Kandolite KMLSP150W User manual

USER MANUAL
KMLSP150W

I n d e x
Summarize ......................................................................... 3
Product introduction .......................................................... 3
Safety in truction ............................................................... 4
In tallation in truction ........................................................ 5
Main function ..................................................................... 6
Di play operation in truction............................................... 7
Menu in truction ................................................................. 9
DMX controller function ......................................................16
XRL connection in truction .................................................20
Wiring diagram ..................................................................21
Problem analyze.................................................................22
Maintenance.......................................................................23
Technical’ pecification…………….……………………….. .………24

Summarize
Thank you for purchasing our LED Moving lighting. Please read these instructions
carefully before begin and operate the fixtures according to these instructions to
avoid any possible damages and accidents causes by misusage.
Product introduction
This light uses andolite MLSP150w LED light source . The output luminous flux
reaches 6200lm. It has 50000-100000hours life span. Compared with
traditional moving head (with Gas discharge light bubble ), it is featured by light
weight, energy-saving and long life span. The rotation angle is Pan 540°, tilt 270°.
It has the functions of auto reset and correction and 16bit fine adjustment. The
configuration includes: 2 gobo wheels, 2 color wheels, iris, zoom, focus, prism and
Atomization. International standard DMX 512 signal is requested. The
combination of DMX512 and DMX Ethernet network is optional
Packing li t
•MLSP150W 1PC
•Clamp hanger 2pcs
•Quick release lock 4set
•Safety cable 1pc
•Power cable
•user manual
Page 3 of 26

Safety in truction
•Please open the carton and check whether there is any damage at the arrival
of the fixture. If there is any damage caused by transportation, please do
not use the fixture and contact the distributor or manufacturer as soon as
possible.
• Make sure the power supply voltages are consistent with this lights ， Ensure
the use of voltage is in the range of the request technical parameter.
•Before the installation, please check the light’s fasteners and mechanical
structure have been received in good condition and appear no damage.
• This light is designed for indoor use. The protection rate is IP20. The
fixture should be kept dry from water and other liquids. Do not use it in a
humid, overheated and dusty environment. The working temperature is
lower than 50 degree.
•The fixtures maybe mounted in any position provided there is adequate
room for ventilation. Make sure there are no inflammable and explosive
items (ornaments) in 0.5 meters away. Do not project the light on
flammable materials. The distance between the fixture and lighting
object should be more than 5m.
• Do not open the fixture to repair by yourself.
• Ensure safe grounding of Yellow / green cable and install electricity
according to relative standards. Don’t shake the fixture when it is working.
•Only qualified personnel can do electricity connection.
•Please do not connect the fixture with any other dimming devices.
•Please do not use power cable with incomplete insulation and don’t
connect the power cable with other wires. When the fixture is not in use
or in cleaning, please make sure to turn off the power.
Page 4 of 26

If you have any questions or suggestions, please contact the distributor or manufacturer
promptly.
In tallation in truction
Dimension diagram
Clamp
Release lock
Handle
Page 5 of 26

For Safey wire
Instruction for changing interchangeable gobos
Fixed gobos
Wheels gobo wheels
Color wheel 1 color wheel 2
Page 6 of 26

Main function
150W high brightness LED
2 gobo wheels, 2 color wheels, iris, zoom, focus, prism and Atomization
Accord with DMX512 protocol. Wireless DMX and DMX Ethernet network is
optional.
The color wheel can reach any position
2 DMX channel modes
Multi strobe effect, 5 dimmer modes
Sound control, auto run
Master-slave mode: no need to set slave manually; the slave will receive
data from master automatically
The fixture parameter can be downloaded mutually
When the fan is not working, the LED won’t light up
Page 7 of 26

Di play Operation
MENU : access the menu or return to a previous menu option
ENTER : select the current menu option
UP : menu selection or parameter increments
DOWN : menu selection or parameters decrease
Page 8 of 26

Menu in truction
MENU
DMX
ADDRESS 001-512
OPTION PAN INVERTE ON/OFF
TILT INVERTE ON/OFF
P/T SWAP ON/OFF
P/T FEEDBAC ON/OFF
DIMMER MODE
OFF,DIMMER1,DIMMER2,DIMMER3,DIMMER4
CHANNEL MODE 17CH/19CH
DISPLAY DISPLAY INTENSITY 01-32
DISPLAY SLEEP PERMANENTLY ON/2 MINUTES/5
MINUTES/10 MINUTES
MANUAL
CONTROL CH1:INTENSITY 0-255
CH2:SHUT/STROBE
0-255
CH3:PAN 0-255
CH4:PAN FINE 0-255
CH5:TILT 0-255
CH6:TILT FINE 0-255
CH7:P/T SPEED 0-255
CH8:GOBO1 0-255
CH9:GOBO1
ROTATE 0-255
CH10:GOBO2
0-255
CH11:COLOR1 0-255
CH12:COLOR2 0-255
CH13:IRIS 0-255
CH14:ZOOM
0-255
CH15:FOCUS
0-255
CH16:PRISM
0-255
CH17:ATOMIZATION
0-255
CH18:MOVING
BLAC OUT 0-255
CH19:CONTROL
0
CALIBRATION
GOBO1
0-255
GOBO2
0-255
COLOR1
0-255
COLOR2 0-255
TEST
OPERATION
SOUND CONTROL
RUNNING… *

