JVCKENWOOD KW-M540BT User manual

KW-M540BT
MONITOR WITH RECEIVER
INSTRUCTION MANUAL
B5A-2154-10 (E)
ENGLISH
This instruction manual is used to describe the models listed above. Model availability and features (functions)
may differ depending on the country and sales area.
01_KW_M540BT_E_COVER.indd 101_KW_M540BT_E_COVER.indd 1 12/13/2017 11:33:08 AM12/13/2017 11:33:08 AM

ENGLISHi
Important NoticeImportant Notice
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARNINGS
and CAUTIONS in this manual.
Please keep the manual in a safe and accessible
place for future reference.
WARNINGS
To prevent accidents and damages
• DO NOT install any unit or wire any cable in a
location where;
–it may obstruct the steering wheel and gearshift
lever operations.
–it may obstruct the operation of safety devices such
as air bags.
–it may obstruct visibility.
• DO NOT raise the volume level too much, as this will
make driving dangerous by blocking outside sounds,
and may cause hearing loss.
• DO NOT operate the unit while driving. If you need
to operate the unit while driving, be sure to look
around carefully.
• Stop the car before performing any complicated
operations.
• The driver must not watch the monitor while driving.
CAUTIONS
To care for the unit
• If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
To care for the monitor
• The monitor built into this unit has been produced
with high precision, but it may have some ineffective
dots. This is inevitable and is not considered
defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the keys on the touch panel with your finger
directly (if you are wearing a glove, take it off).
• When the temperature is very cold or very hot...
–Chemical changes occur inside, causing
malfunction.
–Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
On the volume setting
• Digital devices produce very little noise compared
with other sources. Lower the volume before playing
these digital sources to avoid damaging the speakers
by sudden increase of the output level.
For Israel
02_KW_M540BT_E_SAFETY.indd i02_KW_M540BT_E_SAFETY.indd i 12/13/2017 11:33:19 AM12/13/2017 11:33:19 AM

ENGLISH ii
Important NoticeImportant Notice
Information on Disposal of Old Electrical and
Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste
collection systems)
Products and batteries with the symbol (crossedout
wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries
should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Notice: The sign “Pb” below the symbol for batteries
indicates that this battery contains lead.
Declaration of Conformity with regard to the RE
Directive 2014/53/EU
Declaration of Conformity with regard to the RoHS
Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi,
Kanagawa, 221-0022, Japan
EU Representative:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel,
GERMANY
English
Hereby, JVCKENWOOD declares that the radio
equipment “KW-M540BT” is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://www.jvc.net/cs/car/eudoc/
Français
Par la présente, JVCKENWOOD déclare que
l’équipement radio « KW-M540BT » est conforme à la
directive 2014/53/UE.
L’intégralité de la déclaration de conformité UE est
disponible à l’adresse Internet suivante :
http://www.jvc.net/cs/car/eudoc/
Deutsch
Hiermit erklärt JVCKENWOOD, dass das Funkgerät
“KW-M540BT” der Richtlinie 2014/53/EU entspricht.
Der volle Text der EU-Konformitätserklärung steht
unter der folgenden Internetadresse zur Verfügung:
http://www.jvc.net/cs/car/eudoc/
Nederlands
Hierbij verklaart JVCKENWOOD dat de radioapparatuur
“KW-M540BT” in overeenstemming is met Richtlijn
2014/53/EU.
De volledige tekst van de EU-verklaring van
overeenstemming is te vinden op het volgende
internetadres:
http://www.jvc.net/cs/car/eudoc/
02_KW_M540BT_E_SAFETY.indd ii02_KW_M540BT_E_SAFETY.indd ii 12/13/2017 11:33:21 AM12/13/2017 11:33:21 AM

