry or p r ope rt y
d am age r esu lt in g t her ef r om .
3. M an y e l ectr ical an d m ech an ic al pa rt s in th e p r odu cts h ave
sp ecial saf ety-relat ed c haract eris tics. Th ese char ac teristics ar e
oft en n ot e vid en t fr om visu al in spe ction no r can t he pr ote cti on
aff or de d by th em n ecess ar ily be o bta in ed b y usi ng
r eplac em ent co mp on ent s ra ted for h ig her vo l tag e, wa ttag e, etc.
Rep lacem en t pa rt s wh ic h h ave t hes e sp ecial s afet y
ch ar acter isti cs a re i d enti fie d in th e par ts list of S ervi ce m an ua l.
Electrical components having such features are identified
by shading on the schematics and by (!
!!
!) on the parts list
in S ervice manual . T h e u se of a su bst itu te re plac em en t which
does not have the same saf ety characterist ics as the
r eco mm en de d re pl ac em en t pa rt sho wn i n the pa rts l ist of
Se rvice ma nu al m ay c aus e sh ock, f ire, or o th er haz ar ds.
4. Use isola tion tr ansf orme r wh en hot c hass is .
The chassis and any sub-chassis contained in s ome products
ar e c on nect ed to on e side of th e AC p ower l ine . An isol a ti on
tr ansf or mer of ad equ ate cap acity sh ou ld be i nser t ed bet we en
th e p r odu ct and t he AC p ower su pp l y p oi nt while p er form ing
an y ser vi ce on so me pr o ducts wh en th e H OT ch assis i s
exp ose d.
5. Don't shor t between the LIVE side ground and ISOLATED
(NEUTRAL) side ground or EARTH side ground when
repairing.
So m e m od el's p ow er c ir cui t i s par t ly di f fer en t in t he GN D. Th e
diff er enc e of t he GND is shown by th e LI VE : (") side GND,
th e ISO LATED(NEUTRA L) : (#) sid e GN D an d EAR TH : ( $)
si de GN D. D on 't sho rt be twee n t he LIVE si d e GN D a nd
ISO LATE D(NEUTRAL) side GND or EARTH side GND a nd
never measure with a meas uring apparatus (oscilloscope etc.)
th e LI VE side GND and ISO LATED(NEUTRAL) sid e G ND or
EARTH side GND at th e s ame time.
If above note will not be kept, a fuse or any parts will be broken.
6. If an y re pa ir h as b ee n m ad e to th e ch assis, i t i s re com mend ed
th at t he B1 se ttin g sh ou ld b e chec ked or ad juste d (S ee
ADJU STM ENT OF B 1 POW E R SUPPL Y).
7. The hi g h volt ag e a pp li ed t o th e pi ctu re tu be mu st co nfo rm with
that specified in Service manual. Excessive high voltage can
cau se an i ncr ea se in X- Ray e mi ssion , arc in g an d possib le
com po ne nt d am ag e, th er ef or e op er ati o n un der excess ive hi gh
vol ta ge c ond it ions sh ou ld be ke pt to a m in imu m, or sh ou ld be
pr eve nt ed. I f seve re arc in g occu rs, r em ove th e AC p ow er
immediately and determine the cause by visual inspection
( in cor rect i nsta lla ti on , cr ac ked o r m elte d hi gh vol tag e h ar ness,
p oor s ol de rin g, etc. ). T o ma in ta in the pr op er m inimum le vel of
sof t X- Ray e mission , com p one nts i n th e hi g h vo ltag e ci rcui tr y
incl ud ing the pictu r e tu be mu st be the exa ct r ep lacem en ts or
alte rn at i ves a ppr o ved b y th e ma nuf actu r er of th e co mp lete
pr od uct.
8. Do n ot c hec k high volta ge by d r awin g a n arc. Us e a high
vol ta ge m ete r or a h i gh vol t age p ro be with a VTVM . Disch ar ge
th e p ictu r e tu be bef or e a tte mp ti ng me ter co nne ction , b y
con nec ting a clip lead t o th e grou nd frame a nd con necting t he
oth er e nd of t he l ead th r oug h a 10 kΩ2W resist or to t he ano de
bu tto n.
9. W hen se rvice is requ ir ed, ob ser ve th e o rig in al l ea d dress.
Extr a p r ecau tion sh ou ld be gi ven t o assu r e corre ct lea d dres s
in the h i gh volta ge c ircu it ar ea . W her e a sh ort circui t ha s
occu rr e d, th ose c omp on en ts th at i nd ic ate eviden ce of
overheating should be replaced. Always use the
m anu fact ur er's r eplace m ent com p on ents.
10 . Isolation Check
(Safety for Electrical Shock Hazard)
Af ter re- a ssem bling th e pr od uct , always pe rf or m an i so lati on
ch eck on th e expo sed m eta l p ar ts of th e c abi n et ( ant en na
ter m ina ls, vi de o/a ud i o in pu t and out put t er min als, C on tr ol
knobs, metal cabinet, screwheads, earphone jack, control
sh afts, etc.) to be sur e th e pro duct is saf e t o op er at e w ith out
d ang er of el ect rica l shoc k.
(1) Dielectric Strength Test
The is ol at io n b etw e en the AC pr ima r y cir cu it and all meta l par ts
exp ose d t o th e us er , par t icu lar ly an y expo sed m etal p ar t h avi ng
a return pat h to the ch assis sh ould withst and a volta ge of
11 00V AC ( r.m .s.) f or a p er iod of on e sec ond .
(. . . . Withs tand a voltage of 1100V A C (r.m. s.) to an appliance
r ate d up to 1 20V , a nd 3 00 0V AC ( r .m. s.) t o an ap pl ianc e r a ted
200V or more, for a period of one second.)
This meth od of test re qu ir es a t est eq uip me nt n ot g en er all y
fou nd i n t he ser vice t ra de.
(2) Leakage Current Check
Plug t he A C line c ord direct ly int o th e AC ou tlet (do not u se a
lin e is ol ati on tr a nsf ormer dur ing t hi s che ck.) . Usi ng a " L eaka ge
Cur rent T est er ", m ea sur e t he lea kag e cur ren t fr om each
exp ose d m eta l par t of th e ca bi ne t, p artic ul arly an y expo sed
metal part having a retu rn path to t he chassis , to a known good
ea rt h gr o und (wa ter p i pe, etc.) . A ny l ea kag e cur ren t m ust not
exceed 0. 5mA AC (r .m. s.) .
Howeve r, in t ro pical a r ea, this must no t e xc eed 0 .2m A AC
(r.m.s. ).
"
""
"Alte rnate Che ck M ethod
Plug t he A C line c ord direct ly int o th e AC ou tlet (do not u se a
line isolation transformer during this check.). Use an AC
vol tm et er h avi ng 100 0 o hm s per volt or m ore sen si tivit y i n the
fol lo win g ma nne r. C on nec t a 1 50 0Ω1 0W r esi stor pa ra lle led
by a 0.15μF AC- typ e cap acitor b etw e en an exp ose d m eta l
p art an d a kno wn g o od ear th grou nd ( wate r pip e, et c.).
M easu r e th e A C vo ltag e acr oss th e r esi st or wit h t he AC
voltmeter. Move the res istor connection to each exposed metal
part, particularly any exposed metalpart having a returnpath to
th e ch assis , an d mea sur e t he A C vol ta ge acr oss th e resi sto r.
Now, r eve rs e th e pl u g in t he A C out l et a nd r ep e at e ach
m easu r em en t. An y vol ta ge me asu re d m ust not exce ed 0.7 5V
AC (r.m. s.) . This corresp on ds t o 0 .5mA A C ( r.m. s.).
Howeve r, in tr op ic al ar ea, this must n ot excee d 0 .3V AC
(r.m.s. ). This corresp on ds t o 0 .2mA A C ( r.m.s.).
0.15μF A C-T YPE
1500Ω10W
GOOD
EARTH
GR OUND
PLACE THIS PROBE
ON E A CH EX PO SE D
ME T AL PA R T
ACVOLTMETER
(HAVING 1000 Ω/V,
OR MOR E SENSITIVITY)
11 . High voltage hold down circuit check.
Af ter rep ai r of th e high vol t ag e h ol d d ow n ci rcui t, th is ci rcu it
sh al l b e c hec ked to op er ate cor rectly.
See ite m "Ho w to check the high voltage hold down
cir cuit".
A V
This mark shows a fast
operating fuse, the
letters indicated below
show the rating.

