Kaffit K96L User manual

USER MANUAL
Coffee machine KAFFIT.COM K96L
ENG

1
The appliance and its parts 3
4
5
5
6
Introduction
Safety instructions
Precautions
Prohibitions 6
7
Intended use
7
7
7
7
8
8
8
2
12
13
13
Making beverages
Making beverages by pressing the touch button-indicator
Making cappuccino
Preparing a serving of hot milk 14
14
14
Permanent settings in programming mode
15
17
17
18
19
Shortcut function
Shortcu function. "RINSING" touch icon
Shortcut function. "RINSE MILK UNIT" touch icon
Shortcut function. "STATISTICS" touch icon
Shortcut function. "SCREEN LOCK" touch icon 19
20
20
26
26
28
29
30
30
31
32
Machine settings
Beverage settings
Water settings
Water hardness settings
Manual and Automatic rinsing
Using a water filter
Language settings
Emptying water system (Emptying the System for Transportation)
Automatic switch ON/OFF
Programming ON/OFF time settings
Operating time settings 33
2
Contents
Controls and display
Symbol description
1
Permanent settings in programming mode
Settings in the programming mode
Instruction for first-time use
Electrical connection
Filling the water tank
Filling the coffee bean hopper
Grinder adjustment lever for setting the level of grinding
Power on
Power off

32
34
35
36
37
38
RESET (to factory settngs)
Selection of water supply mode
Volume adjustment setting
Factory reset settings
Factory reset. ALL BEVERAGES item
Machine settings. Return to the factory settings 39
Statistics 40
42
44
45
Advertising settings
Welcome Ads
ADs while making a beverage
ADs after the beverage preparation 46
Security&Privacy 48
49
50
51
Individualization
Confirming the cup in position
Beverage adjustment
Protection against accidental pressing 52
ABOUT EQUIPMENT 53
54
54
54
55
56
Water connection
Water connection group
Step 1. Technical connection to the water supply
Step 2. Service settings for connecting to the water supply
Disposal of coffee waste
Waste water discharge 56
56
57
59
60
63
64
64
64
65
Maintenance
Cleaning brewing unit with a tablet
Cleaning the milk unit
Descaling the coffee machine
Cleaning coffee grounds container and drip tray
Cleaning water tank
Cleaning the bean hopper
Disassembling and cleaning the Auto Cappuccino system
Cleaning the milk pipe
Daily care 65
Additional functionality: payment system 65
Trouble-shooting 66
Display messages 67
68
Transportation and recycling
Recycling. 68
Technical Data 68
1. Bean container lid
2. Water tank lid
3. Water tank
4. Drip tray lid
5. Coffee ground container
6. Drop tray
7. Bean hopper
8. Grinder adjustment lever
9. Grind lever lid
10. Hot water spout
11. Coffee spout - 2 pcs.
12. Milk cream spout - 2 pcs.
13. Power switch
14. Power cord
The appliance and its parts
Model K96L

54
1. Setting touch icon
2. Beverage touch icons
3. ON/OFF button
4. Shortcut menu touch buttons
Introduction
Thank you for choosing the K96L fully automatic coffee machine.
The coffee machine must only be used to prepare coffee and coffee drinks with milk. We
are not responsible for the consequences of any misuse of the coffee machine. Please
read the contents of the instruction manual carefully.
Please keep this manual for future reference at any time. Before using the coffee
machine, read this user manual carefully and familiarize yourself with the technical
data on page 68.
Damage caused by failure to follow the instruction manual is not covered by the
warranty. Keep this instruction manual for the coffee machine.
Safety instruction
Please read and carefully follow the following important safety instructions.
• Your coffee machine can be connected to the water line. Act in accordance with this
instruction to connect the water supply correctly.
•
•
• Watch your water supply! If the water is turned off and the pump is idle for some time, it
will break. THIS IS NOT COVERED UNDER WARRANTY!
• When connecting, place the coffee machine on a flat horizontal surface.
When preparing beverages, please do not touch the coffee spout to
avoid burns.
•Please do not allow the power cord, socket and the device itself to come into contact with
water.
Never operate a coffee machine with a defect or a damaged power cord. If
the power cord is damaged, it must be replaced immediately by an
appropriately qualified person in order to avoid a hazard.
• Make sure that the coffee machine and power cord are not near hot surfaces, and that the
cord is not pinched or rubbed against sharp edges.
• Never leave the power cord hanging down, you may trip over it.
• For extended absences, switch off the coffee machine and unplug the power cord from the
socket.
• Always turn off the coffee machine before cleaning.
•This coffee machine is intended for use by staff and users with special skills in
different companies for commercial and representatives.
• maximum inlet water pressure is 5 bar
• minimum inlet water pressure is 1 bar
Controls and display
Model K96L

