JVC RM-C326 User manual

No.52005
Jun. 2002
AV-27F703
AV-27F713
AV-27F803
1COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Jun. 2002
AV-27F703/S
AV-27F713/S
AV-27F803/S
CONTENTS
!SPECIFICATIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････････････
･･････････････････････････････････････････････････････････
･････････････････････････････ 2
!SAFETY PRECAUT IONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 3
!FEATURES････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････
･･････
･･･ 4
!HOW TO IDENTIFY MODELS ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････
････････････････････････････････････････
････････････････････ 4
!MAIN DIFFERENCE LIST ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 5
!FUNCTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･････････････････････････････････
････
･･ 6
!SPECIFIC SERVICE INSTRUCTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････
･･････････････････････････
･････････････ 8
!SERVICE ADJUSTMENTS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････
･･････････････････････････････････････････
･････････････････････ 12
!PARTS LIST ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････
･･
･33
★OPERATING INSTRUCTIONS
★STANDARD CIRCUIT DIAGRAM ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････
････････････････････････････････
････････････････2- 1
SERVICE MANUAL
COLOR TELEVISION
BASIC CHASSIS
GJ
[RM-C325G]
AV -2 7F80 3
RM-C 32 6G
RM-C326
AV -2 7F70 3
AV -2 7F71 3
(No.A111)

No.52005
A
V-27F703
A
V-27F713
A
V-27F803
2
SPECIFICATIONS
Items Conte nts
Dimensions (W×
××
×H×
××
×D) 29 - 7/8 ”×23”-3/8” ×19-3/4” (758mm×59 3m m×5 00m m)
Mass 94.6 Ibs (43.0 kg)
TV System
and Color S yste m
TV RF System
Color Sy st em
Sound System
CCIR(M)
NTSC
BTS C S ystem ( Multi-Ch an nel S ou nd )
TV Receiving Channels
and Frequency
VL Ba nd
VH Band
UHF Band
(02～0 6) 54 MH z ～88MHz
(07～1 3) 17 4M Hz～21 6M Hz
(14～6 9) 47 0M Hz～80 6M Hz
CATV Receiving Channels
and Frequency
Low Band
High Band
Mid Band
Super Band
Hy per Ba nd
Ul tr a B an d
Sub Mid Band
(02～06, A-8) by (02～06 &0 1)
(07～13) by (07～13)
(A～1) b y (14～22)
(J～W) by (23～36)
(W +1～W + 28) b y (3 7～64 )
(W +29 ～W + 84) b y ( 65 ～1 25)
(A8, A4～A1) by (01, 96～99 )
TV/CATV Total Channel 18 0 C ha nn els
Interme diate Fr equency Vide o IF Car rier
Sound IF Carrier
45 .75 MHz
41.25MHz (4 .5MHz)
Color Sub Carrier 3.58MHz
Power Input 12 0V AC , 6 0Hz
Power Consumption 14 0W
Picture Tube 27 ” ( 6 8cm ) M ea sured Di ag on ally
Hi g h Vo lt age 30 .0 kV±1.3kV (at zero beam current)
Spe ake r 2“×4 -3/ 4” ( 5×12 cm ) Oval t yp e×2
Au dio Power Output 5W + 5W
Input 1 (Rear) S-Video
Vide o
Au dio (L/MONO, R)
Y : 1V (p -p ) P osit ive (Neg ative s ync p rovi de d, w h en ter mi nat ed with 75 Ω)
C : 0 .28 6V (p-p) (B ur st sig nal , wh en te rm ina ted with 7 5 Ω)
1V (p- p ), 75 Ω
50 0m V(r ms) ( -4d Bs ), Hi gh Impe da nce
Input 2 (Rear) Video
Component video
Au dio (L/MONO, R)
1V p- p, 75 Ω
Y: 1 V( p-p) P ositive ( Neg ative sync pr ovide d, wh en term ina ted w ith 7 5Ω)
PB, P
R: 0.7V(p-p), 75Ω
50 0m V(r ms) ( -4d Bs ), Hi gh Impe da nce
Input 3 (Front) Video
Au dio (L/MONO, R)
1V (p -p ), 75 Ω
50 0m V(r ms) ( -4dB s ), Hi gh Impe dan ce
Input terminals
Input 4 (Rear) (For AV-27F8 03)
Component video
Au dio (L/MONO, R)
Y: 1 V( p-p) P ositive ( Neg ative sync pr ovide d, wh en term ina ted w ith 7 5Ω)
PB, P
R: 0.7V(p-p), 75Ω
50 0m V(r ms) ( -4d Bs ), Hi gh Impe da nce
Fix Audio Output 50 0m V(r ms) , ( -4d Bs ), LOW Im pe da nce ( 400 Hz whe n mod ula ted 10 0%)
AV compulink Ⅲ
ⅢⅢ
ⅢInput 3.5 m m mi ni j ac k
An ten na terminal 75 Ω(VHF/UHF) Terminal, F-Type Connector
Remote Control Unit RM-C 32 6G( AV- 2 7F7 03) / RM-C 32 6(AV- 27 F71 3) /RM- C32 5G (AV - 27F8 03 )
( AA/R 6 /U M- 3 bat tery×2)
Design & sp eci fications ar e su bje ct to change wi thou t notice.
(54MHz～80 4M Hz)

