KAISHOT IDF-PVR Series User manual
●Please note that the manufacturer does not hold
responsibility for troubles caused by the use of imitation
parts.
●Please read "Safety Instruction" (page 1-3) carefully before
use in order to prevent personal injuries or damages to the
product.
●The content of manual can be changed without any notice.
www.idfone.co.kr
The actual product may look different
from the picture in the User Manual.
KAISHOT
IDF-PV
R
(
Series
)
User Manual Ver1.1
KAISHOT
Safety Instruction 1
Safety Instruction
This instruction is intended to protect user's safety and prevent any damages to the
product. Please read this instruction before use and follow the instruction carefully.
Failure to compl
y
ma
y
cause serious in
j
uries or death
Do not dry this product with electronic heat source such as
radiator, microwave, or stove when it gets wet.
It may lead to explosion, change of shape, or out of order of the
product, and the battery or product changes its color. In this case,
product may not eligible for free services.
Do not use this product in hot and humid conditions out of the
operational range specified. (Recommended operational
temperature: -10℃~ 60℃humidity: 20~85%RH )
When the product is used out of recommended operational environment, it
may lead to explosion or out of order of the product.
Please do not expose the battery under the direct sunlight in a closed area
such as a car. It may explode, change the shape of the product, or become
out of order.
When battery replacement is required, be sure that the parts
replaced are the ones specified by the manufacturer, and not used
for other purposes.
When the battery of different brand is used, durability of the product may be
reduced, or even may possibly lead to explosion. The product will not qualify
for free service under such case. It is strongly recommended to use the
battery referred by the manufacturer.
Keep the product out of children's reach.
It is harmful for the health of children when they play with damaged
battery or put it into the mouth. They may be exposed to harmful
chemical solutions, electromagnetic wave, and/or electric shock.
Do not disassemble, modify, or strike the product.
It may cause the fire.
Warning
KAISHOT
Safety Instruction 2
Press the power cord firmly when you plug it in to the outlet, and
use the cord head when you unplug it in order to prevent damage
to the cord.
When the contact is not tight or a part of the cord is cut, it could lead to fire
and/or heat over-generation.
Please do not break the power cord and do not use them when the power
outlet is loose. When the product is wet and/or your hands are wet, do not
touch the outlet and the power cord.
Do not use liquid or aerosol cleaner or chemical solutions such as
alcohol, benzene, or thinner to clean the product.
It could cause fire and damage to the product. Please use dampened
soft cloth for cleaning the product.
Failure to comply may lead to risk of injuries or loss of assets.
Do not place magnetic materials such as credit card, passbook, or
transit passes near the product. You may lose the information contained
on them. Data stored in the product may be damaged or lost.
When you do not use the product, disconnect the power source from
the product and place on safe surface. The product will be damaged if
the product is stricken, beaten, or shaken hard.
Do not paint the product.
It may damage the screen and be a cause of malfunction. In case the
debris from the paint causes allergic reaction, stop using the product
and see the doctor.
Caution
KAISHOT
Safety Instruction 3
Place the battery in a room temperature when it is not used for long
period of time after charged. When you need to use it again after long
idle period, it is recommended to use it after recharging it fully. Even
after the long idle period, the battery capacity may reduce gradually.
When the duration of operation becomes substantially short, it is
required to replace with a new battery.
Please keep the backup record for your original data.
Data stored in the product may be damaged or lost while upgrading or
repairing the product, or due to human errors.
Please be advised that manufacturer and resellers will not be
responsible for the damage to or loss of data.
Please do not connect this product to the other equipment or application
with a method other than indicated in the User Manual. Some products
may be affected by the electromagnetic wave from this product.
This product is suitable for use in household environment
(Class B). Product can be used in all areas.
-------------------------------------------------------------------------------------
[
Certification
]
KAISHOT
Before you use 4
Before You Use
Cautions Details
Connect all the
peripherals to the unit
prior to the operation.
Connecting or removing the peripherals during the
operation may cause the damages or troubles.
Check the icon status.