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
4
FEATURES
"Titl e T EL E- TEXT br oa dca st of C1, C 2, T 1 , a nd T2 f or mu la i s r ece ivabl e.
"The voice multiplex function of the MTS system is built in.
"By t he THEATE R PRO f unct ion, a rea lit y to which it is viewing and listen ing in th e movie t he ate r c an be tas ted .
"By t he EZ S URF f unc tion, c h ann el ID a nd a prog ra m na me ar e di splaye d in the scr een au to ma tic al ly [ Only f or AV- 36 D50 3].
"By the COMPU LINK Ⅲfunction, operation interlocked with the DVD deck can be performed from remote control.
"By the three-linedigital comb filter, the refreshed image can be seen.
"Two p ro gram s ca n b e d is pl aye d on th e scr ee n b y th e 2 tun er PI P ci rcui t [O nly f or AV- 36 D50 3].
"Expr ession of a f avor ite screen can be ch osen b y the VIDE O STA TUS fu nction .
"A program can be enjoyed with a powerful sound by the HYPER SURROUND function.
"Si nc e th e V chip is bu ilt in, it c an cho ose, view a nd list en t o a h eal t hy pr o gram .
"The R ETU RN P LU S f unct i on is bu ilt in .
"A q uick f avor ite prog r am c an be look ed for b y th e HYP ER-SC AN fun cti o n.
"Si nce the co mp on ent sign al i np ut t er mi n al is e quip pe d, i t r ea pp ea rs di rect w ith out de ter ior a tin g the sign al fr om DVD.
FUNCTIONS
REMOTE CO NT ROL UNIT (RM-C251, RM-C252)
This illustration is written about RM-C251. There are no buttons of EZ SURF and PIP in the RM-C252.
VCR / DVD KEY
TV / CATV KEY
INPUT KE Y
DISPL A Y KE Y
SL EEP TIME R KE Y
HYPER SURROUND KEY
VIDEO STATUS KEY
THEATE R PRO KE Y
BB E KE Y
MUTING KEY
VOL U ME -/ + an d
CURS OR / KEY ( In t he ME NU screen )
ME NU KEY
POW E R KEY
CHANNEL NUMBER KEY
LIG HT KEY
V-CHI P K EY
CHANNEL +/－an d
CURSOR ▲/▼KE Y ( In th e M ENU scr ee n)
EX IT KE Y
VCR CONTROL KEY
EZ SURF KE Y [ Only f or RM-C251]
PIP CONTRO L K EY [O nly f or RM-C25 1]
20
2
1
3
4
5
6
7
8
9
10
11
12
13
21
14
15
16
18
17
19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
20 21