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
3
SAFETY PRECAUTIONS
1. The d esign of t hi s p ro du ct c ont ains spec i al h ar dwar e, m an y
circu it s a nd co mp on ent s s pecial ly for saf ety pur p oses. For
continued protection, no changes should be made to the
or igina l des ig n u nless a uth or ized in wri ti ng by t he man uf actu re r.
Rep lacem en t par ts m ust be i d ent ic al t o t hos e u sed in th e
or igina l cir cuit s. S er vic e sho ul d be per f or me d b y qu al ified
p ers onn el o nl y.
2. Al te r ation s of th e desig n o r circu itr y of th e p rodu cts s hou l d n ot
b e m ad e. A ny de sign alte ra tions o r ad ditio ns wi ll vo id th e
manufacturer's warranty and will further relieve the
m anu fact ur er of r esp ons ib ilit y f or pe rs ona l in ju r y or p rope rt y
d am age r esu lt in g t her ef r om .
3. M an y e l ectr ical an d m ech an ic al pa rt s in th e p rodu cts h ave
sp ecial saf ety-r elat ed c har act eris tics. Th ese charac teristics are
oft en n ot e vi d en t fr om visu al in spe ction no r can t he pr ote ction
aff or de d by th em n ecess aril y be o bta in ed b y usi ng
r eplac em ent co mp on ent s ra ted for h ig her vo ltag e, w a ttag e, etc.
Rep lacem en t pa rt s wh ic h h ave t hes e sp ecial s afet y
ch ar acter istics a re i d entifi e d in th e par ts list of S ervice m an ua l.
Electrical components having such featur es are identified
by shading on the schematics and by (!
!!
!) on the parts list
in S ervice manual . Th e u se of a su bst itu te re plac em en t whi ch
does not have the same saf ety charact eristics as the
r eco mm en de d re plac em en t pa rt sho wn i n the pa rts l ist of
Se rvice ma nu al may c aus e sh ock, f ir e, or o th er haz ards.
4. Use iso la t ion tr an sforme r when hot c hass is .
The chassis and any sub-chassis contained in some products
ar e c on nect ed to on e si de of th e AC p ow er l ine . An i sola tion
tr ansf or m er of ad equ ate cap aci ty sh ou ld be inser t ed bet we en
th e p r odu ct and t he AC p ower su pp ly p oi nt w hil e p er for ming
an y ser vice on so me pr o ducts wh en th e HOT ch assis i s
exp ose d.
5. Do n't short between the LIVE side ground and ISOLATED
(NEUTRAL) side ground or EARTH side ground when
repairing.
So m e m od el's p ow er c ir cuit is par t ly di f feren t in t he GND . Th e
diff er enc e of t he GND is sh own by th e LI VE : (") side GND,
th e ISO LATED( NEUTRA L) : (#) sid e GND an d EARTH : ( $)
side GND . Don 't sho rt be tw ee n t he LIVE sid e GN D a nd
ISO LATE D(NEUTRAL) side GND or EARTH side GND a nd
never measure with a meas uring apparatus (oscilloscope etc.)
th e LI VE side GND a nd ISO LATED(NEUTRA L) sid e G ND or
EARTH side GND at the s ame time.
If above note will not be kept, a fuse or any parts will be brok en.
6. If an y re pa ir h as b ee n m ad e to th e ch assi s, it is re comm end ed
th at t he B1 se ttin g sh ou ld b e chec ked or ad juste d (S ee
ADJUSTMENT OF B 1 POW E R SUPPL Y).
7. The hi g h vol t ag e a pp lied t o th e pictu re tu be mu st co nfo rm with
that specified in Service manual. Excessive high voltage can
cau se an i ncr ea se in X-Ra y em issi on , a rcin g and p ossi ble
com po ne nt d am ag e, th eref or e op er atio n un der excess ive hi gh
volta ge c ond it i ons sh ou ld be ke pt to a m in imu m, or sh ou l d be
pr eve nt ed. I f seve re arc in g occu rs, r emove th e AC p ow er
immediately and determine the cause by visual inspection
( in cor r ect insta lla tion , cr ac ked o r m elte d hi gh voltag e h ar ness,
p oor s ol de ri n g, etc. ). T o ma in ta in the pr op er minim um le vel of
soft X-Ray emission, components in the high voltage circuitry
includ ing the pictu re tu be mu st be the exa ct rep l acemen ts or
alte rn at i ves a ppr o ved b y th e ma nuf actu rer of th e co mp lete
pr od uct.
8. Do n ot c hec k hi gh vol ta ge by d r awin g a n ar c. U s e a high
volta ge m ete r or a h i gh vol t age p ro be w ith a VTVM. Di sch ar ge
th e p ictu r e tu be bef or e a tte mp ti ng me ter co nne ction , b y
con nec ting a clip lead t o th e grou nd frame a nd con n ecting t he
oth er e nd of t he l ead th r oug h a 10 kΩ2W resist or to t he ano de
bu tto n.
9. W hen se rvi ce is r equ ir ed, ob ser ve th e o ri g in al lea d dr ess.
Extr a p r ecau ti on sh ou l d be given t o assu r e cor re ct lea d dr es s
in the h i gh volta ge c ircu it area . W her e a sh ort ci rcui t ha s
occu rre d, th ose c omp on en ts th at ind ic ate evi den ce of
overheating should be replaced. Always use the
m anu fact ur er 's r eplace m ent com p on ents.
10 . Isolation Check
(Safety for Electrical Shock Hazard)
Af ter r e- a ssem bli ng th e pr od uct , al ways pe rf or m an i so l ati on
ch eck on th e expo sed m eta l p ar ts of th e c abi n et ( ant en na
ter m ina ls, vi de o/a ud i o in pu t and out put t er min als, Con trol
knobs, metal cabinet, screwheads, earphone jack, control
sh afts, etc.) to be sur e th e pr o duct is saf e t o op er at e w ith out
d ang er of elect rica l shoc k.
(1) Dielectric Strength Test
The is ol at io n b etw e en the AC pr ima ry cir cu it and al l meta l par ts
exp ose d t o th e us er , part icu lar ly an y expo sed m etal p ar t h aving
a return pat h to the ch assis sh ou ld withst and a volta ge of
11 00V AC ( r .m .s.) f or a p er iod of on e sec ond .
(. . . . Withs tand a voltage of 1100V A C (r.m. s.) to an appliance
r ate d up to 1 20V , a nd 3 00 0V AC (r .m. s.) t o an ap pl ianc e r a ted
200V or more, for a periodof one second.)
Thi s m eth od of test r e qu ir es a t est eq ui p me nt n ot g en er all y
fou nd i n t he ser vice t ra de.
(2) Leakage Current Check
Plug t he A C line c or d dir ect ly int o th e AC outlet (do not use a
lin e is ol ati on tra nsf ormer dur ing t hi s che ck.) . U sing a "L eaka ge
Cur rent Test er ", m ea sure t he l ea kag e cur r en t fr om each
exp ose d meta l par t of th e ca bi ne t, p ar tic ular ly an y expo sed
metal part having a return path to the ch assis , to a kn own good
ea rt h gr o und ( wa ter p ipe, etc.) . A ny l ea kag e cur ren t m ust not
exce ed 0. 5m A AC (r.m. s.).
Howeve r, i n t ro pical a r ea, this m ust no t e xc eed 0 .2m A AC
(r.m.s. ).
"
""
"Alte rnat e Che ck M ethod
Plug t he A C line c or d dir ect ly int o th e AC outlet (do not use a
line isolation transformer during this check.). Use an AC
voltmet er h aving 100 0 o hm s per volt or m or e sen si ti vit y in the
fol lo win g ma nne r. Con nec t a 1 50 0Ω1 0W r esistor pa ra ll e led
by a 0.15μF AC- typ e cap aci tor b etw e en an exp ose d m eta l
p art an d a kno wn g o od ear th gr ou nd ( wate r pip e, et c.).
M easu r e th e A C vo l tag e acr oss th e r esist or wit h t he AC
voltmet er. Move the res ist or connection to each exposed metal
part, particularly any exposed metalpart having a return path to
th e ch assis , an d m ea sure t he A C volta ge acr oss th e r esisto r.
Now, r eve rs e th e pl u g in t he A C out let a nd rep e at e ach
m easu r em en t. An y volta ge me asu re d m ust not exce ed 0.7 5V
AC (r.m. s.) . This corresp onds t o 0.5 mA A C (r.m. s.).
Howeve r, i n tr op ic al ar ea, this m ust n ot excee d 0 .3V AC
(r.m.s. ). This corresp onds t o 0.2mA A C (r.m .s.).
0.15μF AC-T YP E
1500Ω10W
GOOD
EARTH
GR OUND
PLACE THIS PROBE
ON E A C H EX PO SE D
ME T AL PA RT
ACVOLTMETER
(HAVING 1000 Ω/V,
OR MOR E SENSIT IVITY)
11 . High voltage hold down circuit check.
Af ter r ep air of th e high volt ag e h ol d d own ci rcui t, th is ci rcu it
sh all b e c hec ked to op er ate cor r ectly.
See ite m "Ho w to check the high voltage hold down
cir cuit".
A V
This mark shows a fast
operating fuse, the
letters indicated below
show the rating.

