Kelvinator KNEH66CFAWTX User manual

OPERATING AND INSTALLATION
INSTRUCTIONS OF ELECTRICAL
FREESTANDING
OVEN
KNEH66CFAWTX

Dear Customer,
We take offering quality products more than your expectation as
a goal, offers you the products produced in modern facilities
carefully and particularly tested for quality.
This manual is prepared in order to help you to use your
appliance that is manufactured by the most recent technology,
with confidence and maximum efficiency.
efore using your appliance, carefully read this guide that
includes the basic information for right and safe installation,
maintenance and use and contact to the nearest Authorized
Service for mounting of your product.

CONTENTS :
1. PRESENTATION AND SIZES OF PRODUCT
2. WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
4. USE OF YOUR OVEN
5. CLEANING AND MAINTENANCE
6. SERVICE AND TRANSPORT

PART 1 : PRESENTATION AND SIZES OF PRODUCT
1011
12
Part of List :
1- Cooktop Cover
2- Cooktop
3- Control Panel
4- Oven Door Handle
5- Drawer Cover
6- Supply Leg
7- Oven Door
8- Oven Tray
9- Wire Grid
10- Front Resistan e
11- Fan Store
12- Oven Lamp
13- Hotplate
56
1
2
3
4
78
9
ODEL SIZE(cm)
KNEH66CFAWTX 60*60*85
13

TAKE ALL IMPORTANT SECURITY MEASURES AND READ THE MANUAL
COMPLETELY BEFORE USING THE APPLIANCE
This appliance has been designed for non-professionel, domestic use only.
Surely control whether there is any damage after you unpacked the appliance.
If there is any defect; do not use the appliance and immediately contact to the
authorized maintenance service. As the materials used for package ( nylon, stapler,
strafoam. etc. ) may cause harmful effects to children, they should be collected and
removed immediately.
The appliance must be set up by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement.
efore connecting your appliance to the electric , carefully control
whether it is appropriate for the features determined on the package and/or data
plate on the appliance.
Compare the features of the electricity organization with the technical information
on the presentation label before plugging the appliance in.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
efore changing the ovens lamp, disconnect the appliance from supply.
Turn the appliance off before the operations such as cleaning or maintenance.
You can do it after plugging it off or turning the main switches off
Some parts of appliance may hold its heat for a long time, it is required to wait for
it to cool before touching onto the points that are exposed to the heat directly.
This appliance is not intended for use by persons(including children) with reduced
physical, sensory and mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
PART 2 : WARNINGS
Do not keep flammable materials close while the appliance is operating.
Pay attention to the cables of the other electrical devices operating near the
appliance, so as not to touch to hot points.
Pay attention the switches to be off position 0, when the appliance does not
operate.
The glass lid that some models have may crack when they are exposed to
extreme heat. Do not close the glass lid without being sure that the cooker is off
and cooled completely.

This manual is prepared for more than one model in common. Your appliance may
not have some of the features that is explained in manual. Pay attention to the
expressions that have figures, while you are reading the operating manual.
In case of the visible cracks on the ceramic surface of the oven, switch off the
oven.
During the use the appliance gets hot. Take special care to prevent touching of
heating elements inside oven cavity.
During grilling mode the oven door should be closed.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering of the
glass.
efore opening the lid covering the hotplates, take care that no liquids are on the
top of the lid. The lid is to closed not earlier than hobs have been cooled down.
Take care that the lid is in correct position under operation.
In case that highlight-halogen heaters are installed as hob elements do not stare
into the light.
In case that the oven will be placed on a socket steps must be resorted to prevent
falling down of the oven from the socket.
A steam cleaner shall not be used.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cut out, this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
FOR EFFICIENCY ND SECURITY OF PPLI NCE, WE RECOMMEND YOU LW YS TO
USE THE ORIGIN L SP RE P RTS ND TO C LL ONLY OUR UTHORIZED SERVICES
WHEN IN C SE OF NEED.
W RNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric
shock.
W RNING: ccessible parts may become hot during use. Young children should be kept away.
W RNING: Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.