Note:
1. When entering MENU *, the fixture is set automatically as a master to send
data and the other fixtures will receive the data and work synchronously. When
turn on the light again after power off, the fixture will jump to the same
position.
2. The content with underline is factory default value
7 、
、、
、 2 DMX addre code etting
MENU DMX ADDRESS 001-512
Choose 【 DMX ADDRESS 】 from menu, press 【 ENTER 】 to set DMX address
code
Press 【 UP/DOWN 】 to choose from 【 1~512 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 3 option etting
MENU OPTION PAN INVERTE ON/OFF
TILT INVERTE ON/OFF
P/T SWAP ON/OFF
P/T FEEDBAC ON/OFF
DIMMER MODE OFF,DIMMER1,DIMMER2,DIMMER3,DIMMER4
CHANNEL MODE
17CH/19CH
Page 10 of 26
AUTO RUNNING… *
FACTORY
DEFAULT
CALIBRATION LOAD
YES/NO
SETTING LOAD
YES/NO
FIXTURE
RESET YES/NO
SEND
SETTING YES/NO

7 、
、、
、 3 、
、、
、 1 PAN INVERTE
Choose 【 PAN INVERTE 】 from menu, press 【 ENTER 】 to set PAN INVERTE
Press 【 UP/DOWN 】 to choose 【 ON 】 or 【 OFF 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 3 、
、、
、 2 TILT INVERTE
Choose 【 TILT INVERTE 】 from menu, press 【 ENTER 】 to set TILT INVERTE
Press 【 UP/DOWN 】 to choose 【 ON 】 or 【 OFF 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 3 、
、、
、 3 PAN/TILT SWAP
Choose 【 P/T SWAP 】 from menu, press 【 ENTER 】 to set PAN/TILT SWAP
Press 【 UP/DOWN 】 to choose 【 ON 】 or 【 OFF 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 3 、
、、
、 4 PAN/TILT FEEDBAC
Choose 【 P/T FEEDBAC 】 from menu, press 【 ENTER 】 to set PAN/TILT
FEEDBAC
Press 【 UP/DOWN 】 to choose 【 ON 】 or 【 OFF 】
Press 【 ENTER 】 to exit and save the option
Note ：
：：
：
After pressing 【 ENTER 】 to confirm, PAN/TILT will reset automatically once
7 、
、、
、 3 、
、、
、 5 dimmer mode etting
Choose 【 DIMMER MODE 】 from menu, press 【 ENTER 】 to set dimmer modes
Press 【 UP/DOWN 】 to choose 【 OFF 】，【 DIM1 】，【 DIM2 】，【 DIM3 】 or 【 DIM4 】
Press 【 ENTER 】 to exit and save the option
Note:
From 【 OFF 】 to 【 DIM4 】 , the dimming speed is fast to slow.
Page 11 of 26

7 、
、、
、 3 、
、、
、 6 DMX channel mode etting
Choose 【 CHANNEL MODE 】 from menu, press 【 ENTER 】 to set DMX channel
Press 【 UP/DOWN 】 to choose 【 17CH 】 or 【 19CH 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 4 di play etting
MENU DISPLAY DISPLAY INTENSITY 01-32
DISPLAY SLEEP
PERMANENTLY ON/2
MINUTES/5 MINUTES/10
MINUTES
7 、
、、
、 4 、
、、
、 1 di play inten ity etting
Choose 【 DISPLAY INTENSITY 】 from menu, press 【 ENTER 】 to set display
intensity
Press 【 UP/DOWN 】 to choose 【 1~32 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 4 、
、、
、 2 di play leep mode etting
Choose 【 DISPLAY SLEEP 】 from menu, press 【 ENTER 】 to set display sleep
Press 【 UP/DOWN 】 to choose 【 PERMANENTLY ON 】，【 2 MINUTES 】，【 5
MINUTES 】，【 10 MINUTES 】
Press 【 ENTER 】 to exit and save the option
7 、
、、
、 5 manual control etting
MENU MANUAL CONTROL CH1:INTENSITY 0-255
CH2:SHUT/STROBE 0-255
CH3:PAN 0-255
CH4:PAN FINE 0-255
CH5:TILT 0-255
CH6:TILT FINE 0-255
CH7:P/T SPEED 0-255
CH8:GOBO1 0-255