ENGLISHiii
Important NoticeImportant Notice
Italiano
Con la presente, JVCKENWOOD dichiara che
l΄apparecchio radio “KW-M540BT” è conforme alla
Direttiva 2014/53/UE.
Il testo integrale della dichiarazione di conformità UE è
disponibile al seguente indirizzo internet:
http://www.jvc.net/cs/car/eudoc/
Español
Por la presente, JVCKENWOOD declara que el equipo
de radio “KW-M540BT” cumple la Directiva 2014/53/EU.
El texto completo de la declaración de conformidad
con la UE está disponible en la siguiente dirección de
internet:
http://www.jvc.net/cs/car/eudoc/
Português
Deste modo, a JVCKENWOOD declara que o
equipamento de rádio “KW-M540BT” está em
conformidade com a Diretiva 2014/53/UE.
O texto integral da declaração de conformidade da UE
está disponível no seguinte endereço de internet:
http://www.jvc.net/cs/car/eudoc/
Polska
Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy
“KW-M540BT” jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności EU jest dostępny pod
adresem:
http://www.jvc.net/cs/car/eudoc/
Český
Společnost JVCKENWOOD tímto prohlašuje, že rádiové
zařízení “KW-M540BT” splňuje podmínky směrnice
2014/53/EU.
Plný text EU prohlášení o shodě je dostupný na
následující internetové adrese:
http://www.jvc.net/cs/car/eudoc/
Magyar
JVCKENWOOD ezennel kijelenti, hogy a „KW-M540BT“
rádióberendezés megfelel a 2014/53/EU irányelvnek.
Az EU konformitási nyilatkozat teljes szövege az alábbi
weboldalon érhető el:
http://www.jvc.net/cs/car/eudoc/
Svenska
Härmed försäkrar JVCKENWOOD att radioutrustningen
“KW-M540BT” är i enlighet med direktiv 2014/53/EU.
Den fullständiga texten av EU-försäkran om
överensstämmelse finns på följande Internetadress:
http://www.jvc.net/cs/car/eudoc/
Suomi
JVCKENWOOD julistaa täten, että radiolaite
“KW-M540BT” on direktiivin 2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutusvaatim us löytyy
kokonaisuudessaan seuraavasta internet-osoitteesta:
http://www.jvc.net/cs/car/eudoc/
Slovensko
S tem JVCKENWOOD izjavlja, da je radijska oprema
»KW-M540BT« v skladu z Direktivo 2014/53/EU.
Celotno besedilo direktive EU o skladnosti je dostopno
na tem spletnem naslovu:
http://www.jvc.net/cs/car/eudoc/
Slovensky
Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové
zariadenie „KW-M540BT“ vyhovuje smernici
2014/53/EÚ.
Celý text EÚ vyhlásenia o zhode nájdete na
nasledovnej internetovej adrese:
http://www.jvc.net/cs/car/eudoc/
Dansk
Herved erklærer JVCKENWOOD, at radioudstyret
“KW-M540BT” er i overensstemmelse med Direktiv
2014/53/EU.
EU-overensstemmelseserklæringens fulde ordlyd er
tilgængelig på følgende internetadresse:
http://www.jvc.net/cs/car/eudoc/
Ελληνικά
Με το παρόν, η JVCKENWOOD δηλώνει ότι ο
ραδιοεξοπλισμός «KW-M540BT» συμμορφώνεται με
την Οδηγία 2014/53/ΕΕ.
Το πλήρες κείμενο της δήλωσης συμμόρφωσης της
ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο
διαδίκτυο:
http://www.jvc.net/cs/car/eudoc/
02_KW_M540BT_E_SAFETY.indd iii02_KW_M540BT_E_SAFETY.indd iii 12/13/2017 11:33:21 AM12/13/2017 11:33:21 AM

ENGLISH iv
Important NoticeImportant Notice
Eesti
Käesolevaga JVCKENWOOD kinnitab, et „KW-M540BT“
raadiovarustus on vastavuses direktiiviga 2014/53/EL.
ELi vastavusdeklaratsiooni terviktekst on kättesaadav
järgmisel internetiaadressil:
http://www.jvc.net/cs/car/eudoc/
Latviešu
JVCKENWOOD ar šo deklarē, ka radio aparatūra
„KW-M540BT” atbilst direktīvas 2014/53/ES prasībām.
Pilns ES atbilstības deklarācijas teksts ir pieejams šādā
tīmekļa adresē:
http://www.jvc.net/cs/car/eudoc/
Lietuviškai
Šiuo JVCKENWOOD pažymi, kad radijo įranga
„KW-M540BT“ atitinka 2014/53/EB direktyvos
reikalavimus.
Visą EB direktyvos atitikties deklaracijos tekstą galite
rasti šiuo internetiniu adresu:
http://www.jvc.net/cs/car/eudoc/
Malti
B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju
“KW-M540BT” huwa konformi mad-Direttiva
2014/53/UE.
It-test kollu tad-dikjarazzjoni ta’ konformità huwa
disponibbli fl-indirizz intranet li ġej:
http://www.jvc.net/cs/car/eudoc/
HRVATSKI / SRPSKI JEZIK
JVCKENWOOD ovim izjavljuje da je radio oprema
“KW-M540BT” u skladu s Direktivom 2014/53/EU.
Cjeloviti tekst deklaracije Europske unije o usklađenosti
dostupan je na sljedećoj internet adresi:
http://www.jvc.net/cs/car/eudoc/
ROMÂNĂ
Prin prezenta, JVCKENWOOD declară că echipamentul
radio “KW-M540BT” este în conformitate cu Directiva
2014/53/UE.
Textul integral al declaraţiei de conformitate UE este
disponibil la urmatoarea adresă de internet:
http://www.jvc.net/cs/car/eudoc/
БЪЛГАРСКИ
С настоящото JVCKENWOOD декларира, че
радиооборудването на “KW-M540BT” е в
съответствие с Директива 2014/53/ЕС.
Пълният текст на ЕС декларацията за съответствие е
достъпен на следния интернет адрес:
http://www.jvc.net/cs/car/eudoc/
Turkish
Burada, JVCKENWOOD “KW-M540BT” radyo
ekipmanının 2014/53/AB Direktifine uygun olduğunu
bildirir.
AB uyumluluk deklarasyonunun tam metni aşağıdaki
internet adresinde mevcuttur.
http://www.jvc.net/cs/car/eudoc/
Русский
JVCKENWOOD настоящим заявляет, что
радиооборудование «KW-M540BT» соответствует
Директиве 2014/53/EU.
Полный текст декларации соответствия ЕС доступен
по следующему адресу в сети Интернет:
http://www.jvc.net/cs/car/eudoc/
Українська
Таким чином, компанія JVCKENWOOD заявляє, що
радіообладнання «KW-M540BT» відповідає Директиві
2014/53/EU.
Повний текст декларації про відповідність ЄС можна
знайти в Інтернеті за такою адресою:
http://www.jvc.net/cs/car/eudoc/
02_KW_M540BT_E_SAFETY.indd iv02_KW_M540BT_E_SAFETY.indd iv 12/13/2017 11:33:21 AM12/13/2017 11:33:21 AM