P RT3 : INST LL TION ND PREP R TION FOR USE
This modern, functional and practical oven, that was manufactured with the most
quality parts and materials, will meet your needs in every respect. You must surely
read this manual in order not to have any problem in future and to be able to have
successfull results. The following information are the required rules for right
installation and service processes. It must be read especially by the technician who
will install the appliance.
Contact to Authori ed Service for mounting of your oven.
3. 1 INST LL TION OF OVEN
There are some factors that must be paid attention to while installing your oven.
Surely pay attention to our below suggestions in order to be able to prevent any
problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the oven
is set up, the furnitures height must not exceed the height of the cooker panel.
Pay attention not to place it near the refrigerator, there must be no flammable or
in flammable materials such as curtain, waterproof cloth etc. that will begin to burn
quickly, while selecting place for oven.
It is required there must be at least 2 cm blank space between the back cover of
oven and wall for air circulation.
The furniture close to oven must be manufactured resistant to heat more than
50 C° of the room temperature.
If the kitchen furniture are higher than the pan which the ovens cookers are on,
it must be at least 11 cm away from the ovens side.
The minimum heights from the ovens pan and wall cupboards and paddle boxes
with fan over the oven, are shown as below. Thus, the paddle box must be at
minimum 650 mm height from the cooker pan.
If there is no paddle box, this height must not be less than 700 mm.
This appliance must only be installed directly on the floor and not on a base.

The appliance is provided for fixed connection to the power supply. The connection
of the appliance to an electrical source must be done by authorized technician.
3.3 ELECTRIC CONNECTION ND SECURITY
During the electric connection, surely follow the instructions below.
The earthing cable must be connected to the terminal. You have to ensure the
cable with insulation to be connected to the power source during the connection of
cable. If there is not any appropriate earthed electric outlet in accordance with
regulations in the place where the appliance will be installed, immediately contact to
our authorized service.
The earthed electric outlet must be close to the appliance. Surely do not use the
extension cord.
The supply cable must not touch to the hot surface of the product.
In case the supply cable is damaged, surely contact to Qualified Service. The
cable must be changed by the authorized service.
The wrong electric connection may damage your appliance. Such damage is not
in guarantee extent.
The appliance is adjusted as appropriate for 220-240 Volts and 380-415V 3N Volts
of electricity. If the network electricity is different than this informed value, immediately
contact to our authorized service.
The electric cable must not touch to the hot parts of appliance. The electric cable
must not touch the back part of the appliance. Otherwise the electric cable of
appliance may be damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibility against any kind of damages
and losses that emanate from the following security norms.
Provide a means of disconnection from the supply having an air gap contact
separation of at least 3mm in all active (phase) conductors. Such means of disconnection
shall be incorporated in the fixed wiring according to the wiring rules.
For fixed connection, use the H05VV, H05V2V2 or H05RR type supply cord.
For fixed connection, use 3x2,5mm2 or 3x4mm2 sized cable according to appliances
power and terminal box label.
Some appliances can be equipped with special plug (Perilex or Norplug). If it is
necessary, change it with the same specified spare part.
Use 16A/400V 5 pin for perilex plug and 25A/250V for Norplug.
These plugs can be used only in some countries.

Its outside surfaces heat while your appliance operates. The interior surfaces of
oven, components that ensures the heat and steam that goes out are quite hot. Even
if the appliance is turned off, these parts hold its heat for a specific time. Do not touch
onto the hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming
up on condition of extreme heating. Never pour water to the flames occuring from oil.
Cover the saucepan or frypan with its cover in order to choke the flame that was
occured in this case and turn the cooker off.
The oven and heat adjustment switches must be adjusted and ovens clock must
be programmed for cooking in your oven. Otherwise the oven does not operate.
Do not leave anything on it when the door or drawer of oven is open. You may
unbalance your appliance or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper,
cloth etc.) into the lower drawer.
Plug it off when you do not use the appliance.
Protect your appliance against atmospheric effects. Do not leave it to effects
such as sun, rain, snow, powder etc.
3
2
1L
N4
5
PE
L2
L3
5x1.5 mm 380 V ,3N
5x1.5 mm 400 V ,3N
5x1.5 mm 415 V ,3N
3
2
1L
N4
5
PE
3 x 2.5 mm 220 V
3 x 2.5 mm 230 V
3 x 2.5 mm 240 V
Your appliance is produced in accordance with the related security instructions
connected with electrical appliance. The maintenance and repair works must be
made just by the authorized service technician who is trained by the producer firm.
The installation and repair works whitout following rules may endanger you.
3. 4 GENER L W RNINGS ND ME SURES

