Kenmore Sears refrigerator User manual

Re rige 'ators
Record Your Model and Serial Numbers .............. Cover
Important Safety Instructions ....................................... 2
First Steps ....................................................................... 3
Energy Saving Ideas .............................................. ;....... 4
Setting the Controls ...................................................... 4
Temperatures ............................................................ 4
Energy Saver Switch ................................................ 4
Moisture .................................................................... 4
Fresh Food Storage ........................................................ 5
Care and Cleaning ..................................................... 6-7
Automatic Ice Maker (some models) ............................ 7
Reversible Door Instructions ................................... 8-,10
Avoid Service Checklist ......................................... 10-11
Normal Operating Sounds .......................................... 11
Sears Service ................................................................ !2
Refrigerator Warranty ................................................ 12
Sears Service in Canada .............................................. 13
Warranty (Canada) ...................................................... 14
Read and Save These Instructions
This Owner's Guide contains genera1operating instructions for your refrigerator and features information for several models
Your refrigerator may not have all the described features Use your refrigerator only as instructedin this guide These
instructionsare not meant to cover every possible condition and situation that mayoccur Common senseand caution must
be practiced when installing, operating, and maintaining any appliance
Record Your Model and Serial Numbers
Record the model and serial number in the space provided below The serial plate is located on the top left wail of the
refrigerator compartment
Model Number:
Serial Number:
Purchase Date:
PRINTEDINUSA P/N 218905300 (9812)

Important Safety
Instructions
Proper Disposal of
Your Refrigerator/Freezer
Risk of child entrapment
Child entrapment and suffocation are
not problems of the past Junked or
abandoned refrigerators or freezers are
still dangerous-- even if they will sit for
"just a few days" If you are getting rid
of your old refrigerator or freezer, please
follow the instructions below to help
prevent accidents,
BEFOREYOU THROW AWAY YOUR
OLD REFRIGERATORJFREEZER:
Remove
doors.
Leaveshelves
in place so
children may
not easily
climb inside.
Avoid fire hazard or
electric shock. Do not use an extension
cord or an adapter plug Do not remove
any prong from the power cord
Groundinc
wall
Power supply
cord witti 3-prong
grounding plug
Read all instructions before using this refrigerator.
For "(our Safety
Do not storeor usegasoline or other flammable vapors and liquids in the vicinity of
this or anyother appliance Readprod uct labelsfor flammability and other warnings,
Child Safety
= Destroy carton, plastic bags, and any exterior wrapping material immediately
after the refrigerator is unpacked. Children should never'use these items for
play, Cartons coveredwith rugs, bedspreads, plastic sheetsor stretch wrap may
become airtight chambers and can quickly cause suffocation
• Remove all staplesfrom the carton, Staples can cause severe cuts and destroy
finishes if they come in contact with other appliances or furniture
°An empty, discarded ice box, refrigerator or freezer is a very dangerous
attraction to chifdren Remove the door of any appliance that is not in use,
even if it is being discarded
Electrical Information
These guidelines must be followed to ensure that safety mechanisms in
the design of this refrigerator will operate properly.
°The refrigerator must be plugged into its own 1t5 Volt, 60 Hz, AC only
electrical outlet, The power' cord of the appliance is equipped with a three-
prong grounding plug for your protection against shock hazards. It must be
plugged directly into a properly grounded three-prong receptacle The
receptacle must be installed in accordance with local codes and ordinances
Consult a qualified electrician DO NOT USEAN EXTENSIONCORD OR AN
ADAPTERPLUG
o If voltage varies by 10 percent or more, performance of your refrigerator may
be affected Operating the refrigerator with insufficient power can damage the
compressor. Such damage is not covered under your warranty If you suspect
your voltage ishigh or low, consult your power company for testing,
. To prevent the refrigerator from being turned off accidentally, do not ptug the
unit into an outlet controlled by a wall switch or pull cord,
• Do not pinch, knot, or bend the power cord
Other Precautions
° Neverunplug the refrigerator bypulling on the power cord,Always grip the plug
firmly and pull straight out from the receptacle.