About this manual
The displays and panels shown in this manual are
examples used to provide clear explanations of the
operations. For this reason, they may be different
from the actual displays or panels.
This manual mainly explains operations using the
buttons on the monitor panel and keys on the
touch panel. For operations using the remote
controller, see page 34.
< > indicates the various screens/menus/
operations/settings that appear on the touch
panel.
[ ] indicates the keys on the touch panel.
Indication language: English indications are used
for the purpose of explanation. You can select the
indication language from the <SETUP> menu.
(Page 32)
ContentsContents
Component Names and Operations...............3
Basic Operations.................................................3
Turning on the power..................................................................3
Turning off the power..................................................................3
Turning off the AV source..........................................................3
Adjusting the volume...................................................................3
Attenuating the sound................................................................3
Turning off the screen..................................................................3
Getting Started ...................................................4
Initial settings.....................................................................................4
Setting the security code ...........................................................4
Calendar/clock settings...............................................................5
Various Screens and Operations .....................5
Touch screen operations............................................................5
Home screen......................................................................................5
Source control screen...................................................................7
List/setting screen...........................................................................9
Video.....................................................................9
USB......................................................................10
iPod/iPhone.......................................................11
Apps—WebLink™/Waze..................................12
Tuner...................................................................14
Spotify ................................................................17
Other External Components ..........................19
Rear view camera.........................................................................19
AV-IN.....................................................................................................19
Bluetooth® .........................................................20
Information ......................................................................................20
Preparation....................................................................................... 20
Connection.......................................................................................20
Bluetooth mobile phone......................................................... 22
Bluetooth audio player............................................................. 25
Bluetooth mobile phone settings......................................26
Settings ..............................................................26
Audio settings ................................................................................ 26
Display settings..............................................................................31
User interface settings............................................................... 32
Camera settings ............................................................................32
Special system settings.............................................................33
Bluetooth settings .......................................................................34
Security settings............................................................................ 34
Remote Controller............................................34
Preparation....................................................................................... 34
Basic operations............................................................................ 35
Searching for a station frequency directly....................36
JVC Remote APP........................................................................36
Installation and Connection...........................36
Before installation ........................................................................36
Installing the unit..........................................................................38
Removing the unit .....................................................................38
Connecting external components....................................38
Wiring connection....................................................................... 39
References .........................................................40
Maintenance ...................................................................................40
More information......................................................................... 40
Troubleshooting...............................................42
Specifications....................................................44
Trademarks and licenses.......................................................... 46
2ENGLISH
03_KW_M540BT_E_Body01.indd 203_KW_M540BT_E_Body01.indd 2 12/13/2017 11:33:31 AM12/13/2017 11:33:31 AM

Component Names andComponent Names and
OperationsOperations
Basic OperationsBasic Operations
1Volume +/–buttons
2FNC button
• (Press) Turns on the power.
• (Press) Pops up the short-cut menu while the
power is on.
• (Hold) Activates the voice dialing.
3Monitor panel
4Screen (touch panel)
5Remote sensor*
* DO NOT expose the remote sensor to bright light (direct sunlight
or artificial lighting).
Turning on the power
Turning off the power
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
2 Turn off the power.
Turning off the AV source
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
2 Turn off the AV source.
Adjusting the volume
You can adjust the volume (00 to 40) by pressing +to
increase and pressing –to decrease.
• Holding +increases the volume continuously to
level 15.
Attenuating the sound
On the source control screen, touch as follows:
The ATT indicator lights up.
To cancel attenuation: Touch [ ] again.
Turning off the screen
1 Display the pop-up short-cut menu.
2 Turn off the screen.
(Hold)
To turn on the screen: Press FNC on the monitor
panel or touch the screen.
3
ENGLISH
03_KW_M540BT_E_Body01.indd 303_KW_M540BT_E_Body01.indd 3 12/13/2017 11:33:33 AM12/13/2017 11:33:33 AM

