Kalley K-LED55FHDXST2 User manual

KALLEY
SK-LED55FHDXST2
Ă
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
ˊ
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
ˊ
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
6
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
7. Explode drawing................................................................................................

CA UTION: TO RE DUCE THE RIS K OF
ELECTR ICA L SHOCK, DO NOT RE MOVE
COVER (OR BACK). NO USER SERVIC EABLE
PAR TS INS IDE . RE FER SER VIC ING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CA U T ION
RISK
RISK OF
ELECTRI
ELECTRIC
SHOCK
SHOCK DO
NOT
NOT
OPEN.
OPEN.
2
dangerous
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SCHNEIDER ELECTRONICS GMBH-GERMANY
1. CAUTION

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Sa ve these instructions for later use . Follo w all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the productand in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
3
SCHNEIDER ELECTRONICS GMBH-GERMANY
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR PERSONAL SAFETY
3

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supportingstructure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
4
SCHNEIDER ELECTRONICS GMBH-GERMANY
PROTECTION AND LOCATION OF YOUR SET
PROTECTION AND LOCATION OF YOUR SET
4

18.
This television set should be operated only from the type of power source indicated on the marking label.If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
21. If you are unable to restorenormal operation by followingthe detailedprocedurein your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
24. Do not use attachments not recommendedby the television set manufacturer as they may cause hazards.
25. When replacementparts are required,be sure the service technicianhas used replacementparts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any service or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
off
5
SCHNEIDER ELECTRONICS GMBH-GERMANY
OPERATION OF YOUR SET
IF THE SET DOES NOT OPERATE PROPERLY
FOR SERVICE AND MODIFICATION
5

PRODUCT SPECIFICATION RELEASE
Product Type LCD Smart TV Music support MP3/AC3/HE-AAC/LPCM/WMA
Chassis MS08G Picture Support JPEGǃBMPǃPNGǃMPO
CPU 1GHZ Support H.264ǃMPEG1ǃMPEG2ǃGPU --- Motion JPEG/VC1
OS Linux
Model:K-LED55FHDXST2
Version˖1.0 Issued On: 2015-6-17
Video
Basic Information Media Code
Memory Bein 2Gb DDR3 +External 1Gb DDR3/ 2Gb
NandFlash File ---
OSD Language English/Spanish
PAL-M/N ;NTSC-M
DVB-T2
AV System PAL,NTSC DVI Video Format Up to XGA for HDMI-PC
Channels(Analog) Antenna˖269˗CATV˖1125 HDMI Video Format up to 1080P
DTV Channels DVB-T2 Antenna˖1469 PC Compatibility Up to SXGA
Power Supply AC 110V-240V 50/60Hz
Signal Format Capability
Panel Specification
TV System
Power Consumption˄TV On˅110W
Power Consumption˄Standby˅İ0.5W Backlight Unit LED
Certification CB Panel supplier INX:V500HJ1-PE8
Energy Efficiency Level --- Aspect Ratio 16:9
Wired Network Default Panel Size (inch) 54.6"
Built-in Wi-Fi Network Display Resolution 1920*1080
Brightness (cd/m2)(typ.) 280
Contrast Ratio 4000:1
Response Time (G to G) 8ms
EPG
Yes(at DTV)
Viewing Angle (H/V)
178
°
/178
°
Internet Link
Panel Specification
Basic Function
EPG
Y
es
(
a
t DTV)
Vi
ew
i
ng
A
ng
l
e
(H/V)
178°/178°
Subtitle Yes(at DTV) Life Time(Typ.) ˚30,000hrs
Parental Control Yes(at DTV) Color 16.7M (8 bit)
Lock Yes Refresh Rate 60Hz
V-Chip ---
CCD (Closed Caption) Yes
Sleep Timer Yes
Teletext No
Nicam No Side
MTS Yes
Terminals
Screen Saver Yes
System Update Yes
Hotel Mode Optional(In factory mode)
REC Yes
Analog / Digital Signal Receiver Yes
MHL ---
Card Reader ---
TimeShift Yes
Special Function
TimeShift
Yes
Off Timers Yes
Natura Light Technology ---
DCC˄Dynamic Contrast Control˅ON/OFF
Backlight Adjustable Yes (0~100)
Color Temperature Warm / Normal/ Cool
Picture Mode Normal, Mid, Vivid, User
Picture Size Auto,16:9,4:3,Just Scan
Picture
Picture Size
Auto,16:9,4:3,Just Scan
Gamma Adjustable ---
Comb Filter 3D
Dynamic Noise Reduction 3D
Adaptive Deinterlacing 3D
Motion Compensation Yes
Speakers Integrated speakers (Bottom Side)
Audio Power Output˄THD=7%˅2×8W
Smart Volume Yes
(
Built-in
)
Sound
4
Smart Volume
Yes(Built in)
Smart Audio Normal,Music,Movie,News,User
Sound Control Volume, Balance,5 Band EQ
Sound Scene ---
Surround Sound Yes
DD (Dolby Digital ) Yes
Dobly DD+ Yes Down