76
Caution! Non-compliance with the operation, may cause electric shock, and
threat to life.
Caution! Non-compliance with the operation may cause Coffee machine
damage, or personal injury.
Burn hazard! Non-compliance with the operation, may cause scalded or burn
injury.
Caution! This symbol is prompted on important sections. Please carefully read
them.
Precautions
In the event of malfunctions of the coffee machine, first try to solve them
yourself using this user manual (page 66 section "Troubleshooting"). Never
disassemble or repair the coffee machine yourself.
If this proves ineffective, please contact the KAFFIT.com hotline for more information. If
repair is necessary, contact the service center.
You can find the hotline number of KAFFIT.com, as well as the contacts of service
centers on the website www.kaffit.com, or in the warranty certificate.
Any repairs must be carried out exclusively by a service center using original spare parts.
Prohibitions
•Connect the coffee machine only to the voltage network specified on the coffee
machine sticker. Additional technical data can be found on page 66 in the "Technical
parameters" section.
• Do not connect the coffee machine directly to the water supply. Unfiltered water can
damage the coffee machine. This is not covered under warranty!
• Always wipe the coffee machine with a damp, but not wet, cloth.
• Do not allow water to enter the bean hopper.
•
•
•
•Never expose the coffee machine to rain, snow or direct sunlight. Do not allow the
coffee machine to overheat. Make sure that the ventilation openings are not
blocked.
•Always fill the water tank with fresh cold water. If milk, carbonated water or mineral
water enters the water tank, the coffee machine will break down.
Damages due to above reasons are not covered under warranty.
Symbol desctiption
Electrical connection
Do not leave the power cord hanging down. You may trip over it.
Filling the water tank
Instructions for first-time use
Intended use
• Place the coffee machine on a level, stable surface away from sources of
heat and moisture.
•Before connecting, make sure that the mains voltage matches the technical
parameters of the coffee machine (page 68 section "Technical parameters").
•
•Only clean fresh water can be filled into the water tank. Never use any other
liquid (milk, mineral water). This will damage the coffee machine.
• To make guaranteed quality drinks, change the water in the hopper every day.
•The amount of water in the hopper must not exceed the MAX mark.
The coffee machine must only be used to prepare coffee and coffee drinks with milk. We
are not responsible for the consequences of any misuse of the coffee machine. Please
read the contents of the manual carefully.
Please keep this manual for future reference at any time.
Do not use processed coffee (for example: coffee roasted with sugar or flavored oils)
Only roasted coffee bean is allowed to put into the bean container. Chocolate bean, nut,
sugar, spice, etc., are prohibited. Otherwise it would cause coffee machine damage.
Never use coffee machine in the environment temperature below 0 °C. Water inside the
machine will freeze and cause the coffee machine damage.
This symbol, if prompted, represents recycling.
Do not put ground coffee or coffee beans into the oil cleaner compartment. This
will damage the coffee machine.

