K-array KK 200 User manual

www.k-array.com
HP Sound Equipment s.r.l. Viale Roma 7/i - 50037 - San Piero a Sieve (FI), Italy
tel. [phone] - fax. [phone] - e-mail: [e-mail]
DATASHEET
The KK200 is a compact, line array element comprised of 32 x
2” neodymium transducers in a strong stainless steel chassis.
Its wide dispersion pattern can be con gured horizontally
or vertically. A number of KK200 speakers can also be put
together in multiple array con gurations. Due to their slim
pro le and minimum distance between drivers they exhibit
excellent phase coherent pattern control.
The speaker has an impedance of 16 Ohms eliminating the
need for 70volt transformers in distributed systems. The
KK200 reproduces the full vocal frequency range with clear
intelligibility. This can be augmented with the KKS50 or KL12
sub to extend the operating frequency range.
A variety of accessories provide numerous mounting options
for permanent and portable installations.
KA series ampli ers have presets speci cally optimized for
KK200 applications.
All KK200 components are designed by the K-array R&D
department and custom made under the K-array quality
control system.
KK200
3D line-array element
Features:
• Unique performance-to-size ratio
• Vertical, Horizontal and 3D line-array applications
• Multiple 2” long-excursion full-range cone drivers
• Wide horizontal coverage
• Electronically protected
• Integrated mounting hardware and accessories
• Selectable 4 Ohm or 16 Ohm impedance
• Selectable channel A or B
• Top quality components for outstanding
performance
• Weather proof, suitable for outdoor installations
• Available in black or white
Applications:
• Theatre, Club, Churches
• Front  ll and under-balcony  ll
• Portable and installed AV systems
• Stage and AV studio monitoring

vertical
horizontal
500 Hz
250 Hz
8 KHz
4 KHz
1 KHz
KK200
Acoustics
Power handling 600 W (AES)
Impedance 4W or 16W
Operating frequency range 150 Hz - 19 KHz.
SPL 1W / 1mt 98 dB
Maximum SPL 124 dB continuous - 130 dB peak
Coverage
Horizontal 100°
Vertical 7°
Cross over
Type External Crosover required
Frequency 150 Hz, 24 dB/oct suggested minimum
Transducers
Full range 32 x 2” Neodymium magnet with 0.75” voice coil
Wiring CH.1 (1+ 1-) CH.2 (2+ 2-)
Audio Input
Connectors 2 x 4-pin Speakon
Selection Switch
Channel CH.1 - CH.2
Impedance 16W - 64W
Recommended Ampliers
Type KA10, KA10-10, KA40 (for up to 4 x KK200/channel)
Physical
Dimensions 5.6 x 201.5 x 7 cm (2.2” x 79.33” x 2.76”)
Weight 8 Kg (17.63 lbs)
New materials and design are introduced into existing products
without previous notice. Present systems may differ in some
respects from those presented in this brochure.
90°
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0° front
back
90°
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0° front
back
Accessories:
• K-KLINK: Link hardware for Kobra line
array elements
• K-KFLY: tilter for own line array
applications
• K-KCLAMP: Clamp for hanging
• K-KWALL: Bracket for wall xing
• K-KWIRE: 2-channels link cable
• K-K35MM: 35mm adapter