Twitter Social Network NETFLIX
Facebook
Social Network
Pre-Installed Application List Special Function
With Netflix ,You can instantly stream
thousands of your favorite TV shows and
Facebook Social Network
Web Browser
Opera Browser
YouTube V4 YouTube Leanback
File Share Powered by DLNA or Wi-Fi Network
Wireless Display Wireless Display
picasa Online Album open API
Opera TV Store compact TV App Store
NETFLIX Watch TV and Movies Online App Store
File Share By connecting the TV and a device
(computer, smart, phone, pad, etc.)
th
ousan
d
s o
f
your
f
avor
it
e
TV
s
h
ows an
d
movies right to your TV set
Wireless display technology can realize the
notebook with the TV set, projector display
terminal wireless connection, not a machine
connecting line.Put the notebook display
content, such as video, games, pictures, play
wireless transmission to the TV
(computer, smart, phone, pad, etc.)
to the same local network, you can enjoy
the music, videos and pictures shared
by the device on the TV.
Mechanical ID Picture
Unit:mm
16MM
16MM
16MM
80.3MM
19MM
1131MM
707MM
655.5MM
Mechanical Key Specification
Remote ID Picture
205MM
858MM
Mechanical Key Specification
Carton Dimensions LxWxH˄mm˅1325*154*803
Container Loading---20 feet˄pcs˅126
Container Loading---40 feet˄pcs˅270
Container Loading--40 feet High˄pcs˅405
Net Weight With Stand ˄Kg˅11.8
Net Weight Without Stand ˄Kg˅11.5
Gross Weight With Packaging˄Kg˅15.1
R
emo
t
e
ID Pi
c
t
ure
Gross Weight With Packaging
˄
Kg
˅
15.1
VESA Mounting Dimensions LxH˄mm˅200*200
Operation Manual English(Default) Wall Mount WMB331
Remote Control and batteries RC199E Wireless Keyboard ---
Optional Accessories
Essential Accessories
˄
Default
˅

Base Stand Integrated Packaging Wireless Mouse ---
AC power cord 1 pc Game Controller ---
Drafted by: fanyaofei Approved by:
Design and specifications are subject to change without notice!

1/13
Alignment Procedure
06*36HULHV
VERSION˖V1.0
PREPARED BY : Gongjunzan DATE : 2015-3-23
APPROVED BY : DATE:

2/13
History
Description of major changes
Release
Date
Changed by
V1.0
2015
-3-
23
2YHUYLHZ
06*3These chassis are designed for Eastern Europe markets Ready for IPTV. The main
chip is from Mstar and supports below features matrix:
)DFWRU\0HQXǃ0HWKRGVRI(QWHULQJ
0HWKRG˖8VLQJWKHUHPRWHSelect “Picture”and press “OK”key to enter into Picture Mode press RIGHT”or
“LEFT” key Select User Mode
- Press the subsequence RCU keys “9”, “7”, “3” and “5”ˈZLOODSSHDULQWKHOHIWWRSRIVFUHHQIn case of “Factory hotKey” is enabled˄On˅,just press RCU “Return” key to pop-up
again the Factory menu.
The status of “Factory Key”can be changed in Factory Menu->Hotkey.
Press RCU “OK”key or “RIGHT” key to enter the submenu.
Press RCU “Menu”key to go back to the root menu.
Press RCU “RIGHT”or “LEFT” key to change the values.
Press RCU “OK”key run the function.
Press RCU “Exit”key exit the Factory menu.
*HQHUDOLQWURGXFWLRQ
)$&725<0(18

