Kawai KM60 User manual

OWNERS MANUAL
Keyboard Monitor Amplifier
KM-60
Thank you for purchasing a Kawai KM-60 keyboard monitor amplifier.
Please read this Owner’s Manual carefully. It contains valuable infor-
mation which will hetp you use the unit to maximum effectiveness.
js

Features
Control Panel
(1) CH VOLUME knobs — Control the volumes for the corresponding
inputs.
(2) EQUALIZER control knobs (BASS/MIDDLE/TREBLE — control
the tone of the output of the high, middle and low ranges. ,
(3) MASTER control knobs
EFFECT — Controls the amount of effect added to the output.
REVERB — Controls the amount of reverberation added to the
output.
VOLUME —~ Controls overall output volume.
(4)
REVERB
switches
—
Switch
the
reverberation
on
and
off for
paired
channels (1&2 and 3&4).
(5)
EFFECT
switches
—
Switch
the
effect
on
and
off
for
paired
channels
(1&2 and3 & 4).
{6) POWER switch — Controls power to the unit. The pilot lamp next
to the switch lights when the unit is in operation.
REVERB [I]
BASS MIDDLE TREBLE EFFECT REVERB VOLUME
ee a, eo
C000 O90 VO
ech VOLUME- ai = EOŬALIZER = a “MASTER

Rear Panel
RETURN LINE
SEN OUT PHONES
G
-EFFECT -
(1) INPUT jacks — Accept inputs from up to four instruments.
(2) EFFECT jacks (SEND/RETURN) — Connect amplifier to echo
machine or other external effect.
(3) LINE OUT jack — Provides output for other audio equipment.
(4)
HODES
jack
—
Accepts,
the
standard
headphone
plug.
Plugging
in
asetor:
eadphien
aur
ornatically’
Gisconnects
thé
monitor
speaker
—
for
private
listening.
:
(5) MIDI (Musical Instrument Digital Interface) jacks f
IN — Accepts inpiit frontiñstřument with MIDI interface:
FHRU — FránsmitsMtDt-inpüt to other instruments; san?
re ey E "AGS
Warnings
(1)
Keep
the
amplitier
«
away
froni
neon
or
fluoteséent
fi
other
potential
noise
sources.
(2)
Always
reduce
the
volume
to
zero
before
conn
cti
gi
isconnect-
ing
the’
power.
Otherwise.
the
high
volume
might.
Overload
the
speaker
and
damage
it.
Pare
i
3
(3)
Plug
‘the
‘cord:
ito:
the
itstriiment
first
and
thant
into:
ee
amplifier,
Disconnect
in
the
reverse
order,
(4)
Protect
the
amplifier
from
physical
shocks
and
impact.
"Never
move
it
while
it
is
in
operation.
:
(5)
Shield
the
unit
from
moisture
and
dust.
i
(6)
Clean
the
case
with
a
cloth
and
possibly
a
mild
detergent.
Never
use
harsh
cleansers-or
organic
solvents.”

Main Specifications
Output 60 watts (rms)
Speakers ‘ 30 cm woofer and horn tweeter
Input jacks Four independent channels
Volume controls Four channels, MASTER, REVERB, and EFFECT
Three-band equalizer BASS, MIDDLE, TREBLE
REVERB switches Two
EFFECT switches Two . A
Effect loop jacks SEND and RETURN
LINE OUT jack One
Headphone jack One
MIDI interface One IN and three THRU
Power consumption 75W -
Dimensions 400 (W) x 575(H) x 340 (D) mm
Weight 21 kg
OM701E
Printed in Japan