° To avoid electrical shock, unplug the refrigerator before cleaning and before
replacing a light bulb. Note: Turning the refrigerator control to OFFturns off
the compressor, but does not disconnect power to the light bulb or other
electrical components
• Do not operate the refrigerator in the presence of explosive fumes,
° Ifyour refrigerator hasanautomatic icemaker, avoidcontact with moving parts.

_ - _- __
First Steps
3= AIR SPACE
Clearance
Proper air circulation and leveling will
ensure efficient operation
Screw_type Levelers (some models)
LOWER
CABINET
CABINET
Exposed bolt (some models)
LOWER
CABINET
CABINET
Sunken bolt (some models)
Before starting the refrigerator, follow these important first steps:
Location
Choose a place that is near a grounded electrical outlet, DO NOT use an
extension cord or an adapter plug
= If possible, place the refrigerator out of direct sunlight and away from the
range, dishwasher or other heat sources
• The refrigerator must be installe_don a floor that is level and strong enough
to support a fully loaded refrigerator
• Consider water supply availability for models equipped with an automatic ice
maker
Installation
• Do not install the refrigerator where the temperature wilt drop below 60°F
(t 5°C) or riseabove t 10% (43°C) Thecompressor will not be able to maintain
proper temperatures
= Allow space around the unit for good air circulation, Leavea ! inch (25 ram)
space behind and a 3 inch (75 ram)space above the refrigerator for adequate
circulation
• In a recessed installation, allow an extra t/2 inch (10-15 ram) on each side
for ease of installation
o Forbest circulation, elevate the unit 1 inch (25 ram) from the floor, especially
if the floor iscarpeted
Door Opening
The doors should open to allow easyaccessto a counter when removing food
-Do not position the refrigerator so you have to walk around the refrigerator
doors
• Reversethe doors if necessary See "Reversible Door Instructions,"
Leveling
All four corners of refrigerator must rest firmly on a solid floor, Some models are
equipped witln adjustable screw-type levelers Others areequipped with rolters If
your refrigerator did not come with rollers, they canbe purchased from your dealer
Refer to the Toe Grille Assembly Instruction Sheetin the literature pack to remove
the Toe Grille (some models),
•To adjust screw-type levelers (some models): Tipcabinet back slightly and
raiseadjusting bolts as needed,
° To adjust front rollers (some models): Use a screwdriver, 3/8" socket
wrench, or nutdriver to adjust rollers as shown,
RAISETHE FRONT of cabinet enough so doors will close freely when opened
halfway Levelcabinet sideto side Referto the Toe GrilleAssembly Instruction Sheet
in the literature pack to replace the Toe Gritle (some models),
Cleaning
o Wash the inside, all removable parts and the outside with mild detergent and
warm water Wipe dry DO NOT USE HARSH CLEANERS ON THESE
SURFACES°
• Do not use razor blades or other sharp instruments which can scratch the
appliance surface, when removing adhesive labels, Any glue left from the
tape or energy label can be removed with a mixture of warm water and mild
detergent, or touch the residue with the sticky side of tape already removed,
. DO NOT REMOVETHESERIALPLATE

Energy Saving Ideas °Locate the refrigerator in the coolest part of the room, out of direct sunlight and
away from heating ducts or registers Do not place the refrigerator' next to heat-
producing appliances such asa range, oven or dishwasher, if this is not possible,
a section of cabinetry or an added layer of insulation between the two appliances
will help tile refrigerator operate more efficiently
•Level the refrigerator so the doors close tightly
• Refer to this Owner's Guide for the suggested refrigerator settings
•Periodiccleaning of the condenser will help the refrigerator run more efficiently,
See Outside in the "Care and Cleaning" section
• Do not overcrowd the refrigerator or block cold air vents Doing so causes the
refrigerator to run longer and usemore energy, Shelvesshould not be lined with
aluminum foil, wax paper or paper towelingUners interfere with cold air
circulation, making the refrigerator less efficient, which could cause food
spoilage
, Cover foods and wipe containers dry before placing them in the refrigerator, This
cuts down on moisture build-up inside the unit,
•Organize the refrigerator to reduce door openings Remove as marly items as
needed at one time and close the door as soon aspossible
Setting the Controls
_ _:.::C I_!LIII :': _TOR:: :i :, :::::/
RefrigeratorControl
Freezer Control
Energy Saver
Cool Down Period
Toensure safefood storage, allow the refrigerator to operate with the doors closed
for at least 8 to 12 hours before loading with food.