3/13
,7(06'HIDXOW6HWWLQJ'HVFULSWLRQ6WDWXV
)DFWRU\KRWNH\
2II)DFWRU\KRWNH\6
ZLWFK2))216KRXOGEH2))
DIWHUIDFWRU\DOLJQPHQW2.
:$50832II2))˖
7KHVHWZRXOGHQWHUVWDQGE\PRGHDIWHU
PLQXWHVZLWKRXWLQSXWVLJQDO˗21˖
$JLQJPRGH$JLQJWLPHZLOOGLVSOD\RQ
WKHOHIWERWWRPRIVFUHHQ
NOTE:
Enter and exit
the aging mode method: 1,
press on the remote control Left and right the cursor
keys will F
actory hotkey
set to ON; 2, WARM UP is set
to ON; according to the panel on the "menu" button to
exit the aging mode
2.
$'&$'&FDOLEUDWLRQ˄UHIHUDVIROORZ˅ˈ
127(1RW
DGMXVW2.
:KLWHEDODQFH:KLWH%DODQFHGDWDDGMXVWPHQW˄
UHIHUDV
IROORZ˅7KHEDODQFH
GDWDLVVHWE\3(EHIRUHWKHPDVV
SURGXFWLRQ'RQRWQHHGDGMXVW2.
6+23LQLW2SWLRQ'2
5HVHWWKHVHWDIWHUSURGXFWLRQDOLJQPHQW7KLVRSHUDWLRQZLOOUHPRYHDOOXQQHFHVVDU\IDFWRU\YDOXH7KHIDFWRU\
KRWNH\ZLOOEHWXUQRII2.
190UHVHW'26\VWH
PLQLWLDOL]DWLRQ5HVWRUHDOOGDWDH[FHSWWKH:KLWH%DODQFHDQG$'&GDWD2QO\
IRU5'2.
3UHVHW)DFWRU\
&KDQQHO'2+=
3UHVHWVSHFLILFIDFWRU\FKDQQHOVIRU
VSHFLILF
IDFWRU\3UHVVOHIWDQGULJKWEXWWRQWRVHOHFWWKHIDFWRU\DQGWKHQSUHVV
2.WRFRQILUP2.
3RZHURQPRGH/$672Q$OZD\VWXUQVRQ79ZKHQ$&SRZHURQ67%˖
$OZD\VJRHVWRVWDQGE\PRGHZKHQ$&SRZHU
RQ/$67˖
5HVWRUHWKHVWDWXVEHIRUHWKHODVW$&
SRZHURII
2.

4/13
86%83'$7(RSWLRQ
86%XSGDWHˈ˄˄UHIHUDVIROORZ˅
Sub-item
Value
Not
Main Upgrade
Upgrade software
MEMC Upgrade
U
pgrade MEMC
HDCP Uprade
U
pgrade HDCP
Mboot upgrade
U
pgrade Mboot
CI KEY Upgrate
U
pgrade CI KEY
NVM Upgrade
U
pgrade NVM
NVM backup
B
ackup NVM
CH list Upgrade
U
pgrade CH list
CH list backup
B
ackup CH list
NetflixESN Upgrade
U
pgrade ESN
MAC Upgrade
U
pgrade MAC Add
2.
ü
'HYLFHOGWHVW
7KLVLWHPRQO\IDFWRU\XVHGˈ1RWH%HORZWKHIDFWRU\PHQXVRPHPRGHOLQIRUPDWLRQDUHVKRZHGLQFOXGLQJVRIWZDUHYHUVLRQ3URMHFW1DPH6,$&39HUVLRQDQG6:UHOHDVHWLPH
˅$'&6XEPHQX127($'&'DWHXVH
'HIDXOW6HWWLQJGRZLWKRXWDGMXVW
˅:+,7(%$/$1&(6XEPHQX
,7(06
'HIDXOW
6HWWLQJ
'HVFULSWLRQ6WDWXV6RXUFH
&XUUHQW
6RXUFH&XUUHQW6RXUFH+'0,QHHGDGMXVWPHQW
2WKHU
6RXUFHQRWXVH2.
&2/257(03
1250$/0HGLXP&RRO:DUH2.5JDLQ5*$,12.*JDLQ**$,12.%JDLQ%*$,12.:KLWH%DODQFHLQLW'221/<)257&/5'2.127(˖7KHILUVWVWHSLVWRDGMXVW+'0,
'HVLJQ0HQX