98
Press the ON/OFF button to activate the appliance.
Display message: "WELCOME". Next, you will be asked
to go through several steps to set up the coffee machine's
operating modes.
Display message: "SELECT LANGUAGE".
The display shows the languages that can be selected. Click
the icon of the desired language, for example "English". To
move to the next item, touch the NEXT STEP icon.
Message on the display: "SELECT THE WATER SUPPLY
MODE". In this menu item, you can choose whether your
coffee machine will take water from the water tank or will be
connected to the tap water supply. Initially, the coffee machine
is set to use water from the tank. Therefore, before connecting
to the tap water supply, perform the first switch-on. To move
to the next item, touch the NEXT STEP icon.
Display message: "SECURITY&PRIVACY".
In this item you can set and activate a password to enter the
SETTINGS menu. Display message: "CHOOSE PIN CODE
SETTING MODE". When activating the MODE WITH
PASSWORD , a window will open
– request for input 6 characters to create a password and a
prompt for password confirmation by re-entering. Press OK to
activate the password mode.
To move to the next item, touch the NEXT STEP icon.
Display message: "INDIVIDUALIZATION". At this point, you
can:
-Select conditions for entering the SETTINGS menu
-Activate cup setting confirmation before cooking
-Enable access to change the recipe during the preparation
process
-Activate the protection mode against accidental ON / OFF.
Filling the coffee bean hopper
•Never put green (unroasted) coffee beans, coffee
flavored with oils or roasted with added sugar into the
hopper.
•Only roasted coffee beans may be placed in the
hopper. Never fill the hopper with rice, soybeans,
chocolate, nuts, sugar and spices.
•Never place foreign objects in order to avoid damage to the coffee grinder.
•Do not pour liquids into the bean hopper.
Grinder adjustment lever for setting the level of grinding
•The level of grinding can be continuously
adjusted depending on the degree of
roasting of the coffee beans used.
•Please adjust the grinding level with the
grinder adjustment lever only when the coffee
grinder is in operation, in order to avoid
damage to the grinder.
•The adjustment of grinding wheel will be
effective only after making two or more cups
of coffee.
•It is recommended to set a coarser grind for
dark roast beans and a finer grind for light
roast beans.
•When the grinding level is set correctly, coffee
is dispensed evenly from the coffee spout.
Power on
1. Connect the power cord to the coffee machine
2. Insert the power plug into the socket.
3. Connect the coffee machine to the mains using the
power switch on the rear panel.
4. Pour water into the water tank and pour beans into the
coffee bean hopper.
Very coarse
Coarse
Medium
Fine
Very fine

1110
Display message: "PRESS AND HOLD SETTINGS TO
ENTER MENU".
Select OPEN to quickly enter the menu, or activate the
CLOSE mode to enter the menu by pressing and holding
the SETTINGS button.
Display message: "CUP CONFIRM".
Select OPEN to enable confirmation mode, or CLOSE to disable it. To go to the next menu
sub-item, use the scroll mode (swipe up from the bottom of the coffee machine display).
Message on the display: "CHANGING THE BEVERAGE RECIPE DURING PREPARATION".
Select OFF to block recipe changes during cooking, or ON to allow changes.
To go to the next menu sub-item, use the scroll mode (swipe up from the bottom of the coffee
machine display).
Display message: “ACTIVATION ON/OFF. HOLD FOR 3 SEC.” To activate the protection
mode against accidental ON / OFF. activate the ENABLE icon. To move to the next step,
touch the NEXT STEP icon .
The message on the display: "AD STANDBY". At this point,
you can:
Select a storage location for videos.
Select the volume of the video playback sound.
Activate downloaded videos.
Download new videos from a USB drive.
Display message: "STORAGE LOCATION".
The current location of the videos is shown by default (device storage). To clear the
storage space and reset all downloaded files, click on the SELECT SETTINGS sub-item
RESTORE DEFAULT VALUES and OK to confirm the selection.
Display message: "VOLUME".
To unmute videos, swipe from left to right. The sound can be adjusted from 0% (off) to
100%.
To go to the next menu sub-item, use the scroll mode (swipe up from the bottom of the
coffee machine display).
Display message: "LOCAL VIDEO AD".
By default, at the factory - manufacturers have activated the playback of the downloaded
promotional video. Its status is ON.
You can disable playback of the downloaded video. To do this, activate the OFF status.
To download your commercial from USB, activate the LOAD FROM U-DISK tab.
Insert a flash card or USB-storage device into the slots to the right of the display and
activate the download. The coffee machine only supports and plays MP4 clips. The
downloaded video will be automatically saved to the machine's memory.
Display message: “COMPLETE. CONGRATULATIONS,
THE COFFEE MACHINE IS SET UP.”
Display message: “SYSTEM PREPARATION IN PROGRESS.
HEATING".
Display message: "HEATING".
Display message: "RINSING".
A small amount of water is drained into the waste water
collection tray. Next, a request appears to rinse the Auto
Cappuccino system.
Display message: "REMOVE MILK PIPE FROM THE MILK
TANK AND INSERT IT INTO THE DRIP TRAY". Connect the
milk tube to the cappuccinatore (through the adapter installed
in the tube), and insert the free end of the tube into the round
hole on the drip tray. Display message: "RINSING". The Auto-
Cappuccino system and the coffee spout are being rinsed.
When the rinsing process is completed, the coffee machine
enters the beverage preparation mode.
Each time you turn on the coffee machine, it automatically warms up, rinses and goes into
standby mode.
During rinsing, a small amount of hot water flows through the coffee spout.
Please avoid contact with hot water.
The coffee machine has been tested at the factory, there may be a small amount of coffee
left in it.
We guarantee you that the coffee machine has never been used.