CH9:GOBO1 ROTATE 0-255
CH10:GOBO2 0-255
CH11:COLOR1 0-255
CH12:COLOR2 0-255
CH13:IRIS 0-255
CH14:ZOOM 0-255
CH15:FOCUS 0-255
CH16:PRISM 0-255
CH17:ATOMIZATION 0-255
CH18:MOVING BLAC OUT
0-255
CH19:CONTROL 0
Choose 【 MANUAL CONTROL 】 from menu, press 【 ENTER 】 to set manual
control of DMX value of 【 CH1 】 ~ 【 CH19 】
Press 【 UP/DOWN 】 to choose 【 0~255 】
Press 【 ENTER 】 to exit and save the option
Note:
Please find the DMX value of 【 CH1 】 ~ 【 CH19 】 at DMX control function
7 、
、、
、 6 gobo and color wheel po ition calibration etting
MENU CALIBRATION GOBO1 0-255
GOBO2 0-255
COLOR1 0-255
COLOR2 0-255
Choose 【 CALIBRATION 】 from menu, press 【 ENTER 】 to set gobo and color
wheel position calibration
Press 【 UP/DOWN 】 to choose 【 0~255 】
Press 【 ENTER 】 to exit and save the option
Page 13 of 26

Note:
1 、 After pressing 【 ENTER 】 to confirm, gobo and color wheel will reset
automatically once
2 、 when the value is 128 ， the gobo and color wheel are in the middle; when
the value is below 128, the gobo and color wheel are moving left by fine
adjustment; when the value is above 128, the gobo and color wheel are moving
right by fine adjustment.
7 、
、、
、 7 te t operation etting
MENU TEST OPERATION SOUND CONTROL RUNNING… *
AUTO RUNNING… *
7 、
、、
、 7 、
、、
、 1 ound control mode
Choose 【 SOUND CONTROL 】 from menu, press 【 ENTER 】 to enter SOUND
CONTROL mode
Note:
The sound control sensitivity is realized by adjusting R3 on display board.
7 、
、、
、 7 、
、、
、 2 auto run mode
Choose 【 AUTO 】 from menu, press 【 ENTER 】 to enter auto run mode
7 、
、、
、 8 recover factory default etting
MENU FACTORY DEFAULT
CALIBRATION LOAD
YES/NO
SETTING LOAD YES/NO
7 、
、、
、 8 、
、、
、 1 recover factory default of gobo and color wheel po ition calibration
load
Choose 【 CALIBRATION LOAD 】 from menu, press 【 ENTER 】 to recover the
factory default of gobo and color wheel position calibration load
Press 【 UP/DOWN 】 to choose 【 YES 】
Press 【 ENTER 】 to exit and save the option
Page 14 of 26

Note:
1 、、 After pressing 【 ENTER 】 to confirm, gobo and color wheel will reset
automatically once
2 、 the factory default value is 128, i.e. the middle.
7 、
、、
、 8 、
、、
、 2 recover factory default of etting parameter
Choose 【 SETTING LOAD 】 from menu, press 【 ENTER 】 to recover the factory
default of setting parameter
Press 【 UP/DOWN 】 to choose 【 YES 】
Press 【 ENTER 】 to exit and save the option
Note:
After pressing 【 ENTER 】 to confirm, PAN/TILT will reset automatically once
7 、
、、
、 9 fixture re et
MENU FIXTURE RESET YES/NO
Choose 【 FIXTURE RESET 】 from menu, press 【 ENTER 】 to enter fixture reset
Press 【 UP/DOWN 】 to choose 【 YES 】
Press 【 ENTER 】 to confirm reset
7 、
、、
、 10 end etting parameter to other fixture
MENU SEND SETTING YES/NO
Choose 【 SEND SETTING 】 from menu, press 【 ENTER 】 to set sending setting
parameters to other fixtures
Press 【 UP/DOWN 】 to choose 【 YES 】
Press 【 ENTER 】 to confirm sending
Page 15 of 26

Note:
1 、 Should disconnect with DMX controller before sending the parameters.
2 、 The setting of 【 DMX ADDRESS 】 and 【 CALIBRATION 】 is invalid and won’t
be sent.
3 、 The other fixtures will reset automatically once after receiving data
correctly.
Page 16 of 26

