Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord.
cleaner in a dry, indoor
area, on the floor with
the handle locked in the
upright position.
Electrical Shock and Personal injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage,
Review this table to find do-it-yourself
solutions for minor performance problems.
Any service needed, other than
maintenance described in this Owner's
Manual, should be performed by a Sears
or other qualified service agent.
Disconnect electrical supply before
performing maintenance to the
unit. Failure to do so could result in
electrical shock or personal injury.
Cleaner won't run
Cleaner won't pick
up or low suction
1,
2.
3.
4.
1.
2.
3.
4.
5.
6,
7.
8.
Dust escaping 1.
from cleaner 2.
3.
4.
Cleaner tools won't 1.
pick-up
2.
3.
Headlight not 1.
working 2.
Cleaner is difficult 1.
to push 2.
Performance 1.
indicator light turns
red 2.
3.
Height adjust Won't 1.
function 2.
Power cord not firmly plugged
into outlet.
Blown fuse or tripped breaker.
Thermal Protector activated.
Needs service.
Dirt container not installed
correctly.
Dirt container full.
Brushroll worn.
Belt is broken, worn or slipped
out of position.
One or both filters clogged.
Carpet height setting is
incorrect.
Hose clogged.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
Air directors need to be cleaned. 8.
Dirt container full. 1.
Dirt container not installed 2.
correctly.
Hose not installed correctly. 3.
One or both filters not installed 4.
completely.
Hose clogged. 1.
Dirt container full. 2.
One or both filters clogged. 3.
Bulb burnt out. 1.
Loose electrical wires. 2.
Carpet height setting is 1.
incorrect.
Belt is broken, worn or slipped 2.
out of position.
Plug unit in firmly.
Check fuse or breaker in home. Replace
fuse/reset breaker.
Allow cleaner to cool - Pg. E.
Take to Sears Service Center.
Review DIRT CONTAINER REMOVAL AND
REPLACEMENT- Pg. 11,12.
Empty dirt container - Pg. 11.
Replace brushroll- Pg. 13.
Replace belt - Pg. 13.
Remove filters and clean - Pg. 11,12.
Set carpet height adjust to appropriate
setting for carpet being cleaned - Pg. 9.
Check inlets, hose and dirt container for
obstructions; remove obstruction - Pg. 14.
If clog persists, call 1-877-839-2046.
Remove air directors and clean. Pg. 12.
Empty dirt container - Pg. 11.
Review DIRT CONTAINER REMOVAL AND
REPLACEMENT- Pg. 11,12.
Review hose placement- Pg. 6.
Review filter removal and replacement -
Pg. 11, 12.
Check inlets, hose and dirt container for
obstructions; remove obstruction -Pg. 14.
If clog persists, call 1-877-839-2046.
Empty dirt container - Pg. 11.
Clean filters - Pg. 11, 12.
Replace bulb - Pg. 14.
Take to Sears Service Center.
Set carpet height adjust lever to appropriate
setting for carpet being cleaned - Pg. 9.
Replace belt - Pg. 13.
Hose clogged. 1. Check inlets, hose and dirt container for
obstructions; remove obstruction - Pg. 14.
If clog persists, call 1-877-839-2046.
One or both filters clogged. 2. Remove filters and clean - Pg. 11,12..
Air directors need to be cleaned. 3. Remove air directors and clean. Pg. 12.
Internal breaker tripped. 1. Turn the unit off and then on to reset internal breaker.
Needs service. 2. Take to Sears Service Center.
For any questions, please call 1-877-839-2046.
15