4.1 GENER L PPE RENCE ND TECHNIC L FE TURES OF YOUR OVEN
YE 66
LOWER HEATER
UPPER HEATER
TUR O HEATER
GRILL
1100 WATT
1200 WATT
2000 WATT
2000 WATT
4.2 PRESENT TION ND FE TURES OF THE CONTROL P NEL
4.3 USE OF HOTPL TES COOKERS
The electrical cooker is commanded by 7 graded switches. 0 of the grades is off location.
The use fields in response to other 6 grades are below.
Hotplates
1...... .....Keeping hot location
2-3.....Heating locations at low heat
4-5-6..Cooking - roasting and boiling
locations
°°
00
00
11
44
66
22
33
00
11
44
66
22
33
00
11
55
44
66
22
33
00
11
55
44
66
22
33
00
50°50°
100°100°
150°150°
200°200°
MaxMax
KNEH66
Oven Function
Switch
Oven Thermostat
Switch
Left
Back
Heater
Left
Front
Heater
Right Front
Heater
Right
Back
Heater
5555
11
44
66
22
33
00
55

The upper part of hotplates is covered by a protective material resistant to heat. Turn
the switch of the electrical cooker to 3 and then operate the cooker for 5 minutes
in order to burn and so to toughen the protective layer at first use.
During use of electrical cookers, it is required to pay attention to the used saucepans
to have smooth bases. If appropriate sized and smooth based saucepans are used,
you can get the most efficiency from your cooker. It is not suggested to use the little
size saucepans on the big size cooker, because this will cause heat loss and so energy
will be wasted.
RIGHT WRONG
circular saucepan base
WRONG
small saucepan diameter
WRONG
saucepans base had not settled
Surely control that your cooker is off, the control switch is at 0 location after cooking.
Also never touch it as the cooker will be hot for a speific time after it was turned off.
Do not let children to come close to it.
Clean the electrical cooker with a wet cloth after using the electrical cooker. If there
is excessively getting dirty situation, you can clean it with water with detergent rather
well.
Heat for a few minutes for the upper part to dry after cleaning. If you will not use its
upper part for a while, ensure to occur a thin oil layer as oiling with machine oil.

4.4 USE OF OVEN P RT
4. 4. 1 Use of Oven Function Switches
This switch allows you to select the oven functions. The functions and their grades
are shown at the following table. Also, the detailed instructions and their uses will
also be explained in details in the next pages.
Your ovens lamp starts to operating.
Your ovens lamp, red warning lamp and fan start to operating.
It performs the function of defrosting your frozen food.
Your ovens thermostat and warning lamps and lower and upper heaters
start operating.
Your ovens thermostat and warning lamps and turbo heater, fan are put into
use.
Your ovens thermostat and warning lamps and fan, upper and lower
heaters start operating.
Your ovens thermostat and warning lamps and grill heater function start
operating.
Your ovens thermostat and warning lamps and upper heater, grill heater start
operating.
Your ovens thermostat and warning lamps and upper heater, grill heater and
fan functions start operating.
Your ovens thermostat and warning lamps,lower heater, turbo heater and
fan start operating.