DMX Control Function
17channel 19channel
DMX
value function
CH1 CH1
0~255
dimming ，
，，
， Inten ity
Zerofull
CH2 CH2
0~10
11~20
21~60
61~100
101~140
141~180
181~220
221~255
Shutter ，
，，
， Strobe
Shutter Closed
Shutter Open
Strobe ， slowfast
Electronic Sine wave ， slowfast
Random Strobe ， slowfast
Opening pulse ， slowfast
Closing pulse ， slowfast
Electronic Square wave ， slowfast
CH3 CH3 0~255 Pan
- CH4 0~255 Pan, fine
CH4 CH5 0~255 Tilt
- CH6 0~255 Tilt, fine
CH5 CH7 0-255 Pan/tilt speed
， fastslow
CH6 CH8
0~10
11~20
21~30
31~40
41~50
51~60
61~70
71~80
81~90
91~100
101~110
111~120
121~130
131~140
141~150
151~190
191~230
231~240
241~255
Gobo 1
no gobo
gobo1
gobo2
gobo3
gobo4
gobo5
gobo6
gobo7
shaking gobo1
shaking gobo2
shaking gobo3
shaking gobo4
shaking gobo5
shaking gobo6
shaking gobo7
CW flow effect ， slowfast
CCW flow effect ， slowfast
sound running
Reserved
CH7 CH9
0~20
21~80
81~140
Gobo rotation
No rotation
CW ， slowfast
CCW ， slowfast

141~220
221~255
CWCCW cycle ， slowfast
Reserved
CH8 CH10
0~10
11~20
21~30
31~40
41~50
51~60
61~70
71~80
81~90
91~100
101~110
111~120
121~130
131~140
141~150
151~190
191~230
231~240
241~255
Gobo 2
no gobo
gobo1
gobo2
gobo3
gobo4
gobo5
gobo6
gobo7
shaking gobo1
shaking gobo2
shaking gobo3
shaking gobo4
shaking gobo5
shaking gobo6
shaking gobo7
CW flow effect ， slowfast
CCW flow effect ， slowfast
sound running
Reserved
CH9 CH11
0~10
11~17
18
19~25
26
27~33
34
35~41
42
43~49
50
51~57
58
59~65
66
67~73
74
74~80
81~90
Color wheel 1
Open(white)
Continuou ly crolling color wheel po ition
OpenColor 1
Color 1
Color 1Color 2
Color 2
Color 2Color 3
Color 3
Color 3Color 4
Color 4
Color 4Color 5
Color 5
Color 5Color 6
Color 6
Color 6Color 7
Color 7
Color 7Open
Open
Stepped croll (indexed) color wheel
po ition
Open （ white ）

91~100
101~110
111~120
121~130
131~140
141~150
151~180
181~190
191~220
221~230
231~255
Color 1 （ dark blue ）
Color 2 （ orange ）
Color 3 （ red ）
Color 4 （ purple ）
Color 5 （ green ）
Color 6 （ pink ）
Color 7 （ light yellow ）
CW flow effect ， slowfast
Color wheel stop
CCW flow effect ， slowfast
sound running
Reserved
CH10 CH12
0~10
11~17
18
19~25
26
27~33
34
35~41
42
43~49
50
51~57
58
59~65
66
67~73
74
74~80
81~90
91~100
101~110
111~120
121~130
131~140
141~150
151~180
181~190
191~220
221~230
Color wheel 2
Open(white)
Continuou ly crolling color wheel po ition
OpenColor 1
Color 1
Color 1Color 2
Color 2
Color 2Color 3
Color 3
Color 3Color 4
Color 4
Color 4Color 5
Color 5
Color 5Color 6
Color 6
Color 6Color 7
Color 7
Color 7Open
Open
Stepped croll (indexed) color wheel
po ition
Open （ white ）
Color 1 （ fluorescent ）
Color 2 （ light green ）
Color 3 （ cooling tablet ）
Color 4 （ copious cooling ）
Color 5 （ yellow ）
Color 6 （ wine red ）
Color 7 （ light blue ）
CW flow effect ， slowfast
Color wheel stop
CCW flow effect ， slowfast

231~255 sound running
Reserved
CH11 CH13
0~150
151~190
191~230
231~255
Iri
Openclosed
Opening pulse ， slowfast
Closing pulse ， slowfast
Reserved
CH12 CH14 0~255 Zoom
（ zoom inzoom out ）
CH13 CH15 0~255 Focus
CH14 CH16
0~10
11~20
21~100
101~180
181~255
Pri m
No prism
prism active
CW ， slowfast
CCW slowfast
CWCCW cycle ， slowfast
CH15 CH17 0~50
51~255
No atomization
Atomization
CH16 CH18 0~50
51~255
Blackout while P/T moving
Disable
Enable
CH17 CH19
0~10
11~20
21~30
31~40
41~50
51~60
61~254
255
Control channel
Dimmer modes set by menu
Dimmer off
Dimmer 1
Dimmer 2
Dimmer 3
Dimmer 4
Dimmer modes set by menu
Reset (at least keep 5S)
Page 20 of 26