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
5
1 2 3 4 5 6 7 8
FRONT PANEL CONTROLS
①INPUT 3 VIDEO TERMINAL ⑥VOLUME －/+ KEY
②
INPUT 3 AUDIO L TERMINAL ⑦POWER KEY
③
INPUT 3 AUDIO R TERMINAL ⑧ON T IM ER / POWER LED
④
MENU KEY, CURSOR ▼KEY
⑤
CHANN EL －/+ KEYS
CURSO R / KEYS
REAR TERMINAL
1
2
3 4 6 5
①INPUT 1 TERMINAL (S-VIDEO, V, L, R)
②INPUT 2 TERMINAL (V, L, R )
③AUDIO OUTPUT TERMINAL
④AV COMPULINK ⅢTERMINAL
⑤ANTENNA TERMINAL
⑥INPUT2 COMPONENT SIGNAL TERMINAL (Y, PB
, PR)

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
6
MAIN DIFFERENCE LIST
PARTS NAME MODEL /Y /R /M
ITC TUBE
(Inc. DY, PC MA GNET,
WEDGE
)
A90AHH50X10/V/ A90AEJ15X01 A90LLD361X15
DEG C OIL CELD067-001JA
CELD067-001JA
or
QQW 0 136 -0 01
QQW 0 114 -0 01
or
QQW 0 106 -0 01
MAIN PWB SGE-1018A-M2 SGE-1019A-M2 SGE-1001A-M2
CRT SOCKET PWB SGE-3010A-M2 SGE-3011A-M2 SGE-3003A-M2
IP PWB SGE-4001A-M2
E-COAXIAL ASSY WJX0014-002A
CO NTROL KNOB LC2 021 7-00 5B- A
FRON T CA BI. ASSY LC1 064 2- 00 4C- A
DOO R LC2 040 9- 00 5B-A
REM OCON UN IT
AV-3 6D 503
RM-C25 1-1H
ITC TUBE
(Inc. DY, PC MA GNET,
WEDGE
)
A90AHH50X10/V/ A90AEJ15X01 A90LLD361X15
DEG C OIL CELD067-001JA
CELD067-001JA
or
QQW 0 136 -0 01
QQW 0 114 -0 01
or
QQW 0 106 -0 01
MAIN PWB SGE-1025A-M2 SGE-1026A-M2 SGE-1005A-M2
CRT SOCKET PWB SGE-3010A-M2 SGE-3011A-M2 SGE-3003A-M2
PIP PWB ×× ×
E-COAXIAL ASSY ×× ×
CO NTROL KNOB LC2 021 7-00 5B- A
FRON T CA BI. ASSY LC1 064 2- 00 4C- A
DOO R LC2 040 9- 00 5B-A
REM OCON UN IT
AV-3 6D 303
RM-C25 2-1H
ITC TUBE
(Inc. DY, PC MA GNET,
WEDGE
)
A90AHH50X10/V/ A90AEJ15X01 A90LLD361X15
DEG C OIL CELD067-001JA
CELD067-001JA
or
QQW 0 136 -0 01
QQW 0 114 -0 01
or
QQW 0 106 -0 01
MAIN PWB SGE-1025A-M2 SGE-1026A-M2 SGE-1005A-M2
CRT SOCKET PWB SGE-3010A-M2 SGE-3011A-M2 SGE-3003A-M2
PIP PWB ×× ×
E-COAXIAL ASSY ×× ×
CO NTROL KNOB LC2 021 7-00 1C- A
FRON T CA BI. ASSY LC1 064 2- 00 1H- A
DOO R LC2 040 9- 00 1D- A
REM OCON UN IT
AV-3 6D 203
RM-C25 2-1H

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
7
HOW TO IDENTIFY MODELS
How t o rec ogn i ze fr om th e ap p ear an ce of th e mo de l co ncer n ed is wr itt en b el o w. Pl e ase di st in gu is h f r om se ver al c ont ents cu rren tl y printed on
th e r at in g la be l.
Model Name Detailed Model Number
AV-36D503 /Y Y
AV-36D503 /R R
AV-36D503 /M
AV-36D503
M
AV-36D303 /Y Y
AV-36D303 /R R
AV-36D303 /M
AV-36D303
M
AV-36D203 /Y Y
AV-36D203 /R R
AV-36D203 /M
AV-36D203
M
Model Name
Detail ed Model Na me

