Kamstrup READy Mini Concentrator Operating instructions

Kamstrup A/S • 55122428_A3_GB_04.2019
READy Mini Concentrator
Warning!
Read instructions before installation
Installation and operation guide

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.20192
Disclaimer
All information provided in this document is copyright of Kamstrup. Licence is granted
to the user to freely use and distribute the information in complete and unaltered form,
provided that the purpose is to use or evaluate Kamstrup products. Distribution rights do
not include public posting or mirroring on Internet websites. Only a link to the Kamstrup
website can be provided on such public websites.
Kamstrup shall in no event be liable to any party for direct, indirect, special, general,
incidental, or consequential damages arising from the use of this information or any
derivative works thereof. The information is provided on an as-is basis, and thus comes
with absolutely no warranty, either express or implied. No right or licence is granted under
any intellectual property right, hereunder copyright, patent or trademark, of Kamstrup
to any other party. This disclaimer includes, but is not limited to, implied warranties of
merchantability, fitness for any particular purpose, and non-infringement.
Information in this document is subject to change without notice and should not be
construed as a commitment by Kamstrup. While the information contained herein is
believed to be accurate, Kamstrup assumes no responsibility for any errors and/or
omissions that may appear in this document.
Copyright Information
Copyright ® Kamstrup A/S
Industrivej 28
Stilling
DK-8660 Skanderborg, Denmark
All Rights Reserved
The graphics and content in this document are the copyrighted work of Kamstrup and
contain proprietary trademarks and trade names of Kamstrup.
Third parties
This document may contain links to other parties. Kamstrup makes no warranty or
representation regarding any linked information appearing therein. Such links do not
constitute an endorsement by Kamstrup of any such information and are provided only
as a convenience. Kamstrup is not responsible for the content or links displayed by third
parties.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 3
Symbols used in this document
Warning
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Caution
Indicates a situation, which, if not avoided, could result in damage to equipment,
mild injury or loss of data.
Note
Important information, e.g. preconditions or necessary steps before proceeding, etc.
Warnings in this document
Warnings:
The contents of this guide and the quick guide included with the device must be
followed at all times when installing, configuring or handling the device in gener-
al. If these guides are not followed, Kamstrup cannot be held accountable for any
malfunctions or misuse of the product.
Cautions:
The product may only be installed by trained personnel.
Do not remove the product labels as they contain important information.
Read the Kamstrup Wireless M-Bus radio network installation guide before
installation.
READy Mini Concentrator is designed to operate from 0 °C to 50 °C. Using the
device outside the intended operating temperature may cause deterioration of
lifetime or in worst case operating failure.
READy Mini Concentrator has an IP20 rating, please install it accordingly.
Only use the supplied power adapter: AC/DC Power Adapter SMP0088B050200.
If you have purchased READy Mini Concentrator model 6696-5100, please insert
the SIM card before you power on the device.
If the product is decommissioned for disposal, please see section 7 ‘Disposal’.
READy Mini Concentrator must be stored within the following conditions.
Dispose of the product correctly.
When disposing of the product, remember to cancel the data subscription asso-
ciated with the SIM card.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.20194
Contents
1 Product introduction 5
1.1 System overview 5
1.2 READy Mini Concentrator overview 6
1.3 Data security 6
1.4 Data transmission 6
1.5 Data persistence 6
2 Before you begin 7
2.1 Precautions 7
2.2 Register your device 8
2.3 SIM card and data subscription 9
2.3.1 Configuration 9
2.3.2 Data subscription 9
2.3.3 Disposal or decommissioning 9
3 Installation and configuration 9
3.1 Installation preconditions 9
3.2 Installation locations 10
3.2.1 Installation for priority data 10
3.2.2 Installation for hourly data 10
3.3 Installation of READy Mini Concentrator 10
3.3.1 Preconditions 10
3.3.2 Installation steps 11
3.4 Configuration of READy Mini Concentrator 11
3.4.1 Configuration within 20 m of the meters that you intend to read 12
3.4.1.1 For Ethernet and GSM 12
3.4.1.2 For Wi-Fi installation 12
3.4.2 Configuration more than 20 m from the meters that you intend to read 12
4 Operation 16
4.1 Normal operation 16
4.2 Decommissioning 16
4.3 Redeployment and configurations 16
5 Maintenance and support 16
5.1 Transport 16
5.2 Firmware updates 16
5.3 Kamstrup support 16
6 Storage 17
7 Disposal 17
7.1 Disposal by Kamstrup A/S 17
7.2 The customer sends for disposal 17
7.3 Disposal by the customer himself 17
8 Troubleshooting and FAQ 18
8.1 Installation 18
8.2 Operation 19
8.3 Maintenance 19
9 Warranty 20
10 Markings 20