5/13
ǃ0HWKRGVRI(QWHULQJ
˖0HWKRG˖8VLQJWKHUHPRWHHQWHUWKHĀ3LFWXUHāVXEPHQXLQWKH26'FKRRVLQJWKHĀFRQWUDVWāLWHPDQGSUHVVWKHDQGLQVHULHV'HVLJQ0HQXZLOODSSHDULQWKHOHIWWRSRIVFUHHQ0HWKRG3UHVV5(7851EXWWRQZKHQ'(6,*1+27.(<LVHQDEOHG21
ǃ*HQHUDOLQWURGXFWLRQ'(6,*10(18
,7(06
'HIDXOW6HWWLQJ
'HVFULSWLRQ6WDWXV
'(6,*1+27.(<2))212))2.)$&725<0(18212))2.6+236HWWLQJ'HIDXOWVHWWLQJVXEPHQXDIWHU
SURGXFWLRQ
DOLJQPHQWUHIHUWR2.2WKHU6HWWLQJ2WKHUVHW2QO\IRU7&/5'2.6(59,&(PHQX$IWHUVHUYLFHPHQXGHVFULSWLRQ2.3$5$06(77,1*3DUDPHWHUVHWWLQJVXEPHQX2.
+27(/0(18
+RWHOVXEPHQX˄QRWDGMXVW˅2.
6+23,1,7VXEPHQX
,7(06'HIDXOW6HWWLQJ'HVFULSWLRQ
6WDWXV
9ROXPHDGMXVWDEOH2.3,&02'(67$1'$5'
1RUPDO9LYLG0LOG8VHU2.6281'02'(
67(5(20RYLHQHZV1RUPDO0XVLF8VHU2.26'/DQJXDJH(QJOLVK8SWRODQJXDJHVRSWLRQDO2.3UHVHW&+DGMXVWDEOH2.&RORU7HPS
1RUPDO1RUPDOZDUPFRRO

6/13
6DOH0RGH+RPH0RGH&2/256<6$872$872ǃ3$/ǃ6(&$02.6281'6<6'.'.ǃ%*ǃ,ǃ02.2
2WKHU6HWWLQJ
,7(06'HIDXOW6HWWLQJ'HVFULSWLRQ
6WDWXV
40$3$8-867
2II
::KLWH5HG*UHHQ%OXH%ODFN<HOORZ*UD\3LQN˄QRW
DGMXVW˅2.
1905HVHW
$//'R:DLW˄QRWDGMXVW˅2.
*RW8VHU,'
2II
2Q2II
˄QRWDGMXVW˅2.8V
H7HVW
+RVW2II2Q2II˄QRWDGMXVW˅2.+LGHY2II2II??˄QRWDGMXVW˅2.
66&20'HEXJ
RQ2Q2II˄QRWDGMXVW˅2.'792II2Q2II˄QRWDGMXVW˅2.5HVHW6KRS
'R:DLW˄QRWDGMXVW˅2.%*02Q2Q2II˄QRWDGMXVW˅2.:66$7)2Q2Q2II˄QRWDGMXVW˅3$5$06
6(77,1*3LFWXUH&XUYH
,7(06'HIDXOW6HWWLQJ'HVFULSWLRQ
6WDWXV
%ULJKWQHVV
&XUYH
%ULJKWQHVVFXUYH([FOXVLYHO\XVHGE\5'
2.
&RQWUDVW
&XUYH
&RQWUDVWFXUYH([FOXVLYHO\XVHGE\5'
2.
&RORU&XUYH
&RORUFXUYH([FOXVLYHO\XVHGE\5'
2.
+XH&XUYH
+XHFXUYH([FOXVLYHO\XVHGE\5'
2.
6KDUSQHVV
&XUYH
6KDUSQHVVFXUYH([FOXVLYHO\XVHGE\5'
2.