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
8
SPECIFIC SERVICE INSTRUCTIONS
DISASSEMBLY PROCEDURE
REMOVING THE REAR COVER
"Unp lu g t he po we r pl u g.
1. As s hown i n Fig.2 , r em ove th e 12 screws marked !
!!
!.
2. Remove the rear cover toward you.
Note :
W hen r e insta ll ing th e re ar cover , c are fu lly pus h it i nwar d af ter
inserting the chassis into the rear c over groove.
REMOVING THE CHASSIS BASE
"After removing the rear cover.
1. Sl ight ly r aise th e b ot h s id es of th e ch assis b ase b y ha nd , and
remove the 2claws marked "
""
"( Fi g. 1 a nd Fig.2 ) u nde r th e b oth
sides of the chassis from the chassis rail.
2. As sho wn i n Fig .1, dr a w t he ch assis b ase b ackward alon g t he
chassis rail marked #
##
#in the arrow direction marked $
$$
$(Fig.2.).
(If necess ary, detac h the wire clamp, connec tor’s etc.)
Note :
W hen con du cting a c hec k with po we r sup plied , b e su re to conf irm
th at th e CRT ea rt h wire is c onn ect ed to t he CRT S OCKET P WB
an d t he MA IN PW B .
REMOVING THE T ERMINAL BOARD
"After removing the rear cover.
1. As s hown in Fig.2 , r emove th e 4screws marked%&
%&%&
%&.
2. W hen you pu l l ou t th e T E RMINAL BO AR D, it ca n b e r e mo ved .
REMOVING THE FRONT CONTROL PW BOARD
"After removing the rear cover and chassis base .
1. As s hown in Fig .2, r emove t he 2screws marked '
''
'att ach ed t he
FRONT CO NTROL PWB with the fron t cabinet.
2. Then remove th e FRONT CONTROL PWB.
REMOVING THE FRONT AV IN PW BOARD
"After removing the rear cover and chassis base.
1. As s hown in Fig.2 , remove t he 2screws marked (
((
(.
2. Then remove th e FRONT A V IN PW B.
REMOVING THE SPEAKER
"After removing the rear cover and chassis base.
1. As s hown in Fig.2 , r emove t he 4screws marked )
))
).
2. Follow th e s am e st eps wh en r emovin g t he oth er h and spe ake r.
CHECKING THE MAIN PW BOARD
1. To ch eck the ba cks id e of t he MA IN PW Boar d.
( 1) Pu ll ou t th e c hassis b ase . ( Refe r to RE MO VIN G THE
CHA SSIS BA SE) .
(2) Erect the chassis vertic ally so that you can easily chec k from
the backside of the MAIN PWB.
CAUTION
"W hen e r ecting th e chass is, be c ar efu l so t hat the r e wil l b e n o
con tact in g wi th ot her P W B.
"Be for e tu rn ing o n po w er, ma ke sure th at th e C RT e ar th wir e and
oth er co nn ecto rs ar e p ro perly co nn ecte d.
WIRE CLAMPING AND CABLE T YING
1. Be sure t o clamp the wire.
2. Never r emo ve th e c abl e tie use d f or tying th e wire s to ge the r.
Sh oul d it be in adve rt ent ly r emove d, be su r e t o t i e the w ir es wi th
a n ew c abl e tie.
CHASSIS BASE
Fig. 1
C
B
FRONT CABINET
MAIN PWB

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
9
FRONT CABINET CRT
SP EAKE R
CLAW
FRONT AV I N PWB
CRT SOCKET PWB
POWER CORD
FRONT CONTROL PWB
SP EAKE R
CLAW
AV SE L PW B
PIP PWB
[ Only for A V -3 6D50 3] TERMINAL BOARD
HV T
CHAS SIS BASE
REAR COVER
MAIN PWB
H
H
F
G
B
BD
E
A
Fig.2
This ill ustr a ti on de scrib es ab out A V- 36 D5 03 .
Al th ou gh t he AV- 3 6D30 3 a nd AV - 36D2 03 a r e
sl ig htl y di ff er ent fr om t his i llus tr ation , i t can u se for
AV -3 6D30 3 and AV- 36 D20 3 i n t he s am e s tep s as
this illustration.
No te

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
10
MEMORY IC REPLACEMENT
1. Memory IC
This model uses the memory IC.
This m emor y IC st or es d at a f or pr op er o per a tion of the vide o/ch ro ma a nd d eflectio n cir cui ts.
W hen r ep la ci ng, be sure to use th e IC c ont ai nin g ini tia l se tting d ata .
2. Memory IC replacement procedure
(1) Power off
Sw itch off th e p ow er an d di scon nec t th e p ow er plu g f rom t he AC ou tle t.
(2) Replace the memory IC
Be sure to use the memory IC written with the initial setting values.
(3) Power on
Con nect th e p ower pl u g t o th e AC ou tl et an d switch on th e p ow er.
(4) System constant check and setting
①
Press the SLE EP TIMER ke y and se t SL EEP TIMER f or 「0 min
」.
②
Be for e di sa pp ear t he di spl ay of SL EEP TIM ER sett i ngs, si mu ltan eo usly
pr ess th e DISPLAY ke y and VI DE O ST ATUS key of the remote control unit.
The SERVICE MENU screen of Fig.1 will be displayed.
③
While the SERVICE MENU is displayed, select the SYSTEM(SYS) item
wi t h CURSOR ▼/▲key an d g o in to wi th / keys. Th en t he S YSTE M
mode screen will be displayed as shown in Fig.2.
④Refe r to t he ta ble of SY STEM CO N STAN T given in pa ge la ter , an d ch eck
th e eac h item . If the valu e is diff er en t, s el ect t he setti n g it em wi th th e
CURSOR ▼/▲ke y, an d s etti n g wit h t he CURSOR / keys. (The letters
of the selec ted item is displayed in yellow.)
⑤W hen a djust me nt h as c om plete d, the va lues st or e int o m emory IC
automatically.
⑥
Press the EX IT key twic e t o return to the n ormal screen.
(5) Receiving channel setting
Refer to the OPERATING INS TRUCTIONS and set th e rece ive
channels (Channels Preset) as described.
( 6) U ser se ttings
Check t he us er se tting it em s accordin g to th e T a ble 2 given in pag e
later.
W here th ese d o not a gree , r efe r to the O PER AT ING
IN STRUCT ION S an d s et t he i tem s as desc rib ed.
(7) SERVICE MENU setting
Ve rif y w h at to se t i n t he SER V IC E M EN U, and s et w h at ever i s
n ecessary (Fig.1 ). Ref er to th e SE RV ICE A DJUSTMENT f or set ting.
SE RV ICE MENU
SERVICE MENU
1.V/C(S) 2.DEF(D)
3.SOUND(A) 4.OTHERS
5.PIP(PIP) 6.3L Y/C(LYC)
7. LO W LI G HT 8. HIG H LI G HT
9.RF AFC 10.VCO
11.I2C BUS 12.SYSTEM(SYS)
SELECT BY
OPERATE BY EXIT BY EXIT
Fig.1
12 . SY STE M (SY S) MODE
***
SYS0 1 VIDEO
Fig.2
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
EXIT from
SY STEM mod e
Al th ou gh t hi s i llus tration of r e mo te c ont ro l unit is w ri tten ab ou t
RM-C251 (AV-36D503), it can use for operating RM-C252 (AV-
36D303, 203) as same key assignment.
②
Si multa neo usl
y
p
ush
③
Go into the item
④
Setting the value
③, ④
Se le ct t he it em
①
Setting for “0 min”