Refrigerator and Freezer Controls
° To start out, set control dials to the midpoint for a trial period of 24 hours
Temperatures
o After 24 hours, adjust the controls as needed. Adjust temperatures one
number at a time. For colder temperatures, turn the dial toward COLDEST.
Forwarmer temperatures, turn the dial toward COLD The temperature will
increase or decrease, but not necessarilyby 1, 2, or 3 degrees
An adjustment made to one compartment may require an adjustment to the other
o Turning the refrigerator control will change the temperature in BOTH
compartments If the refrigerator control is turned to OFF, cooling
stops in both compartments.
,, Turning the freezer control will change only the temperature in the freezer
compartment
To maintain temperatures, a fan circulates air in the refrigerator and freezer
compartments. Forgood circulation, do not block cold air vents with food items.
Energy Saver Switch (some models)
tfyour refrigerator isequipped with an Energy SaverSwitch, keep it set on ENERGY
SAVERfor lowest energy usage.
Moisture
During humid weather, or if moisture appears on the cabinet between the doors,
set switch to REDUCEEXTERIORMOISTUREA heater will warm the surface and
allow moisture to evaporate.
4

Fresh Food Storage
: i i :
Sliding Shelf
CantileverShelf
i
:i !i :
Combination Cantilever/Sliding Shelf (some models)
Humidity Control
Wine Rack
Shelf Adjustment
Refrigerator shelvesare easilyadjustable to suit individual needs Some models have
sliding shelves, others havecantilever shelves Before adjusting shelves, remove alf
food. Theshipping clipswhich stabilize the shelvesfor shipping may be removed and
discarded
Remove Shipping Clips
Toadjust sliding shelves, remove by pulling forward to
thestop position, then lift the front edge up and pull out.
Replaceon any pair of railsby reversing this procedure
To adjust cantilever shelves (shelves supported at the
rear of the refrigerator), tilt the back of the shelf up and
out Replace shelf by inserting hooks at rear into slots
Lower and lock into position
Toadjust combination cantilever/sfiding shefves,remove
shelf by lifting hook out of rear slot, and sliding shelf
forward to the stop position Lift up front edge and pull
out Replaceshelf by sliding shelf back on supports, and
inserting the hook into the respective middle slot
Spifl ProoFMgtassshelves(some models) catch and hold accidental spills. In some
models, the Spill ProofTM shelvesslideout for easyaccessto food and fast cleaning.
Theshelvesslideout independently of the cantilever brackets.Just pull front of shelf
forward Shelfcanbeextended asfar asstopper ,willallow and isnot removable from
the cantilever bracket.
Door Storage
Door racksand door binsallow convenient storage of jars,bottles, and cans Items
usedoften are availablefor quick selection Somemodels havedoor rackswhich can
accommodate gallon_size plastic drink containers and economy size jars and
containers which are available today
Somemodels haveadjustable door binswhich canbe moved to suit individual needs
Removebins by lifting straight up Placebins in the desired position and lower over
the supports
The Dairy compartment is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter
Crispers
The Crispers, located under the bottom refrigerator shelf, are designed for storing
fruits, vegetables, and other fresh produce, Wash items in clear water and remove
excesswater before placing inthe Crispers Items with strong odors or high moisture
should be wrapped before storing
TheHumidity Controls allows you to adjust the humidity within the Crisper Thiscan
extend the life of fresh vegetables which keep best in high humidity Leafy
vegetables, however, keep best when stored with the Humidity Control set on high
moisture, or in a drawer without a Humidity Control This keeps incoming air to a
minimum and maintains maximum moisture content
Meat Pan (some models)
Some models are equipped with a Meat Pan that can be positioned below any
refrigerator shelf Usethis pan for short term storage of bulk meat items tf meats
are to be kept longer than 1 or 2 days, they should be frozen
Wine Rack (some models)
The wine rack storesbottles of wine, or 2-liter plastic bottles of juice or soda pop.
To install,slide thewine rackonto the shelf with the curve facing in To remove, slide
the wine rack out Install on either side of a Spill Prooff_ shelf

Care and Cleaning
Damp objects stick to cold
metal surfaces Do not touch refriger-
ated surfaces with wet or damp hands
To avoid damage and help
the refrigerator run as efficiently as
possible, clean the condenser
periodically.