1312
Please read the following instructions carefully to ensure that your
beverages are of the highest quality.
The beverage supply temperature is very high. Please, be careful!
• Coffee beans should be stored in a dry place out of direct
sunlight.
• Only fill the water tank with fresh cold water.
• For perfect quality beverages, change the water in the
tank daily.
• Please preheat the cup before making coffee for the
best taste.
• Please adjust the height of the coffee spout to the height
of the cup to avoid splashing.
• The coffee spout height adjustment range is 100-165mm.
Press and hold the ON/OFF button to turn off the coffee machine. When you turn off the
coffee machine, a rinsing cycle starts automatically.
•During rinsing, a small amount of hot water is supplied through coffee spout
•Please avoid contact with hot water.
Condition:
If you have prepared beverages with milk, the cappuccino rinsing function will become
available when you turn off the coffee machine.
Press and hold the ON/OFF button for 2 seconds. Message on the display: "REMOVE
THE MILK PIPE FROM THE MILK TANK AND INSERT IT INTO THE TRAY".
•Remove the pipe from the milk carton, disconnect from the thermos container and insert
into the round hole of the drip tray.
Press "OK" to start the flushing process. The Auto-Cappuccino system and the coffee
spout are being rinsed. At the end of the process, the coffee machine turns off.
Making beverages
Making beverages by pressing the touch button-indicator
Please warm up the cup before preparing your drink.
The recommended volume for preparing Espresso is 30-50 ml.
The recommended volume for making Americano is 150-200 ml
You can prepare 20 types of coffee drinks by pressing the corresponding touch icon.
For example, consider the process of making espresso.
To start the espresso preparation process, press the ESPRESSO touch icon.
By using the navigation buttons during grinding you can
select the desired strength. The default setting for strength
is -
Using the navigation icons, at the time of dispensing water,
you can select the desired volume. Espresso is set to 45 ml
by default.
The process of dispensing a beverage can be stopped by
pressing the touch button - the CANCEL indicator.
Once a drink has been prepared, the settings will not be
saved. At the end of the process, the touch icons for
preparing beverages will appear on the display.
To prepare a cappuccino, connect the milk pipe to the
cappuccino maker through the adapter. Dip the free end of
the pipe into the milk carton and press the CAPPUCCINO
touch icon.
Using the navigation icons, at the time of preparation you can
select the desired strength, amount of water and milk foam.
Once a drink has been prepared, the settings will not be
saved.
Making cappuccino
Power off