No.52005
A
V-27F703
A
V-27F713
A
V-27F803
4
FEATURES
"New chas sis design en ables use of a single board with simplif ied
circuitry.
"Users can make f un to co nnect t he DVD player wit h the compon ent
vid eo signal inpu t ter mina l.
"Pr ovid ed with miniatu re tuner ( TV/CATV ).
"Mu lt if unct ion al remote con tro l p ermi ts pictu re a djustment.
"Ad option of t he CH ANNEL GUARD fu nction pr even ts th e speci fic
chan nels fr om being sel ected, unless th e “ ID nu mbe r” is key in .
"I2C bus control utilizes single chip ICs.
"Adoption of the VIDEO STATUS / THEATER PRO. function.
"Ad option of the ON/OF F TIMER and SLE EP TI MER fu ncti on .
"Built-in V-CHIP system.
"Clos ed- caption b roa dcasts can be vi ewed.
"Built-in MTS sys tem, B BE / HYPER-SURROUND system.
"S-VIDEO in put ter minal for taking best advantag e of S uper VHS .
"Dig it al Com b fil ter Imp roved pictur e qu ality.
"Built-in EZ SURF system.(AV-27F803)
By push in g the E Z S URF key, B ack Pro gra m Inf ormation can be
displayed in written from program Inf ormation uses a CAL L
LE TTER ( broadca stin g stati on ID) , a Networ k na me and a
Pr ogram n ame of XDS d ata, an d colle ct’s tu ning of the tune r f or
PIP one b y one.
HOW TO IDENTIFY MODELS
•How to recognize from the appearance of the model concerned is written below. Please distinguish from several contents
currently printe d on t he r ati ng l abel.
INDICATED “S”
[RATING LABEL]
Indicated
AV -27 F703
AV -27 F713
AV -27 F803
Distin
g
uish
Pl ease d ist in guish from severa l conten ts
curr ently printed on t he Rating Label.

No.52005
A
V-27F703
A
V-27F713
A
V-27F803
5
MAIN DIFFERENCE LIST
!
!!
!Model name
Parts Name
AV-27F 703/S AV-27F 713/S AV-27F 803/S
MA IN PW B SGJ -1004A -M2 SGJ -1003A -M2 SGJ -1002A -M2
PIP PWB ××SGJ -4 001A -M2
AV SEL PW B SGJ -5 002A -M2 ←SGJ -5 001A -M2
3D Y/C S EP MODULE P WB ×× SGJ 0Y001A-M2
!FR ONT CA BI. A SSY LC10 878 -0 03B-A LC10 878 -0 04A-A LC10 878 -0 03B-A
JVC M ARK CM4 8006 -0 08- C CM4 8006 -0 09- C CM4 8006 -0 08- C
!DOOR LC20 628 -0 01C- A LC20 628 -0 02A-A LC20 628 -0 01C- A
!KN OB (P OW ER) LC31 237 -0 01A-A LC31 237 -0 02A-A LC 31 237 -0 01A-A
OPE RATION SH EE T LC31 238 -0 04A-A LC31 238 -0 05A-A LC31 238 -0 04A-A
!CON TROL K NOB LC20 217 -0 04B-A LC20 217 -0 06A-A LC20 217 -0 04B-A
!TERM INA L BO AR D LC20 899 -0 04A-A LC20 899 -0 04A-A LC20 899 -0 05A-A
REMO CO N UN IT RM-C 326 G-1 A RM-C 326 -1 A RM-C 325 G-1 A
INPUT TERMINAL INPUT1～INPUT3 ←INPUT1～INPUT4

No.52005
A
V-27F703
A
V-27F713
A
V-27F803
6
FUNCTIONS
1INPUT3 VIDEO ter mi nal 6VOLUME -/+ buttons
2INPUT3 AUDIO L / MONO terminal 7SENSO R REMOTE CONTR OL
3INPUT3 AUDIO R termi nal 8ON TIMER LED
4MENU button (▼)9POWER button
5CHANNEL -/+ buttons
OPERATE / buttons (use MENU screen)
■REAR TERMINAL
[
[[
[AV-27F703 /S, AV-2 7F 713 /S ]
1INPUT 1
(
S-VIDEO
,
V
,
L/MONO
,
R
)
terminals
2INPUT 2 (V, L / MONO, R) terminals
/ COMPONENT VIDEO(Y, PB, PR) terminal s
3AUDIO OUT(L, R) terminals
4AV CO MPULI NK Ⅲ
5VHF / UHF terminal
[
[[
[AV -2 7F 7 03 /S, AV-27F713/S ] [
[[
[AV -2 7F 8 03 /S ]
■
■■
■FRONT PANEL CONTROL
1
2
3
4 5
1
2
4
5 6
3
[
[[
[AV-27F803/S ]
1INPUT 1
(
S-VIDEO
,
V
,
L/MONO
,
R
)
ter minals
2INPUT 2 (V, L / MONO, R) terminals
/ COMPONENT VIDEO(Y, PB, PR) terminal s
3INPUT 4 (L, R) terminals
/ COMPONENT VIDEO
(
Y
,
PB
,
PR
)
terminals
4AUDIO O UT(L, R) terminals
5AV CO MPULI NK Ⅲ
6VHF / UHF ter mi nal
1
2
3 6
5 8
47 9