DEFROST
WATER
PAN
Keep your refrigerator and freezer cleanto prevent odor build-up Wipe up any spills
immediately and clean both sections at least twice a year Never use metallic
scouring pads, brushes,abrasivecleanersor strong alkaline solutions on any surface
Do not wash any removable parts in a dishwasher.
Always unplug the power cord from the wall outlet before cleaning. Turning
the control to OFFdoes not disconnect power to the controls, light bulb, or other
electrical components
Inside
Wash insidesurfacesof the refrigerator and freezer with a solution of 2 tablespoons
baking soda in ! quart warm water. Rinse and dry thoroughly, Be sure to wring
excess water out of sponge or cloth before cleaning around the controls,
light bulb, or any electrical parts.
Wash removable parts such asshelvesand drawers with baking soda solution or mild
detergent and warm water. DO NOT USE HARSH CLEANERS ON THESE SUR-
FACES.Rinseand dry thoroughly. Cleanthe door gaskets with mild suds, rinsewith
clearwater and wipe dry Do not userazor bladesor other sharp instruments which
canscratch the appliance surface when removing adhesive labels.Any glue left from
the tape or energy label can be removed with a mixture of warm water and mild
detergent, or, touch the residue with the sticky sideof tape already removed DO
NOT REMOVE THE SERIAL PLATE.
Outside
Wash the cabinetand handleswith warm water and mild tiquiddetergent_ Rinsewell
and wipe dry with a clean soft cloth
When moving the refrigerator, pull straight out Do not shift the refrigerator from
side to side asthis may tear or gouge the floor covering If the refrigerator has an
automatic ice maker, be careful not to move the refrigerator beyond plumbing
connections
Periodically clean the condenser (black tubes and wires on the back of the
refrigerator) Using a vacuum with its dusting tool attachment, vacuum the coilsto
remove dust build-up Do not allow lint or dust to accumulate on the coils,
Thedefrost water pan is located at the bottom rear of the refrigerator on top of the
compressor (shown left) The pan should be cleaned periodically. Wipe clean with
a damp cloth
Replacing the Light Bulb
To replace the light bulb:
1 Unplug the refrigerator.
2 Wear gloves asprotection against possible broken glass
3 Replace old bulb with an appliance bulb of the same wattage.
4. Remember to plug the refrigerator back in

Care and Cleaning
(continued)
Vacation and Moving Tips
Short vacations: Leavethe refrigerator operating during vacations of 1to 3weeks
Use up all perishable items from the refrigerator section Wrap and store other
items in thefreezer If the unit hasan automatic ice maker,turn off the icemaker.
Long vacations: Removeall food and iceifyou will be gone I month or more. Turn
the control to OFFand disconnect the power If the unit has an automatic ice
maker, turn off the ice maker and turn the water supply valve to the closed
position Defrost and clean the interior thoroughly Leaveboth doors open to
prevent odor and mold buildup Block open if necessary
Moving: When moving the refrigerator, follow these guidelines to prevent
damage:
• Remove all food and other items from both the refrigerator and freezer
compartments Empty the ice storage bin Defrost and clean the
interior thoroughly
•If a hand truck isused in moving, load the refrigerator from the side
o Turnfront rollers asfar up aspossible (some models) Thiswil! protect them
during sliding or moving
• The cabinet should be well padded and handled with care DO NOT
DROP°
Automatic ice Maker If your refrigerator hasan automatic ice maker, it will provide a continuous supply
of icefor normal use, Theautomatic ice maker isan optional accessorywhich may
be installed in most models at any time, Call your local dealer for installation
After the plumbing connections havebeen completed, the water supply valve must
be opened Placethe ice container under the ice maker, pushing it asfar back as
possible Lower the wire signal arm to its "down" or ON position Becauseof new
plumbing connections, the first production of ice cubes may be discolored or have
an odd flavor Throw the iceaway until the cubes made arefree of discoloration and
taste Rememberthat water quality determines your icequality tt isbest to connect
the ice maker to water that is not softened Chemicals from a malfunctioning
softener can damage the i,remaker If the ice maker isconnected to soft water,
ensure the softener ismaintained and working properly
To stop the ice maker, lift the wire signalarm until it clicksand locks in the "up"
or OFFposition Theice maker turns off automatically when the ice container isfull
If your model hasan adiustable freezer shelf, placethe shelf sothe wire signal arm
wil! hit the ice when the ice container is full.
