Introduction
About the product
The VideoGhost is an intelligent hardware frame-grabber, compatible with DVI, HDMI, and
VGA signal sources such as computers and laptops. It features a built-in JPEG compressor,
and a high-capacity internal flash disk. Frames captured from the DVI, HDMI, or VGA bus will
be compressed and stored to the built-in flash drive. The VideoGhost may be switched to
flash drive mode at any time, and will pop-up as a removable disk, containing captured
screenshots as JPEG files. The device is 100% stealthy and does not influence the operation
of the computer, laptop, etc. No drivers or software are required, no configuration necessary,
works out of the box!
Features
•Compatible with all DVI, VGA, and HDMI devices
•Supports resolutions up to Full-HD (1920 x 1080) and WUXGA (1920 x 1200)
•Works with computers and external laptop monitors
•No power supply necessary (power is drawn from the USB port)
•Built-in JPEG encoder
•High-capacity internal flash memory, accessible as a USB removable drive
•Built-in time-stamping module with battery
•No software or drivers required, Windows, Linux, and Mac compatible
•Ultra-compact and discreet, mini-extension cable form factor
•Transparent to computer operation, undetectable for security scanners
Requirements
•Compatible DVI / HDMI / VGA video signal source (no HDCP encryption)
•Standard resolution up to 1920 x 1200 and bandwidth up to 160MHz
•Computer with standard USB 1.1 or 2.0 port
•Operating system with USB Mass-Storage device support
•Optionally MS Windows (only for running KL Tools)
