Kamada power KMD-PJ24100 User manual
Shenzhen Kamada Electronic Co., Ltd
Web: www.kmdpower.com
E-mail: [email protected]
Address: Building 4, Mashaxuda High-tech lndustry Park, Pingdi Street,
Longgang District518117,Shenzhen, Guangdong, P.R.China.
Fax: +86-755-23229135 Tel:+86-755-2833 2245
01
RS485 CAN RS232 PARALLEL-RS485
MENU
ENTER
DOWN
DRY
4321
SOC
ESC
RUN ALM
02 03
Iron phosphate-lithium power battery
Long warranty period:5 years
ON/OFF
RST ADD
04 05
·
·Do not mount the battery on flammable construction materials.
·The ambient temperature should be between 0°C and 45°C to ensure optimal operation.
·The recommended installation position is to be adhered to the wall vertically.
·
2.4 Mounting the Unit
Consider the following points before selecting where to install:
Be sure to keep other objects and surfaces as shown in the right diagram to guarantee sufficient heat dissipation andto
have enough space for removing wires.
Refer to the attached figure for installation hole positions and screw hole sizes of wall mounting supports.
06 07
3. INSTALLATION
3.1 Diagram of accessories
3.3 Installation steps
3.2 Description of accessories
08 09
4. OPERATION
4.1 Function introduction
4.2 Communication introduction
10 11
4.3 Interface definition
Communication Interface Diagram
4.4 Switch ON / OFF
12
4.5 ON / OFF or SOC Led (Mode or SOC)
13
14 15
4.6 Connection for Parallel Mode
1. The ADD address of this battery wired with the inverter is 1, other batteries dial the corresponding
address according to the dial code address rule
2. Continuous current 100A. 6AWG or 4AWG wire is recommended for the power cord
Other manuals for KMD-PJ24100
1
This manual suits for next models
2
Table of contents