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
11
VALUES OF SYST EM CONSTANT (TABLE 1)
INITIAL SETTING VALUE
ITEM CONT ENTS VARIABLE RANGE
AV-36D503 AV-36D303, 203
SY S01 VIDEO IN 0～433
SY S02 PIP 0～110
SY S03 3D Y/ C 0～100
SY S04 Y CV 0～111
SY S05 CCD PCHK 0～111
SY S06 PURITY 0～100
SY S07 VM 0～100
SY S08 NOISE CR 0～100
SY S09 CLR TEMP 0～111
SY S10 THEATE R 0～111
SY S11 THEATE R PRO 0～111
SY S12 BB E 0～111
SY S13 HYP SURR 0～111
SY S14 16 :9 MD 0～100
SY S15 HYP S CA N 0～111
SY S16 EZ SUR F 0～110
SY S17 ID D ISP 0～111
SY S18 COMP ULINK 0～111
SY S19 CCD 0～111
SY S20 VCHIP 0～111
SY S21 VCHIP CA 0～111
SY S22 JVC L OGO 0～111
SY S23 CMP IN 0～111
SY S24 CXA1 87 5 0～10 0

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
12
VALUES OF USER SETTING ITEMS (TABLE2)
Setting of switches on fr ont panel and remote control unit
ITEM INITIAL SETTING VALUE ITEM INITIAL SETTING VALUE
POW E R OFF DISPL A Y OFF
CHA NNE L CABL E C H- 02 VIDEO STATUS DYNAM IC
VOLUME 10 PIP SOURCE CABLE CH-04 [Only AV-36D503]
INPUT TV PIP POSITION L eft lower side [ Only A V-36D503]
HYPE R S URROUND OFF SL EEP TIME R 0
BB E ON
Setting of MENU scr een
PICTURE ADJUST INITIAL SETUP
TINT CENTER LANGUAGE ENG
COLO R CENTER FRONT PANEL LO CK OFF
PICTURE +8 V2 COMPONENT-IN NO
BRIGHT CENTER AUTO S HUT O FF OFF
DETAIL +10 XDS I D ON
COLOR TEMPERATURE HIGH CLOSED CAPTION OFF
NOISE MUT ING ON CAPTIO N : CC1
TEXT : T1
SOUND ADJUST AUTO TUNER SET UP TUNER MODE : CABLE
BA SS CENTER CHA NNE L S UMM ARY U nn ecess ary to set
TREBLE CENTER V-CHIP OFF
BALANCE CENTER SET US TV RATINGS ALL CLEAR
MTS STEREO SET MOVIE RATINGS ALLCLEAR
CLOCK / TIMERS SET CANADIAN RATINGS ENG ALL CLEAR
MANUAL SET CANADIAN RATINGS FRE ALL CLEAR
TIME ZONE : PACIFIC UNRATED VIEW
SE T CL OCK
D.S.T : OFF SET LOCK CODE “0000”
ON/OFF TIMER OFF

