Specifications
HDMI Signal Compatible with HDCP
Support resolutions 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
Network Cable UTP/STP Cat5/5e/6
Transmission distance Up to 120 meters transmission distance for 1080p
60Hz Full HD over single CAT6
IR signal
Working Temperature
Power Supply
Supports 20~60KHz IR devices
Items
DC5V/1A
0℃～60℃
3. IR User Guide
1）I R blaster extension cable should plug-in the IR-out port of TX (Sender)
of HDMI extender, and the IR receiver extension cable should plug-in
the IR-out port of the RX (Receiver) of HDMI extender.
2）T he emitter of IR blaster should as close as possible to the IR receiver of
the signal source device.
3）U sing the IR remote controller of the signal source device towards the IR
receiver (connected to the RX of HDMI extender), to remote control
source media playback.
Transport protocol HDbitT
Power Consumption TX: 3.5W; RX: 3W
Dimensions 130(W) x 84(D) x 23.2(H) mm*2PCS
Weight
Color Black
HDMI OUT
TV
HDMI EXTENDER
TX(Sender)
HDMI IN
DVD
HDMI EXTENDER
RX(Receiver)
Switch
Cable
HDMI OUT
TVHDMI EXTENDER
RX(Receiver)
HDMI OUT
TVHDMI EXTENDER
RX(Receiver)
2.3 One-to-many Connection: By using network router/switch，one
sender to several receivers, realize extender & splitter function.
Q：TV display “Waiting for connection” on the right corner?
A：Please check if the power supply of TX (Sender) and switcher (if used)
is connected, and make sure connecting cable is firmly.
Q：TV display “Please check the TX input signal”?
A：1) please check if there is a HDMI signal input of TX.
2) Try to connect the signal source directly to display device to see if
there is singal output from source device or change the signal source,
HDMI wire and try again.
2. Connections
HDMI IN Cable HDMI OUT
HDMI EXTENDER
TX(Sender)
HDMI EXTENDER
RX(Receiver)
TV
HDMI EXTENDER
TX(Sender)
HDMI IN
DVD
Switch
Cable
HDMI OUT
TV HDMI EXTENDER
RX(Receiver)
2.1 Point to Point connection: Up to 120 meters transmission dista-
nce over single CAT6 (High quality cable can reach 150 meters) .
2.2 Router Connection: By using network router/repeater, realize
unlimited extension.
Switch*N
TV
HDMI OUT
Note: Gigabit (1000Mbps) switcher is recommended in LAN transmission.
Follow the stanard of IEEE-568B:
1- Orange/white
2- Orange
3- Green/white
• Installation Procedures
1. How to make a Cat5e/6 network cable
4- Blue
5- Blue/white
6- Green
7- Brown/white
8- Brown
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
• Specification
• FAQ
Q：Display not fluent, not stable?
A：1) Please check the cable length between the TX to switch, the switch
to the RX and the connection between each level is within the
required range.
2) Click the"reset"button on the TX/RX front panel, reset and reconnect.
TX: 205g RX: 200g
DVD
