König GAME-WHEEL30 User manual

GAME-WHEEL30
2.4GHz Wireless Wheel
Universal Wireless Steering Wheel
PlayStation®/XboxTM / GameCubeTM
Welcome
Thank you for purchasing the Universal Wireless Steering Wheel for use with PlayStation®2, or
XboxTM or GameCubeTM game console. The Universal Wireless Steering Wheel has dual motors
in supported games. Before operating, thoroughly familiarize yourself with this manual, so that
you completely understand the functions. Keep this user manual for future reference.
Wireless receiver overview:
Mode Key Description:
Key Assign of Video Game System:
How to use the Wireless Steering Wheel
Place 3 "AA" batteries into the wireless wheel and connect the wireless receiver to your desired
gaming console. First turn on the gaming console, and then turn on the wireless wheel via the
power switch to be “ON”, The Power LED should be green.
1- Auto scan mode:
Powering on the console and the wheel via the power switches;
The wheel will search for a signal and the receiver’s orange LED will illuminate when the
connection has been made.
2- Manual scan mode:
If you are unable to get a connection with the wireless wheel you may make the
connection using the manual scan mode;
Pressing the <connect> button on the receiver, then immediately press <select +L3>
button;
The orange LED will illuminate to indicate that the connection is a success. This may take
as long as 15 seconds.
Note: If 2.4GHz wireless wheel does not find a connection, please repeat 1 & 2 all over again to
insure that your operation is right. If not again, please check your video gaming console for other
issues.
Control Modes and Functions
There are two different modes you can choose from, depending on your style of play. You can
change modes by pressing the MODE button. The mode LED will be on or off depending on
which mode you are in.
ENGLISH
INSTRUCTIONS
EN

Switching from digital to analog modes:
A) Analog Mode -When the mode LED is on, the wireless Steering wheel is in analog mode.
Games that are Vibration Function Compatible will only vibrate if the Wheel is in analog
mode.
B) Digital Mode-When the mode LED is off, the wireless Steering wheel is in digital mode,
and the analog function is disabled. This is the standard mode for PSoneTMand
PlayStation®.
Directional Pad
The D-pad controls the direction in which objects moves. It is also used for navigating menus
and is the preferred control for precision in direction when using the program function.
Action Buttons
These buttons are used to perform various actions, depending on the game. For more details,
see the game’s instruction manual.
Start Button
This button is generally used to make selections in the menu and for starting or pausing the
game. For more details, see the game’s instruction manual.
Select Button
This is a standard button that allows you to do various things, depending on the game. For more
details, see the game’s instruction manual.
Mode Button
The Wireless steering wheel has two different modes, analog and digital mode. The red LED
light will be on when the wireless steering wheel is in analog mode, and off when the Wheel is in
digital mode.
Macro Button
This button allows you to relocate buttons. See the ”Macro Function” section of this instruction
manual.
Sleep and wake up:
This product will automatically enter sleep mode after 5 minutes of non-use in order to
extend the battery life.
To exit sleep mode (wake up), please press the <start> button.
The wireless receiver’s orange LED will glow to indicate the connection has been re-made.
Macro Function
How to relocate the Wireless Steering Wheel:
Press the MACRO button until the green LED lights to indicate that the programming function is
active.
Select the button ( , L1, L2, R1, R2, up, down, left, down, Brake Pedal, Accelerate
Pedal ) to be programmed by pressing that button until the green LED flashes.
Press the desired button(s) to be programmed into the selected button above.
The green LED will be extinguished; the desired button assignments are finished.
Repeat the procedures above to program another button.
To reset the Universal Wireless Wheel back to its default setting:
1. Press the Macro Button to turn on the programming function. The green LED will be light
on to indicate that the programming function is active.
2. Press the button you wish to reset, the green LED lights.
3. Press the button you wish to reset again, the green LED will turn off.
DECLARATION OF CONFIRMITY
We declare under our responsibility that the product;
Brand name: KÖNIG
Model: GAME-WHEEL30
Description: RF 2.4Ghz wireless gamewheel
Is in conformity with the following standards;
EN 300 440-2 V1.4.1 (2001-09)
EN 301 489-1/-3 V1.4.1 (2002-08)
EN 60950-1 (2001)
Following the provisions of the 1999/5/EC R&TTE Directive.
Conform this regulation it’s allowed to use this product in
all European Community & EFTA countries.
Nedis BV is not responsible for the use of this product outside
the European Community & EFTA countries.
WARNING:
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician if service is required. Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water of moisture.
WARRANTY:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
GENERAL:
Designs and specifications are subject to change without a notice.
GameCube® is a registered trademark of Nintendo. This product is not sponsored, endorsed or
approved by Nintendo.
PSoneTM PlayStation® and PlayStation®2 are registered trademarks of Sony. This product is
not sponsored, endorsed or approved by Sony.
Xbox® is a registered trademark of Microsoft. This product is not sponsored, endorsed or
approved by Microsoft.
EN
EN