Ice elter Function ( Defrost )
You can start the defrosting process by placing the frozen food into your oven and
turning the switch onto the determined sign. This is a program that does not cook the
food, just helps to defrost them in a very short time. Place the food that will be
defrosted on the third shelf support from the bottom, on a wire shelf. Place a tray into
the bottom of the oven in order to collect the water that occurs because of defrosting.
Lower - Upper Heater Function ( Static Cooking )
At this cooking that is defined as the traditional method, the heat that is spreaded
from the lower and upper heating elements into your oven equally, ensures the foods
buttom and top to be cooked equally.
It is recommended to make pre heating for 10 minutes. Leave the food that was put into
the available cooking dish to be cooked in recommended period case. The Lower-Upper
Heater location is the function that is preferred to cook cake, sponge cake, flan,
spaghetti in oven, lasagna, pizza.
At the end of cooking process, turn the ovens switch and heat set up switch off and
cancel the time program. Take the cooked food from the oven, put onto a safe place
and open the ovens door and ensure the oven is cool completely. As the oven will be
hot at that moment, stay away from the oven and keep your children
away from the oven.
Fan and Lower - Upper Heater Function ( Static Cooking with Fan)
The location where the air comes from lower and upper heating elements is distributed
into the oven via the fan motor and fanner.
The heat adjsutment switch is adjusted to the degree that is recommended at the
cooking table. Turn the ovens switch as it will show the symbol of this function and the
ovens time is adjusted to the recommended time for cooking, the oven is pre heated
for 10 minutes. The food that had been put into the available cooking dish is placed
into the oven and then cooked. In general, this location is a location where a very
nice results are taken for cooking of pastries. Every part of the food will be cooked
equally at this location. It is appropriate for cooking of single tray.
At the end of cooking, turn off the ovens switch and heat adjustment switch. Cancel
the ovens time program and take the cooked food from oven and leave it on a safe
place. Open your ovens lid and leave it to cool. Do not come close to it until it cools
and keep children away.

Turbo Fan and Lower heater Function
Turbo fan and lower heater function is an ideal function to cook pizza. The lower
heater ensures the pizza paste to be cooked while Turbo fan spreads the heat of
oven equally. Adjust the heat adjustment switch of your oven to the wished degree,
also turn the function switch as it will show this functions sign and adjust the ovens
time to the offered time for cooking and pre heat the oven for 10 minutes. This function
is appropriate for cooking of one dish.
At the end of cooking process, turn off the ovens switch and heat set up switch.
Cancel the ovens time program and take the cooked food from oven and leave onto
a safe place. Open your ovens door and leave it to cool. Do not come close to the
oven until it cools and keep children away.
Warning: Max. set of thermostat 1900C
Grill Function
This function is used to grill. To grill, place the food onto the grill, also
the grill onto the shelf at toppest level. You can start to grill after placing the oven tray
onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure the collection
of oils that drop from food.
Turn your ovens heat set up switch as it will show the sign of this function. Place
your food into the oven after pre heating of 5 minutes.
At the end of cooking, as in all other cooking processes; turn off the ovens switch
and heat set up switch. Cancel the ovens time program and take the cooked food from
oven and leave onto a safe place. Do not come close to the oven until it will cool and
keep children away.
Warning: Max. set of thermostat 1900C
Upper heater and Grill Function
This function is used to grill rapidly. To grill, place the food onto the grill, also
the grill onto the shelf at toppest level. You can start to grill after placing the oven tray
onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure collection of
oils that drop from food.
Turn your ovens heat set up switch as it will show the sign of this function. Place your
food into the oven after pre heating of 5 minutes.
At the end of cooking process, as in all other cooking processes; turn off the ovens
switch and heat set up switch. Cancel the ovens time program and take the cooked
food from oven and leave onto a safe place. Do not come close to the oven until it
cools and keep children away.
Warning: Max. set of thermostat 1900C

Grill, Upper Heater and Fan Function
In this function, grill and upper heater and the fan operate together and cook.
It is also used to grill.
To grill, place the food onto the grill, also
the grill onto the shelf at the toppest level. You can start to grill after placing the oven
tray onto the 3rd Shelf. The tray that is placed onto the 3rd Shelf will ensure collection
of oils that drop from food.
Turn your ovens heat set up switch as it will show the sign of this function. Place your
food into the oven after pre heating of 5 minutes.
At the end of cooking process, as in all other cooking processes; turn off the ovens
switch and heat set up switch. Cancel the ovens time program and take the cooked
food from oven and leave onto a safe place. Do not come close to the oven until it
cools and keep children away.
Warning: Max. set of thermostat 1900C