No.52005
AV-27F703
AV-27F713
AV-27F803
7
■REMOTE CONTROL UNIT
RM-C326G : AV-27F703/S
RM-C326 : AV-27F713/S
[RM-C325G : AV-27F803/S]
1 2 3 4
12
15
5
6
8
19
20
13
21
18
7
9
10
11
14
17
16
1TV / CATV switch
2VCR / DVD switch
316 : 9 MODE Key
4POWER Key
5INPUT Key ( )
6DISPLAY Key
7SLEEP TIMER Key ( )
8HYPER SUR. Key ( Can be changed ON / OFF )
9VIDEO STATUS Key
ATHEATER PRO key
BBBE key ( Can be changed ON / OFF )
CMUTING Key
DFUNCTION Key ( CH -/+ / VOL -/+ )
The FUNCTION keys operate CHANNEL and VOLUME normally.
These keys are also used to navigate MENU system.
EMENU Key
FNUMBERS Key
G100+ Key
HRETURN+ Key
ILIGHT Key
JV-CHIP Key
KEXIT Key
LVCR / DVD Keys
TV VIDEO1 VIDEO2 VIDEO3
0 15 30 ……165 180
1 2 3 4
12
5
6
8
19
20
13
21
22
18
7
9
16
10
11
14
17
23
15
1TV / CATV switch
2VCR / DVD switch
316 : 9 MODE Key
4POWER Key
5INPUT Key( )
6DISPLAY key
7SLEEP TIMER Key ( )
8HYPER SUR. Key ( Can be changed ON / OFF )
9VIDEO STATUS Key
ATHEATER PRO key
BBBE key( Can be changed ON / OFF )
CMUTING Key
DFUNCTION Key ( CH -/+ / VOL -/+ )
The FUNCTION keys operate CHANNEL and VOLUME normally.
These keys are also used to navigate MENU system.
EMENU Key
FNUMBERS Key
G100+ Key
HRETURN+ Key
ILIGHT Key
JV-CHIP Key
KEXIT / PIP OFF Key
LVCR / DVD Keys
MPIP Key
NEZ SURF Key (Back Program Information can be displayed.)
TV VIDEO1 VIDEO2 VIDEO3 VIDEO4
0 15 30 ……165 180

No.52005
A
V-27F703
A
V-27F713
A
V-27F803
8
SPECIFIC SERVICE INSTRUCTIONS
DISASSEMBLY PROCEDURE
REMOVING THE REAR COVER
1. D isc onn ect t he po w er plu g f ro m wa ll out le t.
2. As s hown i n th e Fi g .1, rem o ve th e 12 screws marked !
!!
!.
3. W i thdr a w t he r ear c over b ackwar d.
REMOVING THE TERMINAL BOARD
"After removing the rear cover.
1. As s hown i n Fi g.1 , r e mo ve t he scre ws ma rked "
""
".
2.Withdrawthe terminal board toward you.
REMOVING THE CHASSIS
"After removing the rear c over / termin al board.
1. Sli ght l y r aise t he bo th si d es of ch assi s b y ha nd an d r emo ve th e
2claws u nder the both side of th e chassis from the front cabinet.
2. W i thdr a w t he chass is backwa rd .
(If n ecess ary, rem ove t he wire clam p, c onn ect ors etc.)
REMOVING THE SPEAKER
"After removing the rear cover.
1. A s sh own in Fi g. 1 , re mo ving th e 4screws m arked #
##
#,then
remove the speaker.
2. F ollow th e s am e st eps wh en r emovi ng th e oth er ha nd sp eak er.
NOTE : When removing the 4 screws mark ed #
##
#of th e sp eake r ,
remove t he lower side screw f irst, and th en rem ove th e
up per one .
REMOVING THE LED & POWER SW PWB
"After removing the rear cover & terminal board.
1. R emove th e 2screws marked $
$$
$as s hown in Fig. 1.
2. W ithdra w t he LE D & P OW ER SW PWB t oward yo u .
*If nec essary, remove the wire c lamp, co nnector etc.
REMOVING THE FRONT CONTR OL PWB
"After removing the rear cover & terminal board.
1. R emove th e 2screws marked %
%%
%as s hown in Fig. 1.
2.Withdrawthe FRONT CONTROL PWB towardyou.
*If nec essary, remove the wire c lamp, co nnector etc.
CHECKIN G THE CHASSIS
To check the PW Board from back side.
1. Pu ll out the ch assis ( re fer t o R EM OVI NG TH E C HA SS IS) .
2. Erect th e chas sis ver ti ca lly so th at you c an ea si ly ch eck th e b ack
side of the PW B oar d.
[CAUT ION]
"W hen e r ecti ng th e ch assi s, b e car ef ul so tha t th er e wil l b e no
contacting with other PW Board.
"Be fore tu rn ing o n p ow er, make s ur e th at t he wir e con nec tor is
pr op erl y con nec ted .
"When conducting a check with power supplied, be sure to
confirm that the CRT EARTH WIRE (BRAIDED ASS’Y) is
connected to the CRT SOCKET PW board.
WIRE CLAMPIN G AND CABLE TYING
1. Be sure t o cla mp th e wire.
2. Never remove the c able tie use d f or tying the wires together.
Should it be inadvertently re moved, be sure to tie the wires with a
new cable tie.

No.52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
9
CRT SOCKET
PWB
Thi s e xpl od ed vi ew describe s a bou t th e AV -2 7F8 03 /S .
Yo u c an use th e explo ded vie w for d isasse mb lin g t he
AV -2 7F70 3 /S AV -2 7F71 3 /S in t he s ame st ep a s f or
thi s one .
Fig.1
C
(×4)
SP EAKE R
FRONT CONTROL
PWB
CHASSIS
CLAW
MAIN PWB
POWER CORD
TERMINAL
BOARD
PIP PWB
AV-27F803/S
REAR COVER
A
(×12 )
CLAW
AV SELECTOR
PWB
LED & POWER SW
PWB
E
(×2)
D
(×2)
FRONT CABINET
(×
××
×6) AV-27F803
/S
(×
××
×4) AV-27F703
/S
AV-27F713
/S
B
3 D Y /C SE P MODULE
AV-27F803
/S