1514
When the touch icons appear on the screen, your drink is
ready - enjoy!
To prepare a portion of milk, connect the milk pipe to the
cappuccinatore through the adapter. Dip the free end of the
pipe into the milk bag and press the touch icon HOT MILK.
The icon is located on the third page of the display. To go to
the third page, swipe twice on the display from right to left.
Using the navigation icons, at the time of preparation you can
select the desired amount of milk. Once a drink has been
prepared, the settings will not be saved.
At the end of the process, the touch icons for preparing drinks
will appear on the display.
Preparing a serving of hot milk
Press and hold the SETTINGS button for 2 seconds to enter
the programming menu.
The SHORTCUT FUNCTION tab is highlighted. On the right,
the quick menu touch icons are lit.
Permanent settings in programming mode
Entering the programming menu
To enter the programming menu, do the following:
Settings in the programming mode
With the KAFFIT.com coffee machine, you can easily make settings for preparing
coffee beveages according to your individual taste preferences. Using the navigation
buttons, you can view and execute the program steps and store the desired settings in
memory.
With this coffee machine, you can make the following permanent settings.
Programm item Description
SHORTCUT FUNCTION
MACHINE SETTING
In this menu, you can:
- start rinsing the brewer (forced heating of the system
before preparing a small portion of beverages) pg. 17
- start rinsing the Auto-Cappuccino system pg. 18
- view information about all prepared cups of
beverages
- lock the screen for 15 seconds to prevent accidental
icon pressing
- perform a quick exit from the programming menu
This menu will allow you to:
- select settings for preparing coffee and milk drinks.
- block, add or remove a drink.
- activate the "Strength +" function for preparing large
volume coffee beverages and beverages with milk.
pg 23
- Adjust the water hardness. pg 26
- Select the setting mode for rinsing when ON/OFF
(automatically or manually). pg. 28
- Customize the use of equipment with a water filter.
pg. 29
- Select language. pg. 30
- Drain the system for transportation. pg. 30
- Program the automatic ON/OFF time. pg.30
- Switch from water tank operation to tap water supply.
pg. 35

1716
Program item Description
MACHINE SETTINGS
Adjust hot water and coffee dispensing volumes
pg. 36
Restore factory settings by drinks, by coffee
machine pg. 3
MAINTENANCE
In this menu item you can select and start the required
maintenance program pg. 56
STATISTICS
In this item you will be able to view information about all
prepared servings of beverages, about the number of
service programs performed, and also take readings of
the daily counter (shift counter) pg. 40
ADVERTISING SETTINGS
SECURITYPRIVACY
This menu item allows you to set the coffee machines
operating mode with or without a password pg. 48
Programm item Description
INDIVIDUALIZATION In this menu item you can:
- activate instant access to the shortcut function. pg.
49
- activate the prompt for confirming the installation of
the cup.
- enable / disable settings changes during beverage
preparation.
- activate protection against accidental ON/OFF.
pg. 49
ABOUT EUIPEMENT
In this menu item you can select and start the required
maintenance program.
pg. 53
Shortcut function
Shortcut function."RINSING" touch icon
In this menu item, you can force the rinsing of the brewer and the Auto-Cappuccino
system, as well as view information about all drinks prepared during the day and enable
temporary screen lock.
Every day, when switched on and off, the automatic rinsing cycle of the coffee machine
starts.
If more than 30 minutes have elapsed since the last drink was prepared, or if you want to
prepare a drink with a small volume (e.g. ristretto), we recommend that you run a forced
rinsing cycle before preparing it.
The coffee machine is ready to go. Beverage preparation
touch icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are lit.
To start rinsing, click on the RINSING icon.
This menu item will allow you to configure the
playback of advertising:
- In standby
- when you turn on the coffee machine
- during the preparation of drinks
- at the end of the preparation of the drink
pg. 42

