KegLand RAPT KL15813 User manual
RAPT Fermentation Chamber Quick Start Guide
Page 2of 5www.KegLand.com.au Last Updated 10/09/2021 2:13 PM
WARNING
IF THE FRIDGE HAS JUST BEEN MOVED DO NOT TURN ON UNLESS IT HAS
BEEN STANDING UPRIGHT FOR ATLEAST 24 HOURS. FAILURE TO DO SO
WILL VOID WARRANTY. STAND FRIDGE IN THE UPRIGHT POSITION FOR 24
HOURS BEFORE PLUGGING INTO MAINS POWER SOCKET.
WARNING
ALWAYS THOROUGHLY CHECK FOR GAS LEAKS ONCE YOU HAVE SET UP
YOUR SYSTEM.
WARNING
CO2GAS CAN BE DANGEROUS. MAKE SURE TO ALWAYS USE CO2IN A WELL-
VENTILATED SPACE.
WARNING
ENSURE THERE IS OVER 100 mm CLEARANCE AT THE BACK OF THE FRIDGE
TO ALLOW FOR ADEQUATE AIR FLOW AND VENTILATION
WARNING
BE CAREFUL NOT TO CONTACT THE EXPOSED COLD PLATE WHEN ADDING
OR REMOVING FERMENTERS OR KEGS.
RAPT Fermentation Chamber Quick Start Guide
Page 3of 5www.KegLand.com.au Last Updated 10/09/2021 2:13 PM
Watch our helpful instructional YouTube Videos
Video instructions now available. The KegLand YouTube Channel
(https://www.youtube.com/KegLand). You can find the link on our website www.KegLand.com.au
If there is any part of these videos above that you do not understand or you cannot access, please
call or email www.KegLand.com.au or your nearest KegLand Distributor for more assistance.
Important
Let the RAPT Fermentation Chamber / Fridge sit upright for at least 24 hours after delivery or
after sitting the unit on its side before turning the unit on.
Be careful not to contact the exposed cold plate on the inside of the RAPT Fermentation Chamber
/ Fridge when inserting or removing fermenters or kegs.
Always thoroughly check for gas leaks once you have set up your system if using the system for
keg dispensing or pressure fermentation.
RAPT TEMPERATURE CONTROLLER
RAPT Fermentation Chamber Quick Start Guide
Page 4of 5www.KegLand.com.au Last Updated 10/09/2021 2:13 PM
RAPT ACCOUNT SIGN UP
To utilise the Wi-Fi connectivity of the RAPT Fermentation Chamber you will need to sign up for an
account on the RAPT portal. This will allow you to create custom fermentation profiles, track and
monitor your fermentation temperature and compressor utilisation etc.
1. sign up for an account on the RAPT portal.
https://app.rapt.io/
2. Once signed up log in to your account on the RAPT website.
DEVICE REGISTRATION
Once you have made a RAPT account you will need to connect your RAPT Femrentation Chamber to
your Wi-Fi network.
Open your network and internet settings on your mobile device, tablet or computer and connect to
the KegLand RAPT wifi network using the password shown on the screen on your RAPT Fermentation
Chamber.
This will allow you to connect your RAPT Fermentation Chamber to your wifi network.
Once your RAPT Fermentation Chamber is connected to your wifi network you will then need to
register your device with your RAPT account.
When prompted on the screen, press the select (⏎)button to enter the main menu then select
“Register Device”.
Select “Add new Device” then select “RAPT Fridge” within the RAPT portal and follow the prompts to
register your device.
Note: The MAC address and Validation code will be displayed on the screen of your RAPT
Fermentation Chamber during Device Registration.
Once you have registered your device with your RAPT account you will be able to change the target
temperature manually on the RAPT Fermentation Chamber using the “Up”or “Down”arrows or
change the target temperature through the RAPT portal.
For detailed instructions regarding use of the RAPT portal or assembly of the RAPT Fermentation
Chamber including how to integrate a duotight BlowTie Spunding Valve or Inline Regulator, then
please refer to the following instructional YouTube video:
https://www.youtube.com/watch?v=MzMYYmGM2ik
RAPT Fermentation Chamber Quick Start Guide
Page 5of 5www.KegLand.com.au Last Updated 10/09/2021 2:13 PM
EXTENSION PROBE INSTALLATION & CALIBRATION
The RAPT fermentation Chamber comes as standard with a short temperature probe which
measures the air temperature within the RAPT Fermentation Chamber.
If you were looking for higher accuracy temperature measurement by inserting a temperature probe
into the thermowell of your fermenter you will need to install and calibrate a longer extension
temperature probe (sold separately, KL22460)
For instructions to install and calibrate this longer extension temperature probe please refer to the
following instructional YouTube video:
https://www.youtube.com/watch?v=7l0RtVw6-QM
TROUBLE SHOOTING
If you are unable to sign up an account or your RAPT Fermentation Fridge or RAPT portal displays an
error please forward as many visual pieces of supporting information and a detailed description of
the error to
Other manuals for RAPT KL15813
2
Table of contents
Other KegLand Refrigerator manuals