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
10
MEMORY IC REPLACEMENT
1. Memory IC
This TV uses memory IC.
Thi s m emor y IC st or es d at a f or pr op er o per a ti on of the vi de o a nd def l ecti o n ci rcui ts.
W hen r ep la ci ng t he m em ory IC , be sur e to use an IC co nta i ning th is (i nitia l value ) d at a.
2. Memory IC replacement procedure
(1) Power off
Sw itch off th e p ow er a nd d isc onn ect t he p ow er co rd fr om t he wall
ou tl et.
(2) Replace the memory IC
Be sure t o use a memory I C writte n with the initia l s etting dat a.
(3) Power on
Connect the power cord to th e wall outlet a nd switc h on the p ower.
( 4) Conf ir m the sy st em const ant v alue
"12 .S YST EM ( SYS ) do not a djust norm all y.
"The adjustment should not be done without signal.
!Ho w to enter the SERVICE MENU.
1) Press the SLE EP TIM ER key and set SLE EP TIME R for 「0 mi n」.
2) Be for e disap pe ar th e displa y of SLE EP TIMER settings,
simu lt an eou sl y pr ess th e DI SPLAY key and VI DE O STATUS key of
the remote controlunit.
3) The SERVICE MENU screen will be displayed as shown Fig.1.
!Ho w to enter the 12. SYSTEM(SYS).
1) While the SERVICE MENU is displayed, select the
12.SYSTEM(SYS) item with FUNCTION ( ▼/▲) keys, and the
FUNCTION ( / ) keys is pressed, the screen will be displayed as
sh own i n Fig.2 .
5) R efe r to t he SY ST EM ( SY STEM CO NS T ANT) TABL E 1 an d ch eck
the setting items. If th e value is dif ferent, select th e s etting it em with
the FUNCTION ( ▼/▲) keys and adjust the setting wit h the
FUNCTION( / ) keys. (Th e lett ers of t he s elect ed ite m are
displayed in yellow.)
6) W hen ad ju stment has com plet ed , th e va lu es st or e int o m emor y IC
automatically
7) Press the EXIT key to return the SERVICE MENU screen.
8) T he n p ress th e E XIT key ag ain to r etur n th e n or mal scr een .
(5) Receive the channel setting
Refer to the OPERATING INSTRUCTIONS (USER'S GUIDE) and
set th e rece ive ch ann els ( Cha nn els Prese t) as desc ribe d.
( 6) User se tting s
Check th e us er sett in g it em s acc or ding to T ABL E 2 .
W here thes e do no t a gr ee , refer to th e O PE RA T ING
INSTRUCT IONS (US ER'S GUIDE) and set the items as described.
(7) SERVICE MENU setting
Verify what to set in the SERVICE MENU, and set whatever is
necessary(Fig.1) .
Refe r to t he SERVI CE ADJUSTMENT f or s ett ing.
1 2.S YSTEM
(
SY S
)
***SYS01 VIDEO IN
SERVICE MENU
1. V/C(S) 2. DEF(D)
3. SOUND(A) 4.OTHERS(F)
5.PIP(PIP) 6.3L Y/C(LYC)
7. LOW LI GHT 8. HIGH L IG HT
9.RF AFC 10.VCO
11.I
2
C BUS 12.SYSTEM(SYS)
S
ELE
C
T BY
OPERATEBY EXIT BY EXIT
AV-27F803
/S
6.3D Y/C(DYC)
Verified
SET TING ITEM
SET TING No SET TING VALUE
SE RVICE MENU
N
O
TE Al th ou gh des ig n is d iffer e nt, eac h rem ot e c ontr o ll er
has the same control function.
Fig.1
Fig.2
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
DI
S
PL A Y
(RM-C325G)
FUNCTION
▼/
▲
POW E R
NUMBER
SLEEP
TIMER
VIDEO
S
TAT
US
EX IT
PIP OFF
FUNCTION
/
MUT ING
ME MO R Y

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
11
12. SYS TEM(S YS) 【Syst em Con stant se tting 】
Initial setting v al ue Initial setting v al ue
AV-27F703
/S AV-27F703/S
No. Setting item AV-27F803
/S
AV-27F713
/S
No. Setting item AV-27F803/S
AV-27F713/S
SY S01 VIDEO IN 04 03 SY S13 HYP SUR R 01 01
SY S02 PIP 01 00 SY S14 16:9 MD 01 01
SY S03 3D Y/ C 01 00 SY S15 HYP S CA N 01 01
SY S04 Y C V 01 01 SY S16 EZ SURF 01 00
SY S05 CCD P CHK 01 01 SY S17 ID DISP 01 01
SY S06 PURITY 00 00 SY S18 COMP ULINK 01 01
SY S07 VM 01 01 SY S19 CCD 01 01
SY S08 NOISE CR 01 00 SY S20 VCHIP 01 01
SY S09 CLR TEMP 01 01 SY S21 VCHIP CA 01 01
SY S10 THEATE R 01 01 SY S22 JVC L OGO 01 01
SY S11 THEATE R PRO 01 01 SY S23 CMP IN 01 01
SY S12 BB E 01 01 SY S24 CXA1 875 00 00
User setting
Setting item Setting value Setting item Setting value
Use remote control ler ke ys
POW E R OFF DISPL A Y OFF
CHANNEL Cable-02 VIDEO STATUS DYNAMIC
VOL UME 10 H YPE R S U RR OU N D OFF
TV/VIDEO TV BB E ON
PIP SOURCE Cable-04 (AV-27 F8 03/S )
Settings of MENU
PICTURE MENU INITIAL SETUP MENU
STANDARD LA NG UAGE ENG
TINT CENTER FRONT PANEL LO CK OFF
COLO R CENTER V2 CO MP ONENT-I N NO
PICTURE CENTER+14 AUTO SHUT OFF OFF
BRIGHT CENTER CLOSED CAPTIO N OFF (CC1 / T1)
DETAIL CENTER AUTO TUNER SET UP Unnecessary to set
COLOR TEMPERATURE LOW CHANNEL SUMMARY Se tting C h ann el
Gu ar d ch an ne l : Al l OFF
NOISE MUTING ON V-CHI P OFF
SOUND ADJUST MENU SE T LOCK C ODE (000 0) U nn eces sar y to set
BA SS CENTER XDS I D ON
TREBL E CENTER
BALANCE CENTER
MT S STEREO
CLOCK / TIMERS MENU
SE T CLOCK MA NU A L
TIME ZONE : PACIFIC
D.S.T. : OFF
ON / O FF TIME R OFF
Table 1
Table 2
+ 14 (AV-27 F8 03/S)
+ 10 (AV-27 F7 03/S / AV-27F713/S)

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
12
SERVICE ADJUSTMENTS
ADJUSTMENT PREPARATION
1. You ca n ma ke t he ne ce ssa ry ad just me nts f or t his unit with
either the Remote Control Unit or with the adjustment tools
and parts as given below.
2. Ad justment with the Remote Control Unit is made on the
basis of the initial setting values, however, the new setting
values which set the screen to its optimum condition may
differ from the initial settings.
3. M ake sur e t hat AC p ower is tu r ned o n c orrec tl y.
4. T urn on th e pow er for s et an d test eq ui p me nt bef or e use , and
sta rt t he ad justmen t p r oced ures aft er w aiting at least 30 m in ut es.
5. U nless o the r wi se s pec if i ed, pr ep ar e t he mo st su it ab le recep tion
or i np ut sign al for adj ust m ent.
6. Never touch any adjustment part which ar e not spe cif ied in th e
list for this adjustment - variable res istors, transformers, initial
set ting val u e, etc.
7. Pres etting b efore ad j ustm en t.
Unless ot her wise spec if i ed i n t he a dj ustm e nt i nstr uct i ons, p r ese t
th e f ol lo win g f un ctions with th e r e mo te c ont ro l un it :
User menu preset value
MENU ITEM PRES ET
VIDEO STATU S STA NDARD
BA SS, TREB LE , BA LA NCE CEN TER
HYPER SURROUND OFF
TINT, COLOR,
PICTURE, BRIGHT, DETAIL CENTER
MTS STE RE O
ADJUSTMENT EQUIPMENT
1. DC voltmeter (or digital voltmeter)
2. Oscilloscope
3. Sign al g en er at or (P att er n g en er at or) ［NTSC
］
4. Remote control unit
5. T V a ud i o m ultipl e x si gn al ge ne r ator .
6. F requ enc y cou nte r
ADJUSTMENT ITEMS
%CHE CK OF B1 POW E R SUPPL Y %ADJUSTMENT OF VIDEO / CHROMA CIRCUIT
%
AD JU STM EN T OF VCO W HITE BA LANC E( Hig h Li ght & Lo w L igh t) ad ju stment
MA IN VC O a djust me nt PIP WH ITE BALA NCE ( Hig h Li ght ) adj u stm en t
SUB VCO ad ju stment SUB B RI GHT a djust me nt
RF. AGC adjustment SUB CONTRAST adjustment
%
FOCUS adjustment SUB COLOR adjustment
%
ADJUSTMENT DEF CIRCUIT SUB TINT adjustment
V. HEIGHT / V. CENTER(4:3) adjustment %ADJUSTMENT OF MTS CIRCUIT
V. HE IGH T / L. LIN( 1 6:9) adj u stm ent MTS IN PUT L EVE L a dj ust me nt
H. POS I, H . SIZE & S IDE P IN [ ( 4: 3) &(16 : 9 ) ] a djustme nt MTS SEP ARATIO N adjustm en t
PIP DISP LA Y POS I adjus tment % HOW TO CHECK THE HIGH VOLTAGE HOLD DOWN CIRCUIT
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
DI
S
PLA
Y
(RM-C325G)
FUNCTION
▼/
▲
POW E R
NUMBER
SLEEP
TIMER
VIDEO
STA TUS
EX IT
PIP
O
FF
FUNCTION
/
MUT ING
ME MO R Y