1918
Shortcut function. "RINS MILK UNIT" touch icon
Display message: RINSING.
The rinsing process must not be interrupted. A small amount
of hot water is dispensed through the coffee spout.
Be careful!
At the end of the process, the touch icons for preparing
beverages will appear on the display.
At the end of the process, the touch icons for preparing
beveraged will appear on the display.
The coffee machine is ready to go. Beverage preparation
touch icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are lit.
To start rinsing, click on the RINS MILK UNIT icon.
Display message: RINSING.
The rinsing process must not be interrupted. A small amount
of hot water is dispensed through the coffee spout.
Be careful!
Display message: REMOVE THE MILK PIPE FROM THE
MILK TANK AND INSERT IT INTO THE DRIP TRAY.
Remove the milk pipe from the milk bag, disconnect it from
the thermos container and insert it into the round hole in the
drip tray. Click "OK".
Display message: RINSING.
A small amount of hot water is dispensed through the
cappuccinatore. Be careful!
Shortcut function. "STATISTICS" touch icon
The coffee machine is ready to go. Beverage preparation
touch icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are lit.
To quickly view the daily counter, the number of drinks
prepared during the day, click on the STATISTICS icon.
The total number of drinks prepared is displayed in the upper
right corner. For a detailed view of each beverage, swipe up
from the bottom of the display.
To exit the sub-menu, press BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
*NOTE: The daily counter is reset at 00:00 min. If the current time is 08:00 and the coffee
machine time is set to 21:00, then the daily counter will be reset in 3 hours.
Shortcut function."SCREEN LOCK" touch icon
The coffee machine is ready to go. Beverage preparation
touch icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are lit. To
eliminate the possibility of accidentally starting a
beverage, press the SCREEN LOCK icon.

2120
The coffee machine is ready to go. Beverage preparation
touch icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Display message: The screen will be unlocked in 15 seconds.
The countdown starts.
As soon as the countdown shows a value of 0 seconds, the
screen will be unlocked.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Beverage settings
In this menu item, you can make individual preparation settings for any coffee
beverage, create your own, as well as block or delete a beverage.
• We recommend setting a higher temperature for light roast beans or if you are
using 100% Arabica.
• We recommend setting a lower temperature for beverages made from heavily
roasted beans or if the coffee blend has a high Robusta content.
Beverage Strength Settings
ESPRESSO BEVERAGE RECIPE:
-Coffee
-Coffee +Hot water
-Hot water
- Hot milk + Coffee
- Hot milk + Milk cream + Coffee
(at the same time)
- Hot milk + Milk cream + Coffee
(in sequence)
- Hot milk
- Milk cream
Coffee volume: 15-300 ml
Coffee temperature: 15 options
Pre-brew option: YES/NO
Block/Delete
Strength+
AMERICANO
COFFEE
CAPPUCCINO
LATTE MACCHIATO
LATTE
FLAT WHITE
RISTRETTO
MACCHIATO
COFFEE CREM
2 ESPRESSO
2 AMERICANO
2 COFFEE
2 CAPPUCCINO
2 LATTE MACCHIATO
2 LATTE
2 FLAT WHITE
2 RISTRETTO
2 MACCHIATO
2 COFFEE CREAM
COFFEE POT
HOT WATER
Hot water: 25-300 ml
Water temperature: 15 options
Block/Delete
HOT MILK Hot milk (sec.): 5-120 seconds
Block/Delete
MILK CREAM Milk cream (sec.): 5-120 seconds
Block/Delete
Permanent settings in programming mode are always made as shown below.
Example: changing the recipe for preparing an Espresso beverage according to your
taste preferences.
See the table below for details on the setting options.
Machine settings

2322
To enter programming mode, do the following:
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Choose the BEVERAGE SETTINGS tab.
Touch the ESPRESSO icon.
The BEVERAGE SETTINGS window will open.
Press the COFFEE STRENGTH tab.
Choose the needed strength and touch the tab
(LIGHT / MODERATE / RICH).
Press the COFFEE VOLUME tab. to activate it. Fill in the
value you need and confirm your choice by touching the
symbol -
Press the COFFEE TEMPERATURE tab. Check the box next
to the value you need (LOW/MID/HIGH).
By pressing on the field, activate the PRE-BREW OPTION tab
(pre-wetting) and check the box next to the value you need.
Note: For smaller drinks (espresso, ristretto), select YES for a
richer taste and aroma.
You can also block or delete a beverage.
When the beverage is locked, the “LOCK” symbol will appear
next to it, and when you press the touch button of the
beverage, the message will appear: BEVERAGES ARE
LOCKED, PLEASE CONTACT THE OPERATOR.
Press "OK" to save the drink recipe.
To exit the beverage setting, press "BACK".
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Example: creating a new recipe. Activation of the STRENGTH+ function.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.