Getting StartedGetting Started
Initial settings
When you power on the unit for the first time, the
<Initial SETUP> screen appears.
Perform the initial settings.
E.g. Initial settings screen
Once completed, a warning message appears. Touch
[Agree] to display the Home screen.
[Language]
Select the text language used for on-screen
information.
Touch [Language Select], then select the language.
• American English(en)/British English(en) (Initial)/
Nederlands(nl)/Français(fr)/Deutsch(de)/
Italiano(it)/Español(es)/(ar) /Ελληνικά(el)/
Português(pt)/Čeština(cs)/Polski(pl)/
Magyar(hu)/Руccĸий(ru)/ (th)/
Türkçe(tr)/ (zh)/(he) /(fa) /
BahasaMelayu(ms)/Bahasa Indonesia(id)
[Clock] (Page 5)
Set the calendar and clock time.
Make the settings for [Clock], [Time Zone] or [Clock
Adjust].
[Display] (Page 31)
Make the settings to adjust the display.
[Camera] (Page 32)
Make the settings to display the picture from the
connected rear view camera.
[DEMO]
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
Setting the security code
You can set a security code (four-digit number of
your choice) to protect your receiver system against
theft. Once you set the security code, you are required
to input the security code when the power is on to
reconnect the battery.
1 Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch as follows:
[Security] [Security Code Set]
2 Enter a four-digit number (1), then
confirm the entry (2).
• To clear the last entry, touch [BS].
• To cancel the setting, touch [ ].
3 Enter the four-digit number entered in
step 2 and touch [Enter] again to confirm
your security code.
To change the security code: Touch [Security Code
Change] on the <Security> screen on step 1, then
repeat steps 2 and 3.
To clear the security code: Touch [Security Code
Cancellation] on the <Security> screen on step 1,
then repeat step 2.
4ENGLISH
03_KW_M540BT_E_Body01.indd 403_KW_M540BT_E_Body01.indd 4 12/13/2017 11:33:36 AM12/13/2017 11:33:36 AM

Calendar/clock settings
1 Display the <User Interface> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [User
Interface].
2 Set the date and clock.
[Clock]
Select the method to set the date and clock.
• RDS-SYNC (Initial): Synchronizes the clock with
the FM Radio Data System.
• Manual: Sets the date and clock manually.
[Time Zone]*
Select the time zone for your area.
[Clock Adjust]*
Set the date and clock manually when [Clock] is
set to [Manual].
Touch [J]/[K]to adjust the date (year/month/
date), then clock (hour/minute). To finish setting,
touch [Set].
* Available when [Clock] is set to [Manual].
Getting StartedGetting Started Various Screens and OperationsVarious Screens and Operations
You can display or change to other screens at any time
to show information, change the AV source, change
the settings, etc.
Touch screen operations
To perform operations on the screen, you need to
touch, touch and hold, flick or swipe to select an item,
display setting menu screen or to change the page,
etc.
Touch
Touch the screen gently to select an
item on the screen.
Touch and hold
Touch the screen and keep your
finger in place until the display
changes or a message is displayed.
Flick
Slide your finger to the left or right on
the screen to change the page.
Swipe
Slide your finger up or down on the
screen to scroll the screen.
Home screen
When you turn on the power for the first time, the
Home screen appears.
• You can customize the Home screen.
• To display the Home screen from other screens, press
FNC on the monitor panel, then touch [Home] on
the pop-up short-cut menu.
Phone
Jan.Mon. 1
10:00
USB
Song Title
Waze
USB
WebLink
Touching the operation keys performs the following
actions:
1Short-cut playback source keys
2Current source information
• Touch to display the current playing source
control screen.
• Touching []scrolls the text if not all of the text
is shown.
3Displays the <SETUP> screen
4Widget
• You can change the widget by touching [ ]/[ ].
• Touch the widget to display the detailed screen.
5Displays all playback sources and options
6Displays the phone control screen
5
ENGLISH
03_KW_M540BT_E_Body01.indd 503_KW_M540BT_E_Body01.indd 5 12/13/2017 11:33:38 AM12/13/2017 11:33:38 AM