7/13
7LQW&XUYH
7LQW&XUYH([FOXVLYHO\XVHGE\5'
%DFN/LJKW
&XUYH
%DFN/LJKWFXUYH([FOXVLYHO\XVHGE\5'
2.
2YHU6FDQ
([FOXVLYHO\XVHGE\5'
6
6RXQG&XUYH
9ROXPH
&XUYH
9ROXPHFXUYH([FOXVLYHO\XVHGE\5'
2.
66&DGMXVW
66&!!!
66&DGMXVW([FOXVLYHO\XVHGE\5'
2YHUVFDQ$GMXVW
2YHU6FDQ
2YHU6FDQ([FOXVLYHO\XVHGE\5'
'%&
'%&
'%&([FOXVLYHO\XVHGE\5'
%DFN/LJKW&XUFH
%DFN&XUYH
%DFNFXUYH([FOXVLYHO\XVHGE\5'
2.
$XGLRDPS6HWWLQJ$XGLRDPS
6HWWLQJ
$XGLRDPS6HWWLQJ
([FOXVLYHO\XVHGE\5'2.
'793DUD6HWWLQJ
'793DUD66HWWLQJ
'793DUD6HWWLQJ
([FOXVLYHO\XVHGE\5'2.

8/13
+
+RWHOPHQXǃ6HUYLFH0HQXǃ0HWKRGVRI(QWHULQJ
8VLQJWKHUHPRWHHQWHUWKHĀ3LFWXUHāVXEPHQXLQWKH26'FKRRVLQJWKHĀFRQWUDVWāLWHPDQGSUHVVWKHDQGLQVHULHV6HUYLFH0HQXZLOODSSHDULQWKHOHIWWRSRIVFUHHQ6(59,&(0(18˖,7(0
'HIDX
OW
6HWWL
QJ'HVFULSWLRQ
6WDWXV
)DFWRU\KRWNH\
2II
)DFWRU\KRWNH\6ZLWFK2))216KRXOGEH2))
DIWHUIDFWRU\DOLJQPHQW2.:$50832II2))˖
7KHVHWZRXOGHQWHUVWDQGE\PRGHDIWHU
PLQXWHVZLWKRXWLQSXWVLJQDO˗21˖
$JLQJPRGH$JLQJWLPHZLOOGLVSOD\RQWKH
OHIWERWWRPRIVFUHHQ
NOTE:
Enter and exit
the aging mode method: 1, press
on the remote control Left and right the cursor keys will
F
actory hotkey
set to ON; 2, WARM UP is set to ON;
according to the panel on the "menu" button to exit the
aging mode
2.$'&$'&FDOLEUDWLRQ˄UHIHUDVIROORZ˅ˈ
127(1RW
DGMXVW2.:KLWHEDODQFH:KLWH%DODQFHGDWDDGMXVWPHQW˄UHIHUDVIROORZ
˅7KHEDODQFHGDWDLVVHWE\3(EHIRUHWKHPDVV
SURGXFWLRQ'RQRWQHHGDGMXVW2.6+23LQLW2SWLRQ'2
5HVHWWKHVHWDIWHUSURGXFWLRQDOLJQPHQW7KLVRSHUDWLRQZLOOUHPRYHDOOXQQHFHVVDU\IDFWRU\
YDOXH7KHIDFWRU\KRWNH\ZLOOEHWXUQRII
2.190UHVHW'2
6\VWHPLQLWLDOL]DWLRQ5HVWRUHDOOGDWDH[FHSWWKH:KLWH%DODQFHDQG$'&GDWD2QO\IRU5'
2.
3UHVHW)DFWRU\
&KDQQHO
'2+=
3UHVHWVSHFLILFIDFWRU\FKDQQHOVIRU
VSHFLILFIDFWRU\3UHVVOHIWDQGULJKWEXWWRQWRVHOHFW
WKHIDFWRU\DQGWKHQSUHVV2.WRFRQILUP1*