Ice Maker Tips
1 Icestored too long may develop an odd flavor. Emptythe container and be sure
the wire signal arm is in its "down" or ON position The ice maker will then
produce more ice
2, Occasionally shake the container to keep ice separated
3 Keep the wire signal arm in its "up" or OFFposition until the refrigerator
isconnected to the water supply or whenever water supply is turned off
4 Certain sounds are normal when the ice maker is operating° They are:
Motor operation
Icebeing loosened from the tray
Ice being dropped into the container
Running water
Water valve opening and closing
Formore information on these operations, see "Normal Operating Sounds"
5. Wash ice container in warm water with mild detergent Rinsewell and dry
6 Stop the ice maker when cleaning the freezer or for short vacations
7 If the ice maker will be turned off for a long period of time, turn the water supply
valve to the closed position

Reversible Door
Instructions
NOTE: Some models have "pocket"
handles, which are recessedinto the
side of the door On these models,
only the hinges will need to be re-
versed A handle is built into both
sides of each door
1. Refer to the Toe Grille Assembly
Instruction Sheet in the literature pack to
remove the Toe Grille (some models)•
Snap off hinge cover at top of cabinet
(some models) With the freezer door
closed, remove the two screws attaching
upper hinge to cabinet Lift the hinge up
and off. Be sure to save screws and
hinge for reassembly later.
HingePln
Lower Hinge crews
or
Washer
_£)_ Htlnge
Pin
Lewe/Hinge Screws
4. Removehinge pin, hinge, and the two
screws attaching the lower hinge Save
the hinge, hinge pin, washer (some
models) and screws for reassembly
later.
Your refrigerator isequipped with convertible door hinges Hinging of the door can
be changed to the opposite side any time you wish An envelope containing extra
plastic hole plugs isincluded in some models Turn the refrigerator control to OFF,
Removeall food, bottles, and other items from the door Begin with freezer door
Completely remove one door before beginning the other,
Tools Necessary: ,_ _ !_ P_t_/
Phllll S__:_ I )R__!_O Adlu_oblo
screwdriver Wrench Set U _ Wrench
Pin
3, With the refrigerator door closed,
remove center hinge pin (Note the
arrangement of the upper and lower
washers (some models) on the hinge pin
The washers must be assembled later in the
same manner) Open refrigerator door
enough to allow door to be lifted off the
lower hinge Remove the two screws
attaching the center hinge The third
outermost screw under the center hinge
should be left in place Save hinge, pin,
and washers (some models) for
reassembly later. Reinstall screws in
original holes
5. Carefully remove the hole plugs from
the hinge holes in the center mullion and
top of cabinet and reinstall in the
opposite set of holes
_ Screws
Freeze_ Door
d
,_ _<-- Screw
RefrigeratorDoor
6. After the handles a_e removed (see
steps 7 and 8), remove door stop from
bottom of freezer and refrigerator door
and reinstallon opposite side

Reversible Door
Instructions (continued}
Freezer Door Lock Handle Over
Dovetail Sutton
Dovetai_
Sutton
HolePlug
crews
7, Reversehandleswhiledoorsareoff Removethe
two screwsattachingthe handleto the bottom of
the freezer door Swing bottom of handle away
from the door and slidehandleup and off dovetail
button Removescrew and dovetail button and
install on other side, moving hole plug from
corresponding hole to the opposite side, Reverse
instructions for reattaching handle, Start with
handle offset away from the door Placetop of
handleover dovetail buEon,swing handle into an
upright position and push upward, locking it into
place Securebottom of handlewith screws
Hinge Pin
Washer
i
Screws Lower Hlnge
or
Washer /
9. If your refrigerator doesnot havea ToeGrille,
usea putty knife to removethe plastic plug (not
shown) from front of base and reinstall in the
opposite set of lower hinge holes Assemble
lower hinge to cabinet Install hinge pin in
opposite hinge hole from which it was removed
Install the washer (some models) on the lower
hinge pin and insert hinge screws, but do not
tighten Hingeswill haveto remain looseagainst
cabinet to align door
Trim Lock Adhesive
Trim Lock
8, To remove handle: Pull
down to slidetrim off bottom of