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 5
1 Product introduction
READy Mini Concentrator is a small data collector that collects wireless M-Bus signals
from smart energy and water meters or sensors and transmits the data via Ethernet,
Wi-Fi cellular 2G connection to READy Manager. READy Mini Concentrator has a reach of
approximately 40-60 m depending on the installation environment.
READy Mini Concentrator is available in two versions:
Description Type number
Ethernet/Wi-Fi 6696-5000
Ethernet/Wi-Fi/GSM 6696-5100
1.1 System overview
x 25

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.20196
1.2 READy Mini Concentrator overview
READy Mini Concentrator features a power plug-in and Ethernet port on the back.
At the front: On the front side of READy Mini Concentrator, a button is available for turning
on Wi-Fi on the device. This is used to configure a Wi-Fi connection from READy Mini
Concentrator to an available Wi-Fi network.
At the bottom: At the bottom of READy Mini Concentrator, there is a USB connection, which
has no functionality. The GSM version (6696-5100) has a micro SIM card slot at the bottom.
Two keyhole brackets are featured as well.
Power adapter: AC/DC Power Adapter SMP0088B050200
1.3 Data security
READy Mini Concentrator is part of the complete end-to-end data encryption in the READy
Suite.
Data is AES 128 bit end-to-end encrypted from the meter to READy Manager, and READy
Mini Concentrator only has the ability to forward data transparently.
1.4 Data transmission
READy Mini Concentrator forwards data depending on your READy Manager subscription.
READy Manager subscriptions include:
1. Daily values
2. Hourly values (requires a READy license with hourly values)
3. Priority data (requires the Priority data add-on in READy Manager)
1.5 Data persistence
In case of connection issues to READy Manager, daily and hourly data received by READy
Mini Concentrator is persisted for 14 days. Priority data is persisted for the last hour.
Figure 2 - READy Mini Concentrator back viewFigure 1 - READy Mini Concentrator front view
Figure 3 - READy Mini Concentrator bottom view

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 7
2 Before you begin
2.1 Precautions
The contents of this guide and the quick guide included with the device must be
followed at all times when installing, configuring or handling the device in general.
If these guides are not followed, Kamstrup cannot be held accountable for any
malfunctions or misuse of the product
The product may only be installed by trained personnel
Do not remove the product labels as they contain important information
Read the Kamstrup Wireless M-Bus radio network installation guide before
installation
The device must be registered before it can be imported into READy Manager
When unpacking READy Mini Concentrator, ensure that all of the following are included:
• 1 x READy Mini Concentrator
• 1 x power adapter
• 1 x 1 m Ethernet cable
• 1 x quick installation guide

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.20198
2.2 Register your device
Please register your READy Mini Concentrator in your My Kamstrup account in order to get
the encryption key. Please follow these steps:
1. Log in to My Kamstrup and go to Encryption Key Service:
2. Go to Manage devices and Register device:
3. Enter the serial number and device code to register READy Mini Concentrator in your My Kamstrup account:

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 9
2.3 SIM card and data subscription
If you have purchased READy Mini Concentrator 6696-5100 that includes the 2G GSM
modem, a micro SIM card with an active subscription is required to send data.
2.3.1 Configuration
The SIM card needs the following configuration:
• APN = Internet
• No PIN code
If the SIM card is not PIN code free, the PIN code can be removed from the SIM card by
using your phone:
1. Insert the SIM card in your phone
2. Go to settings and security to deactivate the SIM PIN code
3. Reboot the phone to check that the SIM card does not ask for a PIN code
2.3.2 Data subscription
The data subscription can be determined from the following data usage table for READy Mini
Concentrator. Firmware upload may take up to 55 MB and is remotely initiated by Kamstrup.
Normal Priority data
1 meter 0.25 MB/month 8 MB/month
10 meters 2 MB/month 80 MB/month
25 meters 5 MB/month 200 MB/month
2.3.3 Disposal or decommissioning
When disposing of/decommissioning the product, remember to cancel the data
subscription associated with the SIM card.
3 Installation and configuration
3.1 Installation preconditions
READy Mini Concentrator is designed to operate from 0 °C to 50 °C. Using the
device outside the intended operating temperature may cause deterioration of
lifetime or in worst case operating failure.
READy Mini Concentrator has an IP20 rating, please install it accordingly.
Only use the supplied power adapter: AC/DC Power Adapter SMP0088B050200.
If you have purchased READy Mini Concentrator model 6696-5100, please insert
the SIM card before you power on the device.
If you have purchased READy Mini Concentrator model 6696-5100, ensure to
remove the SIM PIN code before installing the SIM card in the device.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201910
3.2 Installation locations
READy Mini Concentrator can be installed both vertically and horizontally.
READy Mini Concentrator has a reach off approximately 40-60 m depending on the
installation environment. Install READy Mini Concentrator as close to the meters as
possible, however at least 50 cm from the meters you intend to read.
READy Mini Concentrator can be installed both vertically and horizontally. It is designed to
be installed indoors in residential or commercial environments either on public or private
property. The device can be installed on a wall using the keyhole bracket at the bottom of
the device or placed on a plain surface.
Consider aspects as reflection and absorption of radio signals when installing READy Mini
Concentrator. Install READy Mini Concentrator up high to allow free radiation around the
built-in antenna.
3.2.1 Installation for priority data
To maintain a stable priority data reception from the meter to READy Mini Concentrator, install READy Mini Concentrator with
line of sight to the meter, no more than 20 m away.
If READy Mini Concentrator does not have line of sight to the meter, the distance between READy Mini Concentrator and the
meter should not exceed 10 m.
3.2.2 Installation for hourly data
Hourly data gives READy Mini Concentrator much longer time to collect and log data from the meter. This installation scenario
is less demanding than the installation for priority data with 5-minute values. This means that you can install READy Mini
Concentrator further away from the meter. Kamstrup advises you to check the signal quality of READy Mini Concentrator
during commissioning on the installation website. If the signal bar is 1 or more, the installation is acceptable.
3.3 Installation of READy Mini Concentrator
3.3.1 Preconditions
Required items:
• READy Mini Concentrator
• Power adapter
• Optional SIM card for GSM version 6696-5100
• 2 x screws for wall mounting (not included)
Figure 4 - READy Mini Concentrator orientation

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 11
3.3.2 Installation steps
Ensure that READy Mini Concentrator can read the intended meters at/near the
final installation site before proceeding. See section 3.4 “Configuration of READy
Mini Concentrator” for configuration.
Install READy Mini Concentrator near a wall socket that cannot be switched off by
accident.
1. Unbox READy Mini Concentrator, the power adapter and the quick guide
2. Place READy Mini Concentrator on the intended installation site:
a. Install READy Mini Concentrator on a wall using the keyhole brackets at the
bottom of the device
b. Place READy Mini Concentrator on a plain surface
3. If you have purchased the GSM (6696-5100) version of the product, insert the SIM
card before powering on the product
4. Insert the power adapter in a wall socket and READy Mini Concentrator
5. The installation is complete. Follow the configuration steps to ensure that READy
Mini Concentrator can read the intended meters/sensors
3.4 Configuration of READy Mini Concentrator
READy Mini Concentrator can connect to READy Manager via Ethernet, Wi-Fi or the optional
GSM connection. Follow the instructions for each connection method.
READy Mini Concentrator has 2 different configuration scenarios:
Requirements:
• READy Mini Concentrator is placed on the final installation site and powered on
• Inserted SIM card for model 6696-5100
• An Ethernet connection or a Wi-Fi network
• A computer or phone for configuration
20 m
20 m
2. Installation more than 20 m away from the meters that you intend to read. See section
3.4.2 for further information.
20 m 20 m
1. Installation within 20 m of the meters that you intend to read. See section 3.4.1 for
further information.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201912
3.4.1 Configuration within 20 m of the meters that you intend to read
3.4.1.1 For Ethernet and GSM
1. Insert SIM card or Ethernet cable.
2. Connect the power adapter – all LEDs on the
front turn on solidly for 30 seconds.
3. The power LED blinks for 4-5 minutes. When
the power and dot LEDs are solidly on, the
installation is complete.
4. Ensure that you can see READy Mini Concen-
trator on check.kamstrup.com. Note the time of
the reading.
Concentrator can be read
Last read 12-07-2018 02:00
See connected devices
Tes t the new device
3.4.1.2 For Wi-Fi installation
See the configuration steps for installations where the READy Mini Concentrator is more
than 20 m away from the meter(s)/sensor(s) that you intend to read. See section 3.4.2 for
further information.
3.4.2 Configuration more than 20 m from the meters that you intend to read
1. When the power and dot LEDs are solidly on, the
configuration can begin. This may take up to 5
minutes.
2. Press the top button on READy Mini Concentrator
(the Wi-Fi LED turns on solidly).