9/13
3RZHURQPRGH/$67
2Q$OZD\VWXUQVRQ79ZKHQ$&SRZHURQ67%˖
$OZD\VJRHVWRVWDQGE\PRGHZKHQ$&SRZHU
RQ/$67˖
5HVWRUHWKHVWDWXVEHIRUHWKHODVW$&
SRZHURII
2.86%83'$7(RSWLRQ
86%XSGDWHˈ˄˄UHIHUDVIROORZ˅
Sub-item
Value
Note
Main Upgrade
Upgrade software
MEMC Upgrade
U
pgrade MEMC
HDCP Uprade
U
pgrade HDCP
Mboot upgrade
U
pgrade Mboot
CI KEY Upgrate
U
pgrade CI KEY
NVM Upgrade
U
pgrade NVM
NVM backup
B
ackup NVM
CH list Upgrade
U
pgrade CH list
CH list backup
B
ackup CH list
NetflixESN Upgrade
U
pgrade ESN
MAC Upgrade
U
pgrade MAC Addre
ü
'HYLFHOGWHVW
7KLVLWHPRQO\IDFWRU\XVHGˈRN
'HEXJJLQJ*HQHUDO6WHSVRIGHEXJJLQJ
$FFRUGLQJWRWKHUHTXLUHPHQWRIWKHRUGHUEHORZVWHSVDUHQHHGHGIRUDSSURSULDWHVHWWLQJ(QWHUWKH)DFWRU\0HQXHQDEOH)$&+27.(<&KHFN3URMHFW,'DQGWKHYHUVLRQRIVRIWZDUHUHOHDVHGDWHGLVSOD\HGDWWKHERWWRPRI)DFWRU\0HQX(QWHU'HVLJQ0HQXFKRRVH6(59,&(0(18!3URMHFW,'FKRRVHFRUUHVSRQGLQJ3URMHFW,'QXPEHURIWKHSURGXFW5HIHUWRWKHĀ9352-(&7,'āLQWKH%20OLVW5HWXUQWR)DFWRU\0HQXFKHFNWKH3URGXFWPRGHO&KRRVH)DFWRU\0HQX!1905(6(7DQGSUHVVWKHULJKWEXWWRQRIWKHUHPRWHDQGZDLWXQWLOSURPSW2.DSSHDUV5HVWDUWWKHVHW$FFRUGLQJWRWKHUHTXLUHPHQWRIWKHRUGHU6HWWKHLWHPVRI6+23,1,7DQG+RWHO0HQXHWF

10 /13
$IWHUDJLQJXQGHUQRUPDOWHPSHUDWXUHFDOLEUDWH$'&DQGDGMXVWZKLWHEDODQFH&KRRVH)DFWRU\0HQX!6+23DQGSUHVVWKHEXWWRQRIUHPRWHWRLQLWLDOL]HWKHVHW1RWH$IWHUVWHS+RWHO0HQXZLOOEHGLVDEOHGE\GHIDXOW7KHUHIRUHLIWKHRUGHUUHTXLUHVKRWHOIXQFWLRQLWLVQHFHVVDU\WRHQDEOHKRWHOIXQFWLRQE\VHW'HVLJQ0(18!6HUYLFH0HQX!+27(/(1$%/(WR21
(TXLSPHQWV
g&RORU$QDO\]HU&$g9LGHR3DWWHUQ*HQHUDWRU&KURPDg&RORU793DWWHUQ*HQHUDWRU30)OXNHg9*$FDEOH$95&$FDEOH+'0,FDEOHHWF
$'&)XQFWLRQQRW&DOLEUDWLRQ:KLWH%DODQFHDGMXVWPHQWV0DQXDO
%HIRUHDGMXVWPHQW\RXPXVWPDNHVXUHWKH$'&VWDWXVRQO\3&DQG<3E3ULVĀVXFFHVVāDQG&RORU$QDO\]HUKDVEHHQFDOLEUDWHG2QO\$9<3E3U3&+'0,QHHGWREHDGMXVWHG+'0,VKRXOGEHWKHILUVW
6LJQDODQGJHQHUDWRU
7KHSDWWHUQRIWKHVLJQDOVKRXOGEHXVHGDUH:KLWH&KURPDSDWWHUQDQG*UH\SDWWHUQ7KHIRUPDWRIVLJQDODUHUHVSHFWLYHO\3IRU+'0,&KURPD7LPLQJ3$/&KURPD7LPLQJIRU$9;#+]&KURPD7LPLQJIRU9*$DŽ
6WHSVRIDGMXVWPHQW
(QWHUWKHIDFWRU\PHQX!:KLWH%DODQFHVHOHFWVRXUFH+'0,DQG1RUPDO7HPSHUDWXUH,QSXWJUH\VLJQDOLQSIRUPDW&KDQJH52))6(7DQG%2))6(7WRPDNHVXUHWKHYDOXHRIFRORUFRRUGLQDWLRQHTXDOWR; < ,QSXWZKLWHVLJQDOLQSIRUPDW&KDQJH5*$,1DQG%*$,1WRPDNHVXUHWKHYDOXHRIFRORUFRRUGLQDWLRQHTXDOWR; <