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
13
SERVICE ADJUSTMENTS
BEFORE STARTING SERVICE ADJUSTMENT
1. There are 2 way of adjusting this TV : One is with the r emote
control unit and the other is the conventional method using
adjustment parts and components.
2. The adjustment with the REMOTE CONTROL UNIT is made
on the basis of the initia l setting v alues. The setting values
which adjust the screen to its optimum condition may differ
from the initia l s etti ng v al ues.
3. Make s ure th at conn ect ion is c orrect ly made t o AC p ower
sourc e.
4. Turn on t he p ower of th e se t an d eq uipm en t bef or e us e, an d
sta rt t he ad ju stm en t proc edur e s af ter w aitin g at least 30 min ute s.
5. Unless ot her wise spec if i ed, p r ep ar e th e mo st suita bl e r ec epti o n
or inp ut si gn al for adj ust m ent.
6. Never t ouc h an y ad justm en t p art s, wh ich a r e n ot sp ecif ie d in th e
list for t his adjustment VRs, transforms, condensers, etc.
7. Pr ep arati o n f or ad justm en t
Unless otherwise specified in the adjustment instructions, preset
the following functions with the REMOTE CONTROL UNIT.
User menu preset value
MENU ITEM PRES ET V ALUE
VIDEO STATUS STA NDARD
TINT, COLOR, PICTURE
BRIGHT, DE TAIL CENTER
NOISE MUTI NG OFF
COLOR TEMPERATURE LOW
PIP [Only for A V-36D5 03] OFF
BA SS, TREB LE , BA LA NCE CENTER
H YPE R S U RR OU N D OFF
MTS STEREO
MEASURING INSTRUMENT AND FIXTURES
1.DC voltmeter (or digital voltmeter)
2.Oscilloscope
3. Sign al g en er at or (P att er n g en er at or) [ NTS C]
4.Remote control unit
5. T V a ud io m ultiple x sign al ge ne r ator
6. F requ enc y cou nte r
ADJUSTMENT ITEMS
BASIC ADJUSTMENT
!Check of B1 power supp l y
!MAIN / SUB VCO adjustment
!RF AGC ad ju stm ent
!FOCUS adjustment
DEFLECTION CIRCUIT ADJUSTMENT
!V. CE NTE R / V SIZE ad ju stment
!H SIZE / H POSITION / SIDE PINCUSHION adjustment
VIDEO / CHROMA CIRCUIT ADJUSTMENT
!WHITE BALANCE adjustment ～LOW LIGHT ～
!WHITE BALANCE adjustment ～HIGH LIGHT～
!SUB B RI GHT ad justment
!SUB CONTRAST adjustment
!SUB COLOR adjustment
!SUB TI NT adjus tment
PIP CIRCUIT ADJUST MENT
!WHITE BALANCE adjustment ～HIGH LIGHT～
!DISPL A Y POS ITION a djust me nt
MTS CIRCUIT ADJUSTMENT
!IN PUT LE VE L ch eck
!SE PARATIO N adju stm ent

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
14
ADJUSTMENT LOCATIONS
FRON T
FRON T
UPPER : FOCUS
LOWER : SCREEN
FRONT CONTROL PWB
FR
O
NT
POWER ME N UVOL CH
IC7701
CN7007 F
FRONT AV IN PWB
CN001
CN007
AV SELECTOR PWB
B1
1
3
HV
E1
CRT EARTH
(BRA ID ED AS S'Y)
U
HVT
HVTHVT
HVT
IC702
SS
T
T111
S421
IC201
CN004
MAIN PWB
PI P PWB
[
On l
y
for AV-36D503
]
CN002
IC101
PW
F901
DEG.
MEMORY IC
CN003
TUNE R
TUNE R
FUS E
FUS EFUS E
FUS E
V CENTER SW
V CENTER SWV CENTER SW
V CENTER SW
VCO
VCOVCO
VCO
1:TP-91(B1)
2:NC
3:TP -E ( )

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
15
TOP
CR T EART H
(BR AIDEDASS'Y)
CRT SOCKET PWB
(
SOLDER SI DE
)
TP-E( )
CN 300 5
CN 30E2
CN 300 4
PIP PWB
[
Onl
y
for AV-36D503
]
IC41 01
T411 1
TOPFRONT
TP-G
TP-R TP-B
TUNER
SUB VCO
SUB VCOSUB VCO
SUB VCO

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
16
BASIC OPERATION OF SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. SERV ICE MENU ITEMS
W ith th e S ER VIC E ME NU, var ious ad ju stm ent s can b e m ad e, an d th ey ar e b r oad ly cl assi fied i n th e f ollow ing item s of a dj ust me nts.
(1) V/C(S)･･･････ ･････････････ ････････････ ･VIDEO / CHROMA related circuit adjustment mode
(2) DEFLECTION(D) ･･･････ ･････････････ ･･･DEFLEC TIO N r e late d cir cuit adj u stme nt m od e
(3) SOUND(A) ･･･････ ･････････････ ･････････SOUND related circuit adjustment mode
(4) OTHERS(F) ･･･････ ･････････････ ････････Whole system related items adjustment mode
(5) PIP(PIP)[Only for AV-36D503] ･･･････ ････PIP r elat ed c ircuit ad ju stm ent m od e
(6) 3L Y/C(LYC) ･･･････ ･････････････ ･･･････3 l in e YC s epa r ati on r elat ed c ir cu it ad j ustm en t m od e
(7) LOW LIGHT ･･･････ ･････････････ ･･･････W hite bal a nce of “LO W LIG HT ” ad ju stm en t mod e
(8) HI GH LIGHT ･･･････ ･････････････ ･･･････W hite bal a nce of “HIGH L IGH T” a dj ustm e nt mo de
(9) RF AFC ･･･････ ･････････････ ･･･････････ R F AFC r elat ed cir cui t a djust m ent mo de
( 10) VCO ･･･････ ･････････････ ････････････ ･･VCO re lated circuit a djust ment mode
( 11) I2C BUS ･･･････ ･････････････ ･･･････････ I2C bu s r elat ed ci rcuit ad ju stm en t m od e [Fixed on]
( 12) SY STEM(SY S) ･･･････ ･････････････ ･････Thi s m od e i s u sed w he n s etting up th e wh ole s ys tem .
3. BASIC OPERATION OF SERVICE MENU
(1) How to enter SERVICE MENU
Press the SLE EP TIMER key and set the SLE EP TIM E R for
[0 MIN].
The n pr ess th e DI SPLAY key an d th e VI DE O ST AT US key of the
remote control unit simultaneously, and the SERVICE MENU
screen will be displaye d as shown below.
(2) Selection of SUB MENU SCREEN
In SERVI CE MENU, press th e CURSOR ▲
▲▲
▲/▼
▼▼
▼key to select any of
th e SU B ME NU i te ms. (Th e l ett er s of th e select ed i t ems ar e
displayed in yellow)
If an ite m like to set u p bec omes yellow, the CURSOR / key
will be pushed and it will go into the mode.
SERVICE MENU
1.V/C(S) 2.DEF(D)
3.SOUND(A) 4.OTHERS
5.PIP(PIP) 6.3L Y/C(LYC)
7. LO W LI G HT 8. HIG H LI G HT
9.RF AFC 10.VCO
11.I2C BUS 12.SYSTEM(SYS)
SELECT BY
OPERATE BY EXIT BY EXIT
SE RV ICE MENU
CURSOR ▲/▼key
Select 1.V/C(S)～12 .S YSTEM(SYS)
1.V /C (S)
2. DEF (D)
11 .I 2 C BUS
12.SYSTEM(SYS)
CURSOR / key
Go into eac h S UB MENU
SOUND
DEFLECT IO N
VIDEO /C HRO MA
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
EX IT
Al th ou gh t hi s i llus tration of r e mo te c ont ro l unit is w ri tten ab ou t
RM-C251 (AV-36D503), it can use for operating RM-C252 (AV-
36D303, 203) as same key assignment.
②
Si multa neo usl
y
p
ush
③
Go into the item
④
Setting the value
③, ④
Se le ct t he it em
①
Setting for “0 min”