Available playback sources and options
Touch 5to display the source/option selection screen.
USBWebLink
iPodTuner
Waze
AV-INPower Off
E.g. Source/option selection screen
Touching the operation keys performs the following
actions:
[WebLink] Switches to the WebLink™
application.
[Waze] Switches to the Waze application.
[USB] Plays files on a USB device.
[Tuner] Switches to the radio broadcast.
[Power Off] Turns off the power.
[iPod] Plays an iPod/iPhone.
[AV-IN] Switches to an external component
connected to the AV-IN input
terminal.
[BT Audio] Plays a Bluetooth audio player.
[Spotify] Switches to the Spotify application.
[Audio] Displays the sound adjustment
screen.
[AV Off] Turns off the AV source.
[ ] Displays the <SETUP> screen.
Various Screens and OperationsVarious Screens and Operations
To change the page: Touch [ ]/[ ]. Current page is
shown by the page indication on the bottom of the
screen.
To return to the Home screen: Touch [ ] on the
source/option selection screen.
Customizing the source/option selection
screen
You can arrange the items to display on the source/
option selection screen.
1 Select an item to move.
Touch and hold the item you want to move until
boxes appear around the icons.
2 Drag the selected item to the position you
want to move it to.
USBWebLink
iPodTuner Power Off
Waze
AV-IN
E.g. Source/option selection screen
About short-cut playback source keys on the
Home screen
The three items displayed on the top of the source/
option selection screen with large icons are also
shown on the Home screen as the short-cut playback
source keys. You can set the source keys which you use
frequently and access quickly from the Home screen.
Phone
Jan.Mon. 1
10:00
USB
Song Title
6ENGLISH
03_KW_M540BT_E_Body01.indd 603_KW_M540BT_E_Body01.indd 6 12/13/2017 11:33:41 AM12/13/2017 11:33:41 AM

Various Screens and OperationsVarious Screens and Operations
Source control screen
You can perform the playback operation from the
source control screen during playback.
• The operation keys and information displayed vary
depending on the selected source/file type being
played.
• If the operation keys are not displayed on the screen,
touch the screen to show them.
E.g. Common audio playback source screen
1Playback source or media type
2Picture data/artwork (shown if the file contains
artwork)
3For video: Hides the operation buttons on the
screen while video is played
• Touch the screen to restore the operation
buttons.
For audio: File format
4Repeat/random playback mode keys*
5Information about connected device
• For Bluetooth device: Signal strength and battery
level (only when the information is acquired from
the device)
6Track/file/song/video information
• Touching []scrolls the text if not all of the text
is shown.
7Clock display
8Displays the track/file/station list
9Displays/hides other available operation keys*
pDisplays the source/option selection screen
qOperation keys*
wSecondary screen
Each time you touch [ ]/[ ] , the items shown on
the secondary screen change as follows:
• Indicators: Displays the current source conditions,
etc.
The followings are the common indicators:
−ATT: The sound is attenuated.
−LOUD: The loudness is active.
−MUSIC/VIDEO: Music/video file is played back.
• Short-cut buttons: Changes the source from
those you have located on the Home screen.
eDisplays the phone control screen
* See the following “Common operation keys on source control
screen”.
Common operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• Available operation keys differ depending on the
selected source or connected device.
Touching the operation keys performs the following
actions:
4
[ ]* Selects repeat playback mode.
• : Repeat one
• : Repeat folder
• ALL: Repeat all
• (gray): Off
[ ]* Selects random playback mode.
• : Random folder
• ALL: Random all
• (gray): Off
* About playback mode:
–Available playback mode differs depending on the source, file
type, connected device, etc.
–You cannot activate repeat playback mode and random
playback mode at the same time.
7ENGLISH
03_KW_M540BT_E_Body01.indd 703_KW_M540BT_E_Body01.indd 7 12/13/2017 11:33:42 AM12/13/2017 11:33:42 AM

Various Screens and OperationsVarious Screens and Operations
9
[]Displays other available operation keys
besides those shown on q.
• To hide the window, touch [ ].
[SETUP] Displays the setting screen of the
current playback source.
[ ][ ] Selects a folder.
q
[ ] Attenuates/restores the sound.
[ ] Displays the folder list/track list/audio
menu/video menu.
[S]/[T]• (Touch) Selects an item (chapter/
folder/track/audio file/video file).
• (Hold) Reverses/forwards search.
[IW]Starts/pauses playback.
Playback control by touch operations
You can also control playback by moving your finger
on the touch panel as follows (for some sources, the
gesture control is not available).
• Sliding the finger towards up/down: Functions same
as pressing [ ]/[ ].
• Sliding the finger towards left/right: Functions same
as pressing [S]/[T].
• Moving your finger clockwise or counterclockwise:
Increases/decreases the volume.
Using the pop-up short-cut menu
While displaying the source control screen, you can
jump to another screen by touching the operation
keys on the pop-up short-cut menu.
1 Display the pop-up short-cut menu.
2 Select an item to jump.
Home PhoneDISP Camera Screen Adjust Equalizer
E.g. Pop-up short-cut menu screen
1Displays the Home screen.
2Switches the screen. (Touch)
• The screen switched to depends on the
<DISP Key> setting. (Page 32)
• Turns off the display. (Hold)
3Displays the phone control screen. (Page 23)
4Displays the picture from the connected rear
view camera.
5Displays the picture adjustment screen.
(Page 10)
6Displays the <Equalizer> screen.(Page 28)
7Closes the pop-up short-cut menu.
8Changes the playback source.
• The three short-cut playback source keys
displayed on the Home screen are displayed
on the short-cut menu.
9Displays the phone control screen.
8ENGLISH
03_KW_M540BT_E_Body01.indd 803_KW_M540BT_E_Body01.indd 8 12/13/2017 11:33:46 AM12/13/2017 11:33:46 AM