2524
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Choose the BEVERAGE SETTINGS tab.
Touch the ADD BEVERAGE icon.
By pressing on the + field, activate the BEVERAGE ICON tab.
Choose the photo you need.
By pressing on the field, activate the BEVERAGE NAME tab.
Check the box next to the value you want. If this name of the
beverage is already in the list of recipes, then for a new
beverage you need to fill in the ML field. Enter the value you
need in the field, for example 300 ml. Press
to move to the next field.
Press to confirm the selected volume.
By pressing on the field, activate the RECIPE tab. Select
the formula MILK CREAM + COFFEE.
Press the COFFEE STRENGTH tab.
Choose the needed strenght and touch the tab
(LIGHT / MODERATE / RICH).
Press the COFFEE VOLUME tab to activate it. Fill in the
value you need and confirm your choice by touching the
symbol -
Press on the field to activate the COFFEE TEMPERATURE
tab. Check the box next to the value you need (LOW /
MEDIUM / HIGH).
By pressing on the field, activate the tab CREAM TIME SEC.
Enter the desired value and confirm your choice by pressing
the symbol.
By pressing on the field, activate the PRE-BREW OPTION tab.
(pre-wetting) and check the box next to the value you need.
Note: For smaller drinks (espresso, ristretto), select YES for a
richer taste and aroma.
When programming high volume coffee beverages and beverages
with milk, you can further increase the strength by activating the
PRE-BREW OPTION.
By pressing on the field, activate the PRE-BREW OPTION tab.
Press "OK" to save the settings.
To exit the menu, press "BACK".
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Note: When PRE-BREW OPTION is activated, the Espresso+ icon will appear next to
the beverage icon. During the preparation of the drink, coffee is dispensed two times.
For example, when preparing a cappuccino, a portion of milk cream is dispensed, followed
by an espresso. Next, the coffee waste is dumped and the preparation of the second
portion of espresso begins.

2726
Water settings
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate
it. The MACHINE SETTINGS tab is highlighted.
Press the WATER SUPPLY MODE tab. A
window with tabs will open:
- WATER HARDNESS SETTINGS
- BOOT CLEANING SETTINGS (enabels
automatic rinsing when turning the coffee
machine ON
- FILTER SETTINGS
For the correct operation of the coffee machine and in order to avoid
breakdowns, it is necessary to program the degree of hardness of the water
used.
- 1-4°dh Cleaning prompt will appear after 5000 cups have been prepared (not
covered by warranty)
- 5-9°dh Cleaning prompt will appear after 1000 cups have been prepared
(factory default setting)
- 10-14°dh Cleaning prompt will appear after 800 cups have been prepared
- 15-19°dh Cleaning prompt will appear after 500 cups have been prepared
- 20-24°dh Cleaning prompt will appear after 300 cups have been prepared
- 25-30°dh Cleaning prompt will appear after 100 cups have been prepared
The coffee machine is defaultly set to use very soft water. If you are using
bottled water, you will need to set the range to 10-14°dh. When using tap water,
set 20-24°dh.
Water hardness settings
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the MAINTENANCE MODE tab.
Move the icon from left to right on the hardness scale to the
value you need.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Settings have been saved.
To exit the sub-menu, press BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.

2928
Manual or Automatic rinsing
In this menu item, you can set an automatic or manual rinsing cycle when the
coffee machine is switched on.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the MAINTENANCE MODE tab.
The "AUTOMATIC CLEANING" tab will have two options to
choose from "MANUAL CLEANING" and "AUTOMATIC
CLEANING".
Choose the value you need.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Settings have been saved.
To exit the sub-menu, press BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Using a water filter
In this menu item, you can set the use of the coffee machine with or without a 50L/150L water
filter. By default, the coffee machine comes with a setting without the use of a water filter.
NOTE: The water filter connector is an optional item and is not included in the scope of delivery.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the MAINTENANCE MODE tab.
Scroll down to FILTER SETTING tab.
When activating the mode of operation of the coffee machine
using a filter, the CONFIRM INSTALLING THE FILTER
window will open.
Click "OK" to confirm the installation.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Display message: RINSING.
A small amount of water is drained into the waste water tray.