4. 4. 2 ccessories Used in Oven
You can use glass dishes, cake molds, special oven trays that are appropriate for use
in oven, that you are able to assure in market, apart from the oven trays and grill wire
chicken roasting skewer that are given together with your oven. Pay attention to the
information related to the subject that were given by the manufacturer firm.
In case small size dishes are used, place the dish onto the grill wire, as it will
completely be on the middle part of the wire. The following information must also be
followed for the enameled dishes.
If the food that will be cooked does not cover the oven tray completely, if the food is
taken from the deep freezer or the tray is being used for collection of foods juices that
flow during grilling, the form changes can be observed in tray because of the high
heat that occur during cooking or roasting.
The tray will return to its old form only when the tray cooled after cooking. This is a
normal physical event that occurs during heat transfer.
Do not leave this tray or dish in cold environment right away after cooking in glass tray
or dish. Do not put onto the cold and wet grounds. Place on a dry kitchen cloth or dish
cross, ensure it to cools slowly. Otherwise the glass tray or dish may be broken.
If you will grill in your oven; we recommend you to use the grill that was given in tray
together with product. ( If your product includes this material ) So, the oils that spatter
and flow, will not dirty the inside of oven. If you will use the big wire grill; put a tray onto
one of the lower shelves for oils not to be collected. Also put some water into it for
cleaning easiness.
Use 3th and 4th shelves while grilling and oil the grill for the ingredients that you will
grill not to stick to the grill.

5. Rack
4. Rack
3. Rack
2. Rack
1. Rack
Pan anti-tilting wire
To locate grid correctly in the cavity,
put it to any rack and push the grid up to the end.
The pan anti-tilting wire must be placed inside of the cavitiy.

Cleaning of Your Ovens Cover
In order to be able to clean the cover of your oven from inside and outside, use a glass
cleaner. Then rinse, dry it with a dry cloth. The cover can be pulled out for cleaning as shown
in the following figure.
* Open the cover completely.
* Pass the metal pin through the holes as shown on picture
* Do this process for both hinges.
* Lift up the cover slightly, pull towards the outside smoothly. The cover will completely
come out.
* Again place it into hinge holes while pinning the cover to its place.
Do not clean the ovens cover while the glass panels are hot. In case this measurement
is not taken, the glass panel may brake down. Contact to Authorized Service when
any problem occured.
5. 1 CLEANING
e sure that all control switches are off and your appliance cooled before cleaning
your oven. Plug off the appliance.
Control whether they are appropriate and recommended by the manufacturer before
using the cleaning materials on your oven. As they may damage the surfaces, do not
use caustic creams, abrasive cleaning powders, thick wire wool or hard tools. In case
the liquids that overflows around your oven burn, the enameled place may be
damaged. Immediately clean the overflew liquids.
Cleaning of Inside of Your Oven
Surely plug off the oven before starting cleaning.
The inside of enameled oven is cleaned in the best way when the oven is warm.
Wipe the oven with a soft cloth that had been hemmed in soapy water after each use.
Later wipe it with a wet cloth once more and then dry it. It may be required to use a
liquid cleaning material from time to time and make a complete cleaning. Do not clean
with dry and powder cleansers.
P RT 5 : CLE NING ND M INTEN NCE OF YOUR OVEN
5.2 M INTENENCE
Change of Oven Lamp
The change of oven lamp must be done by authorized technician. The rating the ampoule
should be 230V, 25Watt, Type E14,T300 before changing the lamp,the oven should be plugged
off and it should be cool.

6.1 Requirements Before Contacting to Service
If the oven does not operate;
The oven may be plugged off, there has been a blow-out. On models fitted with a
timer, time may not be regulated.
If the oven does not heat;
The heat may be not adjusted with ovens heater control switch.
If the interior lighting lamp does not light;
The electricity must be controlled.
It must be controlled whether the lamps are defective. If they are defective, you can
change them as following the guide.
Cooking ( if lower-upper part does not cook equally ) ;
Control the shelf locations, cooking period and heat values according to the manual.
Except these, if you still have any problem with your product, please call to the
Authorized Service.
6.2 Information Related to Transport
If you need any transport;
Keep the original case of product and carry it with its original case when needed to
be carried. Follow the transport signs on case.
Tape the cooker on upper parts, hats and heads and saucepan carriers to the
cooking panels.
Place a paper between the upper cover and cooking panel, cover the upper cover,
then tape it to the side surfaces of oven.
Tape cardboard or paper onto the front cover on interior glass of oven as it will be
suitable to the trays, for the wire grill and trays in your oven not to damage to the
ovens cover during transport.
Also tape the ovens covers to the side walls.
If it does not have the original case;
Take measure for the external surfaces (glass and painted surfaces) of oven against
possible blows.
PART 6 : SERVICE AND TRANSPORT

The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. y ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
52068209 02/12 R000