Various Screens and OperationsVarious Screens and Operations
Using touch screen operation during
playback
Touching the areas performs the following actions:
1Displays the source control screen.
2Goes to the previous track.*
3Goes to the next track.*
* Not available for video from an external component (AV-IN).
List/setting screen
The followings are the common operation keys which
appear on the list/settings screen.
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• Available operation keys differ depending on the
setting screens. Not all the following operation keys
are shown on every screen.
Touching the operation keys performs the following
actions:
1Displays list type selection window.
2Selects the file type ([ ]: audio/[ ]: video).
3Exits from the current screen or returns to the
previous screen.
4Scrolls the text if not all of the text is shown.
5Play/search keys
• [IPlay]: Plays all tracks in the folder containing
the current track.
• [ A-Z]: Enters alphabet search to list the items
in alphabetical order. When a keypad appears,
touch the first letter you want to search for.
• [ Top]: Returns to the root folder.
• [ Up]: Returns to the upper layer.
6Changes the page to display more items.
• [J]/[K]: Scrolls the page.
• [ ]/[ ]: Jumps to the top or bottom page.
VideoVideo
Playback operations
Video playback information on the source
control screen
E.g. Video playback source control screen
1Media type
2Hides the operation buttons on the screen.
• Touch the screen to restore the operation
buttons.
3Repeat/random playback mode keys
4Current playback item information/audio format
5Playback status/playing time
6Indicators
• VIDEO: Lights up when video is played.
9
ENGLISH
03_KW_M540BT_E_Body01.indd 903_KW_M540BT_E_Body01.indd 9 12/13/2017 11:33:49 AM12/13/2017 11:33:49 AM

VideoVideo
Adjusting the picture
1 Display the pop-up short-cut menu.
2 Display the picture adjustment screen.
On the pop-up short-cut menu, touch as follows:
3 Adjust the picture.
<Backlight> Adjusts the brightness of the
backlight. (−4 to +4)
<Contrast> Adjusts the contrast. (−4 to +4)
<Brightness> Adjusts the brightness. (−4 to +4)
<Color>*1 Adjusts the color. (−4 to +4)
<Tint>*2 Adjusts the tint. (−4 to +4)
<Aspect> Selects the aspect ratio.
• Full: Changes the aspect ratio of
video and displays fully on the
screen.
• Normal: Displays the video in
the aspect ratio of 4:3.
• Auto*3: Displays the video fully
on vertical or horizontal with no
ratio change.
• Adjustable items are different depending on the
current source.
• You can perform this function only when you have
applied the parking brake.
*1 Adjustable only during playback.
*2 Available only when the “AV-IN” or camera screen is displayed.
*3 Selectable only when video from a USB device is played back.
USBUSB
You can connect a USB mass storage class device such
as a USB memory, digital audio player, etc. to the unit.
• For playable file types and other information, see
page 40.
• You cannot connect a PC or portable HDD to the
USB input terminal.
• You cannot connect a USB device via a USB hub.
Connecting a USB device
USB device (commercially available)
Rear panel
10 ENGLISH
03_KW_M540BT_E_Body01.indd 1003_KW_M540BT_E_Body01.indd 10 12/13/2017 11:33:52 AM12/13/2017 11:33:52 AM