No. 51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
17
(3) Method of Setting
For example, the operation in the case of s etting up VIDEO/CHROMA is expressed below.
(4) Others [Only for AV-36D503]
If go in to th e 9. RF A F C an d 1 0. VCO item s, the re will b e di splay t he RF AF C M AIN scre en and VCO MA IN scr een .
Then press the CURSOR / key, the RF AFC SUB screen and VCO SUB screen is displayed.
RF 4 : 3 STD LOW
S01 B RIGHT ***
******
***
S02 PI CTUR E ***
******
***
S03 C OLOR ***
******
***
S04 TI NT ***
******
***
CURSOR ▲/▼ key
Se le ct t he it em s fr o m
S01 t o S10.
CURSOR / key
Increment or decrement
th e a djust me nt va l ue
ITEM CONT ENTS
S01 BRIGHT
S02 PICTURE
S0 3 COLO R
S04 TINT
S05 DETAIL
S06 BRIGHT +-
S07 PICT +-
S08 COLO R +-
S09 TINT +-
S10 DETAIL +-
EX IT key
Return to t he SERVICE
ME NU MA IN
9.RF AFC SUB
10.VCO SUB10.VCO MAIN
9.RF AFC MAIN MODE
T
U
N ER
SU
B
HI GH LE VEL
REFE REN CE LEVEL
LOWLE VEL
SYN C NO
TOO HIGH GOOD TOO LOW
TUN ER SUB
AFC ON
FINE
TOO HIGH GOOD TOO LOW
TUN ER MA IN
AFC ON
FINE ** **
T
U
N ER
SU
B
HI GH LE VEL
REFE REN CE LEVEL
LOWLE VEL
SYN C NO
CURSOR / key
CURSOR / key

No. 51948
A
V-36D503
A
V-36D303
A
V-36D203
18
BR IGH T
SERVICE M ENU (M AIN MENU)
2.DEF (D)
9.RF AFC SUB [Only f or AV-36D503]
10.VCO SUB [Only for AV-36D503]
7.LOW LIGHT
10.VCO MAIN
12.SYSTEM(SYS)
3.SOUND( A)
4.OTHERS(F)
11.I2
C BUS
[Do n ot adjust ]
1. V/ C ( S)
8.HIGH LIGHT
9.RF AFC MAIN MODE
5.PIP(PIP) [Only for AV-36D503]
1 .V /C (S ) 2 .D EF( D )
3.SOUND(A) 4.OTHERS(F)
5.PIP(PIP) 6.3L Y/C(LYC)
7.LOW LIGHT 8.HIGH L IGHT
9.RFAFC 10.VCO
11.I2C BUS 12.SYSTEM(SYS)
SELECT BY
OPE RA TE B Y EX IT BY EX IT
R F 4 : 3 S T D LO W
***
SE RV IC E MEN U
D01 V FREQ
R F 4 : 3 S T D LO W
S01 BRIGHT
***
A 01 IN LE VEL ***
F01 OSD POSI ***
PIP01 BRIGHHT ***
6.3L Y/C(LYC)
[Do n ot adjust ]
LYC01 MODE ***
***SY S01 VI DE O
TU NE R M AI N
HI G H LE VE L
RE F E REN C E L EV EL
LOW L EVE L
SY NC N O
TU NE R S UB
HI G H LE VE L
RE F E REN C E L EV EL
LOW L EVE L
SY NC N O
***
***
TOO HIGH GOOD TOO LOW
TU NE R SU B
AF C ON
FI NE
TOO HIGH GOOD TOO LOW
TU NE R M AI N
AF C ON
FI NE **
I2C B US ON
**
***
*** ***
***