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 13
3. Use your phone/tablet/computer to connect to
the Wi-Fi SSID of READy Mini Concentrator.
The Wi-Fi SSID posted by READy Mini
Concentrator will present itself as
READyMiniConc_SERIAL where SERIAL is the
serial number of your device.
The Wi-Fi SSID posted by READy Mini
Concentrator is active for 15 minutes. If the Wi-
Fi timer runs out, press the top button again.
4. Enter the 8-digit WLAN code found at the bot-
tom of READy Mini Concentrator.
5.
5.1
5.2
Open a browser window and enter 192.168.2.10.
Enter your language, region and time zone.
Press Continue.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201914
6. Choose your connection method:
• Ethernet/Wi-Fi 6696-5000
• Ethernet/Wi-Fi/GSM 6696-5100
7.
7.1a
7.1b
7.2
Connect.
For Wi-Fi: Choose the Wi-Fi that you want to
connect to and enter the associated Wi-Fi
password.
For Ethernet/GSM: READy Mini Concentrator
recognizes the connection and shows that it is
connected.
Press Continue.
8.
8.1
Ensure that the meter(s)/sensor(s) that you
intend to read is/are shown on the list and that
the signal strength is acceptable (minimum 1
bar).
Press Continue.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 15
9. READy Mini Concentrator connects to READy
Manager, and the configuration is now complete.
10. Ensure that you can see READy Mini
Concentrator on check.kamstrup.com.
Concentrator can be read
Last read 12-07-2018 02:00
See connected devices
Test the new device

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201916
4 Operation
4.1 Normal operation
When READy Mini Concentrator is in normal operation, the power and dot LEDs are on
solidly. Data is sent according to your READy Manager subscription, and READy Mini
Concentrator automatically changes the transmission scheme if your READy subscription
or settings change.
If the power supply is disconnected or interrupted and connected later, the device
automatically connects to READy Manager again – there is no need for reconfiguration.
If the exclamation mark LED blinks red, READy Mini Concentrator has lost connection to
the Internet. Reconfigure READy Mini Concentrator through the WLAN interface.
4.2 Decommissioning
If the product is decommissioned for disposal, see section 7 ‘Disposal’.
If READy Mini Concentrator is to be decommissioned, simply unplug the power supply.
READy Mini Concentrator will immediately stop sending data to READy Manager and is
ready to be installed at a new location or disposed of.
4.3 Redeployment and configurations
For redeployment of READy Mini Concentrator, follow the installation and configuration
steps in section 2.2.
5 Maintenance and support
READy Mini Concentrator does not require any maintenance other than cleaning.
5.1 Transport
When unplugged, READy Mini Concentrator is ready to be transported. If possible, use the
standard packaging when transporting READy Mini Concentrator.
5.2 Firmware updates
READy Mini Concentrator supports FOTA and automatically updates its firmware, if
necessary. Firmware is pushed directly to the device from Kamstrup.
5.3 Kamstrup support
Hotline: [phone]
Email: [email protected]
Support site: https://support.kamstrup.dk

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 17
6 Storage
READy Mini Concentrator must be stored under the following conditions:
• IP class 20
• Relative humidity: 5 % - 85 %, non-condensing
• Recommended storage temperature: 15 °C to 30 °C
7 Disposal
Dispose of the product correctly.
When disposing of the product, remember to cancel the data subscription
associated with the SIM card.
Kamstrup A/S holds an environmental certification according to ISO 14001 and as part of
our environmental policy, we use materials that can be disposed of in an environmentally
sustainable manner to the greatest extent possible. Ensure correct disposal of all parts of
the device. The enclosure must be disassembled to dispose of the batteries, electronics
and enclosure correctly.
7.1 Disposal by Kamstrup A/S
Kamstrup A/S accepts READy Mini Concentrator by the end of operation for
environmentally correct disposal according to previous agreement. The disposal is free of
charge to the customer, except for the cost of transportation to Kamstrup A/S.
7.2 The customer sends for disposal
Hand in the complete READy Mini Concentrator for approved national/local disposal.
Enclose a copy of this page to inform the recipient of the contents.
7.3 Disposal by the customer himself
For disposal of READy Mini Concentrator, see table below.
Any questions about environmental conditions can be directed to:
Kamstrup A/S
Att.: Miljø- og kvalitetsafd.
Fax.: [phone]
[email protected]
Topic Material information Recommended disposal
Printed circuit board Coppered epoxy laminate, components soldered on PCB scrap for metal recovery
Plastic enclosure PPS Plastic recovery
Power adapter Electronic waste
Cardboard packaging Cardboard recycling
Plastic insert in packaging PPS Plastic recovery
Table 1 - Disposal table