USBUSB
Playback operations
Playback information and key operation
• For playback information, see “Source control screen”
on page 7.
• For key operations on the touch panel, see “Common
operation keys on source control screen” on
page 7.
• All tracks in the USB device will be played repeatedly
until you change the source or disconnect the USB
device.
Selecting a folder/track on the list
1 Display the folder/track list.
On the source control screen, touch as follows:
2 Select the list type.
3 Select the desired track.
• Repeat the procedure until you select the desired
track.
• For details about the list operation, see
page 9.
From <Category List>:
1Select the file type ([ ]: audio/[ ]: video).
2Select a category, then the item in the selected
category.
From <Link Search>:
1Select the file type ([ ]: audio/[ ]: video).
2Select the tag type to display a list of contents
that contains the same tag as the track/file
currently being played, then select the item.
From <Folder List>:
Select the folder, then the item in the selected
folder.
iPod/iPhoneiPod/iPhone
Connecting an iPod/iPhone
• For playable iPod/iPhone types and other
information, see page 41.
• You cannot watch video.
Wired connection
Rear panel
iPod/iPhone (commercially available)
USB Audio cable for iPod/iPhone: KS-U62 (optional
accessory)
Bluetooth connection
Pair the iPod/iPhone with this unit via Bluetooth.
(Page 20)
11
ENGLISH
03_KW_M540BT_E_Body01.indd 1103_KW_M540BT_E_Body01.indd 11 12/13/2017 11:33:53 AM12/13/2017 11:33:53 AM

iPod/iPhoneiPod/iPhone
Playback operations
Playback information and key operation
• For playback information, see “Source control screen”
on page 7.
• For key operations on the touch panel, see “Common
operation keys on source control screen” on
page 7.
Selecting an audio file from the menu
1 Display the list.
On the source control screen, touch as follows:
2 Select the list type.
3 Select the desired track.
• Repeat the procedure until you select the desired
track.
• For details about the list operation, see
page 9.
From <Category List>:
Select a category, then the item in the selected
category.
• Available categories differ depending on the type
of iPod/iPhone.
From <Link Search>:
Select the tag type to display a list of contents that
contain the same tag as the track/file currently
being played, then select the item.
Apps—WebLink™/WazeApps—WebLink™/Waze
You can display and control the App on the unit
while your smartphone is connected to the USB input
terminal.
Preparation: Be sure to ground the PRK SW lead.
(Page 39)
Available Apps
You can use the following Apps on this unit. Install the
WebLink™ App and/or Waze App on your smartphone
beforehand.
WebLink™
WebLink™ enables you to use the following Apps with
the unit.
• Media Player
• Yelp
• YouTube
• OpenWeatherMap
Waze
Waze is the world's largest community based traffic
and navigation App. Join other drivers in your area
who share real-time traffic and road info, saving
everyone time and gas money on their daily commute.
• To use Waze on the unit, you need to install Waze
on your smartphone and connect WebLink™ before
starting Waze.
12 ENGLISH
03_KW_M540BT_E_Body01.indd 1203_KW_M540BT_E_Body01.indd 12 12/13/2017 11:33:56 AM12/13/2017 11:33:56 AM

Apps—WebLink™/WazeApps—WebLink™/Waze
Connecting a smartphone
Android™ device
(commercially available)
iPhone (commercially
available)
USB cable (commercially available)
Rear panel
USB Audio cable for iPod/iPhone:
KS-U62 (optional accessory)
• When the smartphone is connected to the unit and
“WebLink” is selected as the source, a confirmation
message to communicate with each other appears
on the smartphone. Touch [Allow] to establish
connection, or [Ignore] to cancel the connection.
• You can check the connection status on the
WebLink™ screen on your smartphone.
Start playback
1 Select “WebLink”/“Waze” as the source.
• To use WebLink™: Select “WebLink”.
• To use Waze: Select “Waze”.
2 Operate on the unit to select App.
• On the “WebLink” source screen, you can also
operate on the touch panel as follows:
[ ] • Displays the main menu of the
“WebLink” source screen.
• Exits the current App.
[ ] • Returns to the previous screen.
• Exits the current App.
3 Operate on your smartphone.
• When you are asked to communicate between
your smartphone and the unit, touch [Allow] to
proceed.
• If App does not start while using “WebLink”, start
the App on your smartphone.
Switching to the App screen while listening
to the another source
You can display the App screen while listening to the
other source.
• Set <DISP Key> to [App] on the <User Interface>
screen beforehand. (Page 32)
1 Display the pop-up short-cut menu.
2 Switch to the App screen.
On the pop-up short-cut menu, touch as follows:
• Each time you touch the key, the screen switches
between the current source and App screen.
13
ENGLISH
03_KW_M540BT_E_Body01.indd 1303_KW_M540BT_E_Body01.indd 13 12/13/2017 11:33:57 AM12/13/2017 11:33:57 AM

