Page 11 Page 12
1-year
K-Tool International warrants, to the original retail purchaser
only, that this product will be free from defects in materials
and workmanship for 1 year from the date of purchase.
However, this warranty will automatically terminate if the
original retailer sells or transfers the product to any other
party. For the warranty to be effective, the ‘receipt’ or a copy
of the ‘bill of sale’ must be shown that the unit was purchased
from an “Authorized K-Tool International Dealer”.
(Note: Even if you have a K-Tool unit, we will not be able to
honor the warranty unless you have a receipt which clearly
state that you have brought the product from an
“Authorized K-Tool International Dealer”.)
**The receipt cannot be torn or unreadable. If, within 1 year
from the date shown on the receipt or the bill of sale, the unit
fails due to a defect in workmanship or material as determined
upon examination at the factory, K-Tool will, at its option and
at no charge, to repair or replace the defective components of
the unit. All replaced parts and products become the property
of K-Tool. Products replaced or repaired under this warranty
will be returned to the original retail purchaser, within a
reasonable time, and with freight prepaid.
Furthermore, this Warranty shall not apply if:
1. There are missing parts in the unit
2. Damage to the unit was caused by accident, disaster,
abuse, misuse, negligence, inadequate packing or shipping
procedures, commercial use, or voltage inputs in excess of
the rated maximum of the unit. IT IS THE PURCHSER
RESONSIBLITY!!! K-Tool is under no obligation to
replace or repair the unit.
3. The unit was opened, modified, or repaired by
unauthorized personnel
4. The unit was not used correctly as outlined in the
installation instructions
5. The unit is without original packaging and receipt