handle Removethe two screws
attaching the handle to the top
of the refrigerator door Swing
the top of handle away from the
door andslide handledown and
off dovetail button Remove
screw and dovetail button and
installon otherside, movinghole
plugsfrom corresponding holes
to the opposite side Reverse
instructions for reattaching
handle Start with the handle
offset awayfrom the door Place
bottom of handle over dovetail
button, swing handle into an
upright position and push
downward, locking itinto place
Secure top of handle with
screws Replacetrim,
Trim Removal (Full-Length Trim models only):
In some models, the refrigerator door has a fu!! length trim piece which
continues from the bottom of the handle to the bottom of the door The top of
the trim fits around the base of the handle An adhesive "trim lock" ispositioned
about half-way down The bottom of the trim is held in place by either an
adhesive trim lock, or a trim lock with two prongs inserted into a hole on the
face of the door Remove the trim by gently pulling the trim lock areas out and
away from the door When the trim is free from the door, gently pull the trim
down and away from the base of the handle, using a slight side to side motion
To reattach trim: Slideboth trim locksout of trim Insertthe new adhesivetrim
lockscontained inyour literature pack NOTE: Trim lock must be removedand
installed by sliding OVERthe two donut shapedareas Install trim to handle by
sliding over baseof handle Carefully align trim and press down at trim lock
locations Replacehole plug on opposite side Userubbing alcohol to remove
any adhesiveresiduefrom old trim lock location(s)
.Center Hinge
(upside down)
Hole Plug
10. Turn center hinge upside down and secure to
cabinet as shown, using the screws which are in
the new holes Install refrigerator door on lower
hinge pin Align door with edge of cabinet Hold
the door on front of cabinet

•:_ -= ........
Reversible Door
Instructions (continued)
Washer
Hinge Pin
Cente_
11. Placeoriginal washer (some models)
over hole in refrigeratordoor and line up
hole in center hinge. Insert hinge pin
through both holes Placewasher (some
models) on hinge pin, then position
freezer door on center hinge
12. Remove plug from upper bearing
of door and reinstall on opposite side,
Hinge
13. Assembleupper hinge to top of cabinet
and door Useopposite set of holes Do not
completelytighten screws
Align doorssothereisa parallelgap between
doors Adjust doorsto cabinet so gasketsseal
but do not bind Tighten upper and lower
hinge screws
Additional adjustmentmay be necessaryafter
loading thedoor shelvesReturnfood, bottles,
and other articles to doors Turn the
refrigerator control on and to the
previous setting.
Referto the Toe Grille Assembly Instruction
Sheetinthe literaturepack to replacethe Toe
Grille (somemodels)
Avoid Service Checklist Before calling for service, review this list tt may save you both time and expense
This list includes common occurrences that are not the result of defective
workmanship or materials in this appliance
OCCURRENCE SOLUTION
RUNNING OF REFRIGERATOR
Refrigerator compressor does not
run. Refrigerator control is set to OFF Turn on refrigerator control See Setting the Controls_
Plug at wall outlet is disconnected Be sure plug is tightly pushed into outlet
House fuse has blown or circuit breaker has tripped Check and/or replace fuse with a 15 amp
time-delay fuse Reset circuit breaker
Power outage Check house lights Call local electric company
Refrigeratorrunstoo muchor too
long. Refrigerator islarger than the previous one you owned This isnorma!, Larger, more efficient units
require longer running time,
Room or outside weather is hot It is normal for the refrigerator to work longer under these
conditions
Automatic ice maker is operating (some models) Operation of the ice maker causes the
refrigerator to run slightly more
Doors areopened too frequently or too tong Warm air entering the refrigerator causes it to run
more Open the doors tessoften
Refrigerator or freezer door may be slightly open Make sure refrigerator islevel, Keep food and
containers from blocking door
TEMPERATURES ARE TOO COLD OR TOO WARM
Temperatures in either compartment are too cold or too warm See Setting the Controls.
10