11 /13
5HSHDWVWHSüXQWLOERWKRIWKHYDOXHRIFRORUFRRUGLQDWLRQRIZKLWHDQGJUH\HTXDOWR; < $IWHUWKHDGMXVWPHQWRI+'0,\RXFDQVZLWFKWRRWKHUVRXUFH$93&DQG<3E3UDQGUHSHDWVWHSüWRGRWKH:%DGMXVWPHQW
1
1RWH
)RUVRPHVPDOOVL]H/('SDQHOWKHFRORUFRRUGLQDWLRQRIVSHFLILFDWLRQVLVQRW; < DQGZHUHFRPPHQG\RXDGRSWWKHYDOXHVIURPSDQHOVSHFLILFDWLRQV
$'&&DOLEUDWLRQDQG:KLWH%DODQFH$GMXVWPHQWDXWRPDWLF
7KHSURFHVVRIDGMXVWLQJ:KLWH%DODQFHDXWRPDWLFDOO\LVRXWRIWKHUDQJHRIWKLVILOH3OHDVHUHIHUWRWKHUHOHYDQWWHFKQLFDOILOHRI+XL=KRXIDFWRU\RI7&/
&KLSOLVWRIVRIWZDUHSURJUDPPLQJEHIRUH607
)ROORZLQJFKLSVPXVWEHSURJUDPPHGEHIRUH607E\WRROV
3RVLWLRQ
&KLSW\SH
6RIWZDUHGHVFULSWLRQ
8
MT
29F2G08AB
AEA
+'0,+'&3.H\6\VWHP6RIWZDUHHWF
6RIWZDUHXSGDWH
0HWKRGRI6:XSGDWH
˅
'RZQORDGWKHELQILOHWRWKHURRWGLUHFWRU\RI\RXU86%GHYLFH'RQRWFKDQJHWKHILOHQDPH7KHQLQVHUWWKH86%GHYLFHWR86%LQWHUIDFHRI79VHW06*36HULHVZLWKLWVXSJUDGHILOHFRUUHVSRQGLQJUHODWLRQDVWKHWDEOHEHORZVKRZ&KDVVLV1DPH6DOHVDUHD8SJUDGHILOHQDPH
5HPDUN06*3/$06*3B0$,1ELQ'9%72
ε
Appendix n“How to upgrade SW FLASH using Mstar tool”
See Appendix
o
“How to upgrade MBOOT using USB”
Appendix
p
“How to upgrade FLASH SW using USB”
¾Copy the SW BIN image “MS08GP_MBOOT.bin” into USB stick root path.
Note: If there’s already other “MS08GP_MBOOT.bin” into USB root, it needs to be deleted
or renamed.
¾Plug USB stick to the TV USB slot.
¾Press RCU MENU
Æ
Option
Æ
Software upgrade
Æ
By USB
Æ
Confirm.
Or, turn off the TV press and hold the power key of key board before reconnect AC

12 /13
cord to restart TV for 5-8seconds (Forced Upgrade).
¾When the "UPGRADING SOFTWARE" picture appears as below, it means TV is
uploading SW BIN image. Waiting a few minutes.
¾When updating is successful, TV should restart automatically.
There are two methods to upgrade SW using USB, the first one like below˖In the previous of upgrade SW using USB, should program mboot bin file”
MS08GP_MBOOT.bin” by ISP_Tool or by USB. .¾Then switch off TV by removing AC cord.
¾Copy the SW BIN image “MS08GP_MAIN.bin”for MS08GP into USB stick (pen
drive) root path
Note: If there’s already other “The same name
”into USB root, it needs to be deleted or renamed
¾Plug USB stick to the TV
¾Press and hold the power key of key board before reconnect AC cord to restart
TV for 5-8seconds.
¾Once USB stick starts blinking, TV is uploading SW BIN image.
¾When update is successful, TV should restart automatically.
¾Remember to perform “Factory menuÆ
Æ
NVM reset“ and then press RCU “OK”
key
¾Switch off TV by removing AC cord
¾Reconnect AC cord to restart TV and wait few seconds for Eeprom update
The second method
˖
¾To use this method, there should be SW in mainboard to ensure TV can display
normally.
¾Copy the SW BIN image “MS08GP_MAIN.bin”and into USB stick (pen drive)
root path
¾Press RCU MENU
Æ
Option
Æ
Software upgrade
Æ
By USB
Æ
Confirm
¾TV display warning information, that means it is upgrading, almost 3minutes later,
when upgrade successful, TV should restart automatically.
Appendix q“How to change ProjectID with RCU”
Table of contents
Other Kalley LCD TV manuals