Kaye Log NFC Temperature Logger User manual
Manufacturing
Air Freight
Warehouse / Trucks
Last Mile
Kaye Log the all-in-one solution for transporting your temperature sensitive products.
www.kayeinstruments.com
Kaye Log
NFC Temperature Logger
Instructions
SET DATA
To activate, push and hold
Start button until Green
LED light ashes.
Green LED light ashing
(Temperature is OK)
How to Program NFC Temperature Logger
1. Open the KayeNFC software program on computer
2. Place NFC temperature logger on NFC USB interface cradle
3. Click on Logger menu and then click on Start New Recording
4. Set NFC logger prole parameters for the cold holding environment
5. Select Basic Prole and enter Product Description and Tracking Number
6. Click on Start Recording and NFC USB Interface Cradle will beep multiple
times
7. On screen prompt will ask if you want to program another NFC logger.
Select Yes to program the same prole settings or No to enter new prole
settings
Green LED light ashing
(Temperature is OK)
Red LED light ashing
(Temperature Excursion
Alert)
GET DATA
How to Read NFC Temperature Logger
1. Open the KayeNFC software program on computer
2. Place NFC temperature logger on NFC USB interface cradle
3. Click on Logger menu and then click on Read Logger
4. Popup on screen will provide download status
5. Once download complete, data will be visible in KayeTrack.com
6. Log into KayeTrack.com, select NFC tab to view data and print reports NFC
Temperature Logger
Kaye Log the all-in-one solution for transporting your temperature sensitive products.
www.kayeinstruments.com
For product support, please contact:
AAS-930-013A 01/2020
ACTIVATE
How to Activate NFC Temperature Logger
To activate temperature logger, push the start button down for 5 seconds until
the green light starts ashing. Insert NFC logger into the product environment
right away.
To activate - push and hold Start button
until the Green LED light ashes.
When the green light ashes, recording
has started.
Green light ashing means recording
is active and there are no temperature
breaches. (Temperature is OK)
PRINT DATA
KayeTrack Cloud Portal Instructions
1. Go to computer and open web browser and visit www.kayetrack.com
2. Enter your case sensitive email
3. Enter the following password (case sensitive): KayeTrack123 (default)
4. Measurement dashboard will be default display. Click NFC tab to view
loggers
5. Click on Chart button to view the temperature strip chart. In the strip
chartscreen, click on PDF, XLS or CSV to download the temperature report
Table of contents