If the wireless module, camera, GPS, or Micro SC Card
has to connect to the unit while the power is on, it takes
some time to be recognized. Use the function after
checking the status of the icon. You will see the error
message when the function is not ready to perform yet.
Refer to the
appropriate section of
the User Manual to
change the Micro SD
Card and follow the
instruction.
When it is not handled accordingly, it may damage the
Micro SD Card, or cause critical system errors.
Do NOT open the side
cover.
It may damage Micro SD Card. Also, it may disturb a
normal recording function, thus recording may not be
stored properly.
Do not support
continuous recording.
When you set up Backup Time with ‘0 min’, it should
support continuous recording. But KAISHOT can record
per one hour separately in order to operate system well
Apply LCD Saving
Mode On.
We recommend that you apply LCD Saving Mode On to
reduce the heat generation and battery consumption as
little as possible. It is set as three (3) minutes by default.
Do NOT separate the
battery from the unit
during operation.
If battery is separated from the unit during operation, not
through the proper steps indicated in the User Manual, it
forcefully turns the system off, thus causing troubles in the
system. If battery is separated in the middle of the
recording operation, it may not store the date recorded.
Please check the
battery capacity.
If remaining battery life is not sufficient, it may forcefully
turn the system off.
KAISHOT
Contents 5
Contents
Safety Instruction
Before You Use
Contents
KAISHOT Introduction
KAISHOT Series Introduction
Components
The Name of Each Part
Connecting/Disconnecting Camera
Use of Battery
Micro SD Card Management
Outputting Video to the External Monitor
KAISHOT Preview
Recording Functions
Playback Functions
Transmission (Real-time) Functions
Checking Messages
GPS settings Functions
Setup
Program Upgrade
Troubleshooting
Product Specifications
…………………………………………………………... 01~03
………………………………………………………………….. 04
………………………………………………………………………….. 05
…………………………………………………………….. 06
.......................................................................... 07
……………………………………………………………………… 08
………………………………………………………… 09
……………………………………………. 10
………………………………………………………………. 11~12
.................................................................. 13~14
…………………………………….. 15
……………………………………………………………... 16~19
………………………………………………………... 20~23
…………………………………………………………. 24~31
……………………………………… 32~35
………………………………………………………… 36~40
……………………………………………………. 41~43
…………………………………………………………………………. 44~52
………………………………………………………….. 53~57
……………………………………………………………. 58~59
……………………………………………………. 60~62
KAISHOT
Contents 6
KAISHOT Introduction
KAISHOT is a portable Micro Audio/Video Recorder (mobile Personal Video
Recorder) which is used to record and store video and audio information, provide
locational information, and transmit such information to control tower through
wireless network, thus allowing real-time, on-site monitoring of the field operations.
[KAISHOT Features]
KAISHOT is a digital audio/video portable product for recording and real time
transmission with high resolution (H.264) and smaller size. Its main use is for
security, military, police, sports and other various activities.
KAISHOT is a system that can store, review, and transmit the meta data all at once.
KAISHOT is designed to be protected from water, vibration, or any external shocks.
Accessories such as belt clip, wire, and pin can be used for more convenient
attachment of the product to the user.
KAISHOT
Components 7
KAISHOT Series Introduction
Series Features
IDF-PVR01 Series
*Camera Connector
Connected with Hybrid camera or Bullet
camera
* Hybrid Camera can use Wireless
Communication Module/GPS/Camera
together.
