Karinear KNI-B46441 Specification sheet

MODEL:KNI-B46441
Instruction Manual / Installation Manual
INDUCTION HOB
Karinear

SAFETY WARNINGS
INSTALLATION
OPERATION AND MAINTENANCE
KNI-1

KNI-2

KNI-3

The cooking process has to be supervised.A short term
cooking process has to be supervised continuously.
If the surface is cracked, switch off the appliance to avoid
the possibility of electric shock, for hob surfaces of
glass-ceramic or similar material which protect live parts
CAUTION
In order to prevent tipping of the appliance,this stabilizing
means must be installed.Refer to the instructions for
installation.
WARNING
Use only hob guards designed by the manufactuer of the
cooking appliance or indicated by the manufacture of the
appliance in the instruction for use as suitable or hob
guards incorporated in the appliance.The use of inappro-
priate guards can cause accidents.
WARNING
Warning
KNI-4

CONGRATULATIONS
PRODUCT OVERVIEW
1. 160mm/1400W
2. 210mm /1800W
3. 180mm/1800W
4.160mm /1400W
5. Glass plate
6.Control panel
1.Heating zone selection controls
2.Stop&go control
3.Child lock control
4.Power / Timer regulating controls
5.Timer control
6.ON/OFF control
KNI-5
1
2
5
3
4
6
1
2 3 4 5 6

A WORD ON INDUCTION COOKING
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
KNI-6

KNI-7

PAN DIMENSIONS
USING YOUR HOB
KNI-8

LOCKING THE CONTROLS
KNI-9

WHEN YOU HAVE FINISHED COOKING
STOP&GO CONTROLS
When the hob is in the lock mode,all the controls are disable
except the ON/OFF and stop&go, you can always turn the
induction hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation
USING THE TIMER
KNI-10

KNI-11

KNI-12

!
KNI-13

COOKING GUIDELINES
!
KNI-14

HEAT SETTINGS
KNI-15

CARE AND CLEANING
KNI-16

HINTS AND TIPS
KNI-17

FAILURE DISPLAY AND INSPECTION
KNI-18

Weight and Dimensions are approximate. Because we continually strive
to improve our products we may change specifications and designs
without prior notice.
Under any circumstances, make sure the Induction cooker hob is well
ventilated and the air inlet and outlet are not blocked. Ensure the
Induction cooker hob is in good work state. As shown below
Cooking Hob KNI-B46441
4 Zones
220-240V~, 50-60Hz
6400W
590X520X61
560X490
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
HEAT SETTINGS
INSTALLATION
KNI-19