Listening to the radio
Playback information on the source control
screen
FM 01
FM 02
FM 03
FM 04
TUNER
E.g. Tuner source control screen
1Displays/hides other available operation keys*
2Preset no.
3Changes the seek mode for [S]/[T]
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one after
another
• MANUAL: Manual search
4Text information
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [ ] switches the information (e.g.
frequency, PS name, Radio Text, title, artist, etc.).
−The availability of the information vary
depending on the reception, selected station.
TunerTuner
5Preset list
6Selects the band (AM/FM)
7Operation keys*
8Indicators
• TI: Lights up in white when receiving the traffic
information, and lights in orange when being
standby for Traffic Information Reception.
• ST: Lights up when receiving stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
• AF: Lights up when the Network-Tracking
Reception is activated.
• EON: Lights up when a Radio Data System station
is sending EON signals.
• LO.S: Lights up when Local Seek is activated.
• NEWS: Lights up when News Standby Reception
is activated.
• RDS: Indicates the status of the Radio Data
System station reception when the Network-
Tracking Reception is activated. (Page 16)
−Lights in white: Radio Data System station is
being received.
−Lights in orange: Radio data System station is
not being received.
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 7.
Touching the operation keys performs the following
actions:
1
[TI]*1 (For FM Radio Data System features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into a station providing Radio
Data System signals.
• The volume adjustment for traffic
information is automatically
memorized. The next time the unit
switches to traffic information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[SSM]*1 Presets stations automatically.
[MONO]*1 Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
14 ENGLISH
03_KW_M540BT_E_Body01.indd 1403_KW_M540BT_E_Body01.indd 14 12/13/2017 11:33:59 AM12/13/2017 11:33:59 AM

[SETUP]*1 Displays the <TUNER SETUP> screen.
[PTY]*1*2 (For FM Radio Data System features)
Enters PTY search mode.
1Touch a PTY code.
2Touch [Search] to search for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
• You can set the language displayed
for the PTY Search on the <TUNER
SETUP> screen. (Page 16)
[LO.S]*1 You can tune in FM stations only with
strong signals—Local Seek.
• ON: Tunes in only to FM stations with
sufficient signal strength. The LO.S
indicator lights up.
• OFF (Initial): Deactivates the function.
7
[S]/[T]Searches for a station.
• The search method differs according
to the selected seek mode.
*1 Appears only when FM is selected as the source.
*2 Only British English/Espanol/Francais/Nederlands/Norsk/
Portugues/Svenska/Deutsch are available for the text language
here. If another language has been selected in <Language>
(Page 4), the text language is set to English.
TunerTuner
Storing preset stations in the memory
You can preset 15 stations for FM and 5 stations for
AM.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
A confirmation message appears. Touch [Yes].
The local stations with the strongest signals are found
and stored automatically.
Manual presetting
1 Select the band, then tune in to a station
you want to store.
• See “Playback information on the source control
screen” on page 14 for details.
2 Display the preset list.
On the source control screen, touch as follows:
3 Select a preset number to store into.
TUNER
(Hold)
The station selected in step 1 is stored into the
preset number you have selected.
To hide the preset list: Touch [ ] on the preset list.
Selecting a preset station
1 Select the band, then display the preset
station list.
On the source control screen, touch as follows:
2 Select a preset station.
TUNER
To hide the preset list: Touch [ ] on the preset list.
15
ENGLISH
03_KW_M540BT_E_Body01.indd 1503_KW_M540BT_E_Body01.indd 15 12/13/2017 11:33:59 AM12/13/2017 11:33:59 AM

TunerTuner
Settings for tuner reception
1 Display the <TUNER SETUP> screen.
On the source control screen, touch as follows:
SETUP
2 Make the settings.
[NEWS]*1
• 00min to 90min: Activates New Standby
Reception by selecting the period of time to
disable the interruption. The NEWS indicator
lights up.
• OFF (Initial): Deactivates the function.
[AF]
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in
to another FM Radio Data System station of the
same network with stronger signals— Network-
Tracking Reception (AF: Alternative Frequencies).
• ON (Initial): Switches to another station. The
program may differ from the one currently
received.*2
• OFF: Deactivates the function.
[Regional]
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in
to another FM Radio Data System station of the
same program with stronger signals— Network-
Tracking Reception (Regional).
• ON (Initial): Switches to another station
broadcasting the same program.*2
• OFF: Deactivates the function.
[Auto TP Seek]
When traffic information station reception is poor,
the unit automatically searches for another station
that can be received better—Auto TP Seek.
• ON (Initial): Automatically searches for a station
with better reception for traffic information if the
current reception of current station is poor.
• OFF: Deactivates the function.
[Language Select]
Select the language to display for PTY search.
• British English (Initial)/Espanol/Francais/
Nederlands/Norsk/Portugues/Svenska/
Deutsch
To close the setting window, touch [Close].
*1 The volume adjustment for Traffic Information is automatically
memorized. The next time the unit switches to Traffic
Information, the volume is set to the previous level.
*2 The RDS indicator lights up when the Network-Tracking
Reception is activated.
–Lights in white: Radio Data System station is being received.
–Lights in orange: Radio data System station is not being
received.
16 ENGLISH
03_KW_M540BT_E_Body01.indd 1603_KW_M540BT_E_Body01.indd 16 12/13/2017 11:34:01 AM12/13/2017 11:34:01 AM