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
13
ADJUSTMENT LOCATIONS
LED & PW SW PWB
FRONT
FRONT AV I N PWB
MENUVOL CH
CN 600 7
B1
(TP-91)
UPPER : FOC US
LOWER : SCREEN
CN 007
TUNE R
AV SELECTOR PWB
TP-E
B1
13
HV
E1
CR T EAR TH
(BR AIDED ASS'Y)
S1
HVT
HVTHVT
HVT
V CENTER SW
IC702
SS
S42 1
IC201
MAIN PWB
CN 003
PI P P WB
CN 400 2
PW
F901
DEG
B B
J6 403 J6 402 J6 401
CN 600 6
POWER
LED
POWER
SW
S77 01
D 770 1
IC77 01
SENSOR
( )
C
CN 005
IC101
T111
MAIN VCO
CN 500 1 CN 500 3
PIP TUN ER/IF
WHT BL K
FRONT
T411
SUB VC O
IC421
IC621
IC911
me mory IC
(AV-2 7F 803 /S only)
3D Y/C SEP
MODULE
AV-2 7F803 /S ONLY
(AV-2 7F 803 /S
only)

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
14
TOP
CRTEARTH
(BR AIDED AS S'Y)
TP-R
CRT SOCKET PWB
TP-E( )
CN 300 5
CN 30E2
CN 300 4
PIP PWB
(
AV- 2 7F80 3 /S
)
TP-B
TP-G
V
TP-E1
TP-E2
T4111
SUB VC O
IC
CN 400 2
TOP
AV SELECTOR PWB
J5 501
J5 502
J5 504
(AV-2 7F 803 /S
)
J5 503
CN 500 1 CN 500 2
TOP
71 6
1
PIP TUN ER
3D Y/C SEP
MODULE
AV-2 7F803 /S ONLY
(AV-2 7F 803/S)

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
15
BASIC OPERATION OF SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. In general, basic setting (adjustments) items or verifications are performed in the SERVICE MENU.
(1) V/C (S) ･･･････ ･････････････ ････････････ ････ This se t the s etting values (a djustment values) of th e VIDEO/CHROMA circuits.
(2) DEF (D) ･･･････ ･････････････ ････････････ ･･･ This se t th e s etting values (adjustme nt values) of the DEFLECTIO N circuit.
(3) SOUND (A) ･･･････ ･････････････ ････････････ This set the s etting values (a djustment values) of the AUDIO circuit.
(4) OTHERS (F) ･･･････ ･････････････ ･･･････････ This is us ed when the OTHERS MODE is verified. [Do not adjust]
(5) PIP (PIP) ･･･････ ･････････････ ････････････ ･･ This se t th e s etting valu es(adju stment valu es) of th e PI CT URE-IN-PICTURE circuit .
( PIP is me ans as P i ctur e In Pictu re ) [A V- 27F8 03 /S]
(6) 3LY/C(LYC) / 3DY/C(DYC) ･･･････ ････････････ This is us ed when the 3L( or 3D) Y/C MODE is verified. [Do not adjust]
[3L Y/C(LYC) =AV-27F703/S, AV-27F71 3/ S / 3D Y/C( DYC )=AV-2 7F 803/S]
(7) LOW LIGHT･･･････ ･････････････ ････････････ Thi s se ts th e s etting va lu es ( a djust me nt values ) of t he W HIT E BAL AN CE cir cuit.
(8) HIGH LI GHT ･･･････ ･････････････ ･･･････････ T his se ts th e s etting va lu es ( a djust me nt val ues ) of the W HITE B ALANC E ci rcui t
(9) RF AFC･･･････ ･････････････ ････････････ ････ This is us ed when th e RF AFC MODE is verif ied. [Do not adjust]
(10)VCO ･･･････ ･････････････ ･･････････････････ This is us ed w hen th e I F VC O i s adjus ted .
(11)I2 C BUS ･･･････ ･････････････ ････････････ ･･･ This is us ed when ON/O FF of t he I2C BUS CTRL is set. [Fixed ON]
(12)SY STEM (SYS) ･･･････ ･････････････ ･････････ T his is us ed w hen th e S YST E M is ve r if i ed. [Fixed value]
3. Basi c Op era tions of t he SERVI CE MENU
(1) How to enter the SERVICE MENU.
Press the SLE EP TIME R key a nd s et th e SLE EP TIM ER for
｢0MIN｣.
Then press the DI SPLAY key and VI DE O S TAT U S key of the
remote co ntrol unit at th e same time t o ent er th e SERV ICE
ME NU sc re en .(FiG .1)
(2) SERVICE MENU screen selection
In SERVI CE MENU, press the FUNCTION (▼/▲) key to
select an y of th e SU B M EN U it em s.
( The l e tte rs of t he s elect ed it em s ar e di sp la yed in ye ll o w. )
(3) Enter the any setting ( adjustment ) mode
%1. V/C(S), 2. DE F(D), 3. SO UND(A), 4. OTHERS(F),
5. PI P(PIP), 6 . 3L Y/C(LYC) [AV-27 F7 03/ S/ AV-2 7F713 /S] /
3D Y/C(DYC) [AV-2 7F803 /S ], 7. LOW LIG HT, 8. HI GH LIGHT,
9. RF AFC, 1 0. VCO, 1 1. I2C BUS an d 12 . SY STEM( SY S)
mode.
1) If select an y of 1. V/C (S ) / 2. DE F ( D) / 3. SO UND ( A)
/ 4. OTHERS(F) / 5. PIP(PIP) / 6. 3L Y/C(LYC)
[AV-27 F7 03/S/ AV-2 7F713/S ], 3D Y/C(DYC) [AV-2 7F803 /S ]
/
7. LOW LIGHT / 8 . HI GH LIGHT / 9. RF AF C /
10. VCO / 11. I2C BUS / 1 2. SY STEM( SY S) items, and
the FUNCTION ( / )key is pressed from SERVICE
MENU (MAIN MENU), the each screens will be
displayed as shown in figurepage later.
2) T he n t he sett in gs or ver ification s ca n b e p erform ed
SE RV ICE M ENU
1.V/C(S) 2.DEF(D)
3. SO UND( A) 4. OTHERS( F)
5
.PIP
(
PIP
)
6
.
3
L Y
/C(
LY
C)
7. LOW LI GHT 8.HI GH L IGHT
9. RF AF C 10.VCO
11.1
2
CBUS 12.SYSTEM(SYS)
SELECT BY
OPERATEBY EXITBY EXIT
SERVICE MENU
AV-27F803
6. 3D Y/C(DYC)
Fig.1
N
O
TE Al th ou gh des ig n is d iffer e nt, eac h rem ot e c ontr o ll er
has the same control function.
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
DISPLA
Y
(RM-C325G)
FUNCTION
▼
/
▲
POW E R
NUMBER
SLEEP
TIMER
VIDEO
S
TAT
US
EX IT
PIP
O
FF
FUNCTION
/
MUT ING
ME MO R Y