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201918
8 Troubleshooting and FAQ
8.1 Installation
Q: Where should I install READy Mini Concentrator?
A: As close to or in the vicinity of the meters/sensors that you intend to read data from. The
maximum reach is 40-60 m depending on the building and obstacles to the radio signal.
Q: Should READy Mini Concentrator be installed vertically or horizontally?
A: The orientation of READy Mini Concentrator does not matter.
Q: Where and how do I download the encryption key for READy Mini Concentrator?
A: Register READy Mini Concentrator in your My Kamstrup account in Encryption Key
Service using the serial number and the two-letter device code, e.g.: 70525001/CA.
The device will now be available to download and import into READy Manager.
Q: READy Mini Concentrator will not connect to the Wi-Fi network, what can I do?
A: Make sure that you enter your password for the specific Wi-Fi correctly. Try to access
the network with your phone/tablet/computer to ensure that the connection has been
established. If the issue persists, reboot READy Mini Concentrator, wait for the dot and
power LEDs to be solidly on, and go through the configuration again.
Q: The meters that I want to read are not seen in the on-screen configuration, what can I do?
A: Make sure that the meter/sensor radio is on. Depending on the meter configuration, it
can take up to 96 seconds to receive a data package.
Move closer to the meter that you want to receive data from – depending on the building
and potential obstacles to the radio signal, the range of reception may be limited.
Q: READy Mini Concentrator did not successfully connect to READy Manager, what can I do?
A: Ethernet: Make sure that the router, which READy Mini Concentrator is connected to, has
a working Internet connection.
Make sure that no firewall is blocking the communication on HTTPS port 443. If the issue
persists, check the Internet connection with a phone/tablet/computer. If there is no
Internet connection, contact your Internet service provider.
Wi-Fi: Make sure that you enter the correct Wi-Fi password for the specific Wi-Fi that you
want READy Mini Concentrator to use. Also, ensure that the router has a working Internet
connection.
Make sure that no firewall is blocking the communication on HTTPS port 443. If the issue
persists, check the Internet connection with a phone/tablet/computer. If there is no
Internet connection, contact your Internet service provider.
GSM: Make sure that the SIM card is configured correctly. Removed PIN code and APN =
Internet.
Q: READy Mini Concentrator is not responding, what can I do?
A: Insert a pin in the small hole at the bottom of READy Mini Concentrator until the
power LED starts flashing. READy Mini Concentrator will factory reset. Set up READy Mini
Concentrator again.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 19
8.2 Operation
Q: I do not receive data from READy Mini Concentrator in READy Manager, what can I do?
A: Go to check.kamstrup.com and make sure that READy Mini Concentrator can be read.
If READy Mini Concentrator can be seen on check.kamstrup.com, make sure that you
have imported READy Mini Concentrator and the meters that you want to read into READy
Manager.
If READy Mini Concentrator cannot be seen on check.kamstrup.com, the device may not
have Internet connection. Simply try to reboot the device. If the issue persists, go through
the configuration of READy Mini Concentrator.
Q: How do I import READy Mini Concentrator?
A: READy Mini Concentrator is imported into READy Manager like any other READy
infrastructure device by automatic import from Encryption Key Service on My Kamstrup or
manual KEM file import.
Q: Can I change the connection method of READy Mini Concentrator?
A: Yes. Simply go through the web interface configuration again. If changing from a GSM
connection to either Wi-Fi or Ethernet, remember to disconnect the SIM card.
Q: Do I have to pair the devices that I want to read data from with READy Mini Concentrator?
A: No. READy Mini Concentrator will automatically read your devices once they are
imported into READy Manager.
If you add more devices near READy Mini Concentrator in the future, simply import the
devices into READy Manager and they will automatically be read.
Q: READy Mini Concentrator is not responding, what can I do?
A: Insert a pin in the small hole at the bottom of READy Mini Concentrator until the
power LED starts flashing. READy Mini Concentrator will factory reset. Set up READy Mini
Concentrator again.
Q: The exclamation mark LED is blinking on READy Mini Concentrator, what does this
mean?
A: READy Mini Concentrator has lost its connection to READy Manager. Ensure that the
device has a working Internet connection.
8.3 Maintenance
Q: Do I have to update READy Mini Concentrator?
A: No. READy Mini Concentrator supports FOTA and will automatically update its firmware,
if necessary.

Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.201920
9 Warranty
Kamstrup standard product warranty:
• 2 years starting from the delivery date
• Covers defects in workmanship and mechanical errors
• In case of any errors covered by the standard warranty, the product is repaired or replaced free of charge
• The warranty also covers all product components including consumables
For extended warranty, please contact Kamstrup support:
Hotline: [phone]
Email: [email protected]
Support site: https://support.kamstrup.dk
10 Markings
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
T: [phone]
F: [phone]
[email protected]
kamstrup.com