Option Item : Wireless Communication
Module and GPS
IDF-PVR02 Series
Camera Connector
Connected with external equipment such as
Bullet camera and GPS module
Communication Module Connector
Can connect with Wireless Communication
Module
* Option for each
Camera
Connector
Camera
Connector
Communication
Module
Connector
KAISHOT
Components 8
Components
Camera (Optional)
Recorder camera
※Camera(optional): Hybrid or
Bullet Camera(1.5m Turn Core)
User Manual Battery Pack
Micro SD Card CD (Manual/Software) Micro SD Card Reader
AC adapter/Power Cord
(1.5m cable)
AV Cable
(1.5m Turn Core)
USB data transfer Cable
(1.5m Turn Core(optional))
KAISHOT
The Name of Each Part 9
The Name of Each Part
[Kaishot]
[Hybrid Camera]
Camera Connecto
r
2.4” Color
TFT LCD
UP/RIGHT
ENTER
LED
DOWN/LEFT
Internal MIC
POWER
MENU
REC
Belt Cli
p
Speaker
Hand Strap Connector
Batter
y
Lock
DC IN
RESET
A/V OUT
Micro SD Card Slo
t
USB
(
Pro
g
ram U
p
date
)
Cover Lock
Tri
p
od Socke
t
Batter
y
Pack
Wireless Module
(WiFi, HSDPA, GPRS, Wibro)
GPS Module
Camera
Lens Cove
r
KAISHOT
Connecting/Disconnecting Camera 10
Connecting/Disconnecting Camera
Cover Lock Cover Lock
[Connecting]
Line up the arrow as the picture
above and push the cable down.
It will lock automatically and will
secure the connection.
[Disconnecting]
Hold the connector’s lock position and
pull it up to unlock the connection.
Camera will be separated from the
recorder.
KAISHOT
Use of Battery 11
Use of Battery
[Battery Mounting]
[Battery Removal]
Lever Lever
Lever Lever
Align the battery with the power
connector, and load the battery as
shown on the figure.
Push the battery up, and then
slide the Lock to the left to
engage the lock as shown.
Slide the Lock to the right to
release the lock, and pull the
battery down a little as shown.
Lift the battery to separate it from
the body component.
KAISHOT
Use of Battery 12
[Charging the Battery]
[Battery Operation Time]
Small Cap. (2,100mAh) Large Cap. (2,100mAh)
Continuous Recording 1hour 40 minutes 3 hours
Continuous
Transmission
1hour 10-20 minutes 2 hours 30-40 minutes
[Notes on Battery]
▪The figures above are measured in the laboratory setting under the actual conditions.
The actual figures in the use of different conditions may vary.
▪The battery is a consumable. Duration of operation of battery will decrease over time.
▪When the duration of operation of battery is reduced to half from the first time of use,
it is required to replace with a new battery.
(The warranty period of a new battery is six months after its purchase.)
▪The battery is discharged even if you do not use it.
Status LED Color
Recording / Transmission Blue
Receiving Messages Blink Red
Charging Solid Red
Charging Complete Green
Small Cap.
(2,100mAh)
Large Cap.
(4,200mAh)
Time 4~5 hours 7~8 hours
LED Lamp
(LED Lamp Indication)
(Charging Time) - When system is turned off
Connect AC Adapter to the KAISHOT and
insert power cord to the power outlet.
When battery is fully charged, there will
be green light lit on LED indicator.
KAISHOT
Micro SD Card Management 13
Micro SD Card Management
※Caution : You must turn OFF the power before you insert or remove the Micro SD Card, or
the stored information may be damaged or lost. If you have to remove the Micro SD Card when
the power is ON, you should remove the SD Card through the Main Menu. (SEE the following
page for related instruction.)
Slide the side lock to the left
and open the side cover as
shown.
Slide the side lock to the left
and open the slide cover as
shown
[Inserting SD Card] [Removing SD Card]
Push the SD Card into the
slot until you hear click
Slightly push the SD Card in
until it clicks, then the SD
Card will eject out of the slot
Close the cover. Close the cover.
KAISHOT
Micro SD Card Management 14
[Managing the SD Card through Main Menu]
Press the MENU button in the Main Menu for 2-3
seconds.
* You can also remove the SD Card while recording,
transferring, or playing the data through this
method.
* If you want to delete the file separately:
- Refer to "Playback" for deleting recording files
- Refer to "Messages" for deleting messages.
Use "◀◀" or "▶▶" to select the function you want to
perform, then press ENTER.
Press "SD Card Information"
to check the SD Card
information.
Note: You will return to the Main Menu if you press
MENU button again shortly. If you press ENTER once
you finish the final function, it will return to the previous
screen you were running.
Press "Format SD Card"
to format the SD Card.