No.51948
A
V-36D50
3
A
V-36D30
3
A
V-36D20
3
19
INITIAL SETTING VALUE OF SERVICE MENU
1. Ad
j
ustment of the SERVICE MENU is made on the basis of the initial settin
g
values
;
h owev er
,
the new settin
g
values which
set the screen in its optimum condition may differ from the initial setting.
2. Do no t c hange the initial setting v alues not li sted in “ ADJUSTMENT”.
V / C(S) MODE
RF S-VI DE O
COMPOSITE VI DE O
No . Setting item Variable range
STANDARD THEATER STANDARD
S01 BRIGHT 0～127 64 --- ---
S02 PICTURE 0～127 55 --- ---
S0 3 COLO R 0～127 55 --- ---
S04 TINT 0～127 64 --- ---
S05 DETAIL 0～63 37 --- 35
S06 BRIGHT +- -32～+32 --- +1 -2 [503] / ±0 [30 3, 203 ]
S07 PICT+- -32 ～+32 --- -10 ±0
S08 COLO R +- -32 ～+32 --- -3 -2
S09 TINT+- -32 ～+32 --- -3 +2
S10 DETAIL+- -32 ～+32 --- ±0---
COMPONENT INPUT / STANDARD
No. Setting item Variable ran
g
eAV-36D503 /Y
AV-36D303 /Y
AV-36D203 /Y
AV-36D503 /R
AV-36D303 /R
AV-36D203 /R
AV-36D503 /M
AV-36D303 /M
AV-36D203 /M
S0 3 COLO R 0～127605649
S04 TINT 0～127647269
S05 DETAIL 0～63 40 40 40
S06 BRIGHT +- -32～+32 -1 [5 03] / -3 [303, 203] -1 [503] / -3 [3 03, 203] -1 [5 03] / -3 [303, 203]
S07 PICT+- -32 ～+32 ±0±0±0
RF / S -VI DE O / COMPOSITE VI DE O COMPONENT INPUT
STANDARD THEATER STANDARD THEATERNo . Setting item Variable range
LOW HI GH LOW HI GH LOW HI GH LOW HI GH
S11 R CUT OFF 0～2 55 30 - -- - -- - -- - -- - -- - -- - --
S12 G CUT OFF 0～2 55 30 - -- - -- - -- - -- - -- - -- - --
S13 B CUT OFF 0～2 55 30 - -- - -- - -- - -- - -- - -- - --
S14 R DRI VE 0～1 27 64 - -- - -- - -- - -- - -- - -- - --
S15 B DRIVE 0～1 27 64 - -- - -- - -- - -- - -- - -- - --
S16 R CUT+ - - 128 ～+1 27 - -- ±0±0±0 -10 --- --- ---
S17 G CUT+- -128～+1 27 - -- ±0±0±0±0 - -- - -- - --
S18 B CUT+- -128～+1 27 - -- ± 0±0±0 -10 --- --- ---
S19 R DRV +- -128 ～+1 27 --- +5 +13 +7 ±0 - -- - -- - --
S20 B DRV+- -128～+127 --- +6 -25 - 9 ±0 - -- - -- - --
S2 1 NTSC MA T 0 ～3 33112211
S2 2 BL ACK S T 0 ～3 1 --- 1 --- --- --- --- ---
S2 3 DCRE ST 0 ～1 1 --- 1 --- --- --- --- ---
S24 DCRSW 0～1 1 --- 1 --- --- --- --- ---

No.51948
A
V-36D503
A
V-36D303
A
V-36D203
20
No . Se tt in
g
ite m Va riabl e ra nge RF S-VI DE O
COMPOSITE VI DE O COMPONENT INPUT
S2 5 AS Y SHR P 0 ～7544
S2 6 BP F FO 0 ～10 0 ---
S27 KILR OFF 0～10 0 ---
S28 KIL R SEN 0 ～11 1 ---
No . Se tt ing item Variabl e ra nge Init ial se tting v al ue No. Setting ite m Variabl e ra nge Initial se tting v al ue
S29 RGB MUTE 0～10S39YMUTE0～10
S30 BLUE B 0 ～ 1 0 S40 SV M G AIN 0～ 30
S31 VIDEO SW 0～ 3 3 S4 1 SV M PH 0 ～ 30
S3 2 C MP AB CL 0 ～ 1 0 S42 WPL 0～ 10
S3 3 OSD AB L 0 ～ 1 0 S43 COL GMM 0～ 10
S34 OSD CONT 0～63 10 S44 V1 GAIN 0～ 74
S35 SUB CONT 0～15 8 S45 AGC ADJ 0
～127 63
S36 AB L GAIN 0～ 3 0 S46 VMOFF DE -128～+127 ±0
S37 ABLPNT 0～ 33S47APCCLK0
～
11
S3 8 Y G AM MA 0 ～ 31
SOUND MODE
No . Se tt ing ite m Variabl e ra nge Initial set ting v al ue No . Se tting ite m Va riabl e ra nge Initial setting v al ue
A0 1 IN LE VEL 0～1 5 10 A04 SA PC 0 / 1 0
A02 LOW SEP 0～6 3 32 A0 5 BB E BA SS - 128～+127 +3
A0 3 H I SE P 0～6 3 32 A0 6 BB E TRE - 128～+127 -4
3L Y / C MODE (Do not adjust)
No. Va riabl e ra nge Init ial setting v al ue No . Variabl e range Initial set ting v al ue
LYC01 0～74 LYC070～11
LYC02 0
～71 LYC080 ～
30
LYC03 0～10 LYC090～11
LYC04 0
～10 LYC100 ～
10
LYC05 0
～15 2 LYC11 0～
10
LYC06 0
～10 LYC120 ～
10