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
16
10.VCO
T U NE R M A IN
HIGH LEVEL
REFERENCELEVEL
LOW LEV EL
SY NC N O
3.SOUND(A)
A 01 IN L E VE L
***
2.DEF(D)
D 01 V F RE Q
R F 4 : 3 S T D L O W
***
8.HIGH L IGHT
***
BRIGHT
7.LO W L IGHT
***
*** ***
SERVICE MENU (MAIN MENU)
1 .V/ C( S) 2 .DE F(D )
3 .SO U ND( A ) 4 .O T HE RS ( F )
5 .PI P (P IP) 6 .3 L Y/ C( LYC )
7.LOW LIGHT 8.HIGH LIGHT
9 .RF AF C 1 0. VCO
11.1
2
C BU S 12. SYSTE M(S YS)
SEL ECT BY
O PER AT E BY EX IT B Y EXI T
9.RF AFC
TOO HIGH GOOD TOO LOW
T U NE R M A IN
A F G ON
FIN E
***
11.I
2
C BUS
I2 C BU S O N
12.SYSTEM(SYS)
***
SY S01 VI DE O IN
5 .P IP( PI P)
PIP01 BRIGHT
***
4.OTH ERS ( F)
F01
***
1.V/C(S)
R F 4 : 3 S T D L O W
***
S0 1 BR IG H T
Do n ot ad just
Do n ot ad just
6.3L Y/C(LYC) / 6.3D Y/C(DYC)
LYC 01
***
***
***
or DYC 01=AV-27F 803
SE RV ICE ME NU

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
17
(4) Setting method
1) FUNCTION (▼/▲) key.
Se le ct t he SETTING ITEM.
2) FUNCTION ( / ) key
Setting (adjust) the SETTING VALUE of t he SETTING ITEM.
When the key is releas ed the SETTING VALUE will be stored (memorized).
3) EXIT key
Retu rn s to th e p re vious scr een .
(5) Releasing SERVICE MENU
1) After returning to the SERVICE MENU upon completion of the setting
( adjus tm ent) wo rk, pr ess t he EXI T key ag ai n.
★The sett ings for LO W LIG HT and HIGH LIGHT are des crib ed in th e
WHITE BA LANCE p age of ADJUSTMENT.
★The set ting for MA IN VCO a r e d escr ib ed in t he VCO p ag e of A DJ US T MEN T .
BRIGHT ***
** * ** * * **
7.LOW LIGHT
RF 4 : 3 STD LOW
***S01 BRIGHT
1.V/C (S)
SETTING No
SETTING ITEM
SETTING VALUE
** * * **
8.HIGH LIGHT
TUNER MAIN
HIGH LEVEL
REFERENCE LEVEL
LOW LEVEL
SYNC NO
10 .VCO

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
18
INITIAL SETTING VALUE OF SERVICE MENU
1. Ad
j
ustment of the SERVICE MENU is made on the basis of the initial settin
g
values
;
howev er
,
the new settin
g
v alues which
set the screen in its optimum condition may differ from the initial setting.
2. Do no t change the initial setting values of the setting (adjustment) item s not listed in “ADJUSTMENT”.
"V / C M ODE
RF STANDARD(4:3)
AV-27F803
/S AV-27F703 /S,AV-27F713/SEXTERNAL
(S,CV) COMPONENT
No . Se tt in
g
item
STD(4:3) STD(16:9) THEATER
(4: 3) STD(4:3) STD(16:9) THEATER (4: 3) AV-27F803
/S AV-27F703
/S
AV-27F713
/S
AV-27F803
/S AV-27F703/S
AV-27F713/S
S01 BRIGHT 64 --- --- 64 --- --- --- --- --- ---
S02 PICTURE 60 --- --- 60 --- --- --- --- --- ---
S03 COLO R 50 --- --- 50 --- --- --- --- 46 46
S04 TINT 68 --- --- 68 --- --- --- --- 72 72
S05 DETAIL 38 --- --- 33 - -- - -- 40 35 45 40
S06 BRIGHT +- --- ±
±±
±00 +01 --- ±
±±
±00 +01 -01 -02 ±
±±
±00 ±
±±
±00
S07 PICT+- --- -08 -10 --- -08 -10 ±
±±
±00 ±
±±
±00 ±
±±
±00 ±
±±
±00
S08 COLO R +- --- ±
±±
±00 -03 --- ±
±±
±00 -03 -02 -02 --- ---
S09 TINT+- --- ±
±±
±00 -03 --- ±
±±
±00 -03 +11 +05 --- ---
S10 DETAIL +- --- --- ±
±±
±00 --- --- ±
±±
±00 --- --- --- ---
Initial setting v al ue
RF/EXT (S,CV) COMPONENT
STANDARD THEATER STANDARD THEATER
No . Se tt in
g
item
LOW HI GH LOW HI GH LOW HI GH LOW HI GH
S11 R CUT OFF 30 --- --- --- --- --- --- ---
S12 G CUT OFF 30 --- --- --- --- --- --- ---
S13 B CUT OFF 30 --- --- --- --- --- --- ---
S14 R DRI VE 64 --- --- --- --- --- --- ---
S15 B DRIVE 64 --- --- --- --- --- --- ---
S16 R CUT +- --- ±
±±
±00 ±
±±
±00 ±
±±
±00 -10 --- --- ---
S17 G CUT +- --- ±
±±
±00 ±
±±
±00 ±
±±
±00 ±
±±
±00 --- --- ---
S18 B CUT +- --- ±
±±
±00 ±
±±
±00 ±
±±
±00 -10 --- --- ---
S19 R DRV +- --- +05 + 13 +07 ±
±±
±00 --- --- ---
S20 B D RV +- --- +06 -25 -09 ±
±±
±00 --- --- ---
S2 1 NTSC MA T 03 03 01 01 02 02 01 01
S2 2 BL ACK S T 02 --- 02 --- --- --- --- ---
S2 3 DCRE ST 01 --- 01 --- --- --- --- ---
S24 DCRSW 01 --- 01 --- --- --- --- ---
Initial setting v al ue
No . Se tt in
g
item RF EXTERNAL COMPONENT
S2 5 AS Y SH RP 04 04 04
S2 6 BP F FO 00 00 ---
S27 KILR OFF 00 00 ---
S2 8 KIL R SE N 01 01 ---
- -- can n ot b e adjust m ent