Press "Remove SD Card"
to remove the SD Card
while power is on.
SD Card must be
completely removed out of
the unit and re-inserted
again to be recognized its
data in the card.
KAISHOT
Outputting Video to the External Monitor 15
Outputting Video to the External Monitor
You can play the files recorded by KAISHOT on TV or other external monitors.
▬▶
Turn off the power supply before connecting the recorder to the external devices.
Open the side cover and connect the supplied AV cable with external monitor's AV cable.
(Caution: It may not work properly if you use a cable from different source.)
KAISHOT
Kaishot Preview 16
KAISHOT Preview
[Main Menu]
[Function Buttons]
- Power ON/OFF
MENU - Press short: move to the previous or next menu
- Press long (2-3 seconds): move back to the Main Menu
REC -Press long (2-3 seconds): start recording
-Also functions to stop recording, real-time transmission, and playback.
ENTER
- Operates selected functions.
- Press short while recording or playback: moves to check messages
(does not stop recording or playback)
- Press long (2-3 seconds) while recording or playback: pauses recording or playback,
or resumes recording or playback.
- Press short while checking messages: moves back to the previous menu
▶▶ - Fast-forward or move to the right
◀◀ - Rewind or move to the left
Refer to page 17
("Description of Icons on Upper-Right Corner of
the Screen")
Transfer
Messages
Setup
Time Setting
(dd-mm-yyyy AM/PM)
REC
Play
GPS
※Please be advised that each function button performs differently in different use.
KAISHOT
Kaishot Preview 17
[Description of Icons on Upper-Right Corner of the Screen]
New message or image file is received
There is no message or image file, or no file is received
Wireless module such as WiFi is connected
Wireless module such as WiFi is NOT connected
Wireless module such as WiFi is turned OFF
GPS is connected
GPS is NOT connected
GPS is not activated (GPS OFF)
SD card is inserted
SD card is NOT inserted
BatteryChargeLevelIndication( )
KAISHOT
Kaishot Preview 18
[KAISHOT Main Function]
Function How to Use
Power
“ ” Press long (2-3 seconds) to turn power ON/OFF
Recording
▪Recording will start when you select REC icon and press ENTER
button.
▪Recording is possible, except when data is being transmitted real-time,
by pressing REC button for 2-3 seconds.
▪Recording will end when you press REC button while recording.
▪Always check the camera connection, Micro SD Card memory status,
and remaining battery life before recording.
Playback
▪You can see the list of recorded files by selecting Play icon. Select the
file you want to play then press ENTER button.
▪Playback will end when you press REC for 2-3 seconds while playing.
Transmission
▪Real-time transmission will start when you select Transfer icon and
press ENTER button.
▪You can record when “Select REC” is “REC on”.
▪Transmission will end when you press REC button.
▪Check the connection of camera/wireless module/ remaining battery life.
▪Data is NOT being recorded when file is being transmitted.
▪You can watch real-time video through KAISHOT Viewer
Messages
▪You can check the list of received messages in the Main Menu by
pressing Message icon, and select the message you want to check
then press ENTER button.
▪You can check the message while recording, playback, or transmission
if you press ENTER button.
▪Wireless module has to be connected to check the messages.
▪You can send messages through KAISHOT Viewer.
KAISHOT
Kaishot Preview 19
Functions How to Use
GPS
▪Select GPS icon and press ENTER button to change your GPS settings.
▪Check GPS module.
▪GPS information is used to set up time, store GPS data while recording,
and transmit GPS information while real-time transmission.
Setup
▪Select Setup in the Main Menu and press ENTER button to change or
set up the property value.
▪Record Mode
You can check and change the value about Recording Functions.
▪Transmission Mode
You can check and change the value about Real-time video
transmission and WiFi that are related to wireless module.
You can check and change REC set up mode during transmission and
set up value for REC during transmission.
▪GPS Setup
You can check and view about GPS Functions.
▪Tools Setup
You can check and change various setup values such as LCD Saving
Mode / Languages / LCD Brightness.
* When system is in Lock mode, the only button that can be used is to Unlock the system.
Table of contents