3130
When the setting is complete, the coffee machine enters
beverage preparation mode.
LANGUAGE SETTING
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Select the LANGUAGE SETTING tab.
The display shows the languages that can be selected. Click
the icon of the desired language. To exit the sub-menu, press
BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Emptying water system (Emptying the System for Transportation)
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Enter the EMPTY WATER SYSTEM tab.
Display message: Remove water tank.
Fulfill the requirement of the coffee machine.
Display message: WATER TANK REMOVED. PLEASE
PRESS CONFIRM BUTTON TO START EMPTY THE
WATERWAY
Press the "OK" button to confirm the start of the process.
Display message: EMPTY WATER SYSTEM
The system is drying up.
A small amount of water is drained into the waste water collection
tray.
At the end of the process, the coffee machine turns off.
Automatic switch ON/OFF.

3332
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Press the AUTOMATIC SWITCH ON/OFF tab.
The AUTO SWITCH ON/OFF TIME SETTINGS window opens.
By default, the auto on and off times are not set.
To set the automatic switch-on time, press SWITCH ON TIME
tab.
The time programming window will open. Select the desired
time in hours and minutes and confirm your choice by
pressing the "OK" button.
Programming ON/OFF time settings
Press the AUTOMATIC SWITCH ON/OFF tab.
A sub-menu with tabs will open:
- Auto switch on/off setting
- Switch off time
- Reset
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
To set the automatic switch-on time, press SWITCH OFF TIME
tab.
The time programming window will open. Select the desired
time in hours and minutes and confirm your choice by
pressing the "OK" button.
Press BACK to exit the time programming menu.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Operating time settings
If the automatic switch-off function is activated, after completing the last operation, the
coffee machine switches off automatically after the specified time has elapsed. In this
model of the coffee machine, you can program the interval (15 min., 30 min., 1 hour - 24
hours interval 1 hour, as well as deactivate the automatic switch-off time).

3534
RESET (to factory settngs)
Press the AUTOMATIC SWITCH ON/OFF tab.
The AUTO SWITCH ON/OFF TIME SETTINGS window
opens. By default, the auto on and off times are not set.
To set the automatic switch-on time, press SWITCH ON
TIME tab.
The default time interval is 4 hours. Select the desired time
interval and confirm your choice by pressing the "OK" button.
Press BACK to exit the time programming menu
To exit the menu, press the EXIT touch icon and confirm
your choice by pressing the OK button.
Selection of water supply mode
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Press the AUTOMATIC SWITCH ON/OFF tab.
Scroll to the RESET tab.
To return to the factory settings of the time, press on the
RESTORE DEFAULT SETTINGS.
The RESET window will open.
Press "OK" to confirm your choice.
Press BACK to exit the time programming menu.
To exit the menu, press the EXIT touch icon and confirm
your choice by pressing the OK button.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.

3736
Press the "WATER SUPPLY MODE" tab. Select the operating
mode you need.
Select the operating mode you need.
Display message: DIRECTIVES ARE BEING SENT,
PLEASE WAIT A MOMENT.
Settings have been saved.
To exit the sub-menu, press BACK.
To exit the menu, press the EXIT touch icon and confirm your
choice by pressing the OK button.
Volume adjustment setting
In this menu item, you can adjust the volumes of water and coffee dispensed in the range
from -20% to +20%, thus correcting possible overfilling and underfilling of beverages.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.
Choose the VOLUME ADJUSTMENT tab.
Set the desired value and press "OK" to save the selected
value.
Display message:SUCCESS.
Press OK to save current settings.
To exit the menu, press the EXIT touch icon and confirm
your choice by pressing the OK button.
Factory reset settings
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
The coffee machine is ready. Beverage preparation touch
icons are lit.
Press and hold the "SETTINGS" button for 2 seconds to
enter the programming menu.
The SHORTCUT FUNCTION tab is highlighted.
On the right, the shortcut function touch icons are
lit.
Select the MACHINE SETTINGS tab and activate it.
The MACHINE SETTINGS tab is highlighted.