No. 52005
A
V-27F70
3
A
V-27F71
3
A
V-27F80
3
19
No . Setting item Initial setting value No . Setting ite m Initial setting value
S29 RGB MUTE 00 S39 Y MUTE 00
S30 BLUE B 00 S40 SV M G AIN 03
S31 VIDEO SW 03 S4 1 SV M PH 01
S3 2 CMP AB CL 00 S42 W PL 00
S3 3 OSD AB CL 00 S43 COL GMM 00
S34 OSD CONT 07 S4 4 V1 GAI N 04
S35 SUB CONT 05 S45 AGC ADJ 63
S36 ABL GA IN 00 S46 VMOFF DE +03
S3 7 AB L PNT 03 S4 7 AP C CLK 01
S3 8 Y G AMMA 01
"DE F M OD E
Initial setting v al ue Initial setting v al ue
AV-27F803/S,AV-27F703
/S
AV-27F713
/S
AV-27F803/S ,AV-27F703/S
AV-27F713
/S
No. Setting item
RF
(4:3)
RF
(16:9)
EX T
(4:3)
No. Setting item
RF
(4:3)
RF
(16:9)
EX T
(4:3)
D01 V FREQ 00 00 03 D18 WVMT BTM 00 01 00
D02 AFC GAI N 00 00 02 D19 EWCR TOP 12 --- 12
D03 H POSI 20 --- 20 D20 EWCR T+- --- 00 ---
D04 H POSI+- --- 00 --- D21 EWCR BTM 14 --- 14
D05 V PHASE 00 - -- 00 D22 EWCR B+- --- 00 ---
D06 V PH+- --- 00 --- D23 EW PARA 36 - -- 36
D07 V SIZE 75 --- 75 D24 EW PARA+- --- -15 ---
D08 V SIZE+- --- -30 --- D25 V EHT 00 - -- 00
D09 V CENTER 32 --- 32 D26 V EHT+- --- 00 ---
D10 V CENT+- --- 00 --- D27 H EHT 00 --- 00
D11 V S CORR 09 --- 09 D28 H EHT+- --- 00 ---
D12 V S CO+- --- 00 --- D29 TRAPEZ 31 - -- 31
D13 V LIN 10 --- 10 D30 TRAPEZ+- --- 00 ---
D14 V LIN+- --- 00 --- D31 V AGC 00 00 00
D15 H SIZE 33 --- 33 D32 BLANK SW 00 00 00
D16 H SIZE+- --- 00 --- D33 VRMP BI 00 00 00
D17 WVMT TOP 00 01 00
"SOUND MODE
No . Setting item Initial setting val ue
A0 1 IN LE VEL 10
A02 LOW SEP 32
A0 3 HI SE P 32
A0 4 SA PC 00
A0 5 BB E BA SS ±
±±
±00
A0 6 BB E TR E -03
- -- can n ot b e adjust m ent

No. 52005
A
V-27F703
A
V-27F713
A
V-27F803
20
"OTHERS MODE (Do not adjust)
Initial setting v al ue Initial setting v al ue
No. Setting item AV-27F803
/S AV-27F703/S
AV-27F713/S
No. Setting item AV-27F803
/S AV-27F703
/S
AV-27F713
/S
F01 OSD POSI 37 37 F15 VCSN 1 00 00
F02 OSD PREQ 90 90 F16 VCSN 2 10 10
F03 CCD POSI 39 39 F17 VCSN 3 20 20
F04 CCD FREQ 91 91 F18 VCSN STP 02 02
F05 CCD CONT 04 04 F19 VN DAT A +08 +08
F06 PUR WBCK 00 00 F20 VM DAT B -08 -08
F07 PUR CONT 02 02 F21 VM DAT C -20 -20
F08 SN TYP E 01 02 F22 VM DAT D -32 -32
F09 YCSN TM 05 05 F23 VM DAT E 01 01
F10 YCSN E 05 05 F24 VMOFF TY 02 02
F11 YCSN F 16 16 F25 YC VMOFF 25 5 25 5
F12 YCSN G 32 32 F26 EZSF T M 40 40
F13 VNR CHK 03 03 F27 XDSID TM 15 15
F14 VCSN TM 05 05 F28 FM TRAP 01 01
"3L Y / C MODE (Do not adjust)
Initial setting v al ue
No. Setting item AV-27F703
/S,AV-27F713 /S
LYC01 MO DE 04
LYC02 VE NH 01
LYC03 PDSO FF 00
LYC04 CB 00
LYC05 VNLR 02
LYC06 GSEL0 00
LYC07 GSEL1 01
LYC08 COR 00
LYC09 TRAP 01
LYC10 CHT RAP 00
LYC11 CBPF 00
LYC12 ENHOFF 00
"3DY / C MODE [AV-27F803/S]
No. Setting item Initial setting val ue No . Setting item Initial setting val ue
DYC01 D7-0 21 DYC15 D7-0 09
DYC02 D7-4 00 DYC16 D7-0 24 1
DYC03 D1-0 00 DYC17 D7-0 37
DYC04 D7-0 19 3 DYC18 D7-0 08
DYC05 D7-3 04 DYC19 D7-0 68
DYC06 RF CDL 02 DYC20 D7-0 48
DYC07 EXT CDL 02 DYC21 D7-0 08
DYC08 D7-0 42 DYC22 D7-0 51
DYC09 D7-0 36 DYC23 D7-0 20 0
DYC10 D7-0 34 DYC24 D7-0 74
DYC11 D7-0 01 DYC25 D7-0 23 6
DYC12 D5-0 22 DYC26 D7-0 00
DYC13 D7-0 00 DYC27 D7-0 00
DYC14 D7-0 15 DYC28 3DYC 01
Setting item do not displa y